Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sink efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Grain boundary strain as a determinant of localized sink efficiency

The opportunity to achieve radiation tolerance in crystalline materials hinges on understanding the structure and response of grain boundary sinks to irradiation. A common descriptor of grain boundary efficiency as a defect sink is the denuded zone, which is a defect free zone adjacent to the grain boundary dictated by its ability to absorb radiation induced defects. This descriptor is often used at the mesoscale, which requires an averaging of absorption events. In this paper, we resolve the defect sink efficiency as a function of interfacial strain with respect to grain boundary character, and correlate high levels of grain boundary strain to an enhanced absorption efficiency. Here, we also introduce a key relationship between localized strain in proximity with the grain boundary sink and the variation absorption efficiency associated with these regions, revealing the pitfalls of averaging absorption events along a grain boundary, and presenting a path forward toward improved models for denuded zones and localized grain boundary absorption phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Complex dislocation loop networks as natural extensions of the sink efficiency of saturated grain boundaries in irradiated metals

The development of radiation-tolerant structural materials is an essential element for the success of advanced nuclear energy concepts. A proven strategy to increase radiation resistance is to create microstructures with a high density of internal defect sinks, such as grain boundaries (GBs). However, as GBs absorb defects, they undergo internal transformations that limit their ability to capture defects indefinitely. Here, we show that, as the sink efficiency of GBs becomes exhausted with increasing irradiation dose, networks of irradiation loops form in the vicinity of saturated or near-saturated GB, maintaining and even increasing their capacity to continue absorbing defects. The formation of these networks fundamentally changes the driving force for defect absorption at GB, from “chemical” to “elastic.” Using thermally-activated dislocation dynamics simulations, we show that these networks are consistent with experimental measurements of defect densities near GB. Our results point to these networks as a natural continuation of the GB once they exhaust their internal defect absorption capacity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The mechanism behind the high radiation tolerance of Fe-Cr alloys

With the great demand for high radiation tolerant materials for advanced nuclear energy technologies, Fe-Cr alloys are at the forefront with long standing validated performance. Yet, the real mechanism behind their high radiation resistance is in question and understanding the effect of varying Cr percentage is a grand challenge limiting further improvements. Here we applied depth resolved atomic scale probe of defects to uncover the real mechanism on how Cr improves radiation resistance and explain the controversial impact of increasing Cr percentage. By combining depth-resolved positron annihilation lifetime spectroscopy and Doppler broadening spectroscopy we investigated the effect of Cr alloying on the formation and evolution of atomic size clusters induced by ion irradiation in Fe. We also used atom probe tomography to investigate the possible presence of Cr clusters or a’ phase with high Cr composition. The study reveals that the well-known resistance to radiation in Fe-Cr alloys arises from the stabilization of vacancy clusters around Cr atoms which act as sinks for radiation-induced defects. Thus, Cr atoms do not provide a direct sink for interstitials; rather defect complexes for that consist of Cr atoms and vacancies in turn act as sinks for irradiation-induced vacancies and interstitials. Most importantly, we find that lower amounts of Cr create smaller, uniformly distributed defect clusters that act as efficient sinks for radiation damage, but larger quantities of Cr form a defect structure that is less homogenous in size and spatial distribution, resulting in less efficient damage recombination. No evidence of phase a’ was found before or after irradiation, which indicates that it does not contribute to the observed radiation tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Using lifetime of point defects for dislocation bias in bcc Fe

The interaction between dislocations and point defects is key to deformation processes and microstructural evolution of structural materials. In this work, we compute the lifetime of point defects to describe their interaction with dislocations. This approach can accurately account for the effects of the dislocation core and anisotropic defect dynamics to accumulatively determine the capture efficiency, sink strength, and dislocation bias at different temperatures and dislocation densities. Particularly, the absorption of point defects by straight screw and edge dislocations in a model bcc iron system is studied. The maximum swelling rates based on the obtained bias factors are in close agreement with a variety of experimental measurements, including both neutron and ion-irradiation data, especially when considering the survival fraction for point defects from displacement cascades. Further, this approach applies to many other processes and sinks, such as dislocation loops and interfaces, providing a powerful means to develop fundamental insights critical for improving radiation resistance and mechanical properties of structural materials through controlling defect interaction and evolution.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Technical report Letter: RAFM, ODS steels and MMLC for Nuclear energy application

