SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stress corrosion cracking behavior in titanium, molybdenum, and aluminum alloys, and electrochemical kinetic studies
A series of constant displacement and constant extension rate stress corrosion cracking (SCC) tests was performed on an alpha-beta brass alloy in 1 N Na2SO4 solutions. The chosen mechanical and electrochemical conditions resulted in predominantly transgranular, cleavage-like failure at high (about 8 to 50 microns/s) average crack propagation rates. Crack arrest markings were observed on selected transgranular facets, which almost exclusively bordered regions of ductile overload failure. It is proposed that the observed crack velocities and the specific nature of the arrest mark appearance are most consistent with a cracking mechanism involving adsorption or some other interaction with a damaging environmental species.
Stress corrosion cracking of titanium alloys and aluminum alloys
Development of high strength, corrosion resistant, aluminum alloys is important to a number of industries, including automotive, aerospace, power, etc. Understanding how processing methods such as casting, chemistry, additives and recycle content affect an alloy’s microstructure and performance in real world environments is crucial to their implementation. One major concern is how the repeated exposure to saline solutions can be detrimental to the structural integrity of aluminum alloy components. This study was undertaken as a collaboration between Eck Industries and PNNL to investigate the stress corrosion cracking (SCC) and corrosion behavior of aluminum alloys. This work examines the SCC response of three different materials set. First is cast A206 Al alloy produced by three different casting techniques (i.e., permanent mold, and sand casting with and without chill) and with or without nano forming additives as potential grain refiners. The second materials set comprises Al alloy tubes extruded by PNNL’s ShAPE process and produced using raw material with three different ratios of twitch and pre-consumer Al 6061 scrap. Finally, the third materials set comprises two Al-Si-Mg-Fe alloys with controlled Si% and Fe% to mimic recycle grade Al alloys. The corrosion behavior of these materials was characterized using SCC testing and scanning electrochemical cell microscopy (SECCM) technique; mechanical behavior was characterized using tensile testing, and microstructure was characterized using optical and electron microscopy techniques. Of the A206 Al alloys, the samples with nano forming additives performed poorly compared to those without. The best SCC performance (i.e. least degradation in mechanical properties) was demonstrated by A206 alloy sand cast with chill while the permanent mold sample showed the worst SCC performance. The SECCM was performed on A206 alloy sand cast with chill to understand the effect of microstructure and determine the location-dependent corrosion properties on grain boundaries (GB) and inside grains (IG) on the sample. The corrosion potential and current measured on GB and IG at various points on the sample established that the GB locations are more cathodic and corrosive than the IG locations. Further work needs to be conducted to investigate the mechanisms behind the observed dependence of SCC on casting technique and nano forming additives. Among the ShAPE extruded tubes, SECCM data suggests the decreasing order of tendency to corrode as follows: 100% twitch > 75% twitch > 50% twitch. Finally, both variants of the Al-Si-Mg-Fe alloys showed a large volume fraction of Fe- and Si-containing intermetallics and additional work is needed to discern differences in their respective corrosion responses. In summary, correlating local electrochemical behavior (e.g. via SECCM) with micro/nanostructure, in conjunction with bulk mechanical behavior, can help identify the right fabrication method and alloy chemistry to minimize SCC issues in Al alloys.
Stress corrosion cracking (SCC) is an important failure degradation mechanism for storage of spent nuclear fuel. Since 2014, Sandia National Laboratories has been developing a probabilistic methodology for predicting SCC. The model is intended to provide qualitative assessment of data needs, model sensitivities, and future model development. In fiscal year 2021, improvement of the SCC model focused on the salt deposition, maximum pit size, and crack growth rate models.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site CA-SCC Scotty Creek Landscape. This is the FLUXNET version of the carbon flux data for the site CA-SCC Scotty Creek Landscape produced by applying the standard ONEFlux (1F) software. Site Description - The Scotty Creek flux tower is located in an organic-rich boreal forest-wetland landscape about 50 km south of Fort Simpson in the Taiga Plains of the Mackenzie watershed. The tower was installed in 2013 and operates an open-path EC system year-round running on solar power only. Flux footprints contain about 50 % forested peat plateaus and 50 % wetlands (i.e., collapse-scar bogs). The forests are underlain by permafrost, while the treeless wetlands are permafrost-free. The tower itself is located on a forested peat plateau. Black spruce tree density on plateaus is sparse and the mean canopy height is ca. 5 m.
This progress report describes work performed during FY22 at Sandia National Laboratories (SNL) to assess the corrosion performance of cold spray coatings to enable optimization of cold spray for the purposes of mitigation and/or repair of potentially susceptible regions, corrosion, or stress corrosion cracking (SCC) in austenitic stainless steel for spent nuclear fuel (SNF) storage. Of particular concern is SCC, by which a through-wall crack could potentially form in a canister outer wall over time intervals that may be shorter than possible dry storage times. In FY21, initial corrosion explorations of cold spray coating were evaluated and in FY22, an expanded set of cold spray coatings with in-depth analysis of post-exposure accelerated testing was explored. Additionally, relevant atmospheric exposure testing was carried out and initial results are presented herein. The corrosion attack from the accelerated testing and more realistic atmospheric exposures environments were compared to identify potentially deleterious factors for corrosion as well as help to understand the applicability of accelerated testing for cold spray optimization. This initial analysis will help to enable optimization of the corrosion resistance cold spray, one of the more promising coating and repair techniques, for potential application in an SNF environment. Learnings from both are summarized, and implications and future work are presented in this report.
