SEARCH · Search NASA

Results for “SWG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

13 records

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Cost-Benefit Analysis For Indonesia Building Sector: Whole-Building Cooling Solutions

The Net Zero World (NZW) Initiative Collaborative Work Program with the Government of Indonesia (GoI) includes technical assistance and investment mobilization facilitation to accelerate deployment of energy efficiency technologies and solutions for the building sector. A February 2023 U.S.–Indonesia Joint Workshop on Decarbonizing the Building Sector yielded a NZW Indonesia Building Decarbonization Working Group (NZW IBDWG) with four sub-working groups (SWG): SWG-A National Center, SWG-B Capacity Building, SWG-C Investment and Financing, and SWG-D Pilot Projects. Technical analysis of whole-building cooling solutions for tropical climates of Indonesia was conducted by SWG-A to quantify energy savings, carbon dioxide reductions, and comfort improvements offered by 12 passive or low-energy cooling strategies: ceiling fans with and without thermostat setbacks; cool roofs; cool walls; exterior awnings; exterior shades; interior shades; insulated roofs; insulated walls; low-e windows; solar window films; and natural ventilation. Leveraging the results from SWG-A, cost-benefit analysis (CBA) was conducted by SWG-C to assess the consumer and national costs and impacts associated with these 12 cooling solutions. The evaluation involved estimating life-cycle costs (LCC), payback period (PBP), net present values (NPV), annual electricity burden change for low-income households, and reduced national annual power-sector generation demand by 2030, 2040, 2050, and 2060. This evaluation can help guide Indonesia’s Just Energy Transition Partnership (JETP) investments in policies and programs to advance research, development, deployment, and commercial adoption (RDDCA) of efficient residential building sector cooling technologies and solutions in Indonesia. Four key energy conservation measures (ECM) have been identified to reduce air-conditioning (AC) energy demand in single-family housing in Indonesia: ceiling fan with temperature setback (to 28.1 °Celcius from 25 °C); insulated walls; insulated roof; and cool roof. This study found that low-income households with AC installations in Indonesia currently face a high energy cost burden of approximately 10%. However, by implementing a ceiling fan with temperature setback, this burden could decrease to 2.5% today and further reduce to 1.3% by the year 2060. The PBP for a ceiling fan with temperature setback is one year, indicating one of the lowest LCC and best NPV. In the planned upcoming phase of CBA, a series of building cooling improvement scenarios can be further defined, incorporating more than one ECM in combination with socio-economic factors evaluated in the initial CBA phase. Additionally, the analysis of ECM effects in multifamily housing can be expanded. This broader national analysis aims to encompass a holistic and comprehensive system-level perspective, including factors such as avoided power sector infrastructure investments, domestic job creation, domestic manufacturing job creation, and gross domestic product (GDP) growth.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2026

Corn and Switchgrass Derived Sustainable Aviation Fuel Carbon Intensity

The production and use of sustainable aviation fuel (SAF) could lower aviation's carbon footprint. Feedstock agricultural management can optimize—or potentially determine—SAF sustainability and profitability, but long-term SAF feedstock comparisons are limited. Life cycle assessments (LCA) are commonly used to estimate the carbon intensity of producing SAF from emerging feedstocks due to the limited availability of long-term, primary field data. We quantified the agricultural phase and well-to-wake (WTWa) carbon intensities of producing SAF from no-till, continuous corn (Zea mays L.) under 120 kg N ha−1 year−1 (120 N corn) and switchgrass (Panicum virgatum L.) under 60 or 120 kg N ha−1 year−1 (60 N and 120 N SWG, respectively) via LCAs based on measured data from a long-term (1998-present) field experiment on marginally productive cropland located in Eastern NE, USA. Measured data included crop productivity, long-term changes in soil organic carbon (SOC) stocks (0–150 cm), annual soil N2O emissions, and field management practices. Both 120 N corn (2078 L ha−1) and 120 N SWG (1752 L ha−1) produced more SAF than 60 N SWG (1229 L ha−1) (p < 0.0001). However, making SAF from corn had greater life cycle GHG emissions (i.e., WTWa carbon intensity) than making SAF from 120 N and 60 N SWG (61.5 > −14.5 and −27.5 g CO2e MJ−1 SAF, respectively; p = 0.0007), primarily due to SOC accrual during crop production. Here, we demonstrate that agricultural management (e.g., crop type, fertilizer use) can determine the sustainably and productivity of producing SAF by using long-term, measured field data in LCAs.

