Molybdenum speciation tracking hydrocarbon migration in fine-grained sedimentary rocks
Explore the source record for details and available documents.
Ardakania, Omid H.↗
SEARCH · Search NASA
Results for “Sedimentary”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Impact of Multiscale Mineralogical and Sedimentary Heterogeneity on Mechanical Behavior of Mancos Shale.
Abstract not provided.
Yoon, Hongkyu↗
Sedimentary Geothermal Resources in Nevada, Utah, Colorado, and Texas
The objectives of this project were to (1) perform a literature review of sedimentary geothermal resources, (2) identify data sources and develop data-collection methodologies that characterize selected resources, (3) screen sedimentary basins and formations for sedimentary geothermal potential, and (4) evaluate the technical feasibility of one or more selected locations. Numerous publications have characterized geothermal resources within sedimentary basins. A literature search reviewed publications describing resources located in Colorado, Louisiana, Nevada, Texas, Utah, and Wyoming. The most attractive resources have high temperature gradients, low drilling costs, and reservoir permeabilities greater than 10 millidarcies (mD). Prospects in Colorado, Nevada, Texas, and Utah exhibit attractive characteristics and were chosen for further analysis. Sedimentary resources in Nevada and Utah are most attractive, followed by tested resources in Texas and untested resources in Colorado. The identified resources in Wyoming and Louisiana had lower geothermal gradients and were not evaluated. Reservoir modeling and techno-economic analysis were performed at Marys River Basin–North in Nevada. Geothermal energy production at this location is expected to have a levelized cost of energy (LCOE) ranging between 10 and 20 cents/kWh. Additional work may result in lower LCOE estimates at this location and at other attractive prospects in these three regions. The Great Basin carbonate and alluvial aquifer system of eastern Nevada and western Utah includes a lower carbonate aquifer unit, which has the potential for hosting both conduction- and convection-dominated geothermal systems. Mapping has identified lateral thickness variability expressed as a roughly 120–150-km-wide central corridor, which hosts the thickest and most continuous formations and extends from near Las Vegas north to the Idaho border. Purchase and analysis of privately held legacy seismic data could potentially compensate for the lack of sufficient data documenting measured depth to the lower carbonate aquifer unit. Multiple orogenies, extension episodes, and intrusive events have deformed and displaced the target formations of the lower carbonate aquifer unit. This structural complexity and potential for dipping reservoirs emphasizes the need for detailed geological, geophysical, and reservoir modeling. Heat flow within three Colorado sedimentary basins reviewed as part of this study was calculated in targeted studies by the Colorado Geologic Survey and Colorado School of Mines. These calculations are based on bottom-hole temperature data sets with significant limitations and some variability but produce values consistently higher than the global continental average of 65 mW/m2 for all three basins. Heat flow in the Raton Basin is the highest; however, permeability measurements from specific sedimentary formations with high heat flow have not been obtained. Promising formations for sedimentary geothermal systems were found in all three regions studied—Nevada-Utah, Colorado, and Texas. The next steps for developing sedimentary geothermal resources vary due to differences in available data and resource uncertainties. Additional scopes of work are recommended for identified basins in these three regions.
15 GEOTHERMAL ENERGY↗
Nationwide cost and capacity estimates for sedimentary basin geothermal power and implications for geologic CO 2 storage
Sedimentary basins are naturally porous and permeable subsurface formations that underlie approximately half of the United States. In addition to being targets for geologic CO 2 storage, these resources could supply geothermal power: sedimentary basin geothermal heat can be extracted with water or CO 2 and used to generate electricity. The geothermal power potential of these basins and the accompanying implication for geologic CO 2 storage are, however, understudied. Here, we use the Sequestration of CO 2 Tool (SCO2T PRO ) and the generalizable GEOthermal techno-economic simulator (genGEO) to address this gap by a) estimating the cost and capacity of sedimentary basin geothermal power plants across the United States and b) comparing those results to nationwide CO 2 sequestration cost and storage potential estimates. We find that across the United States, using CO 2 as a geothermal heat extraction fluid reduces the cost of sedimentary basin power compared to using water, and some of the lowest cost capacity occurs in locations not typically considered for their geothermal resources (e.g., Louisiana, South Dakota). Additionally, using CO 2 effectively doubles the sedimentary basin geothermal resource base, equating to hundreds of gigawatts of new capacity, by enabling electricity generation in geologies that are otherwise (with water) too impermeable, too thin, too cold, or not deep enough. We find there is competition for the best sedimentary basin resources between water- and CO 2 -based power, but no overlap between the lowest-cost resources for CO 2 storage and CO 2 -based power. In this way, our results suggest that deploying CO 2 -based power may increase the cost of water based systems (by using the best resources) and the cost of CO 2 storage (by storing CO 2 in locations that otherwise may not be targeted). As such, our findings demonstrate that determining the best role for sedimentary basins within the energy transition may require balancing tradeoffs between competing priorities.
