Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shaped plasma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Assessment of the accuracy of plasma shape reconstruction by the Cauchy condition surface method in JT-60SA

For the purpose of stable plasma equilibrium control and detailed analysis, it is essential to reconstruct an accurate plasma boundary on the poloidal cross section in tokamak devices. The Cauchy condition surface (CCS) method is a numerical approach for calculating the spatial distribution of the magnetic flux outside a hypothetical surface and reconstructing the plasma boundary from the magnetic measurements located outside the plasma. The accuracy of the plasma shape reconstruction has been assessed by comparing the CCS method and an equilibrium calculation in JT-60SA with a high elongation and triangularity of plasma shape. The CCS, on which both Dirichlet and Neumann conditions are unknown, is defined as a hypothetical surface located inside the real plasma region. The accuracy of the plasma shape reconstruction is sensitive to the CCS free parameters such as the number of unknown parameters and the shape in JT-60SA. It is found that the optimum number of unknown parameters and the size of the CCS that minimizes errors in the reconstructed plasma shape are in proportion to the plasma size. Furthermore, it is shown that the accuracy of the plasma shape reconstruction is greatly improved using the optimum number of unknown parameters and shape of the CCS, and the reachable reconstruction errors in plasma shape and locations of strike points are within the target ranges in JT-60SA.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Validation of plasma shape reconstruction by Cauchy condition surface method in KSTAR

Cauchy Condition Surface (CCS) method is a numerical approach to reconstruct the plasma boundary and calculate the quantities related to plasma shape using the magnetic diagnostics in real time. It has been applied to the KSTAR plasma in order to establish the plasma shape reconstruction with the high elongation of plasma shape and the large effect of eddy currents flowing in the tokamak structures for the first time. For applying the CCS calculation to the KSTAR plasma, the effects by the eddy currents and the ferromagnetic materials on the plasma shape reconstruction are studied. The CCS calculation includes the effect of eddy currents and excludes the magnetic diagnostics, which is expected to be influenced largely by ferromagnetic materials. Calculations have been performed to validate the plasma shape reconstruction in 2012 KSTAR experimental campaign. Comparison between the CCS calculation and non-magnetic measurements revealed that the CCS calculation can reconstruct the accurate plasma shape even with a small I{sub P}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Reference Governor for Plasma-Shape Control in Tokamaks

Tokamaks are torus-shaped devices where a high-temperature, ionized gas (i.e. a plasma) is confined by means of helical magnetic fields. The ultimate goal of tokamaks is producing net electrical energy by means of nuclear-fusion reactions within the plasma. The shape of the plasma inside the tokamak is closely related with its confinement characteristics and, therefore, with the produced fusion power. In order to achieve and maintain plasma shapes that maximize the fusion yield, feedback controllers have been successfully developed during the years. However, machine-protection and plasma-stability requirements impose hard constraints on the plasma-shape targets that can be safely achieved by a feedback controller. In this work, a reference governor is proposed to provide, in real time, plasma-shape targets that fulfill the aforementioned safety requirements. The reference governor calculates such plasma-shape targets in response to changes in the state of the closed-loop system, as well as disturbances in the plasma energy and current. Here, the reference-governor design is based on a dynamical model of the plasma electromagnetic response. Simulation tests of the reference governor have been carried out for different plasma scenarios in the DIII-D tokamak to emulate realistic cases where safety may be compromised.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A pincer-shaped plasma sheet at Uranus

An MHD simulation of the terrestrial magnetosphere, rescaled to represent the Uranian magnetotail, is carried out. The 3p immersion can be explained in terms of possible extreme departures from average plasma sheet shapes in the Uranian magnetosphere. The orientation of the Uranian dipole and rotation axes produce a dynamically curved plasma sheet which is an unusual feature of the Uranian magnetosphere.

