Search NASA⌕ Search

SEARCH · Search NASA

Results for “Schemes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluating the performance of WRF urban schemes and PBL schemes over Dallas-Fort Worth during a dry summer and a wet summer

This study evaluated the Weather Research and Forecasting (WRF) model sensitivity to different planetary boundary layer (PBL) schemes (the YSU and MYJ schemes) and urban schemes including the bulk scheme (BULK), single-layer urban canopy model (UCM), multi-layer building environment parameterization (BEP) model, and multi-layer building energy model (BEM). Daily reinitialization simulations were conducted over Dallas-Fort Worth during a dry summer month (July 2011) and a wet summer month (July 2015) with weaker (stronger) daytime (nocturnal) UHI in 2011 than 2015. All urban schemes overestimated the urban daytime 2m temperature in both summers, but BEP and BEM still reproduced the daytime urban cool island in dry summer. All urban schemes reproduced the nocturnal urban heat island, with BEP producing the weakest one due to its unrealistic urban cooling. BULK and UCM overestimated the urban canopy wind speed, while BEP and BEM underestimated it. The urban schemes showed prominent impact on daytime PBL profiles. UCM+MYJ showed a superior performance than other configurations. The relatively large (small) aspect ratio between building height and road width in UCM (BEM) was responsible for the overprediction (underprediction) of urban canopy temperature. The relatively low (high) building height in UCM (BEM) was responsible for the overprediction (underprediction) of urban canopy wind speed. Improving urban schemes and providing realistic urban parameters were critical for improving urban canopy simulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Conservative numerical schemes with optimal dispersive wave relations: Part I. Derivation and analysis

An energy-conserving and an energy-and-enstrophy conserving numerical schemes are derived by approximating the Hamiltonian formulation of the inviscid shallow water flows based on the vorticity-divergence variables. These schemes also conserve the first-order moments such as mass and vorticity, as usual. The conservative properties of the schemes stem from the skew-symmetry and singularities of the Poisson brackets, which are carefully retained in the discrete approximations. Here, the schemes operate on unstructured orthogonal dual meshes, over bounded or unbounded domains, and they are also shown to possess the same optimal dispersive wave relations as those of the Z-grid scheme, which is a consequence of the use of the vorticity and divergence variables.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Precision spectroscopy and laser-cooling scheme of a radium-containing molecule

Molecules containing heavy radioactive nuclei are predicted to be extremely sensitive to violations of the fundamental symmetries of nature. The nuclear octupole deformation of certain radium isotopes massively boosts the sensitivity of radium monofluoride molecules to symmetry-violating nuclear properties. Moreover, these molecules are predicted to be laser coolable. In this article, we report measurements of the rovibronic structure of radium monofluoride molecules, which allow the determination of their laser cooling scheme. We demonstrate an improvement in resolution of more than two orders of magnitude compared to the state of the art. Our developments allowed measurements of minuscule amounts of hot molecules, with only a few hundred per second produced in a particular rotational state. The combined precision and sensitivity achieved in this work offer opportunities for studies of radioactive molecules of interest in fundamental physics, chemistry and astrophysics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Tendencies of Soil Microbial NO Emissions During HI‐SCALE as Predicted by a Nitrification/Denitrification Scheme

Many atmospheric chemical processes, including the formation of secondary organic aerosol (SOA), are strongly modulated by the reactions of NO and NO 2 (NO x ). Though NO x is controlled by anthropogenic emissions near urban areas, in rural areas soil microbes can be a significant contribution to NO emission globally. The relative rates of emissions of different nitrogen-containing species (e.g., NO, N 2 O, HONO, and N 2 ) are strong functions of soil properties such as temperature, moisture content, pH, and soil carbon and nitrogen pools. However, typical large-scale biogeochemical models either express these emissions simplistically, or not at all. Here we investigate the potential impact of soil NO emissions on atmospheric chemistry and SOA formation over regional and monthly time scales, specifically the 2016 spring and summer Intensive Observational Periods (IOPs) of the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystems (HI-SCALE) field campaign. We implement the soil NO nitrification/denitrification parameterization of Rasool et al. (2019) into the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), supplemented by a 1-km soil moisture analysis. We then simulate both IOPs over the U.S. Great Plains, evaluating against ground stations and flight data. We show that soil NO emissions can account for a large fraction of total NO x and locally increase O 3 concentrations by up to 25%, while alleviating negative biases of gases and aerosols toward observations. Soil moisture and temperature changes between IOP1 and IOP2 lead to overall differences in emissions, but with large regional variability due to heterogeneous surface characteristics.

