Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shape and density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Defining the Shape Density of Cerium Oxide and Titanium Dioxide Aerosol

The “shape density” of CeO 2 (cerium oxide) powder (American Elements, Los Angeles CA) is estimated to be 0.82 ± 0.02 g cm -3 and the shape density for TiO 2 (titanium dioxide) powder (American Elements, Los Angeles CA) is estimated as 0.54 ± 0.01 g cm -3 . The “shape density” is defined as the measured loose density (ASTM 2018 and ASTM 2021) of a powder divided by the ICRP (International Commission on Radiological Protection) default aerosol shape factor (Valetin 2002). This information is used for experimental measurements of the RRF (respirable release factor) and other respirable source term parameter (US DOE 1994) experiments at the Los Alamos National Laboratory (LANL). The shape density is the input parameter to the TSI Inc (Shoreview MN) AIM (Aerosol Instrument Manager) software for the TSI model 3321 APS (Aerodynamic Particle Sizer) (Figure 1).

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

High Energy Density Shape Memory Polymers Using Strain-Induced Supramolecular Nanostructures

Shape memory polymers are promising materials in many emerging applications due to their large extensibility and excellent shape recovery. However, practical application of these polymers is limited by their poor energy densities (up to ~1 MJ/m 3 ). Here, we report an approach to achieve a high energy density, one-way shape memory polymer based on the formation of strain-induced supramolecular nanostructures. As polymer chains align during strain, strong directional dynamic bonds form, creating stable supramolecular nanostructures and trapping stretched chains in a highly elongated state. Upon heating, the dynamic bonds break, and stretched chains contract to their initial disordered state. This mechanism stores large amounts of entropic energy (as high as 19.6 MJ/m 3 or 17.9 J/g), almost six times higher than the best previously reported shape memory polymers while maintaining near 100% shape recovery and fixity. The reported phenomenon of strain-induced supramolecular structures offers a new approach toward achieving high energy density shape memory polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Quantifying the Influence of Size, Shape, and Density of Microplastics on Their Transport Modes: A Modeling Approach

Microplastics (MPs) pose significant risks to marine ecosystems and human health, necessitating accurate predictions of their distributions in aquatic environments for effective risk mitigation. However, understanding MP transport dynamics is challenging because of the inadequate representation of MP characteristics such as size, shape, and density in numerical models. Further, the accuracy of the MP vertical profiles in existing models has not been thoroughly validated. Thus, we developed an MP transport model within the Finite Volume Community Ocean Model framework (FVCOM-MP) by integrating MP characteristics. We validated FVCOM-MP against experimental and analytical data, focusing on various MP transport modes and transitions. FVCOM-MP successfully replicates MP profiles in different transport modes, including the bedload, surface-load, suspended-load, and mixed-load modes. Additionally, we introduce phase diagrams for classifying MP transport modes based on particle characteristics, enhancing our understanding of MP dynamics in aquatic systems. The transport modes for a number of real-world MP particles, including fishing line, plastic bag/bottle fragments, synthetic fibers, tire wear particles, polyvinyl chloride and expanded polystyrene pellets, were analyzed with these phase diagrams.

Microplastic transport, Settling velocity, Rising ↗
DOE OSTI2025

Establishing Models for Digital Twin of Hydropower Systems Using Probability Density Function Shaping

This paper introduces a digital twin modeling method for hydropower systems with Kaplan turbines using probability density function (PDF) shaping. We first use multilayer perceptron (MLP) model to build the discretized openloop Kaplan unit, where the MLP is trained by historical data. Then we use a proportional integral double derivative (PIDD) controller and a lead-lag exciter to test the obtained digital twin model in a closed-loop fashion. Simulation results show that the proposed digital twin modeling method can accurately capture the dynamics of the Kaplan hydropower unit. Finally, we show that the obtained digital twin can help to optimize the PIDD parameters. Compared with the original PIDD controller, the optimized one can achieve an over 90% improvement on the mean square tracking error.