carbon intensity↗

DOE OSTI2023

Broadband integrated polarization splitter and rotator using subwavelength grating claddings

We present a broadband integrated photonic polarization splitter and rotator (PSR) using adiabatically tapered coupled waveguides with subwavelength grating (SWG) claddings. The PSR adiabatically rotates and splits the fundamental transverse-magnetic (TM 0 ) input to the fundamental transverse-electric (TE 0 ) mode in the coupler waveguide, while passing the TE 0 input through the same waveguide. The SWGs work as an anisotropic metamaterial and facilitate modal conversions, making the PSR efficient and broadband. We rigorously present our design approaches in each section and show the SWG effect by comparing with and without the SWG claddings. The coupling coefficients in each segment explicitly show a stronger coupling effect when the SWGs are included, confirmed by the coupled-mode theory simulations. The full numerical simulation shows that the SWG-PSR operates at 1500–1750 nm (≈250 nm) wavelengths with an extinction ratio larger than 20 dB, confirmed by the experiment for the 1490–1590 nm range. The insertion losses are below 1.3 dB. Since our PSR is designed based on adiabatical mode evolution, the proposed PSR is expected to be tolerant to fabrication variations and should be broadly applicable to polarization management in photonic integrated circuits.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Phase II Cost-Benefit Analysis: Economic Impact Assessment For Indonesia Building Sector Whole-Building Cooling Solutions

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

Anisotropic leaky-like perturbation with subwavelength gratings enables zero crosstalk

Abstract Electromagnetic coupling via an evanescent field or radiative wave is a primary characteristic of light, allowing optical signal/power transfer in a photonic circuit but limiting integration density. A leaky mode, which combines both evanescent field and radiative wave, causes stronger coupling and is thus considered not ideal for dense integration. Here we show that a leaky oscillation with anisotropic perturbation rather can achieve completely zero crosstalk realized by subwavelength grating (SWG) metamaterials. The oscillating fields in the SWGs enable coupling coefficients in each direction to counteract each other, resulting in completely zero crosstalk. We experimentally demonstrate such an extraordinarily low coupling between closely spaced identical leaky SWG waveguides, suppressing the crosstalk by ≈40 dB compared to conventional strip waveguides, corresponding to ≈100 times longer coupling length. This leaky-SWG suppresses the crosstalk of transverse–magnetic (TM) mode, which is challenging due to its low confinement, and marks a novel approach in electromagnetic coupling applicable to other spectral regimes and generic devices.

42 ENGINEERING↗

DOE OSTI2023

Topics and Considerations for Developing State Geothermal Regulations

The intent of this document is to provide guidance to states for developing geothermal regulations that would be inclusive of all geothermal technologies (e.g., conventional and non-conventional power production and direct-use applications) with applicability in all states. As part of this project, the NREL project team reviewed and catalogued existing state and federal geothermal regulations, compiled best practices from geothermal and other extractive industries, and established a Geothermal Regulatory Stakeholder Working Group (SWG) to advise and review the geothermal regulatory guidance. The SWG met approximately monthly over the course of one year to review and discuss specific topics as relevant to this geothermal regulatory guidance. This report is broken into five main sections, which were identified in coordination with the SWG as the main topics for inclusion. Within these sections, a list of considerations within each category were identified and, in some cases, relevant examples from existing state and federal geothermal regulations are included to further illustrate the proposed considerations. This report includes the following topics: geothermal resource definition; leasing process; exploration approval process; drilling/wellfield development approval process; and underground injection control process.