CPG↗
On a Unified Core Characterization Methodology to Support the Systematic Assessment of Rare Earth Elements and Critical Minerals Bearing Unconventional Carbon Ores and Sedimentary Strata
A significant gap exists in our understanding and ability to predict the spatial occurrence and extent of rare earth elements (REE) and certain critical minerals (CM) in sedimentary strata. This is largely due to a lack of existing, systematic, and well-distributed REE and CM samples and analyses in United States sedimentary basins. In addition, the type of sampling and characterization performed to date has generally lacked the resolution and approach required to constrain geologic and geographic heterogeneities typical of subsurface, mineral resources. Here, we describe a robust and systematic method for collecting core scale characterization data that can be applied to studies on the contextual and spatial attributes, the geologic history, and lithostratigraphy of sedimentary basins. The methods were developed using drilled cores from coal bearing sedimentary strata in the Powder River Basin, Wyoming (PRB). The goal of this effort is to create a unified core characterization methodology to guide systematic collection of key data to achieve a foundation of spatially and geologically constrained REEs and CMs. This guidance covers a range of measurement types and methods that are each useful either individually or in combination to support characterization and delineation of REE and CM occurrences. The methods herein, whether used in part or in full, establish a framework to guide consistent acquisition of geological, geochemical, and geospatial datasets that are key to assessing and validating REE and CM occurrences from geologic sources to support future exploration, assessment, and techno-economic related models and analyses.
54 ENVIRONMENTAL SCIENCES↗
Geothermal Play Fairway Analysis of Low-Temperature Resources for Sedimentary Basin Geothermal Play Types: An Example in the Denver Basin
This project is part of a nationwide effort to highlight the advantages of incorporating low-temperature geothermal resource evaluation into the implementation of combined heat and power (CHP), and geothermal direct use (GDU) technologies (e.g., space heating and/or cooling). The initiative aims to hasten the nation's decarbonization process by exploring the potential for using low-temperature geothermal resources (< 150 Degrees Celsius) in selected sedimentary basins that have several population centers. The Play Fairway Analysis (PFA) techniques were modified from earlier studies of sedimentary basin geothermal play types (SBGPTs) that assessed the viability of low-temperature resources. The decision-making process for leveraging low-temperature geothermal resources for GDU and CHP applications is complex and considers a variety of factors, including geological, economic, and risk criteria. This study covers workflows, relevant datasets, python code, and both common and composite maps used to create low-temperature geothermal resource favorability maps for the Denver Basin, which extends across Colorado, Nebraska, and Wyoming. The replication of these methodologies in other SBGPTs can evaluate potential for low-temperature resources. The proposed geothermal PFA approach for low-temperature geothermal resources includes: (1) identifying available relevant data and grouping data sets into PFA criteria (e.g., geological, economic, and risk criteria); (2) analyzing data gaps enable future focalized exploration; (3) performing uncertainty quantification; (4) weighting relevant data; (5) developing favorability and common risk maps for low-temperature geothermal resources to identify potential locations for more focused data collection. This project will facilitate future deployment of CHP and GDU by providing data, tools, and a workflow applicable to low-temperature geothermal resources in sedimentary basins.