The lifetime, thermodynamic efficiency, safety and economic viability of new generation fission and fusion reactor concepts can largely be tied to the mechanical performance and stability of structural alloys under extreme environments. In this context, engineered nano materials could have broad-reaching impact on the future of advanced nuclear fuel-cycle and reactors. These systems are characterized by a large number density of interfaces which are efficient sinks for point defects and moderately biased; therefore limiting the deleterious effects of irradiation. Broadly, nuclear nano-technology deals with the use of the latest engineered-nanomaterials for improving the nuclear power performances and safety in all areas of nuclear energy production to bring new generations of nuclear power units. New advanced fuel assembly designs also have implications for securities and safeguards. To support the readiness for potential future license applications, an understanding of the technologies that would enable new reactor designs in the areas of component performance and domestic safeguards is necessary. This technical report letter work explores the technical issues and potential regulatory considerations associated with developing and adopting fuel claddings made of advanced nano- materials. Specifically three classes of nanomaterials are considered: (i) reduced activation ferritic/martensitic (RAFM) steels, (ii)oxide dispersed steels (ODS) and (iii) multi-metallic layered composites (MMLC).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that a GB’s efficiency as a sink is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Molecular dynamics study of grain boundaries as defect sinks under irradiation in LiAlO 2 and LiAl 5 O 8

Lithium aluminate ceramics, LiAlO 2 and LiAl 5 O 8 , show promise in nuclear environments due to their excellent radiation tolerance. Molecular dynamics simulations investigate grain boundaries (GB) and their role in defect evolution. Results reveal that GBs act as efficient defect sinks, with Li and Al atoms exhibiting distinct behaviors during displacement cascades. Tritium migration in LiAlO 2 is also studied, showing rapid diffusion and stable configurations with oxygen, corroborated by ab initio simulations from the literature. The calculated tritium diffusion coefficient of 1.33 × 10 - ¹⁴ m²/s aligns with the literature, validating the model. LiAl 5 O 8 demonstrates superior defect healing compared to LiAlO 2 , attributed to enhanced atomic transfer between grains and GBs. These findings reveal key insights into defect dynamics, providing essential insights for their application in tritium-producing burnable absorber rods (TPBARs).

36 MATERIALS SCIENCE↗
DOE OSTI2026

In situ study on radiation response of tungsten manufactured by laser powder bed fusion

Tungsten (W) produced by laser powder bed fusion (LPBF) was examined by in situ Krypton (Kr) ion irradiation at 400 °C up to 2.52 displacements per atom (dpa) to investigate its radiation response. Dislocation loops with identical Burgers vectors form aligned raft structures, inducing significant grain misorientation accumulation. Defect saturation was observed beyond 0.36 dpa, marked by constant loop density and raft spacing. WO 3 nanoparticles are found in the as-printed matrix and served as efficient defect sinks. Dislocation loops were absorbed at the W/WO 3 interface, facilitating defect annihilation and suppressing defect accumulation. In conclusion, these findings highlight the role of LPBF microstructure and oxide interfaces in mediating radiation-induced defect evolution, offering insights for designing radiation tolerant W-based materials.

Defect sink↗
DOE OSTI2020

Assessing microbial residues in soil as a potential carbon sink and moderator of carbon use efficiency

