SEARCH · Search NASA

Results for “Small Satellite Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Beacon-based precision navigation and timing (PNT) system

Beacon-based Precision Navigation and Timing (PNT) may use a constellation of space vehicles (e.g., small, low cost satellites) coupled to a network of ground stations and a network of beacons. Such a system be provided at a cost that is approximately 100 times lower than GPS both to build and to operate. The resulting system may also provide fast acquisition, improved SNR, improved anti-jam and anti-spoofing capabilities, and six-inch scale location determination, making it applicable to both existing PNT applications and enabling new applications.

Judd, Stephen↗

DOE OSTI2026

Auriga Streams III: the mass–metallicity relation does not rule out tidal mass-loss in Local Group satellites

The mass–metallicity relation is a fundamental galaxy scaling law that has been extended to the faintest systems in the Local Group. We show that the small scatter in this relation, which has been used to argue against tidal mass-loss in Local Group satellites, is consistent with the level of disruption in the Auriga simulations. For every accreted system in Auriga, we compute stellar masses and metallicities two ways: considering the total system (bound + lost material) and only considering the progenitor. Accreted systems in Auriga have a tight relation between total stellar mass and metallicity, with scatter at a fixed stellar mass driven by age. When only considering the progenitor, the tidally evolved mass–metallicity relation has similar scatter (⁠~0.27 dex) as observed for the Local Group satellites (⁠~0.23 dex). Satellites that lie above the evolved relation have experienced substantial mass-loss and typically have low metallicity for their total stellar mass. Even satellites that fall exactly on the evolved relation can lose over half of their stellar mass. Only satellites substantially below the evolved relation are reliably intact. Based on their offset from the observed relation, we predict which Milky Way and M31 satellites have tidal tails waiting to be discovered.

Galaxy: halo↗

DOE OSTI2022

Remote sensing from unoccupied aerial systems: Opportunities to enhance Arctic plant ecology in a changing climate

The Arctic is warming at a faster rate than any other biome on Earth, resulting in widespread changes in vegetation composition, structure, and function that have important feedbacks to the global climate system. The heterogeneous nature of arctic landscapes creates challenges for monitoring and improving understanding of these ecosystems, as current efforts typically rely on ground, airborne, or satellite-based observations that are limited in space, time, or pixel resolution. The use of remote sensing instruments on small Unoccupied Aerial Systems (UASs) has emerged as an important tool to bridge the gap between detailed, but spatially limited ground-level measurements, and lower resolution, but spatially extensive high-altitude airborne and satellite observations. UASs allow researchers to view, describe and quantify vegetation dynamics at fine spatial scales (1-10 cm) over areas much larger than typical field plots. UASs can be deployed with a high degree of temporal flexibility, enabling observation across diurnal, seasonal, and annual timescales. In this work, we review how established and emerging UAS remote sensing technologies can enhance arctic plant ecological research by quantifying fine-scale vegetation patterns and processes, and by enhancing the ability to link ground-based measurements with broader-scale information obtained from airborne and satellite platforms. Synthesis: Improved ecological understanding and model representation of arctic vegetation is needed to forecast the fate of the Arctic in a rapidly changing climate. Observations from UASs provide an approach to address this need, however, the use of this technology in the Arctic currently remains limited. Here we share recommendations to better enable and encourage the use of UASs to improve the description, scaling, and model representation of arctic vegetation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

High Precision, High Frequency Printed Antennas

An emerging trend in advanced manufacturing is printed electronics and sensors. The ability to print customized electronics and sensors integrated into functional packages is a growing need within a variety of growing markets such as smart manufacturing, internet of things (IoT), and the small satellite industry. Both Oak Ridge National Laboratory (ORNL) and the MITRE Corporation have seedling research efforts evaluating the potential for future printed electronic systems. High frequency, wide-bandwidth phased array antennas (i.e. >45 GHz) open the door to new applications. However, such sensors require currently prohibitively small feature sizes for commercial 3D printing technologies along with increasing challenges with connecting the driving electronics to such features. An additional finding with related advanced manufacturing challenges is the rapid production of 3D additive connectors for integration with commercial printed circuit boards (PCBs), primarily for advanced in-circuit inspection techniques. This work is developing additive manufacturing processes for producing connected and conductive fine scale 3D features. The primary focus was on aerosol-jet printing (AJP), which has a small minimum resolution (<50 µm) but is traditionally printed flat with small height/width aspect ratios <<1, and developing controls to enable fully 3D, high aspect ratio, and unsupported features. In Phase 1 of this effort, baselines of process performance were characterized, and test coupons produced for both ultra-high frequency antennas and microstructures to support reverse engineering of PCBs. In Phase 2, these efforts will be extended for system demonstration of ultra-high frequency antenna arrays, as well as reverse engineering circuitry for dense PCBs.