Yin, Zhun [New York University]↗
DOE OSTI2024

SUNBIRD : a simulation-based model for full-shape density-split clustering

Combining galaxy clustering information from regions of different environmental densities can help break cosmological parameter degeneracies and access non-Gaussian information from the density field that is not readily captured by the standard two-point correlation function (2PCF) analyses. However, modelling these density-dependent statistics down to the non-linear regime has so far remained challenging. We present a simulation-based model that is able to capture the cosmological dependence of the full shape of the density-split clustering (DSC) statistics down to intra-halo scales. Our models are based on neural-network emulators that are trained on high-fidelity mock galaxy catalogues within an extended-ΛCDM framework, incorporating the effects of redshift-space, Alcock–Paczynski distortions, and models of the halo–galaxy connection. Our models reach sub-percent level accuracy down to $1 \, h^{-1}\text{Mpc}$ and are robust against different choices of galaxy–halo connection modelling. When combined with the galaxy 2PCF, DSC can tighten the constraints on ω cdm , σ 8 , and n s by factors of 2.9, 1.9, and 2.1, respectively, compared to a 2PCF-only analysis. DSC additionally puts strong constraints on environment-based assembly bias parameters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Voltage Probability Density Function Shaping Control Strategy Considering Grid Operational Uncertainties

It is well-known that power systems operation always affected by various uncertainties which make the bus voltage a random process that can be characterized by its probability density function (PDF) at any time instant. In this context, this paper presents a novel PDF-based voltage control framework for power systems. By modeling voltage as a stochastic process, we formulate a stochastic differential equationthat captures grid uncertainties. The associated Fokker-Planck-Kolmogorov equation is derived to describe the evolution of the voltage PDF, which enables the formulation of a PDF-shaping control strategy. To simplify the PDF control formulation, a B-spline neural network is introduced for real-time estimation and regulation of the voltage distribution. The proposed PDF control law updates voltage references for energy storage systems and synchronous generators using real-time PDF measurements and feedback signals. The proposed method is validated on a modified Kundur’s two-area system. Simulation results demonstrate that the controller can significantly improve the voltage stability under stochastic conditions, highlighting its effectiveness in modern inverter-rich grids.

Gui, Yonghao [ORNL] (ORCID:0000000250435534)↗
DOE OSTI2026

A fast and robust computational modeling approach for density and shape predictions in powder metallurgy hot isostatic pressing

Powder metallurgy hot isostatic pressing (PM-HIP) is an advanced manufacturing process that produces near-net-shape parts with high material utilization and uniform microstructures. PM-HIP is frequently used for producing small-scale parts with complicated geometries and is potentially economical for producing large-scale parts. However, excessive post-HIP shape distortions can reduce its effectiveness and economic advantage, especially for larger parts. A PM-HIP computational model can predict and help mitigate these distortions. However, due to complex deformation mechanisms and thermo-mechanical coupling present in PM-HIP processes, these non-linear computational models sometimes become numerically unstable. The numerical instabilities in these models can lead to very slow convergence or no convergence at all, which often translates to slow and unreliable models. These limitations are more pronounced in large models with complicated geometries. Hence, in this work, an alternative modeling approach is presented that improves numerical stability and computational performance. The presented approach achieves these improvements through approximating the fully coupled thermo-mechanical PM-HIP model as a decoupled model and adding inertial damping to the model’s mechanical part. In conclusion, a comparison with the fully coupled model indicated a slight dip in prediction accuracy (<5% error) but significant improvements in numerical stability (>20 times larger time step size) and computational performance (5-10 times speed-up with less computational resource usage) when using the presented approach.

Hot isostatic pressing↗
DOE OSTI2023

Relating storm-snow avalanche instabilities to data collected from the Differential Emissivity Imaging Disdrometer (DEID)

Storm-snow avalanches are challenging to forecast due to complex alpine terrain and during rapidly changing weather conditions. They can result in loss of lives and significant economic impact. We describe how a new device that continuously measures with high-frequency snowflake mass, size, density, and type, the Differential Emissivity Imaging Disdrometer (DEID), and show how the DEID can be used to aid avalanche forecasting when coupled with a storm-snow stability model. DEID measurements of snow accumulation, snow water equivalent (SWE), and snow density obtained during seventeen storms taken at the mid-Collins Snow-Study Plot at Alta Ski Area in Utah's Central Wasatch mountain range during winter 2020–2021 show excellent agreement with infrequent manual measurements. Additionally, two new variables, the Shape Density Index (SDI) and Complexity, are proposed and used to classify snowflake habit and estimate storm-snow shear strength. We illustrate how these DEID-derived data can be used to identify layers of concern in the storm snow such as density inversions, in real-time without digging snow pits. Furthermore, the DEID-data are used to run four variations of the SNOw Slope Stability model (SNOSS) for the storms investigated. The results are evaluated with data collected from tilt-board tests, infrasound measurements, and visual observations of avalanches. For a total fourteen storms analyzed, the DEID-driven SNOSS-modeled minimum stability index predicts the general stability of the storm-snow as indicated by observed avalanches, both natural and of unknown cause. Finally, the results provide a promising approach for nowcasting instabilities within storm-snow layers with a single instrument.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Three-dimensional measurements of fundamental plasma parameters in pulsed ICP operation