ScC is Molybdenum Carbide MAX Phase-like structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional. Sc3+ is bonded to six equivalent C3- atoms to form a mixture of face, edge, and corner-sharing ScC6 octahedra. The corner-sharing octahedral tilt angles are 46°. All Sc–C bond lengths are 2.38 Å. C3- is bonded to six equivalent Sc3+ atoms to form a mixture of distorted edge and corner-sharing CSc6 pentagonal pyramids.
ScC crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional. Sc3+ is bonded to five equivalent C3- atoms to form a mixture of edge and corner-sharing ScC5 trigonal bipyramids. All Sc–C bond lengths are 2.29 Å. C3- is bonded to five equivalent Sc3+ atoms to form a mixture of edge and corner-sharing CSc5 trigonal bipyramids.
ScC is Tetraauricupride structured and crystallizes in the cubic Pm-3m space group. The structure is three-dimensional. Sc3+ is bonded in a body-centered cubic geometry to eight equivalent C3- atoms. All Sc–C bond lengths are 2.49 Å. C3- is bonded in a body-centered cubic geometry to eight equivalent Sc3+ atoms.
ScC is Zincblende, Sphalerite structured and crystallizes in the cubic F-43m space group. The structure is three-dimensional. Sc3+ is bonded to four equivalent C3- atoms to form corner-sharing ScC4 tetrahedra. All Sc–C bond lengths are 2.21 Å. C3- is bonded to four equivalent Sc3+ atoms to form corner-sharing CSc4 tetrahedra.
The SCC software calculates the step response characteristics based on the data collected from the plant. The tools available to characterize the step response needs a plant model. Our tool calculates the characteristics based on the data captured from the plant. This prevents the user from building a plant model and directly calculates the response.
This project will develop approaches to overcome the barriers to simultaneous high-strength and high resistance to stress corrosion cracking (SCC) in Al casting alloys. Thus, success in this project will enable fabrication of light-weight components that are otherwise made of either heavier cast iron, or lower-strength Al alloys which need to be oversized (and hence, are heavier) to compensate for lower strength. This project will leverage the availability of advanced analytical instruments and scientific expertise available only through the LightMAT Consortium. If successful, this project has the potential to enable light-weighting of multiple components in light-duty cars and trucks across all makes and models.
Extended SPL assembly language for SCC 4700 computer
The susceptibility of Ti-6Al-4V foil to stress corrosion cracking (SCC) by methanol can be decreased by treatment of the foil with 2,4-pentanedione prior to its immersion in the corroding media. It is assumed that such treatments remove from the protective film formed on the foil by exposure to the atmosphere, certain metal ions whose oxides are more readily penetrated by the ions, Na + and Cl- or Fe(3+) and Cl-, present in the corroding media.
Computation of optical properties using conventional time-dependent density functional theory (TD-DFT) is time-consuming and memory-intensive. In this study, we investigate the accuracy and efficiency of the density functional tight binding (DFTB) framework with newly optimized Slater–Koster (SK) parameters for modeling the structural, electronic properties, and absorption spectra of silver and gold nanoclusters and their alloys. Our investigation of the ground state (GS) properties demonstrates that the newly developed GS-SK parameters enable DFTB to closely approximate DFT-calculated bond lengths for octahedron, tetrahedron, icosahedra, and truncated octahedron with sizes Ag n /Au n (n = 19, 20, 38, 55), nanoclusters and Ag 20 /Au 20 nanoalloys, with a maximum deviation of approximately 0.15 Å. Formation energy results indicate that the GS-SK parameters can closely estimate changes in formation energies with alloy composition, and the comparison of electronic structures for Ag 20 , Au 20 , and AgAu alloy nanoclusters using the DFTB approximation reveals good agreement in the projected density of states (DOS) profiles and energy levels. A second set of SK parameters, ES-SK, has been developed to describe excited state (ES) properties, including the absorption spectra of silver octahedron Ag 19 , tetrahedral Ag n (n = 20, 56, 84), truncated octahedron Ag 38 , and icosahedra Ag 55 closed-shell clusters and their gold and alloy counterparts over a broad range of alloy compositions. This parametrization uses TD-DFTB calculations and fine-tunes the d and p eigenvalues by comparing them to reference absorption spectra from first-principles TD-DFT. This enables the generation of absorption spectra that closely match the reference spectra when plasmon excitation is dominant, as demonstrated by studying the plasmonic properties of icosahedral Ag n and Au n (n = 309 and 561) nanoparticles. This includes the rapid loss in plasmon quality when Au partially replaces Ag in alloy clusters. Furthermore, these results provide a foundation for addressing computational bottlenecks in plasmonics and with new prospects for applications in the quantum plasmonics for bimetallic alloys.