Atmoshpheric Chemistry↗
DOE OSTI2026

Fermilab PIP-II machine protection system digitized data noise elimination scheme and its FPGA implementation

In Fermilab's PIP-II machine protection system, beam loss signals from various detectors are digitized at 125 MS/s. Noise from both high-frequency sources and low-frequency 60 Hz AC power equipment can contaminate the data. To suppress noise across these ranges—especially 60 Hz and its harmonics, which overlap with beam loss signal frequencies—advanced digital processing beyond standard filtering is required. Several real-time functional blocks were simulated and tested on an FPGA: (1) a dual time-constant discharging integrator filter, (2) a de-ripple baseline extraction and storage block, and (3) a fast-recovery discharging integrator. The nonlinear IIR integrator filter removes high-frequency noise and feeds into the baseline extractor. Upon detecting abrupt beam loss, it switches to a longer time constant to prevent baseline distortion. The de-ripple block calculates a valid baseline by averaging over multiple 60 Hz periods, storing results in a 4096-word FPGA RAM. This baseline is subtracted from raw data before integration by the fast-recovery block, which resets quickly after use. All blocks achieved expected performance and were successfully implemented on a low-cost FPGA.

Wu, Jinyuan [Fermilab]↗
DOE OSTI2022

Development of a triple-moment ice-phase cloud microphysics scheme and its application to the Single Column Atmosphere Model

Parameterization of cloud microphysics is critical for accurate simulation of weather and climate, in which the characteristics of cloud particle spectrum inevitably further affect climate simulation by changing the cloud evolution and cloud radiation effects. The popular currently used double-moment cloud microphysics schemes in numerical models can predict the intercept (N 0 ) and slope (λ) parameters of cloud particle spectrum but cannot predict the spectral shape parameter (μ), which hinders accurate description of cloud physical processes in climate models. Therefore, in the present study, we built upon the ideas of previously developed triple-moment cloud microphysics scheme, considered radar reflectivity factor as the third predictor in addition to number and mass concentration, and introduced its related prediction equation to the Single Column Atmosphere Model Version 5.3 (SCAM5.3). Moreover, the relevant microphysical process formulas in the model were revised, and a triple-moment ice-cloud microphysics scheme was constructed to predict the μ of ice particle spectrum. Based on this model, a 29-day case of the Atmospheric Radiation Measurement Program in the summer of 1997 (ARM97) was simulated, and the differences in cloud fraction and radiation simulations between the double- and triple-moment schemes were analysed. The μ of ice particle spectrum predicted by the triple-moment scheme mainly ranged from 0 to 4; the peak value was around 2, and at least 85% of the μ values were greater than the default 0. Therefore, the μ=0 setting in the double-moment scheme is unreasonable. Moreover, the developed triple-moment ice-cloud microphysics scheme yielded a narrower ice particle spectrum, which was closer to the observation results of previous studies, than the double-moment cloud microphysics scheme (e.g., height=233 hPa). Furthermore, compared with the double-moment scheme, the triple-moment scheme achieved closer simulations of the cloud fraction observations, particularly for ice clouds in the upper levels. Considering the close association between cloud fraction and radiation, the error with the triple-moment scheme was smaller than that with the double-moment scheme regardless of the shortwave (surface downward shortwave radiation, net downward shortwave radiation at the top of the atmosphere, and net shortwave radiation at the surface) or longwave (surface downward longwave radiation and net longwave radiation at the surface) flux density. Finally, the improvement mechanism of the triple-moment scheme on cloud fraction and radiation simulations was explored. The major reason is that the triple-moment scheme weakens the autoconversion of ice crystal to form snow and enhances the growth process of ice crystal deposition, thereby increasing the mass concentration of ice crystals and ice cloud fraction. Overall, the developed triple-moment ice-cloud microphysics scheme can help improve the simulation ability of models for cloud-climate feedback and other processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Lack of robustness and accuracy of many numerical schemes for phase-field simulations

