SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Glass formation region of chalcogenide semiconductor arsenic triselenide-antimony triselenide system and vitreous-crystalline transformation, investigating electrical and optical properties
A tunable level, phase change material-based metasurface near IR optical filter on a transmissive doped silicon-on-insulator platform is demonstrated. This type of filter is non-volatile, non-mechanical, with switching being enabled by Joule heating via current pulses.
Sustained conversion of low energy visible or near i.r. light (>1.25 eV) to electrical energy has been obtained using wet photoelectrochemical cells where there are no net chemical changes in the system. Stabilization of n-type semi-conductor anodes of CdS, CdSe, CdTe, GaP, GaAs and InP to photoanodic dissolution is achieved by employing selected alkaline solutions of Na.sub.2 S, Na.sub.2 S/S, Na.sub.2 Se, Na.sub.2 Se/Se, Na.sub.2 Te and Na.sub.2 Te/Te as the electrolyte. The oxidation of (poly) sulfide, (poly)selenide or (poly)telluride species occurs at the irradiated anode, and reduction of polysulfide, polyselenide or polytelluride species occurs at the dark Pt cathode of the photoelectrochemical cell. Optical to electrical energy conversion efficiencies approaching 15% at selected frequencies have been observed in some cells. The wavelength for the onset of photocurrent corresponds to the band gap of the particular anode material used in the cell.
Examined are the yearly variations and ratios of sunspot number, the number of sunspot groups, and the total corrected sunspot area for the interval 1875-2013. While yearly sunspot number independently correlates strongly (r = 0.98) with the yearly number of sunspot groups (y = -2 + 11.99x) and the total corrected sunspot area (y = 5 + 0.059x), the strongest correlation (Ry12 = 0.99) is the one based on the bivariate fit of sunspot number against the combined variations of the number of sunspot groups and sunspot area (y = 1 + 5.88x1 + 0.031x2, where y refers to sunspot number, x1 refers to the number of sunspot groups, and x2 refers to the sunspot area). While all cycle minima based on the bivariate fit are concurrent with the observed minimum in sunspot number, cycle maxima are sometimes found to differ. For sunspot cycles 12, 19, 20, and 23, cycle maximum is inferred to have occurred in 1884, 1958, 1970, and 2002, respectively, rather than in 1883, 1957, 1968, and 2000, based on the observed sunspot number. Also, cycle 19's maximum amplitude based on observed sunspot number seems too high in comparison to that found using the bivariate fit. During the 139-year interval 1875-2013, the difference between the observed and predicted sunspot number based on the bivariate fit is <1 standard error of estimate (se) (<6.4) for 111 years, between 1 and <2 se (6.4 to <12.8) for 28 years, and ≥2 se (≥12.8) for only 4 years, these years being 1957 (16.6), 1978 (-15.8), 1980 (23), and 1982 (-16.3). For sunspot cycle 24, the difference between observed and predicted values has been only -0.7 and 3.2 (≤0.5 se).
Fluctuations in hemodynamic load have been documented to modulate contractile protein turnover and myofibrillar structure in the heart; however, the relative importance of active and passive loading in regulating adult cardiocyte growth remains unresolved. To address this issue at the cellular level, adult feline cardiocytes were cultured either on Silastic membranes or plastic surfaces. Cardiocyte-laden membranes were stretched 10% of their rest length to enhance passive loading, whereas heart cells cultured on plastic or Silastic were field stimulated at 1 Hz to mimic active loading. Turnover of contractile proteins and structural integrity of the contractile-cytoskeletal apparatus were monitored for periods ranging from 4 to 72 h. Active and passive loading elevated contractile protein synthesis nearly equally (approximately 50%) and promoted the attachment of remodeled myofibrils to vinculin-positive focal contacts and/or costameres during the first 24 h of loading. Thereafter, rates of contractile protein synthesis returned to control values in passively stretched heart cells but remained elevated in field-stimulated cultures. The fractional rate of growth was increased significantly (approximately 8%/day) in electrically paced cells, whereas in passively stretched cardiocytes the growth rate rose only modestly (approximately 2%/day). Changes in the rate of myocyte growth appeared more closely correlated with the development of focal contacts and myofibril remodeling than with changes in myofibrillar protein turnover per se. 2,3-Butanedione monoxime, nifedipine, and, to a lesser extent, ryanodine blocked field-stimulated contractile protein synthesis and myofibrillar remodeling but had no impact on protein turnover or myofibril reassembly in passively loaded cardiocytes. The results of these experiments imply that both active and passive loading stimulate contractile protein turnover and myofibril remodeling, but the generation of active tension accelerates cardiocyte growth to a greater extent than passive loading. Furthermore, pharmacological interventions suggest that unique pathways may mediate these cellular events in actively and passively loaded adult cardiocytes.