15 GEOTHERMAL ENERGY↗
Mineralogical, magnetic and geochemical data constrain the pathways and extent of weathering of mineralized sedimentary rocks
The oxidative weathering of sulfidic rock can profoundly impact watersheds through the resulting export of acidity and metals. Weathering leaves a record of mineral transformation, particularly involving minor redox-sensitive phases, that can inform the development of conceptual and quantitative models. In sulfidic sedimentary rocks, however, variations in depositional history, diagenesis and mineralization can change or overprint the distributions of these trace minerals, complicating the interpretation of weathering signatures. Here we show that a combination of bulk mineralogical and geochemical techniques, micrometer-resolution X-ray fluorescence microprobe analysis and rock magnetic measurements, applied to drill core samples and single weathered fractures, can provide data that enable the development of a geochemically consistent weathering model. This work focused on one watershed in the Upper Colorado River Basin sitting within the Mesaverde Formation, a sedimentary sandstone bedrock with disseminated sulfide minerals, including pyrite and sphalerite, that were introduced during diagenesis and subsequent magmatic-hydrothermal mineralization. Combined analytical methods revealed the pathways of iron (Fe), carbonate and silicate mineral weathering and showed how pH controls element retention or release from the actively weathering fractured sandstone. Drill core logging, whole rock X-ray diffraction, and geochemical measurements document the progression from unweathered rock at depth to weathered rock at the surface. X-ray microprobe analyses of a 1-cm size weathering profile along a fracture surface are consistent with the mobilization of Fe(II) and Fe(III) into acidic pore water from the dissolution of primary pyrite, Fe-sphalerite, chlorite, and minor siderite and pyrrhotite. These reactions are followed by the precipitation of secondary minerals such as of goethite and jarosite, a Fe-(oxyhydr)oxide and hydrous Fe(III) sulfate, respectively. Microscale analyses also helped explain the weathering reactions responsible for the mineralogical transformations observed in the top and most weathered section of the drill core. For example, dissolution of feldspar and chlorite neutralizes the acidity generated by Fe and sulfide mineral oxidation, oversaturating the solution in both Fe-oxides. The combination of X-ray spectromicroscopy and magnetic measurements show that the Fe(III) product is goethite, mainly present either as a coating on fracture surfaces in the actively weathering region of the core or more homogeneously contained within the unconsolidated regolith at the top of the core. Low-temperature magnetic data reveal the presence of ferromagnetic Fe-sulfide pyrrhotite that, although it occurs at trace concentrations, could provide a qualitative proxy for unweathered sulfide minerals because the loss of pyrrhotite is associated with the onset of oxidative weathering. Pyrrhotite loss and goethite formation are detectable through room-temperature magnetic coercivity changes, suggesting that rock magnetic measurements can determine weathering intensity in rock samples at many scales. In conclusion, this work contributes evidence that the weathering of sulfidic sedimentary rocks follows a geochemical pattern in which the abundance of sulfide minerals controls the generation of acidity and dissolved elements, and the pH-dependent mobility of these elements controls their export to the ground- and surface-water.
58 GEOSCIENCES↗
Applicability of 1D site response analysis to shallow sedimentary basins: A critical evaluation through physics-based 3D ground motion simulations
One-dimensional site response analysis (1D SRA) remains the standard practice in considering the effect of local soil deposits and predicting site-specific ground motions, although its range of applicability to realistic seismic wavefields is still in question. In this 1D approach, horizontal and vertical ground shaking are assumed to be induced by vertically propagating shear and compressional waves, respectively. A recent study based on analytical two-dimensional (2D) plane waves and simple point source earthquake simulations has shown two mechanistic limitations in this 1D modelling technique for general inclined seismic waves, that is, systematic over-prediction of the vertical motion and wave trapping in the 1D soil column. In this article, we evaluate in detail the applicability of this 1D modelling approach to realistic three-dimensional (3D) simulated seismic wavefields in shallow sedimentary basins. Linear-viscoelastic 1D SRA predictions using two types of input motions that are commonly used in practice—rock outcrop and in-column motions, are compared with the reference true site response results from 3D earthquake simulations in terms of various measures in the frequency and time domain. It is shown that the horizontal motion in the 3D seismic wavefield exhibits dominant shear wave propagation phenomenon, while the vertical motion is a combined effect of compressional and shear waves and can be over-predicted by the 1D approach when the incident seismic waves are inclined. Direct evidence of the wave refraction process that leads to the vertical motion over-prediction is provided. 1D SRA with in-column inputs can yield motions that have significantly longer duration compared to the true 3D site response solution due to trapped waves, casting in doubt the frequent need for increased soil damping in existing site studies to compensate for wave attenuation due to scattering alone. Sensitivity investigation on the increase of soil profile damping by a multiplier D mul shows D mul values compatible with those found in the literature for both horizontal and vertical motions. It is shown that the level of D mul optimized for a best match of the spectral acceleration is dependent on the characteristic of the input motion and a larger D mul is typically required for the vertical component. In contrast, 1D SRA with outcrop motions predicts motions with shorter significant duration due to its inability to capture the basin-edge generated surface waves. A suite of ground motion simulations was performed to assess the sensitivity of the observations to the basin geologic structure including the velocity gradient, rock-basin impedance contrast and basin depth. The analysis results show that the accuracy of the simplified 1D procedure is dependent on the wavefield composition of both the input motions and the true 3D site response solution. While the horizontal motions in shallow sedimentary basins can, to the first order, be reasonably captured by the simplified 1D approach, 1D SRA for the vertical component is in general not reliable and contributions from inclined shear waves should be accounted for in site-specific evaluation of the vertical design ground motion.