Abstract A longstanding assumption of glucose tracing experiments is that all glucose is microbially utilized during short incubations of ≤2 days to become microbial biomass or carbon dioxide. Carbon use efficiency (CUE) estimates have consequently ignored the formation of residues (non-living microbial products) although such materials could represent an important sink of glucose that is prone to stabilization as soil organic matter. We examined the dynamics of microbial residue formation from a short tracer experiment with frequent samplings over 72 h, and conducted a meta-analysis of previously published glucose tracing studies to assess the generality of these experimental results. Both our experiment and meta-analysis indicated 30–34% of amended glucose-C ( 13 C or 14 C) was in the form of residues within the first 6 h of substrate addition. We expand the conventional efficiency calculation to include residues in both the numerator and denominator of efficiency, thereby deriving a novel metric of the potential persistence of glucose-C in soil as living microbial biomass plus residues (‘carbon stabilization efficiency’). This new metric indicates nearly 40% of amended glucose-C persists in soil 180 days after amendment, the majority as non-biomass residues. Starting microbial biomass and clay content emerge as critical factors that positively promote such long term stabilization of labile C. Rapid residue production supports the conclusion that non-growth maintenance activity can illicit high demands for C in soil, perhaps equaling that directed towards growth, and that residues may have an underestimated role in the cycling and sequestration potential of C in soil.

Geyer, Kevin (ORCID:0000000252182745)↗
DOE OSTI2021

Capture efficiency and bias from the defect dynamics near grain boundaries in BCC Fe using mesoscale simulations

The capture efficiency describes the capability of a sink, such as a grain boundary (GB), dislocation, and void, to absorb point defects (PDs). The bias defines the difference in capture efficiency between the absorption of a vacancy and dumbbell at a sink. Complete kinetic information on PDs, including diffusion barriers and diffusion orientations, as well as accurate saddle points, are needed to determine the capture efficiency and bias at a sink accurately, which is computationally demanding. Here, in the present study, the Self-Evolving Atomistic Kinetic Monte Carlo (SEAKMC) method was used to investigate the defect dynamics of PDs near different types of grain boundaries (GBs) (with both $\langle$100$\rangle$ and $\langle$110$\rangle$ families) accurately in body-centered cubic (BCC) iron (Fe). The capture efficiency, sink strength, and bias factor of different types of GBs were determined in Fe, which, different from traditional rate theory estimation, showed a distinct capture efficiency, sink strength, and bias in different GBs. The results demonstrate a strong positive correlation between the capture efficiency and the GB strain width, instead of the GB misorientation, GB energy, or GB-PD binding energy, which have been investigated previously. This work provides valuable insight into the radiation-induced microstructural evolution of GBs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Surface Merging Technique to Design GA-Optimized Heat Sinks

High-power density inverters require efficient and small heat dissipation systems. For liquid cooling systems, an effective heat sink design is important to enable higher heat transfer and keep the pressure drop within reasonable limits. A heat sink geometry generated from an extruded, 1D fast Fourier transform can achieve more even temperature distribution and improved heat transfer than a conventional heat sink. Building on this concept, this paper proposes a new heat sink geometry creation algorithm. Instead of one plane profile being extruded, multiple plane profiles, each created from the fast Fourier transform method, are subsequently merged by smooth surfaces along the flow direction of the heat sink. Thus, a 3D heat sink geometry is created that enables 3D coolant flow and efficient heat transfer. The volume of this design was reduced by 50% compared with pin fin heat sinks. Compared with extruded 1D fast Fourier transform heat sinks, the proposed design showed an approximately 5% device temperature reduction and a 20% pressure drop reduction.

Barua, Himel↗
DOE OSTI2022

Dynamic optimization with flexible heat integration of a solar parabolic trough collector plant with thermal energy storage used for industrial process heat

There is an increasing need to reduce fossil fuel consumption used for industrial process heat to slow the effects of climate change. Using solar thermal heat is a viable way to replace fossil fuel use, but solar industrial process heat plants have limited implementation due to large upfront costs and inefficiencies from the inherent variability from solar energy. Having more flexible and optimized control over these plants can enable them to be more efficient. Here in this work, a solar industrial process heat plant with thermal energy storage that can flexibly collect and deliver heat to two industrial processes (flexible heat integration) is dynamically modeled with control setpoints found by a dynamic optimization method. The optimized case can increase the solar efficiency of the plant by 7.5% on average relative to a base case. The results show that it is best to collect heat at lower temperatures for all but ideal solar conditions, only medium to high quality heat should be stored in large quantities, and exchanging heat with a lower temperature heat sink is generally more efficient. The optimized case is able to reduce the levelized cost of heat of the plant to $31.83/MWh th compared to a base case value of $34.10/MWh th . The optimized case can reduce emissions by 22.2% compared to a plant which uses only natural gas. This work shows that dynamic optimization with flexible heat integration can be a cost-effective way to increase efficiency so that more of these types of plants can be implemented.