Photovoltaic arrays have played a key role in power generation in space. The current technology will continue to evolve but is limited in the important mass specific power metric (MSP or power/weight ratio) because it is based on bulk crystal technology. The objective of this research is to continue development of an innovative photovoltaic technology for satellite power sources that could provide up to an order of magnitude saving in both weight and cost, and is inherently radiation-tolerant through use of thin film technology and thin foil substrates such as 5-mil thick stainless steel foil or 1-mil thick Ti. Current single crystal technology for space power can cost more than $300 per watt at the array level and weigh more than 1 kg/sq m equivalent to specific power of approx. 65 W/kg. Thin film material such as CuIn(1-x),Ga(x)S2, (CIGS2), CuIn(1-x), G(x)Se(2-y),S(y), (CIGSS) or amorphous hydrogenated silicon (a-Si:H) may be able to reduce both the cost and mass per unit area by an order of magnitude. Manufacturing costs for solar arrays are an important consideration for total spacecraft budget. For a medium sized 5kW satellite, for example, the array manufacturing cost alone may exceed $2 million. Moving to thin film technology could reduce this expense to less than $500 K. Previous work at FSEC demonstrated the potential of achieving higher efficiencies from CIGSS thin film solar cells on 5-mil thick stainless steel foil as well as initial stages of facility augmentation for depositing thin film solar cells on larger (6"x 4") substrates. This paper presents further progress in processing on metal foil substrates. Also, previous work at DayStar demonstrated the feasibility of flexible-thin-film copper-indium-gallium-diselenide (CIGS) solar cells with a power-to-weight ratio in excess of 1000 W/kg. We will comment on progress on the critical issue of scale-up of the solar cell absorber deposition process. Several important technical issues need to be resolved to realize the benefits of lightweight technologies for solar arrays, such as: monolithic interconnects, lightweight array structures, and new ultra-light support and deployment mechanisms. Once the technology has gained spaceflight certification it should find rapid acceptance in specific satellite markets.
The development of thin film solar cells is aimed at reducing the costs for photovoltaic systems. Use of thin film technology and thin foil substrate such as 5-mil thick stainless steel foil or 1-mil thick Ti would result in considerable costs savings. Another important aspect is manufacturing cost. Current single crystal technology for space power can cost more than $ 300 per watt at the array level and weigh more than 1 kg/sq m equivalent to specific power of approx. 65 W/kg. Thin film material such as CuIn1-xGaxS2 (CIGS2), CuIn(1-x)Ga(x)Se(2-y)S(y) (CIGSS) or amorphous hydrogenated silicon (a-Si:H) may be able to reduce both the cost and mass per unit area by an order of magnitude. Manufacturing costs for solar arrays are an important consideration for total spacecraft budget. For a medium sized 5kW satellite for example, the array manufacturing cost alone may exceed $ 2 million. Moving to thin film technology could reduce this expense to less than $ 500K. Earlier publications have demonstrated the potential of achieving higher efficiencies from CIGSS thin film solar cells on 5-mil thick stainless steel foil as well as initial stages of facility augmentation for depositing thin film solar cells on larger (6 in x 4 in) substrates. This paper presents the developmental study of achieving stress free Mo coating; uniform coatings of Mo back contact and metallic precursors. The paper also presents the development of sol gel process, refurbishment of selenization/sulfurization furnace, chemical bath deposition (CBD) for n-type CdS and scrubber for detoxification of H2S and H2Se gases.
