Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERSONIC SPEED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mobility of twinning dislocations in copper up to supersonic speeds

Understanding the mobility of twinning dislocations is important for multiscale modeling of crystal plasticity, especially at high strain rates, where such dislocations may reach transonic or supersonic speeds. Here, we used molecular dynamics simulations to investigate the relationship between dislocation velocity and the applied resolved shear stress of an edge twinning dislocation in copper up to supersonic speeds. The twinning dislocation mobility relation is composed of two branches separated by a band of forbidden velocities. The lower velocity branch is limited by the first transverse sound speed ~2000 m/s while the upper branch stretches from ~3500 m/s in the transonic regime to supersonic velocities. Twinning dislocations cannot undergo uniform steady-state motion at velocities within the forbidden band. Our simulation results also reveal that edge twinning dislocation motion in copper is kink-mediated. We discuss the implications of our findings for the motion of twins, twinning dislocations, and twinning dislocation kinks in copper.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quadrilateral particle arrangement within shocks in a two-dimensional dusty plasma

The microscopic structure within a two-dimensional shock was studied using data from a dusty plasma experiment. A single layer of charged microparticles, levitated in a glow-discharge plasma, was perturbed by an electrically floating wire that was moved at a steady supersonic speed to excite a compressional shock. A rearrangement of particles was observed, from a hexagonal lattice in the preshock into a quadrilateral microstructure on the front side of the shock. This quadrilateral structure would not be stable in a monolayer of identical repulsive particles, under equilibrium conditions. Glaser-Clark polygon analysis of the microstructure helped in identifying quadrilaterals. Voronoi analysis was used to characterize the defect fraction behind the shock, as an indication of shock-induced melting. Published by the American Physical Society 2025

Kananovich, Anton (ORCID:0000000225374952)↗
DOE OSTI2025

Cold Spray Field Deployment Evaluation for Double-Shell Tank 241-AN-105

This report highlights the documentation that supported Cold Spray field deployment in double-shell tank (DST) 241-AN-105 (AN-105) in July of 2025. This work was a collaborative effort between VRC Metal Systems (VRC), Robotic Technologies of Tennessee (RTT), the Hanford Tank Waste Operation and Closure (H2C) Chief Technology Office, H2C Tank Farm Projects Engineering, H2C Tank and Pipeline Integrity (TAPI) and H2C Ultrasonic Testing (UT) Operations & Support. Since 2019, the Chief Technology Office has been developing Cold Spray technology for refurbishing Hanford’s DSTs (RPP-RPT-65015). This technology is particularly relevant for addressing localized corrosion within the annulus of the DSTs by propelling metal powder particles at supersonic speeds to targeted areas. This process results in high-quality coatings characterized by high bond strength and low porosity result.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Equivalent equilibrium ion distributions in ion sources and beams

Ion sources and ion beams often contain ions of more than one charge-to-mass ratio, due to the presence of multiple ionization states and/or multiple atomic and molecular ion species in the source. We show that, under certain conditions, analysis of these systems can be simplified using the notion of “equivalent equilibrium ion distributions” (EEIDs). These distributions have identical ion trajectories, space-charge distributions, and electric-field distributions, but can be composed of ion species with arbitrary charge-to-mass ratios. We use this result to obtain multi-species generalizations for the perveance of an ion diode, which relates the diode voltage to the extracted beam current, and for the perveance of a drifting ion beam, which determines the axial length-scale for beam expansion due to the self-electric field. Applied to a quasi-neutral plasma ion source containing cold ions and hot electrons, we find that the location of the beam-plasma interface (meniscus), where ions are extracted from the plasma, depends on the electron density and ion energy per unit charge at the interface, independent of the ion composition. For certain types of numerical simulations, EEIDs allow one to calculate the beam optics of an intense multi-species ion source by doing a simulation for a single ion species with an artificial charge-to-mass ratio chosen to minimize computation time. We illustrate these results using the 3D particle-in-cell, finite-element code Aleph. The simulations show how ions in a plasma source self-consistently accelerate to the supersonic speed needed for steady, radially expanding flow. Multi-species equilibria are subject to streaming instabilities because, while the different species have the same kinetic energy per unit charge, their velocities scale with the square root of the charge-to-mass ratio. The simulations show that a strong ion streaming instability can occur in a multi-species plasma ion source.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Analysis of the density field around a supersonic conical projectile using quantitative schlieren