14 SOLAR ENERGY↗
DOE OSTI2026

Quantifying atmospheric carbon removal at pulp and paper mills: a life cycle assessment across system boundaries

The pulp and paper industry is a promising yet underexplored platform for large-scale carbon dioxide removal (CDR) due to its use of biogenic feedstocks and production of concentrated CO 2 emissions from point sources. This study presents the first comprehensive life cycle assessment (LCA) of retrofitting an amine-based carbon capture and storage (CCS) system into a representative virgin kraft pulp and paper mill in the Southeastern U.S. We evaluate carbon removal across five system configurations, applying both static and dynamic LCA methods under multiple functional units: CO 2 captured, biomass input, and paper output. Results show that CCS retrofits can convert a conventional mill from a net emitter into a net carbon sink, with total removal efficiencies from 17% to 92% (metric tonnes of CO 2 removed per metric tonne of CO 2 available for removal under selected boundary conditions). When carbon removal is normalized to the quantity of biogenic CO 2 captured—a narrow, gate-to-gate system boundary that considers only CCS facility emissions—removal efficiencies reached as high as 92%. The use of such narrow boundaries aligns with precedents in traditional LCA methodology, where gate-to-gate assessments are commonly applied to isolate process-level performance and allocate emissions accordingly, providing a consistent basis for comparison across technologies. Under broader cradle-to-grave boundaries—which begin tracking carbon at the point of its physical removal from the atmosphere via photosynthesis in the forest, and extend to include upstream forest operations, mill-wide emissions, and downstream product decomposition—efficiencies declined, ranging from 17% to 46% under static assumptions and dropping to 12% when accounting for dynamic biogenic carbon fluxes over time. These results underscore how system boundary definitions influence reported outcomes, while also illustrating the complementary roles of narrow and broad perspectives for different decision-making contexts.

09 BIOMASS FUELS↗
DOE OSTI2025

Design, fabrication, simulation, and testing of additively manufactured lattice-based copper heat sinks

Here, this study investigates the potential advantages of lattice structure-based bound metal material extrusion (MEX) 3D printing for fabricating high-performance copper heat sinks. Copper powder-filled polymer filaments, with a copper content of > 90 wt.%, were developed specifically for the bound metal MEX 3D printing process. Three types of structures—planar, strut, and surface lattices—were 3D printed to facilitate efficient heat transfer pathways within the heat sinks. Subsequent post-processing steps, including polymer removal and sintering, were performed to achieve dense copper parts. Hot isostatic pressing was further employed to enhance the sintered density from 93 to 98%. Finite element analysis (FEA) simulations were conducted to assess the heat transfer efficiency of the designs, and heat transfer experiments were performed using a custom setup to validate the simulation results. Additionally, this research explores the use of extended hold times during pre-sintering and a reduced atmosphere to enhance the %IACS values (electrical conductivity) and thermal performance of the bound metal MEX 3D printed copper heat sinks. The investigation combines experimental analysis, including simulations and heat transfer experiments, to gain insights into the structure-material property relationships and optimize the thermal performance of the printed heat sinks.

Ajjarapu, Kameswara Pavan Kumar [Oak Ridge Nationa↗
DOE OSTI2022

Cost-efficient copper-nickel alloy for active cooling applications

It is recently proposed that active (Peltier) and passive (conductive) cooling could be combined to design highly-efficient thermal conductors as active heat sinks. Here we study the potential of low-cost copper-nickel alloys for active cooling applications. We show that for this application, copper-nickel alloys prepared using industrial-grade powders to lower the manufacturing cost, are as good as copper-nickel alloys made out of high purity metals. Furthermore, directed energy deposition, a type of additive manufacturing, can produce copper-nickel alloys which have about 10 percent lower thermoelectric power factor compared to mechanical-alloying methods but have larger thermal conductivity values, hence, possessing similar effective thermal conductivity values, reaching 403 W m -1 K -1 at 390K. Much larger values are expected at higher temperatures. The usage of additive manufacturing enables complex geometries and large-scale production.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reviving the carbon sink: The influence of moderate wind disturbance in a secondary temperate mixed forest