Improved single-source precursor compounds have been invented for use in spray chemical vapor deposition (spray CVD) of chalcopyrite semiconductor absorber layers of thin-film cells. A "single-source precursor compound" is a single molecular compound that contains all the required elements, which when used under the spray CVD conditions, thermally decomposes to form CuIn(x)Ga(1-x)S(y)Se(2-y).
The synthesis and some properties of several arsenopyrite phases based on RuSb(sub 2-2x)Te(sub 2x) and RuSb(sub 2-2x)Se(sub 2x) solid solutions is reported.
We have prepared and measured the electrical resistivity, Seebeck coefficient, and thermal conductivity of the Chevrel material Mo(2)Re(4)Se(8) in the 300-1000K temperature range.
This report is one in a series of reports describing research to develop enhanced approaches to design and evaluation of flight deck interaction. The research was conducted to support the Commercial Aviation Safety Team (CAST) response to incidents and accidents caused by failure of the flight crew to maintain aircraft attitude or energy state awareness. This report partially responds to Safety Enhancement (SE) 210.2 (CAST, 2014) by describing development of operational scenarios for evaluation of flight crew interaction. Evaluations of human performance with an interface rely on asking humans to perform operational tasks in an appropriate operational context. The report includes the major sources of material for developing operational scenarios—which include system state, operational tasks, operational context, and safety events—and a method for developing an appropriate set of operational scenarios for interface evaluation.
The occurrence of a sustained vasodilation and hypotension after acute, dynamic exercise suggests that exercise may alter arterial baroreflex mechanisms. Therefore, we assessed systemic hemodynamics, baroreflex regulation of heart rate, and cardiac vagal tone after 60 min of cycling at 60% peak oxygen consumption in 12 healthy, untrained men and women (ages 21-28 yr). We derived sigmoidal carotid-cardiac baroreflex relations by measurement of R-R interval changes induced by ramped, stepwise, R-wave-triggered changes in external neck pressure from 40 to -65 mmHg. We estimated tonic cardiac vagal control with power spectral analysis of R-R interval variability in the respiratory frequency band (0.2-0.3 Hz) during frequency- and tidal volume-controlled breathing. Both mean arterial pressure and total peripheral resistance were reduced postexercise [pressure: from 86 +/- 2 (mean +/- SE) to 81 +/- 2 mmHg; resistance: from 23 +/- 2 to 16 +/- 1 units; both P < 0.05]. Cardiac output was increased postexercise (from 3.9 +/- 0.3 to 5.5 +/- 0.5 l/min, P < 0.05). Both slope and range of the carotid-cardiac baroreflex relation were increased postexercise (slope: from 4.7 +/- 0.7 to 6.1 +/- 0.9 ms/mmHg; range: from 186 +/- 23 to 238 +/- 30 ms, P < 0.05). Respiratory R-R interval variability (cardiac vagal tone) was not changed at any time after exercise, whereas heart rate and plasma norepinephrine levels were elevated. Thus moderate-intensity, dynamic exercise increases heart rate and cardiac output, reduces peripheral vascular resistance, and augments baroreflex responsiveness. Our data suggest that augmented baroreflex heart rate gain restrains rather than contributes to postexercise hypotension, which appears to be mediated predominately by vasodilation.
This report is part of a series of reports that address flight deck design and evaluation, written as a response to loss of control accidents. In particular, this activity is directed at failures in airplane state awareness in which the pilot loses awareness of the airplane's energy state or attitude and enters an upset condition. In a report by the Commercial Aviation Safety Team, an analysis of accidents and incidents related to loss of airplane state awareness determined that hazard alerting was not effective in producing the appropriate pilot response to a hazard (CAST, 2014). In the current report, we take a detailed look at 28 airplane state awareness accidents and incidents to determine how well the hazard alerting worked. We describe a five-step integrated alerting-to-recovery sequence that prescribes how hazard alerting should lead to effective flight crew actions for managing the hazard. Then, for each hazard in each of the 28 events, we determine if that sequence failed and, if so, how it failed. The results show that there was an alerting failure in every one of the 28 safety events, and that the most frequent failure (20/28) was tied to the flight crew not orienting to (not being aware of) the hazard. The discussion section summarizes findings and identifies alerting issues that are being addressed and issues that are not currently being addressed. We identify a few recent upgrades that have addressed certain alerting failures. Two of these upgrades address alerting design, but one response to the safety events is to upgrade training for approach to stall and stall recovery. We also describe issues that are not being addressed adequately: better alert integration for flight path management types of hazards, airplanes in the fleet that do not meet the current alerting regulations, a lack of innovation for addressing cases of channelized attention, and existing vulnerabilities in managing data validity.
