Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sidelobe Suppression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Vortex Beam Sidelobe Suppression via Bayliss Synthesis from a Rectangular Phased Array

We demonstrate the application of the Bayliss synthesis method for suppression of sidelobes in an OAM vortex beam, when generated by a commercial-of-the-shelf, rectangular phased array. The method is optimized for the current application and simulated for a 26.5 GHz signal in CST Microwave Studio. Sidelobes are notably reduced by 16.9 dB, with minimal reduction in gain and increase in beamwidth, as compared to a uniformed stimulated phased array. Further, the OAM modes are found to have greater purity that that of the uniformly stimulated array, as well as for other amplitude tapering methods. The Bayliss synthesis is then applied to a phased array in a test range, verifying the simulation results that demonstrate sidelobe suppression. These results indicate that OAM may be applied to existing phased arrays with minimal effort.

Orbital Angular Momentum (OAM)↗
NASA NTRSDate not supplied

Vortex Beam Sidelobe Suppression via Bayliss Synthesis from a Rectangular Phased Array

We demonstrate the application of the Bayliss synthesis method for suppression of sidelobes in an OAM vortex beam, when generated by a commercial-of-the-shelf, rectangular phased array. The method is optimized for the current application and simulated for a 26.5 GHz signal in CST Microwave Studio. Sidelobes are notably reduced by 16.9 dB, with minimal reduction in gain and increase in beamwidth, as compared to a uniformed stimulated phased array. Further, the OAM modes are found to have greater purity that that of the uniformly stimulated array, as well as for other amplitude tapering methods. The Bayliss synthesis is then applied to a phased array in a test range, verifying the simulation results that demonstrate sidelobe suppression. These results indicate that OAM may be applied to existing phased arrays with minimal effort.

Orbital Angular Momentum (OAM)↗
NASA NTRS1978

Effect of weighting on time sidelobe suppression

Weighting simulations in the time domain were considered to shape the time-compressed pulse waveform. The digital input radar data were 32 bit I,Q, and simulated data from a point target, imaged by a Seasat-A type system. Weighting functions tested include stepped-amplitude distributions, (with 1 through 5 steps), and the cosine-squared plus pedestal distribution. Effects treated include mainlobe ratio, signal to noise ratio, and nearest sidelobe suppression.

Dicenzo, A.↗
NASA NTRS1994

Suppression Of Range Sidelobes In Spaceborne Rain-Mapping Radar

Adequate suppression of range sidelobes in chirp pulse-compression radar system for spaceborne rain-mapping application demonstrated in operation of aircraft version of system. Radar system operates at center frequency of 13.8 GHz, developed for operation aboard NASA DC-8 aircraft to measure vertical rainfall-rate profiles and rain-cell dimensions. Sidelobes suppressed by at least 55 dB. Technique applied to other frequencies, therefore, useful in other radar systems in which low sidelobes at mid to far range needed.

Im, Eastwood↗
NASA NTRS1984

Accuracy of velocity and power determination by the Doppler method

When designing a Mesosphere-Stratosphere-Troposphere (MST) radar antenna one has to trade between the choices to optimize the effective aperture or to optimize the sidelobe suppression. An optimization of the aperture increases the sensitivity. Suppression of side-lobes by tapering attenuates undesirable signals which spoil the estimates of reflectivity and velocity. Generally, any sidelobe effects are equivalent to a broadening of the antenna beam. The return signal is due to a product of the antenna pattern with the varying atmospheric reflectivity structures. Thus, knowing the antenna pattern, it is in principle possible to find the signal spectra, which, however, may be a tedious computational and ambiguous procedure. For vertically pointing main beams the sidelobe effects are efficiently suppressed because of the aspect sensitivity. It follows that sidelobes are a minor problem for spaced antenna methods. However, they can be crucial for Doppler methods, which need off-vertical beams. If a sidelobe is pointing towards the zenith a larger power may be received from the vertical than off-vertical directions, but quantitative estimates of this effect are not yet known. To get an error estimate of sidelobe effects with an off-vertical main beam a 1-dimensional example is considered.

Rottger, J.↗
NASA NTRS1976

New sidelobe envelopes for small aperture earth stations

The advent of domestic satellite systems and technological improvements in both space and ground equipment makes the use of small aperture earth stations economically feasible and attractive for broadcast satellite applications. With increasing use of the orbit spectrum, there is some concern that broadcast satellite systems may not be able to obtain satisfactory allocations of this orbit-spectrum resource because of interference considerations. Specifically, interference calculations based on the present envelope result in comparatively large orbit spacings for broadcast satellites. Theoretical and experimental investigations of simple sidelobe suppression techniques, plus an analysis of experimental data on small aperture antennas, indicate that much better sidelobe performance can be obtained with a very small cost or performance penalty.