In this paper, we study the stability, accuracy and convergence behavior of various numerical schemes for phase-field modeling through a simple ODE model. Both theoretical analysis and numerical experiments are carried out on this ODE model to demonstrate the limitation of most numerical schemes that have been used in practice. One main conclusion is that the first-order fully implicit scheme is the only robust algorithm for phase-field simulations while all other schemes (that have been analyzed) may have convergence issue if the time step size is not exceedingly small. More specifically, by rigorous analysis in most cases, we have the following conclusions: (i) The first-order fully implicit scheme converges to the correct steady state solution for all time step sizes. In the case of multiple solutions, one of the solution branches always converges to the correct steady state solution. (ii) The first-order convex splitting scheme, which is equivalent to the first-order fully implicit scheme with a different time scaling, always converges to the correct steady state solution but may seriously lack numerical accuracy for transient solutions. (iii) For the second-order fully implicit and convex splitting schemes, for any time step size $δt > 0$, there exists an initial condition $u_0$ , with $|u_0| > 1$, such that the numerical solution converges to the wrong steady state solution. (iv) For $|u_0|$ ≤ 1, all second-order schemes studied in this paper converge to the correct steady state solution although severe numerical oscillations occur for most of them if the time step size is not sufficiently small. (v) An unconditionally energy-stable scheme (such as the modified Crank–Nicolson scheme) is not necessarily better than a conditionally energy-stable scheme (such as the Crank–Nicolson scheme). Finally, most, if not all, of the above conclusions are expected to be true for more general Allen–Cahn and other phase-field models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Improving the particle dry deposition scheme in the CMAQ photochemical modeling system

Dry deposition of atmospheric aerosols in large-scale models is a critical, but highly uncertain, sink process with a strong dependence on particle size, meteorological conditions, and land surface properties. This study investigates the particle dry deposition scheme implemented in the standard Community Multiscale Air Quality (CMAQ) model v5.2.1, characterizes its underlying parameterized components with comparison to a similar scheme in a contemporary regional-scale model, and proposes two updated schemes that are then evaluated with available ambient particle deposition velocity (V d ) measurements. Both updated schemes reduce the surprisingly strong dependence of deposition velocity on the aerosol mode width, with one scheme further introducing a dependence on vegetation coverage that is broadly consistent with variability in observations between vegetated and non-vegetated surfaces. Compared to the base scheme, the updated scheme with vegetation dependence increases V d for submicron particles and decreases it for larger particles by an average of 37% and –66%, respectively. This scheme performs statistically better than the base scheme, reducing fractional biases by 56%–97% for vegetated land-use types and has roughly equivalent performance over water. The base and updated schemes are tested with three annual CMAQ (v5.2.1) simulations for the year 2011; predicted ambient aerosol concentrations are evaluated with routine monitoring network observations and predicted dry deposition fluxes are evaluated with data from the Clean Air Status and Trends Network (CASTNET). The updated scheme with vegetation dependence reduces negative fractional biases for PM 10 by 41% and positive fractional biases for PM 2.5 organic carbon by 15%. This scheme has been incorporated into the most recent publicly accessible versions of CMAQ (v5.3 and beyond) to replace the scheme used in previous versions of CMAQ (v4.5 through v5.2.1).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