Attention, awareness, and understanding of the flight crew are a critical contributor to safety and the flight deck plays a critical role in supporting these cognitive functions. Changes to the flight deck need to be evaluated for whether the changed device provides adequate support for these functions. This report describes a set of diverse evaluation methods. The report recommends designing the interface-evaluation to span the phases of the device development, from early to late, and it provides methods appropriate at each phase. It describes the various ways in which an interface or interface component can fail to support awareness as potential issues to be assessed in evaluation. It summarizes appropriate methods to evaluate different issues concerning inadequate support for these functions, throughout the phases of development.
This report is part of a series of reports that address flight deck design and evaluation, written as a response to loss of control accidents. In particular, this activity is directed at failures in airplane state awareness in which the pilot loses awareness of the airplane’s energy state or attitude and enters an upset condition. The Commercial Aviation Safety Team (CAST) created a team to analyze a set of incidents and accidents associated with the flight crew’s loss of awareness of aircraft attitude or energy state. The CAST activity focused on a set of 18 loss of control (LOC) accidents and incidents. In those events, the pilot seemed to lose awareness of the state of the airplane, especially related to its energy state or its attitude. To understand the roots of that loss of awareness, we analyzed the events in relation to a set of factors that were present in many of them. We show how these factors contributed to lost awareness. Then, we use that understanding to identify potentially useful changes to the flight deck interface and how those flight deck changes could be evaluated.
This report is part of a series of reports that addresses flight deck design and evaluation, written as a response to loss of control accidents. In particular, this activity is directed at failures in airplane state awareness, in which the pilot loses awareness of the airplane’s energy state or attitude and enters an upset condition. Another report in this series of reports speaks directly to flight deck evaluation methods and metrics for the types of attention and awareness issues that were revealed from the airplane state awareness events. In this report, we describe a wide range of flight deck evaluation issues tied to flight crew performance. The objectives are to establish a framework for thinking about how the flight deck interface should support the performance of the flight crew, and to aid the Federal Aviation Administration (FAA) in identifying relevant human performance issues during the evaluation/certification process. Issues are broken out into sections that cover physical ergonomics, design for usability, data integration and display content, attention and task management, flight crew problem solving, and flight crew teaming. For each issue, we recommend specific ways that the flight deck interface should support the flight crew. For each, we also identify existing 14 CFR Part 25 rules and guidance that are relevant to the issue. This allows the FAA to determine what current regulatory materials can support them in raising the issue with the applicant.
A summary of significant study results that are products of the Phase B conceptual design task are contained. Major elements are addressed. Study results applicable to each major element or area of design are summarized and included where appropriate. Areas addressed include: system engineering and integration; customer accommodations; test and program verification; product assurance; conceptual design; operations and planning; technical and management information system (TMIS); and advanced development.
The Advanced Systems Research Group supports the photovoltaic advanced R&D (PV AR&D) project by providing outdoor (global) testing of PV cells, submodules, modules, and arrays. The group also provides in house engineering and analysis to identify and determine how technical issues such as cell/module/system adaptations, long term stability, reliability, economics, materials availability, safety, and environmental impacts affect the development and ultimate use of advanced PV thin film, innovative cell, and material technologies. A major thrust of the research effort is to develop and utilize instrumentation and procedures for monitoring and analyzing PV cells and submodules including outdoor performance and stability testing and life cycle accelerated stress testing. To accomplish the above, the solar energy research institute (SERI) outdoor PV test facility was established in 1982. The group has designed testing systems and analysis procedures for, and has tested, numerous amorphous silicon thin film submodules provided by SERI subcontractors and has performed long term outdoor stability tests on CdS/CuIr Se sub 2 and hydrogen passivated silicon solar cells. A significant contribution from this facility over the past year was the testing of large area amorphous silicon submodules.