Search NASA⌕ Search

SEARCH · Search NASA

Results for “SULFUR-DIOXIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

EVALUATION OF PROTON-CONDUCTING MEMBRANES FOR USE IN A SULFUR-DIOXIDE DEPOLARIZED ELECTROLYZER

The chemical stability, sulfur dioxide transport, ionic conductivity, and electrolyzer performance have been measured for several commercially available and experimental proton exchange membranes (PEMs) for use in a sulfur dioxide depolarized electrolyzer (SDE). The SDE's function is to produce hydrogen by using the Hybrid Sulfur (HyS) Process, a sulfur based electrochemical/thermochemical hybrid cycle. Membrane stability was evaluated using a screening process where each candidate PEM was heated at 80 C in 60 wt. % H{sub 2}SO{sub 4} for 24 hours. Following acid exposure, chemical stability for each membrane was evaluated by FTIR using the ATR sampling technique. Membrane SO{sub 2} transport was evaluated using a two-chamber permeation cell. SO{sub 2} was introduced into one chamber whereupon SO{sub 2} transported across the membrane into the other chamber and oxidized to H{sub 2}SO{sub 4} at an anode positioned immediately adjacent to the membrane. The resulting current was used to determine the SO{sub 2} flux and SO{sub 2} transport. Additionally, membrane electrode assemblies (MEAs) were prepared from candidate membranes to evaluate ionic conductivity and selectivity (ionic conductivity vs. SO{sub 2} transport) which can serve as a tool for selecting membranes. MEAs were also performance tested in a HyS electrolyzer measuring current density versus a constant cell voltage (1V, 80 C in SO{sub 2} saturated 30 wt% H2SO{sub 4}). Finally, candidate membranes were evaluated considering all measured parameters including SO{sub 2} flux, SO{sub 2} transport, ionic conductivity, HyS electrolyzer performance, and membrane stability. Candidate membranes included both PFSA and non-PFSA polymers and polymer blends of which the non-PFSA polymers, BPVE-6F and PBI, showed the best selectivity.

08 HYDROGEN↗

Predicting and validating the tracking of a Volcanic Ash Cloud during the 2006 Eruption of Mt. Augustine Volcano

On 11 January 2006, Mount Augustine volcano in southern Alaska began erupting after 20-year repose. The Anchorage Forecast Office of the National Weather Service (NWS) issued an advisory on 28 January for Kodiak City. On 31 January, Alaska Airlines cancelled all flights to and from Anchorage after multiple advisories from the NWS for Anchorage and the surrounding region. The Alaska Volcano Observatory (AVO) had reported the onset of the continuous eruption. AVO monitors the approximately 100 active volcanoes in the Northern Pacific. Ash clouds from these volcanoes can cause serious damage to an aircraft and pose a serious threat to the local communities, and to transcontinental air traffic throughout the Arctic and sub-Arctic region. Within AVO, a dispersion model has been developed to track the dispersion of volcanic ash clouds. The model, Puff, was used operational by AVO during the Augustine eruptive period. Here, we examine the dispersion of a volcanic ash cloud from Mount Augustine across Alaska from 29 January through the 2 February 2006. We present the synoptic meteorology, the Puff predictions, and measurements from aerosol samplers, laser radar (or lidar) systems, and satellites. UAF aerosol samplers revealed the presence of volcanic aerosols at the surface at sites where Puff predicted the ash clouds movement. Remote sensing satellite data showed the development of the ash cloud in close proximity to the volcano and a sulfur-dioxide cloud further from the volcano consistent with the Puff predictions. Lidars showed the presence of volcanic aerosol with consistent characteristics aloft over Alaska and were capable of detecting the aerosol, even in the presence of scattered clouds and where the cloud is too thin/disperse to be detected by remote sensing satellite data. The lidar measurements revealed the different trajectories of ash consistent with the Puff predictions. Dispersion models provide a forecast of volcanic ash cloud movement that might be undetectable by any other means but are still a significant hazard. Validation is the key to assessing the accuracy of any future predictions. The study highlights the use of multiple and complementary observations used in detecting the trajectory ash cloud, both at the surface and aloft within the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

A reversible zwitterionic SO 2 -binding organic liquid

As fossil fuel consumption continues, there is much attention being focused on capturing acid gas emissions from power plants. We have recently investigated SO 2 -binding organic liquids (SO 2 BOLs) as means to reversibly capture and release SO 2 selectively over CO 2 .1 SO 2 BOLs are mixtures of tertiary amines and alcohols, which bind SO 2 as liquid ammonium alkylsulfite salts. Tertiary amines selectively bind SO 2 over CO 2 because tertiary amines are basic enough to accept a proton from sulfurous and alkylsulfurous acids but not carbonic or alkylcarbonic acids. This is in contrast to other groups who absorb SO 2 physically in ionic liquids2-4 or chemically absorb SO 2 in organic systems5-7 or as irreversible aqueous bisulfite or sulfite salts.8-11 Our dual component SO 2 BOL ionic liquids can contain up to 47% SO 2 by mass, have low specific heats, and can be desulfoxylated by heating to 90ºC.1 We believed that a bifunctional tertiary alkanol amine would be able to capture SO 2 comparable to our binary SO 2 BOL system. We present here the first reversible zwitterionic liquid produced from the reaction of SO 2 with N,N-dibutylundecanolamine (DBUA). The SO 2 is chemically bound through the alcohol moiety as an alkylsulfite, which we believe is stabilized by hydrogen bonding through the protonated amine portion of the molecule. Our recent interest in SO 2 BOLs led us to explore the possible reaction of aprotic alkanolamines with SO 2 to form single-component SO 2 BOLs. A symbiotic pairing of the base and the alcohol on one molecule allows for a simple unimolecular system compared to the binary SO 2 BOL system. The bifunctional molecule also would have reduced volatility compared to tertiary amines due to increased hydrogen bonding from the alcohol moiety. To our knowledge there are few examples of zwitterionic liquids, and none of them have been shown to be reversible (polar to non-polar).12-14 Our first target molecule was N,N-dibutylundecanolamine because we envisioned long alkyl chains keeping the alkanolamine a liquid before and after exposure to SO 2 . N,N-dibutyldodecanolamine was synthesized in 88% isolated yield by refluxing dibutylamine and 11-bromoundecanol in ethanol.

08 HYDROGEN↗

Utilization of a By-product Produced from Oxidative Desulfurization Process over Cs-Mesoporous Silica Catalysts

We investigated the use of Cs-mesoporous silica catalysts to upgrade a by-product of oxidative desulfurization (ODS). Cs-mesoporous silica catalysts were chaeacterized through N2 adsorption, XRD, CO2-temperature-programmed desorption, and XRF. Cs-mesoporous silica prepared by the direct incorporation method showed higher catalytic performance than a Cs/MCM-41 catalyst by impregnation method for the catalytic decomposition of sulfone compounds produced from ODS process.

77 NANOSCIENCE AND NANOTECHNOLOGY↗