15 GEOTHERMAL ENERGY↗

DOE OSTI2023

Triaxial Shear Tests on Simulated Sierra White Fault Gouge & Borehole Simulation in Sierra White Gouge

Laboratory shear tests were conducted on pulverized Sierra White granite (SWG) to investigate slip mechanisms in naturally occurring faults. Synthetic fault geometries were constructed by sandwiching fine grained SWG powder in between steel forcing blocks. For dry experiments, ~3.5 g of SWG powder was poured onto the face of the lower steel forcing block and leveled. For saturated experiments, enough fluid was added to the ~3.5 g of Sierra White granite powder to form a slurry. This slurry was applied to the lower forcing block and leveled. Inclined forcing blocks with 25.4 mm diameter and 35° faces, which were machined from ground steel rods with fine teeth on the faces, help to hold the gouge in place and prevent delamination at the interface. The top forcing block had a 2.03 mm centered hole to allow pore fluid access to the gouge. A fine steel mesh prevented back flow of the gouge into pore fluid lines. Samples were isolated from the confining medium using three layers of heat shrink polyolefin, as shown in Figure 1. The outer layer was shrunk over the o-rings on the end caps to form an impermeable seal, which was reinforced with steel tie wires on both sides of the o-rings. Hardened steel spacers and copper shim stock was placed between the steel forcing blocks and the end caps to preserve the parallelism of the Hastelloy wetted parts. For dry samples, the end caps were plugged, while the end caps for the saturated samples were connected to pore lines.

58 GEOSCIENCES↗

DOE OSTI2023

Topics and Considerations for Developing State Geothermal Regulations

The intent of this document is to provide guidance to states for developing geothermal regulations that would be inclusive of all geothermal technologies (e.g., conventional and non-conventional power production and direct-use applications) with applicability in all states. As part of this project, the NREL project team reviewed and catalogued existing state and federal geothermal regulations, compiled best practices from geothermal and other extractive industries, and established a Geothermal Regulatory Stakeholder Working Group (SWG) to advise and review the geothermal regulatory guidance. The SWG met approximately monthly over the course of one year to review and discuss specific topics as relevant to this geothermal regulatory guidance. This report is broken into five main sections, which were identified in coordination with the SWG as the main topics for inclusion. Within these sections, a list of considerations within each category were identified and, in some cases, relevant examples from existing state and federal geothermal regulations are included to further illustrate the proposed considerations. This report includes the following topics: 1) Geothermal Resource Definition; 2) Leasing process; 3) Exploration approval process; 4) Drilling/wellfield development approval process; 5) Underground injection control process In addition, a list of 'key considerations' summarized from this report are included below. This list is not meant to be exhaustive as each state's regulatory landscape is unique, rather these are meant to be concepts that can be considered when developing and/or updating existing geothermal regulations.

drilling↗

DOE OSTI2023

Near-Term Effects of Perennial Grasses on Soil Carbon and Nitrogen in Eastern Nebraska

Incorporating native perennial grasses adjacent to annual row crop systems managed on marginal lands can increase system resiliency by diversifying food and energy production. This study evaluated (1) soil organic C (SOC) and total N stocks (TN) under warm-season grass (WSG) monocultures and a low diversity mixture compared to an adjacent no-till continuous-corn system, and (2) WSG total above-ground biomass (AGB) in response to two levels of N fertilization from 2012 to 2017 in eastern Nebraska, USA. The WSG treatments consisted of (1) switchgrass (SWG), (2) big bluestem (BGB), and (3) low-diversity grass mixture (LDM; big bluestem, Indiangrass, and sideoat grama). Soils were sampled at fixed depth increments (0–120 cm) in the WSG plots and in the adjacent corn experiment in 2012 and 2017. Soil stocks (Mg ha−1) of SOC and TN were calculated on an equivalent soil mass (ESM) basis and compared within the three WSG treatments as well as between experiments (corn compared to the mean of all WSGs). Soil organic C and TN stocks within soil layers and cumulative stocks responded to the main effect of WSG (PWSG < 0.05) but were no different when comparing the WSGs to corn (Pexpt = NS). Both SOC/TN stocks and cumulative stocks were generally greater in the LDM compared to the BGB. Neither SOC nor TN changed over time under either the WSGs or corn. Warm-season grass AGB responded to a three-way interaction of year, N rate, and WSG (p = 0.0007). Decreases in AGB over time were significant across WSGs and N levels except for SWG at 56 kg N ha−1 and LDM at 112 kg N ha−1. Above-ground biomass was generally greater in the LDM after the first harvest year (2013). Results suggest that incorporating WSGs into marginal cropland can maintain SOC and TN stocks while providing a significant source of biomass to be used in energy production or in integrated livestock systems.