Quantitative schlieren imaging is a flow measurement technique that is capable of measuring density fields throughout refractive flowfields. The technique was applied here to measure the density field surrounding supersonic conical projectiles in free flight. Shock waves attached to a supersonic conical projectile offer a simple geometry with the well-established Taylor–Maccoll analytical flow solution to which these experimental measurements were compared. The schlieren images recorded a projection of the index of refraction field surrounding the 10° half-angle cones which was converted to density first through an Abel inversion and then the Gladstone–Dale law. Three Abel inversion methods—two-point, three-point, and arbitrary ray axisymmetric projection (ARAP)—were applied to deconvolute the three-dimensional flow within the constrained axisymmetric flow field. The resulting reconstructed density profiles were compared to the Taylor–Maccoll solution, parameterized by cone geometry and Mach number. The experimental density fields demonstrated strong agreement with the theoretical profiles. Experimental consistency was confirmed across various projectile speeds, demonstrating quantitative schlieren’s capability to accurately reconstruct the density of the flow field, even within the resolution constraints imposed by high-speed imaging. In conclusion, an assessment of experimental uncertainties in the density reconstruction was performed.

Abel Inversion↗
DOE OSTI2025

Development of advanced vacuum technologies for extending plasma pulse duration on EAST

Advanced vacuum technologies, including pumping, fueling and wall conditioning, have been successfully developed or upgraded to efficiently control the fuel and impurity particles to extend the plasma pulse duration in the experimental advanced superconducting tokamak (EAST). To improve the particle exhaust rate cryopumps with a 60% increase in pumping speed and ∼2 times increase in saturation capacity have been developed, and molecular pumps with a ∼30% increase in pumping speed have been upgraded. In order to monitor the molecular pump status while avoiding bearing faults and overload accidents, a fault detection system has been built which can offer an early warning to avoid more losses within the fusion device. A series of fueling technologies have been developed including gas injection system, supersonic molecular beam injector, pellet injector (PI), massive gas injector and shattered pellet injector, installed at the midplane and divertor positions at different ports to improve fueling uniformity and efficiency. Meanwhile, routine wall conditioning such as electric and hot N 2 baking, ion cyclotron wall conditioning and glow discharge cleaning have been successfully developed to remove the impurity particles from the inner component and materials. The low Z material wall coating and real-time powder injection during plasma discharge are also designed and applied to further improve particle control capability. Finally, by using these advanced vacuum related technologies, good vacuum (<2 × 10 −6 Pa) and wall conditions are realized, and the fuel and impurity particles can be effectively and stably controlled, which promotes the achievement of the record plasma of ∼1056 s pulse duration with the line-averaged electron density of 1.8 × 10 19 m −3 on EAST. They provide a very important reference for vacuum system design and operation for future fusion devices.

EAST↗
DOE OSTI2025

Nonseeded linewise temperature measurements by resonantly ionized photoemission thermometry in a Mach 4 Ludwieg tube

A one-dimensional (1D) thermometry using oxygen-tagging resonantly ionized photoelectron thermometry (O 2 RIPT) was employed to investigate thermal gradients within a Mach 4 Ludwieg tube. The Ludwieg tube is pulsed with a test duration of approximately 100 ms, providing a cold supersonic flow at Mach 4 ideal for studying aerothermal effects. This study focused on measuring freestream temperatures, capturing shock-induced heating behind a detached bow shock from a blunt cylinder, and resolving sharp temperature variations across a bow shock generated by a cylinder. The O 2 RIPT technique produced strong emission signals extending approximately 4 cm long, demonstrating its capability for precise temperature measurements in high-speed wind tunnel environments. The results confirm that O 2 RIPT is well-suited for applications in large-scale aerodynamic testing facilities, particularly in regions with strong compression effects, enabling the resolution of sharp thermal gradients. This method presents a promising solution for thermometry in dynamic flow conditions relevant to various experimental ground-test facilities.

