Search NASA⌕ Search

SEARCH · Search NASA

Results for “Satellite Laser Ranging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Discovering $\mu$Hz gravitational waves and ultra-light dark matter with binary resonances

In the presence of a weak gravitational wave (GW) background, astrophysical binary systems act as high-quality resonators, with efficient transfer of energy and momentum between the orbit and a harmonic GW leading to potentially detectable orbital perturbations. In this work, we develop and apply a novel modeling and analysis framework that describes the imprints of GWs on binary systems in a fully time-resolved manner to study the sensitivity of lunar laser ranging, satellite laser ranging, and pulsar timing to both resonant and nonresonant GW backgrounds. We demonstrate that optimal data collection, modeling, and analysis lead to projected sensitivities which are orders of magnitude better than previously appreciated possible, opening up a new possibility for probing the physics-rich but notoriously challenging to access $\mu\mathrm{Hz}$ frequency GWs. We also discuss improved prospects for the detection of the stochastic fluctuations of ultra-light dark matter, which may analogously perturb the binary orbits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

MiniCarb: a passive, occultation-viewing, 6U CubeSat for observations of CO 2 , CH 4 , and H 2 O

In this report we present the final design, environmental testing, and launch history of MiniCarb, a 6U CubeSat developed through a partnership between NASA Goddard Space Flight Center and Lawrence Livermore National Laboratory. MiniCarb’s science payload, developed at Goddard, was an occultation-viewing, passive laser heterodyne radiometer for observing methane, carbon dioxide, and water vapor in Earth’s atmosphere at ~1.6 µm s -1 . MiniCarb’s satellite, developed at Livermore, implemented their CubeSat Next Generation Bus plug-and-play architecture to produce a modular platform that could be tailored to a range of science payloads. Following the launch on 5 December 2019, MiniCarb traveled to the International Space Station and was set into orbit on 1 February 2020 via Northrop Grumman’s Cygnus capsule which deployed MiniCarb with tipoff rotation of about 20° s (significantly higher than the typical rate of 3° s -1 from prior CubeSats), from which the attitude control system was unable to recover resulting in a loss of power. In spite of this early failure, MiniCarb had many successes including rigorous environmental testing, successful deployment of its solar panels, and a successful test of the radio and communication through the Iridium network. This prior work and enticing cost (approximately $\$2$ M for the satellite and $\$$250 K for the payload) makes MiniCarb an ideal candidate for a low-cost and rapid rebuild as a single orbiter or constellation to globally observe key greenhouse gases.

47 OTHER INSTRUMENTATION↗

Coastal-Fog Microphysics Using In-Situ Observations and GOES-R Retrievals

Here, the objective of this work is to evaluate GOES-R based fog conditions occurred during the C-FOG (Toward Improving Coastal Fog Prediction) field campaign. C-FOG is designed to advance understanding of fog formation, development, and dissipation over coastal environments to improve its predictability. The project took place along coastlines and open water environments of Eastern Canada (Nova Scotia, NS and the Island of Newfoundland, NL) during August-October of 2018 where environmental conditions play an important role for late season’s fog formation. During the C-FOG field campaign, instruments were located at the Ferryland Supersite, NL, with 2 main sites, and five satellite sites, as well as on the Research Vessel (R/V) Hugh R. Sharp. Key measurement instruments included a Gondola carrying a CDP (cloud droplet probe) and a BCP (backscatter cloud probe) was used for measuring droplet spectra from 1-75 µm on the R/V. A LPM (laser precipitation monitor) with 100 µm-1 cm size range and an OPC (optical particle counter) with 0.3-17 µm at 16 spectral channels provided information for fog and drizzle discrimination. Remote sensing platforms (e.g. profiling microwave radiometer, PMWR), Ceilometer, Lidar), meteorological towers, tethered balloons, and GOES-R products (e.g. fog coverage and droplet size and liquid water path) were used to evaluate fog over horizontal and vertical dimensions. Results suggest that effective radius, phase, liquid water path, and liquid water content values obtained from GOES-R and PMWR were comparable to ground based in-situ observations. It is concluded that integration of observations and nowcasting products may help improve short term local fog predictions.