Radio frequency inductively coupled plasma sources are widely used in low temperature industrial processing. Recent computer simulations and experiments indicate significant improvement in processing results with the use of pulsed plasmas. We report three dimensional spatial and temporal measurements of fundamental plasma parameters in a pulsed Argon plasma in an industrial etch tool modified for diagnostic access. The pulse repetition rate is 1 kHz with 50% duty cycle. The density does not decay to zero at the end of the afterglow period, and this affects the initial conditions for the beginning of the next powered phase. At 5 mTorr, the plasma starts in the E-mode for each pulse and grows into a “ring” shape density profile. Subsequently, the profile evolves to peak in the middle of the chamber as it reaches a steady state toward the end of the active-glow. At 25 mTorr, the plasma density profile always peaks at the center of the chamber throughout the entire pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Secondary Organic Aerosol from OH Oxidation of Acyclic Terpenes Is More Viscous and Less Volatile than That of Their Cyclic Analogs

Biogenic volatile organic compounds (BVOCs), a dominant source of secondary organic aerosol (SOA) globally, exhibit emission rates and composition that are plant species-specific and vary with environmental stressors. A common outcome of plant stress is increased emissions of acyclic terpenes. The paucity of information about acyclic terpene SOA chemistry contributes to uncertainties in predictions of SOA global loadings and impacts on Earth’s radiative budget, particularly in a changing climate where acyclic terpene emissions could become more prominent. This study compared properties of SOA derived from OH oxidation of acyclic and cyclic monoterpenes (ß-ocimene, a-pinene) and sesquiterpenes (ß-farnesene, ß-caryophyllene). Single particle mass spectrometry was used for assessing shape, density, and evaporation kinetics of size-selected SOA particles, and nanospray desorption electrospray ionization high-resolution mass spectrometry (nano-DESI-HRMS) was used to measure molecular composition of SOA. Acyclic terpene SOA exhibited higher viscosity and lower volatility compared to cyclic terpene SOA, and had a greater volume fraction remaining (VFR) after ~24 hours of evaporation - approximately 1.3-1.6 times higher VFR than that of cyclic terpene SOA. Additionally, HRMS analysis revealed greater chemical diversity and higher fractions of extremely low volatility compounds (56-62% ELVOC/LVOC) in acyclic terpene SOA compared to cyclic counterparts (25-37% ELVOC/LVOC). Our findings highlight the potential importance of accounting for acyclic terpene aerosol chemistry under conditions of plant stress to improve predictions of SOA loadings and impacts.

SOA physical properties↗
DOE OSTI2023

Intrinsic alignment as an RSD contaminant in the DESI survey

ABSTRACT We measure the tidal alignment of the major axes of luminous red galaxies (LRGs) from the Legacy Imaging Survey and use it to infer the artificial redshift-space distortion signature that will arise from an orientation-dependent, surface-brightness selection in the Dark Energy Spectroscopic Instrument (DESI) survey. Using photometric redshifts to downweight the shape–density correlations due to weak lensing, we measure the intrinsic tidal alignment of LRGs. Separately, we estimate the net polarization of LRG orientations from DESI’s fibre-magnitude target selection to be of order 10−2 along the line of sight. Using these measurements and a linear tidal model, we forecast a 0.5 per cent fractional decrease on the quadrupole of the two-point correlation function for projected separations of 40–80 h−1 Mpc. We also use a halo catalogue from the Abacussummit cosmological simulation suite to reproduce this false quadrupole.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Grinding and Pelleting Characteristics of Municipal Solid Waste Fractions