1D assumption↗
A Geo-Data Science Method for Assessing Unconventional Rare-Earth Element Resources in Sedimentary Systems
Abstract Rare-earth elements (REEs) supply raw materials that constitute many of our modern critical infrastructure, defense, technology, and electrification needs. Despite REE accumulations occurring in conventional bedrock and ion-adsorption deposits sourced from weathering of igneous rocks, unconventional host materials such as coal and related sedimentary strata have been identified as promising sources of REEs to meet growing demand. To maximize the potential of unconventional resources such as REE-coal systems, new approaches are needed overcome challenges from mineral systems with no known deposits and areas with sparse geochemical data. This article presents a systematic knowledge-data resource assessment method for predicting and identifying REE resource potential and occurrence in these unconventional systems. The method utilizes a geologic and geospatial knowledge-data approach informed and guided by REE accumulation mechanisms to systematically assess and identify areas of higher enrichment. An assessment of the Powder River Basin is presented as a test case to demonstrate the method workflow and results. The key output is a potential enrichment score map reported with varying confidence levels based on the amount of supporting evidence. Results from the test case indicate several locations with promising potential for different types of coal-REE deposits, demonstrating the viability of the method for exploration and assessment of unconventional REE resources. The method is flexible by design and, with sufficient applicable knowledge and data, can be adapted for assessing critical mineral systems in other sedimentary systems as well.
58 GEOSCIENCES↗
Prospective Seal Name Catalog for U.S. Sedimentary Basins V1.0
The Prospective Seal Name Catalog for U.S. Sedimentary Basins V1.0 is an aggregation of prospective seal units for prospective storage resources within the USA for geologic carbon storage in both onshore and offshore basins. The catalog is intended to guide users to available literature and data resources. Prospective seal names are displayed with respect to the associated prospective storage resource target, for which the specified prospective seal may act as a confining layer for CO2 storage. A prospective seal unit’s lithology, position with respect to the reservoir (Primary, Secondary, Intraformational, etc.), and age (Geologic Period) are included when stated in the original literature or data resource. The information source for each record in the catalog includes the published citation, year of publication, resource type (Journal Article, Event Proceedings, etc.) and additional record notes.