An evaluation of global organic aerosol schemes using airborne observations

Chemical transport models have historically struggled to accurately simulate the magnitude and variability of observed organic aerosol (OA), with previous studies demonstrating that models significantly underestimate observed concentrations in the troposphere. In this study, we explore two different model OA schemes within the standard GEOS-Chem chemical transport model and evaluate the simulations against a suite of 15 globally distributed airborne campaigns from 2008 to 2017, primarily in the spring and summer seasons. These include the ATom, KORUS-AQ, GoAmazon,FRAPPE, SEAC4RS, SENEX, DC3, CalNex, OP3, EUCAARI, ARCTAS and ARCPAC campaigns and provide broad coverage over a diverse set of atmospheric composition regimes – anthropogenic, biogenic, pyrogenic and remote. The schemes include significant differences in their treatment of the primary and secondary components of OA – a “simple scheme” that models primary OA (POA) as non-volatile and takes a fixed-yield approach to secondary OA (SOA) formation and a “complex scheme” that simulates POA as semi-volatile and uses a more sophisticated volatility basis set approach for non-isoprene SOA, with an explicit aqueous uptake mechanism to model isoprene SOA. Despite these substantial differences, both the simple and complex schemes perform comparably across the aggregate dataset in their ability to capture the observed variability (with an R2 of 0.41 and 0.44, respectively). The simple scheme displays greater skill in minimizing the overall model bias (with a normalized mean bias of 0.04 compared to 0.30 for the complex scheme). Across both schemes, the model skill in reproducing observed OA is superior to previous model evaluations and approaches the fidelity of the sulfate simulation within the GEOS-Chem model. However,there are significant differences in model performance across different chemical source regimes, classified here into seven categories.Higher-resolution nested regional simulations indicate that model resolution is an important factor in capturing variability in highly localized campaigns, while also demonstrating the importance of well-constrained emissions inventories and local meteorology, particularly over Asia. Our analysis suggests that a semi-volatile treatment of POA is superior to anon-volatile treatment. It is also likely that the complex scheme parameterization overestimates biogenic SOA at the global scale. While this study identifies factors within the SOA schemes that likely contribute to OA model bias (such as a strong dependency of the bias in the complex scheme on relative humidity and sulfate concentrations), comparisons with the skill of the sulfate aerosol scheme in GEOS-Chem indicate the importance of other drivers of bias, such as emissions, transport and deposition, that are exogenous to the OA chemical scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Two-Energies Turbulence Scheme Coupled to the Assumed PDF Method

An update of the two-energy turbulence scheme is presented, the 2TE + APDF scheme. The original version of the two-energy scheme is able to successfully model shallow convection without the need of an additional parameterization for non-local fluxes. However, the performance of the two-energy scheme is worse in stratocumulus cases, where it tends to overestimate the erosion of the stable layers. We have identified the causes: the non-local stability parameter does not consider local stratification, the scheme lacks an internal parameter that could distinguish between a shallow convection regime and a stratocumulus regime, and it uses an inflexible turbulence length scale formulation. To alleviate this problem, we propose several modifications: an update of the stability parameter, a modified computation of the turbulence length scale, and the introduction of the entropy potential temperature to distinguish between a shallow convection and a stratocumulus regime. In addition, the two-energy scheme is coupled to a simplified assumed probability density function method in order to achieve a more universal representation of the cloudy regimes. The updated turbulence scheme is evaluated for several idealized cases and one selected real case in the ICOsahedral Nonhydrostatic (ICON) modeling framework. The results show that the updated scheme corrects the overmixing problem in the stratocumulus cases. The performance of the updated scheme is comparable to the operational setup, and can be thus used instead of the operational turbulence and shallow convection scheme in ICON. Additionally, the updated scheme improves the coupling with dynamics, which is beneficial for the modeling of coherent flow structures in the atmospheric boundary layer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Limitations of Separate Cloud and Rain Categories in Parameterizing Collision-Coalescence for Bulk Microphysics Schemes

Warm rain collision-coalescence has been persistently difficult to parameterize in bulk microphysics schemes. We use a flexible bulk microphysics scheme with bin scheme process parameterizations, called AMP, to investigate reasons for the difficulty. AMP is configured in a variety of ways to mimic bulk schemes and is compared to simulations with the bin scheme upon which AMP is built. We find that an important limitation in traditional bulk schemes is the use of separate cloud and rain categories. When the drop size distribution is instead represented by a continuous distribution, the simulation of cloud-to-rain conversion is substantially improved. We also find large sensitivity to the threshold size to distinguish cloud and rain in traditional schemes; substantial improvement is found by decreasing the threshold from 40 to 25 μm. Neither the use of an assumed functional form for the size distribution nor the choice of predicted distribution moments has a large impact on the ability of AMP to simulate rain production. When predicting four total moments of the liquid drop size distribution, either with a traditional two-category, two-moment scheme with a reduced size threshold, or a four-moment single-category scheme, errors in the evolution of mass and the cloud size distribution are similar, but the single-category scheme has a substantially better representation of the rain size distribution. Optimal moment combinations for the single-category approach are investigated and appear to be linked more to the information content they provide for constraining the size distributions than to their correlation with collision-coalescence rates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Comparison of excess free energy at an interface according to the applied interpolation scheme for elasticity: A phase-field method