Ramirez, II, Salvador (ORCID:000000030152153X)↗

DOE OSTI2025

Tailored Frequency Conversion in Nonlinear Subwavelength Grating Metaslabs

The use of metaslab waveguides consisting of subwavelength gratings (SWGs) is proposed as a highly flexible approach to obtain phase‐matched frequency conversion in nonlinear integrated devices. Control over the phase matching (PM) condition is achieved through modification of the linear modal propagation constants by the SWG. The method is experimentally demonstrated by fabrication of 0.4 mm‐long GaAs metaslabs designed for second harmonic generation of near‐infrared light. A controlled spectral shift of up to 100 nm in the PM condition, relative to a uniform slab is observed. Excellent agreement is found between the experimental results and finite‐difference eigenmode simulations, which predict a tunable frequency conversion bandwidth of ∼300 nm for the design parameters. The different regimes of PM control supported by the structure are discussed. This work highlights the potential of SWGs as building blocks for tailored frequency conversion in nonlinear integrated devices.

Form birefringence↗

DOE OSTI2022

At-Line Sampling and Characterization of Pyrolytic Vapors from Biomass Feedstock Blends Using SPME-GC/MS-PCA: Influence of Char on Fast Pyrolysis

Solid-phase microextraction (SPME) coupled with GC-MS analysis was used for at-line sampling of pyrolytic vapors produced during fast pyrolysis of biomass. The pure and binary blends of switchgrass (SWG) and pine harvest residues (PT6) were used as feedstock. Sequential SPME sampling allowed for monitoring of changes in the pyrolysis vapors as char accumulated in the fluid bed. The concentration and composition of the vapors desorbed from the SPME fibers were investigated using GC-MS, and the data sets were then analyzed using principal component analysis (PCA) to compare the composition of the pyrolysis vapors over the course of the pyrolysis run. The chemical composition of both carbohydrate and lignin fragments varied as the char builds up in the reactor bed. Fragments derived from cellulose and xylan included anhydrosugars, furans and light oxygenated compounds. Lignin fragments included methoxyphenols, phenolic ketones and aldehydes, low molecular weight aromatics. The composition of the carbohydrate fragments changed more than the lignin fragments as the char build-up in the fluid bed. This combination of SPME-GC/MS-PCA were a novel, easy and effective method for measuring the composition and changes in the composition of pyrolysis vapors during the fast pyrolysis process. Here, this work also highlighted the effect of char build-up on the composition of the overall pyrolysis vapors.

09 BIOMASS FUELS↗

DOE OSTI2024

Integrated polarization-free Bragg filters with subwavelength gratings for photonic sensing

We present polarization-free Bragg filters having subwavelength gratings (SWGs) in the lateral cladding region. This Bragg design expands modal fields toward upper cladding, resulting in enhanced light interaction with sensing analytes. Two device configurations are proposed and examined, one with index-matched coupling between transverse electric (TE) and transverse magnetic (TM) modes and the other one with hybrid-mode (HM) coupling. Both configurations introduce a strong coupling between two orthogonal modes (either TE-TM or HM 1 -HM 2 ) and rotate the polarization of the input wave through Bragg reflection. The arrangements of SWGs help to achieve two configurations with different orthogonal modes, while expanding modal profiles toward the upper cladding region. Our proposed SWG-assisted Bragg gratings with polarization independency eliminate the need for a polarization controller and effectively tailor the modal properties, enhancing the potential of integrated photonic sensing applications.

Optics↗

DOE OSTI2023

Utah FORGE 5-2557: Trixial Shear and Wellbore Breakout Tests Report and Data

Included are a report and data from triaxial shear tests on simulated Sierra White fault gouge and a borehole stimulation experiment. This serves as a progress report for the Role of Fluid and Temperature in Fracture Mechanics and Coupled Thermo-Hydro-Mechanical-Chemical (THMC) Processes for Enhanced Geothermal Systems project by Purdue University (Utah FORGE R&D project 5-2557). Tests were done with Sierra White granite (SWG) to investigate slip mechanisms and to evaluate the fracture initiation and propagation from a geothermal borehole. Raw data is provided alongside a report on all experimental testing protocols, experimental design, and results.

15 GEOTHERMAL ENERGY↗