The efficient utilization of low-cost carbon feedstocks, such as municipal solid waste (MSW), in biorefineries has become increasingly important for reducing GHG emissions and meeting the growing demand for renewable energy sources. However, MSW as a feedstock presents several challenges, including high moisture content, compositional variability, particle size and shape, density, and ash content. To address these challenges, the potential of mechanical dewatering and high-moisture pelleting processes for densifying MSW fractions, such as paper, cardboard, thin plastic, and thick plastic, into low-cost carbon feedstocks with improved handling and conversion properties were investigated. The effect of these preprocessing technologies on the critical quality attributes (CQAs) of the resulting pellets, including bulk density, durability, and size uniformity, were evaluated. The results showed that with these preprocessing technologies, the paper and cardboard fractions could be pelleted at moisture contents over 40% (w.b.) while achieving >99% durability and >300 kg/m3, while the high moisture plastic fractions were not suitable for pelleting. The thick plastic fraction processed in a screw press was shown to remove up to 30% of the moisture content in a single pass. These findings suggest that these mechanical preprocessing technologies can improve the physical properties of low-cost municipal solid waste fractions for biofuels production.

09 BIOMASS FUELS↗
DOE OSTI2019

Flow Characterization of Compressed Woody Biomass

Global interest for using terrestrial biomass as an energy source has been increasing recently due to potentially significant socio-economic and environmental benefits relative to fossil energy. Thermochemical biomass processes converting biomass to fuels are relatively well developed, e.g. for direct combustion, gasification, and pyrolysis. However, critical problems often arise when attempting to feed biomass into commercial-scale reactors continuously and without interruption. Biomass particles, whether derived from woody or agricultural feedstock, vary greatly in size, shape, density, and moisture content. High cohesiveness, low bulk density, and poor material flow characteristics often prevent continuous feeding due to bridging, rat-hole formation, blockage, and seal failures. Among all different types of feeders utilized to feed biomass into reactors, screw feeding has received significant attention in recent years. Screw feeders are fuel-specific and require careful design to be reliable, efficient, and economical, especially for reactors operating at elevated pressures. In order to mimic the flow properties of compressed biomass inside a compression-screw feeder, rheological properties of three types of compressed lignocellulosic biomass were investigated using a co-rotating twin screw microcompounder. Experiments were conducted to find the impact of moisture content, particle size and type, and screw speed on rheological properties of forest residual particles as well as sawdust. Increasing moisture from 10 to 50% reduced the apparent viscosity of the compressed biomass. Also, higher screw speeds (10 to 90 rpm) led to a lower relative viscosity. At elevated screw speeds, significant temperature differences were measured between the initial and final states, which should be accounted for in equipment design and operation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

The effect of plasma shaping on high density H-mode SOL profiles and fluctuations in TCV

Abstract The impact of plasma shaping on the properties of high density H-mode scrape-off layer (SOL) profiles and transport at the outer midplane has been investigated on Tokamakà configuration variable. The experimental dataset has been acquired by evolving the upper triangularity while keeping the other parameters constant. The scan comprises δ u p values between 0.0 and 0.6, excluding negative triangularity scenarios. Within this study, a transition from type-I edge localised modes to the quasi-continuous exhaust regime takes place from low to high δ u p . The modification of the upstream SOL profiles has been assessed, in terms of separatrix quantities, within the α t turbulence control parameter theoretical framework (Eich et al 2020 Nucl. Fusion 60 056016). The target parallel heat load and the upstream near-SOL density profiles have been shown to broaden significantly for increasing α t . Correspondingly, in the far SOL a density shoulder formation is observed when moving from low to high δ u p . These behaviours have been correlated with an enhancement of the SOL fluctuation level, as registered by wall-mounted Langmuir probes as well as the thermal helium beam diagnostic. Specifically, both the background and the filamentary-induced fluctuating parts of the first wall ion saturation current signal are larger at higher δ u p , with filaments being ejected more frequently into the SOL. Comparison of two pulses at the extremes of the δ u p scan range, but with otherwise same input parameters, shows that the midplane neutral pressure does not change much during the H-mode phase of the discharge. This indicates that indirect effects of the change in geometry, linked to first wall recycling sources, should not play a significant role. The total core radiation increases at high δ u p , on account of a stronger plasma–wall interaction and resulting larger carbon impurity intake from the first wall. This is likely associated to the enhanced first wall fluctuations, as well as a smaller outer gap and the close-to-double-null magnetic topology at high shaping.