Hammond, C. Max↗

Effect of the plasma shapes on intrinsic rotation due to collisionless ion orbit loss in the tokamak edge plasmas

Distribution of the intrinsic rotation due to collisionless ion orbit loss near the tokamak edge region is studied by using an analytical model based on ion guiding center orbit approximation. A peak of the averaged ion orbit loss momentum fraction is found very near inside the separatrix region in a double null divertor configuration but is not found inside the last closed flux surface region in an outer limiter configuration. For the double null divertor configuration, the intrinsic rotation due to ion orbit loss depends on the plasma shape. With the increase in elongation and triangularity, the peak of the averaged ion orbit loss momentum fraction increases and it moves inward for the lower plasma current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of up-down asymmetry in plasma shape on RMP response

Shaping effect on the plasma response to the externally applied resonant magnetic perturbation field is investigated for both DIII-D and MAST experiments, utilizing toroidal modeling. The plasma boundary shape is systematically varied ranging from single-null (SN) to double-null (DN) configurations, while other equilibrium quantities are kept largely unchanged. The relative amplitude of the computed plasma surface displacement, between the top/bottom of the torus and the outboard mid-plane, is identified as the most reliable indicator that distinguishes the plasma response between the SN and DN configurations. Here, the underlying physics is the weakening of the edge-peeling component in the plasma response with increasing up-down symmetry of the plasma boundary shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma shape effects on the Alfvén eigenmode spectrum through Alfvén slow-magnetosonic wave coupling

In this report the effect of the plasma shaping (triangularity and elongation) on the continuous spectrum, frequency gaps, and number of eigenmodes is studied. The plasma shaping affects the coupling between Alfvén and slow magnetosonic waves via the geodesic magnetic curvature and the plasma pressure. The Alfvén-slow coupling creates a large number of new gaps in the continuous spectrum below the Alfvén frequency where discrete modes can reside. In ideal magnetohydrodynamic simulations a large number (a few hundred or more) of potential eigenmodes are found. The number of eigenmodes is correlated with the maximum geodesic curvature and a minimum number of possible discrete eigenmodes is found at a negative triangularity of -0.3. It is hypothesized that these possible eigenmodes form a low amplitude and dense discrete spectrum, which can be studied experimentally.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fully electromagnetic gyrokinetic eigenmode analysis of high-beta shaped plasmas

A new, more efficient method to compute unstable linear gyrokinetic eigenvalues and eigenvectors has been developed for drift-wave analysis of plasmas with arbitrary flux-surface shape, including both transverse and compressional magnetic perturbations. In high-beta, strongly shaped plasmas like in the National Spherical Torus Experiment (NSTX) [M. Ono et al., Nucl. Fusion 40, 557 (2000)], numerous branches of closely spaced unstable eigenmodes exist. These modes are difficult and time-consuming to adequately resolve with the existing linear initial-value solvers, which are further limited to the most unstable eigenmode. The new method is based on an eigenvalue approach and is an extension of the GYRO code [J. Candy and R. E. Waltz, J. Comput. Phys. 186, 545 (2003)], reusing the existing discretization schemes in both real and velocity-space. Unlike recent methods, which use an iterative solver to compute eigenvalues of the relatively large gyrokinetic response matrix, the present scheme computes the zeros of the much smaller Maxwell dispersion matrix using a direct method. In the present work, the new eigensolver is applied to gyrokinetic stability analysis of a high-beta, NSTX-like plasma. We illustrate the smooth transformation from ion-temperature-gradient (ITG)-like to kinetic-ballooning (KBM)-like modes, and the formation of hybrid ITG/KBM modes, and further demonstrate the existence of high-k Alfvenic drift-wave 'cascades' for which the most unstable mode is a higher excited state along the field line. A new compressional electron drift wave, which is driven by a combination of strong beta and pressure gradient, is also identified for the first time. Overall, we find that accurate calculation of stability boundaries and growth rates cannot, in general, ignore the compressional component {delta}B{sub ||} of the perturbation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress on laser plasma accelerator development using transverselyand longitudinally shaped plasmas