Basin↗
Prospective Seal Unit Spatial Extent Database for U.S. Sedimentary Basins
The Prospective Seal Unit Spatial Extent Database for U.S. Sedimentary Basins contains a series of spatial datasets representing spatial extents of publicly available data for caprock and seal rock units within the Appalachian Basin, Denver-Julesburg Basin, Great Valley Basin (Sacramento and San Joaquin Basins), Illinois Basin, Michigan Basin, San Juan Basin, U.S. Gulf Coast Basin, and Williston Basin. The database is designed to support carbon storage feasibility and resources assessment for carbon transport and storage (CTS) projects while displaying the spatial extent of prospective seal units and provide a guide to the original data source. This database leverages publicly available data resources from authoritative sources (e.g. U.S. Geological Survey, State Geologic Surveys, and published reports), and aims to help guide users to understand the seal unit's spatial coverage and data gaps from the regional to sub-basin/field scale. The database is organized by seal unit/formation, including the spatial extent for data found to be available for the seal unit. The various datasets represented include spatial extents of the lithologic formation, depth to top structural contour maps, and thickness/isopach maps. Included in this submission are the following resources: 1. Geodatabase/Dataset: “prospective-seal-unit-extents-2025.gdb” 2. ReadMe: “readme-prospective-seal-unit-spatial-extent-dataset-2025.pdf” 3. Data Catalog: “prospective-seal-unit-spatial-extents-data-catalog-2025.xlsx” 4. Data Sources Key: “data-source.csv” Please see NETL disclaimers here: https://netl.doe.gov/home/disclaimer
Basin↗
Changes in Sedimentary Phosphorus Burial Following Artificial Eutrophication of Lake 227, Experimental Lakes Area, Ontario, Canada
Lake 227 of the Experimental Lakes Area (ELA) in Ontario, Canada has been fertilized with phosphorus (P) since 1969, which resulted in a rapid transition from oligotrophic to eutrophic conditions. Sediment cores collected from the oxygenated epilimnion and the mostly anoxic hypolimnion of this unique lake contain a historical record of the changes in sediment P speciation and burial rates across the trophic transition. To elucidate these changes, results of chemical extractions were combined with 210 Pb sediment dating, and with 31 P NMR, Mössbauer and XANES spectroscopies. Prior to 1969, organic P (P Org ) was the major sedimentary P sink in Lake 227. Eutrophication of the lake coincided with marked increases in the burial rate of total P (TP), as well as in the relative contribution of the NaHCO 3 -extractable P pool (humic-bound P, P Hum ). Together, P Hum and P Org account for ≥70% of total P burial in the sediments deposited since artificial fertilization started. The P Hum fraction likely comprises phosphate complexes with humic substances. The strong linear correlation between P and iron (Fe) extracted by NaHCO 3 implies a close association of the two elements in the humic fraction. Mössbauer and XANES spectra further indicate that most Fe in the post-1969 sediments remained in the Fe(III) oxidation state, which is attributed to the stabilization of reducible Fe by organic matter, in part via the formation of phosphate-Fe(III)-humic complexes. Importantly, our results show that the eutrophication experimentation of Lake 227 caused the accumulation of a large reservoir of reactive sediment P, which may continue to fuel internal P loading to the water column once artificial fertilization is terminated.
54 ENVIRONMENTAL SCIENCES↗
Cooling-induced reactivation of distant faults during long-term geothermal energy production in hot sedimentary aquifers
Deep geothermal energy (DGE) represents an opportunity for a sustainable and carbon-free energy supply. One of the main concerns of DGE is induced seismicity that may produce damaging earthquakes, challenging its widespread exploitation. It is widely believed that the seismicity risk can be controlled by using doublet systems circulating water to minimize the injection-induced pressure changes. However, cold water reinjection may also give rise to thermal stresses within and beyond the cooled region, whose potential impacts on fault reactivation are less well understood. Here, we investigate by coupled thermo-hydro-mechanical modeling the processes that may lead to fault reactivation in a hot sedimentary aquifer (HSA) in which water is circulated through a doublet. We show that thermal stresses are transmitted much ahead of the cooled region and are likely to destabilize faults located far away from the doublet. Meanwhile, the fault permeability mainly controls the fault reactivation timing, which entails the importance of employing appropriate characterization methods. This investigation is crucial for understanding the mechanisms controlling induced seismicity associated with DGE in a HSA and allows the success of future DGE projects.
15 GEOTHERMAL ENERGY↗
Towards A Geo-Data Science Method for Assessing Rare Earth Element and Critical Mineral Occurrences in Coal and Other Sedimentary Systems
While preliminary analyses of data from open-source resources (Ekmann, 2012) show promising concentrations of REE in individual coal samples from a number of sites and basins in the U.S., other sparse data for REE in domestic coal-related strata suggest that many occurrences are low, “subeconomic” concentrations. At present, there is no method for systematically assessing potential sedimentary occurrences of REE. However, the geologic processes responsible for REE occurrences in coal-related strata are systematic; the unpredictability of REE resources in coal-related strata is due to poorly quantified spatial resource trends and the lack of an exploration method tailored to these resources. Thus, there exists a need for a systematic assessment approach that incorporates knowledge of geological variation in the mechanisms of REE enrichment within coal basins to help minimize geologic uncertainty and reduce commercial exploration risk.