Stagni, A. (ORCID:0000000180841544)↗
DOE OSTI2024

Faraday Rotation Measurements in High-Energy-Density Plasmas Using Shaped Laser Beams

Magnetic fields play an important role in plasma dynamics, yet it is a quantity difficult to measure accurately with physical probes, whose presence disturbs the very field they measure. The Faraday rotation of a polarized beam of light provides a mechanism to measure the magnetic field without disturbing the dynamics, and has been used with great success in astrophysics and high energy density plasma science, where physical probes cannot be used. Furthermore, the rotation is typically small, which degrades the accuracy of the measurement. Since polarization cannot be measured directly, detectors rely on a polarizer to measure a small change in beam intensity instead. In this work, we show how beam shaping can improve Faraday rotation measurements using an optical derivative setup. Since the rotation measurement is now strictly proportional to the beam shape and intensity, the system allows to improve the measurement accuracy simply by increasing the laser beam power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Routes to high-performance operation in Wendelstein 7-X: turbulence suppression with shaping of the density profile

Steep density gradients generally lead to improved plasma performance in the neoclassically optimized stellarator W7-X. This is evident in the global energy confinement time as well as in the ion temperature and can be explained by a strong reduction of the ion temperature gradient turbulence. Such conditions can experimentally be realized by several methods: injection of cryogenic hydrogen pellets, appropriate combination of neutral beam and electron cyclotron resonance heating (ECRH) and, in some cases, with low power of ECRH after preconditioning of the first wall. The duration of the improved phases is determined by the ability to sustain the steep density gradient, by technical limitations of the involved systems and, eventually, by the plasma stability. This paper gives an overview of relevant experimental results and presents example discharges where the improved confinement conditions could be extended to multiple seconds: up to 4 s using neutral beam injection and from 14 to 40 s with steady state pellet injection. In these plasmas the turbulent thermal diffusivity is reduced by a factor of 3 to 4 in a broad radial range, which allows high ion temperatures of up to 3 keV at the densities of about 1.5 • 10 20 m −3 .

high performance plasma↗
DOE OSTI2021

Galactic Potential and Dark Matter Density from Angular Stellar Accelerations

Here, we present an approach to measure the Milky Way (MW) potential using the angular accelerations of stars in aggregate as measured by astrometric surveys like Gaia. Accelerations directly probe the gradient of the MW potential, as opposed to indirect methods using, e.g., stellar velocities. We show that end-of-mission Gaia stellar acceleration data may be used to measure the potential of the MW disk at approximately 3σ significance and, if recent measurements of the solar acceleration are included, the local dark matter density at ~2σ significance. Since the significance of detection scales steeply as t 5/2 for observing time t, future surveys that include angular accelerations in the astrometric solutions may be combined with Gaia to precisely measure the local dark matter density and shape of the density profile.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Significant DBSCAN+: Statistically Robust Density-based Clustering

Cluster detection is important and widely used in a variety of applications, including public health, public safety, transportation, and so on. Given a collection of data points, we aim to detect density-connected spatial clusters with varying geometric shapes and densities, under the constraint that the clusters are statistically significant. The problem is challenging, because many societal applications and domain science studies have low tolerance for spurious results, and clusters may have arbitrary shapes and varying densities. As a classical topic in data mining and learning, a myriad of techniques have been developed to detect clusters with both varying shapes and densities (e.g., density-based, hierarchical, spectral, or deep clustering methods). However, the vast majority of these techniques do not consider statistical rigor and are susceptible to detecting spurious clusters formed as a result of natural randomness. On the other hand, scan statistic approaches explicitly control the rate of spurious results, but they typically assume a single “hotspot” of over-density and many rely on further assumptions such as a tessellated input space. To unite the strengths of both lines of work, we propose a statistically robust formulation of a multi-scale DBSCAN, namely Significant DBSCAN+, to identify significant clusters that are density connected. As we will show, incorporation of statistical rigor is a powerful mechanism that allows the new Significant DBSCAN+ to outperform state-of-the-art clustering techniques in various scenarios. We also propose computational enhancements to speed-up the proposed approach. Experiment results show that Significant DBSCAN+ can simultaneously improve the success rate of true cluster detection (e.g., 10–20% increases in absolute F1 scores) and substantially reduce the rate of spurious results (e.g., from thousands/hundreds of spurious detections to none or just a few across 100 datasets), and the acceleration methods can improve the efficiency for both clustered and non-clustered data.

Computer Science↗