A summary of progress at Lawrence Berkeley National Laboratory is given on: (1) experiments on down-ramp injection; (2) experiments on acceleration in capillary discharge plasma channels; and (3) simulations of a staged laser wakefield accelerator (LWFA). Control of trapping in a LWFA using plasma density down-ramps produced electron bunches with absolute longitudinal and transverse momentum spreads more than ten times lower than in previous experiments (0.17 and 0.02 MeV Ic FWHM, respectively) and with central momenta of 0.76 +- 0.02 MeV Ic, stable over a week of operation. Experiments were also carried out using a 40 TW laser interacting with a hydrogen-filled capillary discharge waveguide. For a 15 mm long, 200 mu m diameter capillary, quasi-monoenergetic bunches up to 300 MeV were observed. By detuning discharge delay from optimum guiding performance, self-trapping was found to be stabilized. For a 33 mm long, 300 mu m capillary, a parameter regime with high energy bunches, up to 1 Ge V, was found. In this regime, peak electron energy was correlated with the amount of trapped charge. Simulations show that bunches produced on a down-ramn and iniected into a channel-guided LWFA can produce stable beams with 0.2 MeV Ic-class momentum spread at high energies.

43 PARTICLE ACCELERATORS↗

Aspects of Three Dimensional Transport for ELM Control Experiments in ITER-Similar Shape Plasmas at Low Collisionality in DIII-D

A study of three-dimensional (3D) perturbed magnetic field structures and transport for edge localized mode control experiments with resonant magnetic perturbations at DIII-D is presented. We focus on ITER-Similar Shape plasmas at ITER relevant electron pedestal collisionalities. nu(e)* similar to 0.2. This study is performed in comparison with results from TEXTOR-Dynamic Ergodic Divertor circular limiter plasmas. For both experiments the magnetic field structure is analyzed in the vacuum paradigm-superimposing the external RMP field on the unperturbed equilibrium. For TEXTOR L-mode plasmas this description holds for normalized poloidal flux Psi(N) > 0.7 without tearing modes driven by the RMP field. For DIII-D H-mode plasmas the validity of this approach still needs to be established. In this paper a method is discussed to diagnose the degree of edge stochastization based on a comparison between modeled magnetic footprints on the divertor targets and experimental data. Clear evidence is presented for the existence of a generic separatrix perturbation causing striation of target particle fluxes. However, heat fluxes into these striations are small. This observation can be explained by accounting for the different heat and particle source locations and the 3D trajectories of the open, perturbed field lines toward the divertor target. Analysis of the transport characteristics filling the perturbed separatrix lobes based on initial EMC3/EIRENE modeling suggests the existence of open field lines connecting the stochastic edge to the target pattern. However, the width and inward most extent of the actual stochastic layer cannot yet be quantified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma shape and position control development for NSTX-U using the GSEvolve plasma simulator

NSTX-U discharges have been reproduced using the GSEvolve plasma simulator in order to improve their control and reduce oscillations during the plasma current (Ip) ramp-up phase, and with the ultimate goal of enabling reliable H-mode access with a double-null shape at high elongation, low internal inductance, and high plasma performance. The control objective is to eliminate undesired oscillations in the plasma shape and vertical position that start when the plasma diverts during the Ip ramp-up phase, and that happened recurrently during the first NSTX-U experimental campaign. Model-based control solutions have been developed, including alternative H-mode access recipes and a Multi-Input Multi-Output (MIMO) decoupling controller. These solutions have demonstrated their capability to reduce or eliminate the aforementioned oscillations in GSEvolve simulations, enabling reproducible H-mode access. The results of this work aim to inform NSTX-U experimental operations on potential control developments to maximize its scientific output, and highlight the powerful capabilities of high-fidelity control-simulation frameworks like GSEvolve.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Different roles of elongation and triangularity in the H-mode pedestal height enhancement through strong plasma shaping

While the peeling–ballooning mode is known to be stabilized by strong plasma shaping in a high-confinement mode (H-mode), a significant difference is found in the roles of elongation and triangularity. The elongation mainly stabilizes the high-n ballooning branch, while the triangularity of the low-n peeling one with some destabilization of the high-n ballooning one, where n is the toroidal mode number. This difference is conjectured mainly due to the magnetic shear effect which is substantially enhanced in a high triangularity regime, giving a destabilization on the ballooning branch, while a stabilization on the peeling one. As shown here, an important consequence of these different roles of the two shape parameters is that they should work together to stabilize simultaneously both branches of the PBM, implying the necessity of synergy between them for the large pedestal height enhancement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma shaping effects on the geodesic acoustic mode in the large orbit drift width limit

