Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shock tests.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Multi-Axis Resonant Plate Shock Testing Evaluation and Test Specification Development

Resonant plate testing is a shock test method that is frequently used to simulate pyroshock events in the laboratory. Recently, it was discovered that if the unit under test is installed at an off-center location, a tri-axial accelerometer would record a shock response in three directions and the resulting shock response spectra implied that the test may have qualified the component in three directions simultaneously. The purpose of this research project was to evaluate this idea of multi-axis shock testing to determine if it was truly a multi-axis shock environment and if such a test could be used as an equivalent component qualification test. A study was conducted using generic, additively manufactured components tested on a resonant plate, along with an investigation of plate motion to evaluate the component response to off- center plate excitation. The data obtained here along with the analytical simulations performed indicate that off-center resonant plate tests are actually not three-axis shock tests, but rather single axis shocks at an arbitrary angle dictated by the location of the unit under test on the plate. This conclusion is supported by the fact that only one vectored shock input is provided to the component in a resonant plate test. Thus, the output response is a coupled response of the transverse plate vibration and the rotational motion of the component on the plate. Additionally, a multi-axis shock test defined by three single axis test environments always results in a significant component over-test in one direction.

42 ENGINEERING↗

Pulse Shaping in 1D Elastic Waveguides for Shock Testing

Mechanical shock events experienced by electronics systems can be reproduced in the laboratory using Hopkinson bar tests. In these tests a projectile strikes an bar, creating a pulse which travels through the bar into the system. The quality of these tests depends on the closeness of the shape of the incident pulse to the shape specified for the test. This paper introduces a new way to control the shape of the incoming pulse, through the use of elastic metamaterial concepts. Two dispersion-modifying material concepts, phononic crystals, and local resonators, are examined for their wave shaping capabilities in 1D elastic waveguides. They are then evaluated using a transfer matrix method to determine the output wave shape in the time domain. The concepts are then optimized for various pulse shapes, showing that they are most effective when they are tuned to introduce dispersion near the fundamental frequency of the incident wave.

DeLima, Washington↗

Shock test assembly

An assembly for shock testing a specimen, the assembly including first and second opposing brackets and opposing lower and upper caps. The opposing brackets include lower and upper angled surfaces. The lower cap includes lower angled surfaces configured to engage the lower angled surfaces of the left and right brackets. The upper cap includes upper angled surfaces configured to engage the upper angled surfaces of the left and right brackets. The first and second brackets are configured to be drawn toward each other via fasteners, thereby wedging the lower and upper caps toward each other against the specimen.

Busenitz, Clark↗

Shock test assembly

An assembly for shock testing a specimen, the assembly including first and second opposing brackets and opposing lower and upper caps. The opposing brackets include lower and upper angled surfaces. The lower cap includes lower angled surfaces configured to engage the lower angled surfaces of the left and right brackets. The upper cap includes upper angled surfaces configured to engage the upper angled surfaces of the left and right brackets. The first and second brackets are configured to be drawn toward each other via fasteners, thereby wedging the lower and upper caps toward each other against the specimen.

Busenitz, Clark↗

Data Based Shock Test Specification

It is vital that avionic packages used for testing and certifying the reliability and safety of U.S. nuclear weapons with platform aircraft survive exposure to shock environments during transportation and delivery. The objective of this research was to characterize the response to these transportation shock environments delivering accurate shock test specifications in order to set laboratory programming material and device certification rigor. Responses to shock events were analyzed in the frequency domain via the Shock Response Spectrum (SRS). Shocks were then grouped based on respective behavior of maximum response accelerations which were pseudorandomly resampled and compared to test data to form test specifications based on the MinerPalmgren hypothesis. In addition to discovering significant over testing in current shock specifications, a new systematic, data-driven approach to designing shock specifications was formulated.

42 ENGINEERING↗

Multiphysics Simulations of Thermal Shock Testing of Nanofibrous High Power Targets

Increase of primary beam power for neutrino beam-lines leads to a reduced lifespan for production targets. New concepts for robust targets are emerging from the field of High Power Targetry (HPT); one idea being investigated by the HPT R&D Group at Fermilab is an electrospun nanofiber target. As part of their evaluation, samples with different densities were sent to the HiRadMat facility at CERN for thermal shock tests. The samples with the higher density, irradiated under a high intensity beam pulse, exhibit major damage at the impact site whereas those with the lower density show no apparent damage. The exact cause of this failure was unclear at the time. In this paper, we present the results of multiphysics simulations of the thermal shock experienced by the nanofiber targets that suggest the failure originates from the reduced permeability of the high density sample to air flow. The air present in the porous target expands due to heating from the beam, but is unable to flow freely in the high density sample, resulting in a larger back pressure that blows apart the nanofiber mat. We close with a discussion on how to further validate this hypothesis.

43 PARTICLE ACCELERATORS↗

Multiphysics Simulations of Thermal Shock Testing of Nanofibrous High Power Targets

Increase of primary beam power for neutrino beam-lines leads to a reduced lifespan for production targets. The field of High Power Targetry (HPT) is generating new concepts to meet the need for robust targets. One idea being investigated by the HPT Research and Development Group at Fermilab is an electrospun nanofiber target. As part of their evaluation, samples with different densities were sent to the HiRadMat facility at CERN for thermal shock tests. The samples with the higher density, irradiated under a high intensity beam pulse, exhibit major damages at the impact site whereas those with the lower density show no apparent damages. The exact cause of this failure was unclear at the time. In this paper, we present the results of multiphysics simulations of the thermal shock experienced by the nanofiber targets that suggest the failure originates from the reduced permeability of the high density sample to airflow. The air present in the porous target expands due to heating from the beam, but is unable to flow freely in the high density sample, resulting in a larger back pressure that blows apart the mat. We close with a discussion on how to further validate this hypothesis.

43 PARTICLE ACCELERATORS↗

High-g shock test results of Tadiran TLM-1530MP cells.

In April of 2009, testing was done of a high-g instrumentation device that utilized Tadiran TLM-1530MP cells as a power source. As a result of that testing, it was determined that those cells exhibit failure more often when shocked in the axial direction. No failures over many tests where found when the cells were shocked laterally. Moreover, when shocked laterally, the cells exhibited no observable degradation in performance. We looked at the failed cells via non-destructive x-ray analysis to determine what internal structures failed.

25 ENERGY STORAGE↗

WSEAT Shock Testing Margin Assessment Using Energy Spectra Final Report

Several programs at Sandia National Laboratories have adopted energy spectra as a metric to relate the severity of mechanical insults to structural capacity. The purpose being to gain insight into the system's capability, reliability, and to quantify the ultimate margin between the normal operating envelope and the likely system failure point -- a system margin assessment. The fundamental concern with the use of energy metrics was that the applicability domain and implementation details were not completely defined for many problems of interest. The goal of this WSEAT project was to examine that domain of applicability and work out the necessary implementation details. The goal of this project was to provide experimental validation for the energy spectra based methods in the context of margin assessment as they relate to shock environments. The extensive test results concluded that failure predictions using energy methods did not agree with failure predictions using S-N data. As a result, a modification to the energy methods was developed following the form of Basquin's equation to incorporate the power law exponent for fatigue damage. This update to the energy-based framework brings the energy based metrics into agreement with experimental data and historical S-N data.

47 OTHER INSTRUMENTATION↗