54 ENVIRONMENTAL SCIENCES↗

Inhomogeneous broadening and splitting of lines in spectra of YAG : Tm

The shape and fine structure of lines due to Tm{sup 3+} f −f electronic transitions in multifunctional Y{sub 3}Al{sub 5}O{sub 12} garnet crystals have been studied by high-resolution spectroscopy. The observed inhomogeneously broadened lines have a Lorentzian shape, suggesting that point defects make a predominant contribution to the inhomogeneous broadening. Moreover, Y{sub Al} antisite defects, which are formed during high-temperature melt growth, produce spectral satellites near the main lines. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray observations of Ne-like Xe and satellites from C-Mod tokamak plasmas

We discuss X-ray spectra in the wavelength range from 2.70 to 2.76 °A from xenon (Z = 54) in near neon-like charge states have been observed in Alcator C-Mod tokamak plasmas. The 3D (2p 6 - (2p 5 ) 3/2 3d 5/2 , 2720.4 m°A) and 3F (2p 6 - (2p 5 ) 1/2 3s 1/2 , 2729.0 m°A) transitions from neon-like Xe 44+ have been identified, along with nearby Na-, Mgand Al-like satellites. The intensity ratio of 3D to the Mg-like satellite near 2.74 °A increases strongly with electron temperature in the range from 3 to 4 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wind redistribution of snow impacts the Ka- and Ku-band radar signatures of Arctic sea ice

Wind-driven redistribution of snow on sea ice alters its topography and microstructure, yet the impact of these processes on radar signatures is poorly understood. Here, we examine the effects of snow redistribution over Arctic sea ice on radar waveforms and backscatter signatures obtained from a surface-based, fully polarimetric Ka- and Ku-band radar at incidence angles between 0° (nadir) and 50°. Two wind events in November 2019 during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition are evaluated. During both events, changes in Ka- and Ku-band radar waveforms and backscatter coefficients at nadir are observed, coincident with surface topography changes measured by a terrestrial laser scanner. At both frequencies, redistribution caused snow densification at the surface and the uppermost layers, increasing the scattering at the air–snow interface at nadir and its prevalence as the dominant radar scattering surface. The waveform data also detected the presence of previous air–snow interfaces, buried beneath newly deposited snow. The additional scattering from previous air–snow interfaces could therefore affect the range retrieved from Ka- and Ku-band satellite altimeters. With increasing incidence angles, the relative scattering contribution of the air–snow interface decreases, and the snow–sea ice interface scattering increases. Relative to pre-wind event conditions, azimuthally averaged backscatter at nadir during the wind events increases by up to 8 dB (Ka-band) and 5 dB (Ku-band). Results show substantial backscatter variability within the scan area at all incidence angles and polarizations, in response to increasing wind speed and changes in wind direction. Our results show that snow redistribution and wind compaction need to be accounted for to interpret airborne and satellite radar measurements of snow-covered sea ice.

54 ENVIRONMENTAL SCIENCES↗

Multi-Scale Integrated Monitoring System for Enhancing Methane Emission Detection, Quantification & Prediction