Plasma shaping effects on the geodesic acoustic mode (GAM) are revisited analytically in the large orbit drift width limit. Comparing with results from the small orbit drift width expansion method [Z. Gao et al., Phys. Plasmas 15, 074502 (2008)] the behavior of the real frequency is almost the same but the effect on the damping rate is different due to the change of dominant resonant mechanism, from low order harmonic transit resonance to high order harmonic resonance, or equivalently, to the magnetic drift resonance. As a result, although the GAM frequency decreases with an increasing elongation {kappa} by dependence of [2/({kappa}{sup 2}+1)]{sup 1/2}, the damping is weakened mildly in the large orbit drift width limit, which is quite different from the result in the low small orbit drift limit, where the damping is enhanced exponentially with the decrease in frequency. Also, in the large orbit drift width limit, the dependence of the GAM damping rate on inverse aspect ratio {epsilon} is analytically obtained for the first time. As {epsilon} increases, the frequency behaves as a weakly decreasing parabola function of {epsilon}, and the damping rate increases parabolically, but more rapidly than the frequency decreases. The GAM with longer radial wavelength is more easily damped by the finite aspect ratio effect. It is also found that the Shafranov shift gradient has the similar effect as the inverse aspect ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of plasma shaping on high density H-mode SOL profiles and fluctuations in TCV

Abstract The impact of plasma shaping on the properties of high density H-mode scrape-off layer (SOL) profiles and transport at the outer midplane has been investigated on Tokamakà configuration variable. The experimental dataset has been acquired by evolving the upper triangularity while keeping the other parameters constant. The scan comprises δ u p values between 0.0 and 0.6, excluding negative triangularity scenarios. Within this study, a transition from type-I edge localised modes to the quasi-continuous exhaust regime takes place from low to high δ u p . The modification of the upstream SOL profiles has been assessed, in terms of separatrix quantities, within the α t turbulence control parameter theoretical framework (Eich et al 2020 Nucl. Fusion 60 056016). The target parallel heat load and the upstream near-SOL density profiles have been shown to broaden significantly for increasing α t . Correspondingly, in the far SOL a density shoulder formation is observed when moving from low to high δ u p . These behaviours have been correlated with an enhancement of the SOL fluctuation level, as registered by wall-mounted Langmuir probes as well as the thermal helium beam diagnostic. Specifically, both the background and the filamentary-induced fluctuating parts of the first wall ion saturation current signal are larger at higher δ u p , with filaments being ejected more frequently into the SOL. Comparison of two pulses at the extremes of the δ u p scan range, but with otherwise same input parameters, shows that the midplane neutral pressure does not change much during the H-mode phase of the discharge. This indicates that indirect effects of the change in geometry, linked to first wall recycling sources, should not play a significant role. The total core radiation increases at high δ u p , on account of a stronger plasma–wall interaction and resulting larger carbon impurity intake from the first wall. This is likely associated to the enhanced first wall fluctuations, as well as a smaller outer gap and the close-to-double-null magnetic topology at high shaping.

Stagni, A. (ORCID:0000000180841544)↗

Investigation of the plasma shaping effects on the H-mode pedestal structure using coupled kinetic neoclassical/MHD stability simulations