McCord, Walker (ORCID:0000000179747550)↗
DOE OSTI2024

Effect of insulator end cap thickness on time-dependent Hartmann flow in a rotating mirror

We present a framework for analysing plasma flow in a rotating mirror. By making a series of physical assumptions, we reduce the magnetohydrodynamic (MHD) equations in a three-dimensional cylindrical system to a one-dimensional system in a shallow, cuboidal channel within a transverse magnetic field, similar to the Hartmann flow in ducts. We then solve the system both numerically and analytically for a range of values of the Hartmann number and calculate the dependence of the plasma flow speed on the thickness of the insulating end cap. We observe that the mean flow overshoots and decelerates before achieving a steady-state value, a phenomenon that the analytical model cannot capture. This overshoot is directly proportional to the thickness of the insulating end cap and the external electric field, with a weak dependence on the external magnetic field. Our simplified model can act as a benchmark for future simulations of the supersonic mirror device CMFX (centrifugal magnetic fusion experiment), which will employ more sophisticated physics and realistic magnetic field geometries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The OSIRIS-REx Sample Return Capsule re-entry: A coordinated seismo-acoustic observational campaign for the study of meteor phenomena

Objects entering Earth’s atmosphere at hypersonic velocities may generate powerful acoustic waves. Depending on atmospheric conditions and acoustic propagation paths, they may be captured using ground or balloon-borne microbarometers and microphones. Impacts into the Earth’s atmosphere by asteroids in a meter-size range are sporadic and unannounced, and thus, well-documented scientific observations of asteroids are rare and generally happen by chance. Arriving from interplanetary space at hypervelocity, spacecraft are considered analogues for low velocity meteoroids and asteroids impacting the Earth’s atmosphere, and as such provide unprecedented and unique opportunity to carry out planned observational campaigns and perform detailed studies of meteor phenomena. However, since the end of the Apollo era, only four instances of a hypersonic re-entry of an artificial body from interplanetary space with an incident speed of 11-12 km/s have been observed and studied. These were the Sample Return Capsules (SRCs) that brought physical samples of extraterrestrial material back to Earth (Genesis, Stardust, Hayabusa 1, Hayabusa 2). These re-entries were also detected by infrasound and/or seismic sensors. The next opportunity to observe an artificial meteor will be on 24 September 2023 with the re-entry of NASA’s OSIRIS-REx SRC that will bring samples of the carbonaceous near-Earth asteroid Bennu. The re-entry consists of several flight phases, including hypersonic and supersonic, providing a unique opportunity to observe these by infrasound and seismic sensors. We will discuss observational campaign efforts aimed to capture geophysical signals generated by the OSIRIS-REx SRC re-entry. This campaign utilizes an unparalleled number of instruments, both ground and airborne, strategically positioned in the immediate and extended region around the projected re-entry trajectory to maximize the scientific output.

47 - OTHER INSTRUMENTATION↗
DOE OSTI2025

An experimental platform for investigating astrophysically relevant magnetized plasma jets on the COBRA facility

A new platform has been developed for the 1-MA COBRA generator to investigate the physical processes affecting the formation, collimation, and stability of high-speed outflows in magnetically driven laboratory plasma jets. Such experiments serve as diagnostically accessible surrogates for astrophysical jets under the assumption that the underlying dynamics are scale invariant. In contrast to previous current driven high energy density laboratory jet experiments that use radial/conical wire arrays or foils, the platform described here uses azimuthally symmetric gas-puff injection. This avoids the ablation phase from a solid target, allowing the jets to develop earlier and be driven longer without depleting their mass source and disrupting. A permanent magnet provides an initial poloidal magnetic field, which links the two concentric electrodes and mimics the boundary conditions of a star-accretion disk system. Extended magnetohydrodynamic effects can be assessed using a polarity convolute, which allows for reversal of the electrode bias. The resulting plasma jets exhibit remarkable stability, persisting for hundreds of nanoseconds and achieving aspect ratios ≳30:1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