This report details the progress and findings of a comprehensive study on reviewing existing solutions, identifying technology gaps, and formulating an “all-in-one” integrated strategy for developing the next-generation multiscale methane monitoring and modeling platform, conducted under grant number DE-FE0032292. Co-led by Dr. David Ebert, Dr. Binbin Weng, and Dr. Chenghao Wang at the University of Oklahoma, the project’s goal was to develop an integrated approach for building this engineering platform to detect, quantify, and mitigate methane emissions across various temporal scale, spatial scales, and sectors. The planning grant study began with an extensive review of various methane sensing and monitoring technologies and systems, surveying over 100 technology providers globally. This review revealed the prevalence of optical methods over chemical methods in commercially available sensors, with Non-Dispersive Infrared (NDIR), Tunable Diode Laser Absorption Spectroscopy (TDLAS), and Optical Gas Imaging (OGI) cameras being the most prevalent options. A trend towards more advanced optical techniques was observed, driven by increased regulatory focus and technological advancements. The technical evaluation of these sensing technologies provided crucial insights into their capabilities and limitations. The study examined emerging technologies such as Differential Absorption LiDAR (DIAL), which show promise for high-precision and long-range detection. The team then investigated the features and application bandwidth of various sensing platforms, including handheld, fixed/stationary, mobile, aerials, and spaceborne monitors. Pilot field studies were conducted to assess the capabilities of solutions for different emission scenarios. Field work with sensor deployments was conducted at three distinct site types: an oil & gas industry site, a cattle ranching operation, and a waste processing facility. The team also conducted a thorough review of methane flux inverse modeling approaches, focused on physically based methods. These approaches were categorized into simple, intermediate, and advanced methods. A realtime WRF-GHG (Weather Research and Forecasting-Greenhouse Gas) modeling system was developed and applied, incorporating multiple data sources to guide field experiments and inform methane plume detection. The project identified and analyzed numerous categories of methane data sources, including satellite measurements, ground-based sensors, and inventory databases. Key platforms examined include EDGAR, EPA GHGI, NASA TROPOMI, Carbon Mapper, and Climate TRACE, among others. The team proposed an architecture for a comprehensive methane monitoring platform. This system incorporates multi-source data acquisition, advanced data processing and assimilation, interactive visualization tools, and analytical capabilities for emissions forecasting and scenario analysis. The proposed platform aims to provide a user-friendly interface catering to various stakeholders, from researchers to policymakers. The architecture includes sophisticated data ingestion methods, a centralized data warehouse, and advanced analytical tools for data fusion and interpretation. To ensure the relevance and effectiveness of the proposed system, a comprehensive survey was conducted to gather stakeholder input on system requirements. Key findings include a strong need for integrating various data types and formats, a preference for real-time data updates and advanced visualization tools, and a demand for user-friendly interfaces catering to different expertise levels.

03 NATURAL GAS↗

2022 LaserNetUS Users' Meeting

Organized and funded in 2018 through the US Department of Energy, Office of Fusion Energy Sciences (FES), LaserNetUS was created to provide vastly improved access to unique lasers for researchers. LaserNetUS is a network of ten high-power laser facilities, both academic and national laboratories, across the United States and Canada. These labs operate many of the premier mid- to large-scale high-intensity laser facilities in the US and Canada that are designed to be used in pioneering experimental studies in high energy density plasma and high field optical science. The network’s principal goal is to provide access to these state-of-the-art laser facilities to a broad range of researchers in the US and abroad. In its over four years of operation, LaserNetUS has awarded beamtime for over 60 user experiments to researchers from 25 different institutions. Over 400 user scientists, many of whom are students and post-docs, have participated in experiments at LaserNetUS facilities so far. The network now has over 1250 members. The LaserNetUS institutions are Colorado State University, Lawrence Berkeley National Lab, Lawrence Livermore National Lab, SLAC National Lab, The Ohio State University, University of Michigan, University of Nebraska-Lincoln, Institut National de la Recherche Scientifique, University of Rochester, and University of Texas at Austin. LaserNetUS hosted its first in-person Annual Users’ Meeting at Colorado State University in Fort Collins, CO, Aug 16-18, 2022. The meeting had 158 attendees, including 39 sponsored students and post-docs whose attendance and travel to the meeting were covered by DOE funds. Attendees included the 2018 Nobel Laureate in Physics, Donna Strickland. The program consisted of 5 plenary talks and several invited and contributed talks, a user community forum, a poster session, and built-in time for networking. The event focused on students and early career professionals. The poster session was held in combination with a reception to facilitate discussions and maximize interactions between the participants. The 39 sponsored students each presented a poster at the poster session, giving them valuable practice in sharing their research with others in the field. Many students and postdocs also gave talks during the main programming. Lunch and coffee breaks were provided for attendees for the duration of the conference on CSU’s campus. This allowed for networking among all participants. The building used to host the conference also had plenty of seating outside the auditorium, which was conducive to smaller one-on-one meetings and discussions between participants. There was also a lab tour of CSU’s Advanced Beam Laboratory. The day before and after the conference also included satellite meetings for the lab PIs and the Scientific Advisory Board. DOE support was used for rental of the auditorium and supporting rooms, student participation, 50% of the food costs, and transportation to the Advanced Beam Lab.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