The effects of plasma shaping on the H-mode pedestal structure are investigated. High fidelity kinetic simulations of the neoclassical pedestal dynamics are combined with the magnetohydrodynamic (MHD) stability conditions for triggering edge localized mode (ELM) instabilities that limit the pedestal width and height in H-mode plasmas. We use the neoclassical kinetic XGC0 code [Chang et al., Phys. Plasmas 11, 2649 (2004)] to carry out a scan over plasma elongation and triangularity. As plasma profiles evolve, the MHD stability limits of these profiles are analyzed with the ideal MHD ELITE code [Snyder et al., Phys. Plasmas 9, 2037 (2002)]. In simulations with the XGC0 code, which includes coupled ion-electron dynamics, yield predictions for both ion and electron pedestal profiles. The differences in the predicted H-mode pedestal width and height for the DIII-D discharges with different elongation and triangularities are discussed. For the discharges with higher elongation, it is found that the gradients of the plasma profiles in the H-mode pedestal reach semi-steady states. In these simulations, the pedestal slowly continues to evolve to higher pedestal pressures and bootstrap currents until the peeling-ballooning stability conditions are satisfied. The discharges with lower elongation do not reach the semi-steady state, and ELM crashes are triggered at earlier times. The plasma elongation is found to have a stronger stabilizing effect than the plasma triangularity. For the discharges with lower elongation and lower triangularity, the ELM frequency is large, and the H-mode pedestal evolves rapidly. It is found that the temperature of neutrals in the scrape-off-layer (SOL) region can affect the dynamics of the H-mode pedestal buildup. But the final pedestal profiles are nearly independent of the neutral temperature. The elongation and triangularity affect the pedestal widths of plasma density and electron temperature profiles differently. This provides a new mechanism of controlling the pedestal bootstrap current and the pedestal stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Shape Optimization for Steady-State Tokamak Development in DIII-D

For a more detailed account of the results summarized here and for references, see C.T. Holcomb et al., Phys. Plasmas 16, 056116 (2009). Advanced tokamak research on DIII-D is focused on developing a high fusion gain, steady-state scenario that would eliminate or greatly reduce the demands on an inductive transformer in future machines. Steady-state operation requires the inductively driven current density (j{sub Ind}) be zero everywhere. Most of the total current I{sub p} is typically from self-driven bootstrap current, with the remainder driven by external noninductive sources, such as neutral beam and radiofrequency current drive. This paper describes an extension of the fully noninductive condition (f{sub NI} {approx} 100%) to {approx}0.7 current relaxation times that was achieved by a combination of more available ECCD and new scientific insights. The insights are an optimization of performance through variation of the plasma shape parameter known as squareness ({zeta}) and an optimization of divertor magnetic balance. These optimizations simultaneously improve stability, confinement, and density control. These are each essential for achieving fully noninductive operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma shaping effects on the geodesic acoustic mode in toroidally axisymmetric plasmas

The geodesic acoustic mode (GAM) is studied in noncircular, finite aspect ratio, toroidal plasmas with a gyrokinetic theory and a local magnetohydrodynamics equilibrium model. Dependencies of the GAM frequency on finite aspect ratio and elongation are investigated when trapped particle effects are neglected in the large aspect ratio limit. It is found that the GAM frequency sharply decreases with an increasing elongation by dependence of [2/({kappa}{sup 2}+1)]{sup 1/2} and slightly decreases with an increasing inverse aspect ratio by dependence of about 1-3{epsilon}{sup 2}/4, where {kappa} and {epsilon} are the plasma elongation and inverse aspect ratio. The elongation dependence comes from the modification of classical ion polarization balanced by that of curvature drift polarization while the aspect ratio dependence is due to the former in the leading order.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear Methods for Current Limit Constraint Satisfaction in Tokamak Plasma Shape Control

The DIII-D tokamak is capable of supporting a wide variety of plasma equilibria because of its relatively large number of coils and their proximity to the plasma. To support its advanced tokamak mission, the DIII–D experimental program continues to push the envelope of this capability, frequently encountering limits imposed by allowable currents in poloidal shaping coils. Violation of current constraints is presently dealt with by operator adjustment of control targets and gains between plasma discharges. At the same time, demands for more precise and stable control have motivated efforts to develop and install advanced multivariable algorithms for control of plasma shape in DIII-D and other devices. Further, there is currently no way to ensure respect of nonlinear current constraints in a multivariable linear controller design and no practical way to manually tune these fully coupled controllers between discharges after installation. Various linear minimization schemes can be implemented to encourage currents to remain within limits, but adherence to these limits cannot be guaranteed by linear methods alone. In this paper, we describe ongoing efforts to provide methods that guarantee currents will not exceed preset limits, and that simultaneously achieve the best obtainable quality of control subject to current limit constraints.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