01 COAL, LIGNITE, AND PEAT↗
Geothermal Heat Recovery Complex: Large-Scale, Deep Direct-Use System in a Low-Temperature Sedimentary Basin (Final Report)
A feasibility study of using deep direct-use (DDU) geothermal energy to heat agricultural research facilities (ARFs) was conducted at the University of Illinois at Urbana-Champaign (U of IL) and its similar application to military facilities in the Illinois Basin (ILB). The geothermal energy system (GES) investigated utilizes low-temperature (30–90°C; 90–190°F) geothermal fluid (i.e., brine) from an extraction well that is part of a deep, two-well (doublet) system that extends to the bottom of the ILB. The geothermal reservoir modeled, the Mt. Simon Sandstone (MSS), is about 1,280 m (4,200 feet) deep and 457 m thick (1,500 feet) beneath the U of IL. The DDU GES surface infrastructure includes heat exchangers connected in-parallel to pipelines carrying the geothermal fluid and fresh cold and hot water. Analysis of the GES indicated that the MSS can provide a baseload of 2 MMBtu/hr to heat the ARFs by extracting 954 m³/d (6,000 barrels/day [bbl/d]) of geothermal fluid that has a temperature of 44–46 °C (111–115 °F). In addition to analyzing the levelized cost of heat (LCOH) and life cycle costs, the environmental effects of the DDU GES were evaluated, including reduced greenhouse gas (GHG) emissions and water consumption. Multiple system designs were evaluated and then ranked based on their maximum heating performance, energy efficiency, and cost recovery. This feasibility study identified the key components of the fully-integrated DDU technology that can be implemented, both technically and economically. The results and information from this study provides end-users and policy makers with guidance for additional research on the specific components of DDU technology such that its widespread use can provide an uninterruptible energy source, increase resilience from extreme weather conditions, reduce U.S. dependency on fossil fuels, and reduce greenhouse gas (GHG) emissions. The site-specific part of this study gives U of IL administrators a realistic and pragmatic assessment of the financial resources necessary to add a DDU GES in the MSS to the campus’ energy portfolio.
15 GEOTHERMAL ENERGY↗
Using benthic macrofaunal assemblages to define habitat types on the northeast pacific sedimentary shelf and slope
Not Available
Henkel, Sarah K. (ORCID:000000028963547X)↗
Cadmium isotope systematics in sedimentary carbonate: Extending the utility of the cadmium isotope palaeo-productivity proxy
The cadmium (Cd) isotope compositions of seven Holocene (<11.7 ka) carbonate sediments, including the bulk carbonate, as well as the > 140 μm (zooplankton), <63 μm and < 20 μm (phytoplankton) fractions, and individual species of foraminifera isolated from the bulk carbonate were obtained for sub-samples processed using the Cd-cleaning and Mg/Ca cleaning methods. The respective Cd isotope systematics of each carbonate archive were then compared with the Cd isotope signature within the ocean using modern seawater data. We show that a constant Cd isotope fractionation factor of -0.25 ± 0.03 ‰ (2SE, n = 4) describes the partitioning of Cd from seawater into the carbonate phase ($Δ^{114}Cd_{CdC O_3 - seawater}$), allowing for accurate reconstructions of the past seawater nutrient regime. The Cd isotope signature of the < 63 µm and < 20 µm (phytoplankton) fractions can display comparable values to those recorded in the modern surface ocean, and can be used to model the magnitude of Cd uptake and utilisation in the past ocean. Individual species of planktic and benthic foraminifera, which inhabit different depths of the water column, can provide a full surface to deep water column reconstruction of the Cd nutrient regime, while infaunal benthic foraminifera can be used to interrogate the Cd isotope systematics of sediment porewaters. Bulk sediment and the > 140 µm (zooplankton) fraction also retain important information relating to the overlying water column Cd isotope systematics and can serve as essential archives for palaeo-productivity reconstructions where the separation of individual components from the bulk sediment is not possible. This new Cd isotope palaeo-productivity toolkit can considerably aid reconstruction efforts and vastly improves the ability to quantify the role of phytoplankton in modulating carbon sequestration through transitions in Earth’s climate evolution.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Low temperature and high pressure dramatically thicken the gas hydrate stability zone in rapidly formed sedimentary basins
Not Available
Portnov, Alexey (ORCID:0000000349308308)↗