Janky, J. M.↗
NASA NTRS2002

Design of an Airborne L-Band Cross-Track Scanning Scatterometer

In this report, we describe the design of an airborne L-band cross-track scanning scatterometer suitable for airborne operation aboard the NASA P-3 aircraft. The scatterometer is being designed for joint operation with existing L-band radiometers developed by NASA for soil moisture and ocean salinity remote sensing. In addition, design tradeoffs for a space-based radar system have been considered, with particular attention given to antenna architectures suitable for sharing the antenna between the radar and radiometer. During this study, we investigated a number of imaging techniques, including the use of real and synthetic aperture processing in both the along track and cross-track dimensions. The architecture selected will permit a variety of beamforming algorithms to be implemented, although real aperture processing, with hardware beamforming, provides better sidelobe suppression than synthetic array processing and superior signal-to-noise performance. In our discussions with the staff of NASA GSFC, we arrived at an architecture that employs complete transmit/receive modules for each subarray. Amplitude and phase control at each of the transmit modules will allow a low-sidelobe transmit pattern to be generated over scan angles of +/- 50 degrees. Each receiver module will include all electronics necessary to downconvert the received signal to an IF offset of 30 MHz where it will be digitized for further processing.

Hilliard, Lawrence M.↗
NASA NTRS1977

Optimum constrained image restoration filters

The research described centered on development of an optimum image restoration filter (IRF) minimizing the radius of gyration of the corrected or composite system point-spread function (P-SF) subject to contraints, and reducing 2-dimensional spatial smearing or blurring of an image. The constraints are imposed on the radius of gyration of the IRF P-SF, the total restored image noise power, and the shape of the composite system frequency spectrum. The image degradation corresponds to mapping many points from the original image into a single resolution element. The P-SF is obtained as solution to a set of simultaneous differential equations obeying nonlinear integral constraints. Truncation errors due to edge effects are controlled by constraining the radius of gyration of the IRF P-SF. An iterative technique suppresses sidelobes of the composite system P-SF.

Riemer, T. E.↗
NASA NTRS1977

Absolute flux density calibrations of radio sources: 2.3 GHz

A detailed description of a NASA/JPL Deep Space Network program to improve S-band gain calibrations of large aperture antennas is reported. The program is considered unique in at least three ways; first, absolute gain calibrations of high quality suppressed-sidelobe dual mode horns first provide a high accuracy foundation to the foundation to the program. Second, a very careful transfer calibration technique using an artificial far-field coherent-wave source was used to accurately obtain the gain of one large (26 m) aperture. Third, using the calibrated large aperture directly, the absolute flux density of five selected galactic and extragalactic natural radio sources was determined with an absolute accuracy better than 2 percent, now quoted at the familiar 1 sigma confidence level. The follow-on considerations to apply these results to an operational network of ground antennas are discussed. It is concluded that absolute gain accuracies within + or - 0.30 to 0.40 db are possible, depending primarily on the repeatability (scatter) in the field data from Deep Space Network user stations.

Freiley, A. J.↗
NASA NTRS1984

Propagation and radiation of sound from flanged circular ducts with circumferentially varying wall admittances. I Semi-infinite ducts. II - Finite ducts with sources

Sound propagation in infinite, semiinfinite, and finite circular ducts with circumferentially varying wall admittances is investigated analytically. The infinite case is considered, and an example demonstrates the effects of wall-admittance distribution on dispersion characteristics and mode shapes. An exact solution is obtained for the semiinfinite case, a circular duct with a flanged opening: sidelobe suppression and circumferential-mode energy scattering leading to radiated-field asymmetry are found. A finite duct system with specified hard-walled pressure sources is examined in detail, evaluating reflection coefficients, transmission losses, and radiated-field directivity. Graphs and diagrams are provided, and the implications of the results obtained for the design of aircraft-turbofan inlet liners are discussed.

Fuller, C. R.↗
NASA NTRS1984

Configuration study for a 30 GHz monolithic receive array, volume 2

The formalism of the sidelobe suppression algorithm and the method used to calculate the system noise figure for a 30 GHz monolithic receive array are presented. Results of array element weight determination and performance studies of a Gregorian aperture image system are also given.

Nester, W. H.↗
NASA NTRS1984

A note on the proposed UK VHF radar

The proposal for the establishment of a VHF radar in the UK is still under active consideration, although for financial reasons no start has yet been made on an installation. Several changes have been made to the scheme as described and these are listed. (1) The initial installation will be suitable for stratosphere-troposphere (ST) operation only using 64 antennas and 2 power modules. (2) An existing site is being examined on the west coast of Wales, which because it is a former Loran ground station is provided with the buildings, power and communications facilities to enable a radar to be assembled much more quickly than a green field site would allow. Because the site is not within a mountain valley as originally intended, careful early attention will have to be given to the possible problems of local interference and sea-surface returns. (3) Preliminary discussions with the UK licensing authorities suggest that a frequency of 47 MHz is more likely than 50 MHz. (4) Minor changes are planned in the antenna array connection scheme of the 400-element mesosphere-stratosphere-troposphere (MST) array to allow more precise sidelobe suppression to be achieved in the receive mode.

Hall, A. J.↗
NASA NTRS1991

Microwave sensing technology issues related to a global change technology architecture trade study

The objectives are to enable the development of lighter and less power consuming, high resolution microwave sensors which will operate at frequencies from 1 to 200 GHz. These systems will use large aperture antenna systems (both reflector and phased arrays) capable of wide scan angle, high polarization purity, and utilize sidelobe suppression techniques as required. Essentially, the success of this technology program will enable high resolution microwave radiometers from geostationary orbit, lightweight and more efficient radar systems from low Earth orbit, and eliminate mechanical scanning methods to the fullest extent possible; a main source of platform instability in large space systems. The Global Change Technology Initiative (GCTI) will develop technology which will enable the use of satellite systems for Earth observations on a global scale.

Campbell, Thomas G.↗