Phase-field modeling is an effective simulation technique for modeling microstructure evolution of elastically anisotropic systems. To introduce the elastic energy contribution in a phase field model, an interpolation scheme is used to define the mechanical properties within the phases and across the continuous interface. Several existing interpolation schemes introduce a potential excess elastic energy at the interface, which undesirable effect on microstructure evolution needs to be evaluated. In this study, we focused on three interpolation schemes including Khachaturyan’ scheme (KHS), Voigt–Taylor’s scheme (VTS), and Steinbach–Apel’s scheme (SAS). Comparisons of these schemes’ performances were performed in three configuration types using the MOOSE (Multiphysics Object-Oriented Simulation Environment) framework: bi-crystal, isotropic particle-matrix and anisotropic particle-matrix. The contribution of excess elastic energy on the interface energy as a function of interface width and the computational time to steady-state were evaluated in these three configurations. SAS introduces the lowest excess elastic energy contribution and the VTS has the biggest contribution amongst the considered schemes. Moreover, when modeling precipitation in an anisotropic elastic material, the SAS approach seems to predict more physical convex shapes during growth, making it preferable to KHS and VTS. Finally, as currently implemented, SAS requires the largest computational time and KHS requires the smallest time to reach steady-state amongst the considered schemes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Low-dissipation centred schemes for hyperbolic equations in conservative and non-conservative form

We propose a one-parameter family of low-dissipation centred numerical schemes for solving hyperbolic equations in conservative or non-conservative form, using finite volume or discontinuous Galerkin finite element methods. The new schemes spring out from the multi-dimensional FORCE method and are determined by a single parameter α ≥ 1. Given an increasing sequence of real numbers 1 ≤ α 1 < α 2 < . . . < α K , there corresponds a sequence of numerical schemes with stability restriction associated to a decreasing sequence of Courant numbers 1 > c 1 > c 2 > . . . > c K > 0 and a decreasing sequence of corresponding numerical viscosity functions d 1 > d 2 > . . . > d K . For a given Courant number c k ≤ 1 there is a real number α k > 0 and a corresponding stable scheme with minimal numerical viscosity d k . The proposed schemes suit very well the family of high-order discontinuous Galerkin finite element methods and the recently proposed class of ADER-TR schemes, whose orders of accuracy define decreasing sequences of Courant numbers, as the order of accuracy increases. The centred methods of this paper are stable in 2D and 3D in the frame of simultaneous updating formulae, unlike other centred methods, such as 1D FORCE, which are not. Furthermore, the schemes are highly accurate for slowly-moving waves, which is precisely the kind of waves that traditional centred methods smear disastrously. Additional features of the proposed schemes include ease of implementation and applicability to any hyperbolic system either in conservative or non-conservative form. Here, the proposed schemes are analysed and computationally assessed through a suite of test problems for a linear model system, for the Euler equations in one and two space dimensions, and for the Baer-Nunziato equations for compressible two-phase flow.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

A Computationally Efficient Linear Semi-Lagrangian Scheme for the Advection of Microphysical Variables in Cloud-Resolving Models

An efficient semi-Lagrangian (SL) numerical scheme for the advection of positive-definite microphysical variables in cloud-resolving models is proposed. The scheme is a linear combination of SL schemes of the first and second order. The proposed scheme is compared with two high-order, monotonic, nonlinear Eulerian schemes, in two 2D tests. In the first test, advection of a positive scalar field with large gradients is performed within complicated idealized steering flows. In the second test, a hail storm is simulated using the 2D Hebrew University Cloud Model, describing the interactions between 15 size distributions of different microphysical quantities (each distribution is described by 43 mass bins). The proposed scheme is computationally efficient, has a low numerical diffusion and a high level of mass conservation accuracy, and preserves the sum of multiple advected variables as well as the linear relationships between the advected scalar variables. Although the proposed SL scheme is not exactly positive definite, the negative values and their number, which may appear only in the case of very strong gradients, are negligible. The scheme produces results similar to those of nonlinear Eulerian advection schemes while reducing computation time by approximately a factor of 10.

54 ENVIRONMENTAL SCIENCES↗