Global forests are increasingly exposed to climate-driven perturbations, which may in turn alter their climate mitigation potential. As tropical cyclones expand poleward due to climate warming, wind disturbances in temperate forests have become increasingly frequent. The consequences of moderate wind disturbances remain poorly understood, hindering efforts to quantify their role in the global carbon cycle. Here, we used 16 years of continuous eddy covariance and biometric measurements to investigate the impacts of moderate wind disturbances on the structure and carbon sink dynamics of a temperate forest in Northeast China. Following Typhoon Maysak in 2020, the mortality of large trees (particularly the aging pioneer species) increased ninefold, whereas that of small trees decreased by nearly half. Both stand basal area and leaf area index were reduced between 2019 and 2023, with aging pioneer tree species being more vulnerable than mid-to-late species to wind disturbances. Shifts in species composition altered the environmental sensitivity of forest carbon sink function. Unexpectedly, wind disturbances reversed the declining trends in net ecosystem production and ecosystem carbon use efficiency of this secondary forest. A novel composite structural indicator—the standardized leaf area index (the maximum leaf area supported by per basal area of the stand)—provided robust predictions (R 2 > 0.4) of carbon sink dynamics throughout the study period. The selective removal of less efficient pioneer trees accelerated succession and reversed the aging-related decline in forest carbon sink strength and carbon use efficiency. In conclusion, these findings highlight the potential role of moderate wind disturbances in enhancing forest carbon sink function and offer a framework for understanding, assessing, and predicting forest carbon dynamics under increasing disturbance frequencies driven by climate change.

Carbon sink↗
DOE OSTI2022

Compartment-specific energy requirements of photosynthetic carbon metabolism in Camelina sativa leaves

Abstract Main conclusion The oxidative pentose phosphate pathway provides cytosolic NADPH yet reduces carbon and energy use efficiency. Repressing this pathway and introducing cytosolic NADPH-dependent malate dehydrogenase may increase crop yields by ≈5%. Abstract Detailed knowledge about plant energy metabolism may aid crop improvements. Using published estimates of flux through central carbon metabolism, we phenotype energy metabolism in illuminated Camelina sativa leaves (grown at 22 °C, 500 µmol photons m −2 s −1 ) and report several findings. First, the oxidative pentose phosphate pathway (OPPP) transfers 3.3% of the NADPH consumed in the Calvin–Benson cycle to the cytosol. NADPH supply proceeds at about 10% of the rate of net carbon assimilation. However, concomitantly respired CO 2 accounts for 4.8% of total rubisco activity. Hence, 4.8% of the flux through the Calvin–Benson cycle and photorespiration is spent on supplying cytosolic NADPH, a significant investment. Associated energy requirements exceed the energy output of the OPPP. Thus, autotrophic carbon metabolism is not simply optimised for flux into carbon sinks but sacrifices carbon and energy use efficiency to support cytosolic energy metabolism. To reduce these costs, we suggest bioengineering plants with a repressed cytosolic OPPP, and an inserted cytosolic NADPH-dependent malate dehydrogenase tuned to compensate for the loss in OPPP activity (if required). Second, sucrose cycling is a minor investment in overall leaf energy metabolism but a significant investment in cytosolic energy metabolism. Third, leaf energy balancing strictly requires oxidative phosphorylation, cofactor export from chloroplasts, and peroxisomal NADH import. Fourth, mitochondria are energetically self-sufficient. Fifth, carbon metabolism has an ATP/NADPH demand ratio of 1.52 which is met if ≤ 21.7% of whole electron flux is cyclic. Sixth, electron transport has a photon use efficiency of ≥ 62%. Last, we discuss interactions between the OPPP and the cytosolic oxidation–reduction cycle in supplying leaf cytosolic NADPH.

59 BASIC BIOLOGICAL SCIENCES↗