42 ENGINEERING↗

DOE OSTI2022

Emulation Modeling for Development of Cyber-Defense Capabilities for Satellite Systems

The objective of this project was to develop a novel capability to generate synthetic data sets for the purpose of training Machine Learning (ML) algorithms for the detection of malicious activities on satellite systems. The approach experimented with was to a) generate sparse data sets using emulation modeling and b) enlarge the sparse data using Generative Adversarial Networks (GANs). We based our emulation modeling on the Open Source NASA Operational Simulator for Small Satellites (NOS3) developed by the Katherine Johnson Independent Verification and Validation (IV&V) program in West Virginia. Significant new capabilities on NOS3 had to be developed for our data set generation needs. To expand these data sets for the purpose of training ML, we experimented with a) Extreme Learning Machines (ELMs) and b) Wasserstein-GANs (WGAN-GP).

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2025

The NGC 3109 Satellite System: The First Systematic Resolved Search for Dwarf Galaxies Around an SMC-mass Host

We report the results of the deepest search to date for dwarf galaxies around NGC 3109, a barred spiral galaxy with a mass similar to that of the Small Magellanic Cloud (SMC), using a semiautomated search method. Using the Dark Energy Camera, we survey a region covering a projected distance of ∼70 kpc of NGC 3109 (D = 1.3 Mpc, R vir ∼ 90 kpc, M ∼ 10 8 M*) as part of the MADCASH and DELVE-DEEP programs. We introduce a newly developed semiresolved search method, used alongside a resolved search, to identify crowded dwarf galaxies around NGC 3109. Using both approaches, we successfully recover the known satellites Antlia and Antlia B. We identified a promising candidate, which was later confirmed to be a background dwarf through deep follow-up observations. Our detection limits are well defined, with the sample ∼80% complete down to M V ∼ −8.0, and include detections of dwarf galaxies as faint as M V ∼ −6.0. This is the first comprehensive study of a satellite system through resolved stars around an SMC mass host. Our results show that NGC 3109 has more bright (M V ∼ −9.0) satellites than the mean predictions from cold dark matter models, but well within the host-to-host scatter. A larger sample of LMC/SMC-mass hosts is needed to test whether or not the observations are consistent with current model expectations.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Constraints on the Gamma-Ray Emission from Small Solar System Bodies with the Fermi Large Area Telescope Data

All known small solar system bodies have diameters between a few meters and a few thousands of kilometers. Based on the collisional evolution of solar system bodies, a larger number of asteroids with diameters down to ~2 m is thought to exist. As all solar system bodies, small bodies can be passive sources of high-energy gamma-rays, produced by the interaction of energetic cosmic rays impinging on their surfaces. Since the majority of known asteroids are in orbits between Mars and Jupiter (in a region known as the Main Belt), we expect them to produce a diffuse emission close to the ecliptic plane. In this work, we have studied the gamma-ray emission coming from the ecliptic using the data collected by the Large Area Telescope (LAT) onboard the Fermi satellite. We have fit the results with simulations of the gamma-ray intensity at the source level (calculated with the software FLUKA) to constrain the small solar system bodies population. Finally, we have proposed a model describing the distribution of asteroid sizes and we have used the LAT data to constrain the gamma-ray emission expected from this model and, in turn, on the model itself.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Evaluating the state-of-the-art in remote volcanic eruption characterization Part I: Raikoke volcano, Kuril Islands

Raikoke, a small, unmonitored volcano in the Kuril Islands, erupted in June 2019. We integrate data from satellites (including Sentinel-2, TROPOMI, MODIS, Himawari-8), the International Monitoring System (IMS) infrasound network, and global lightning detection network (GLD360) with information from local authorities and social media to retrospectively characterize the eruptive sequence and improve understanding of the pre-, syn- and post- eruptive behavior. In this work, we observe six infrasound pulses beginning on 21 June at 17:49:55 UTC as well as the main Plinian phase on 21 June at 22:29 UTC. Each pulse is tracked in space and time using lightning and satellite imagery as the plumes drift eastward. Post-eruption visible satellite imagery shows expansion of the island's surface area, an increase in crater size, and a possibly-linked algal bloom south of the island. We use thermal satellite imagery and plume modeling to estimate plume height at 10–12 km asl and 1.5–2 × 10 6 kg/s mass eruption rate. Remote infrasound data provide insight into syn-eruptive changes in eruption intensity. Our analysis illustrates the value of interdisciplinary analyses of remote data to illuminate eruptive processes. However, our inability to identify deformation, pre-eruptive outgassing, and thermal signals, which may reflect the relatively short duration (~12 h) of the eruption and minimal land area around the volcano and/or the character of closed-system eruptions, highlights current limitations in the application of remote sensing for eruption detection and characterization.

58 GEOSCIENCES↗

DOE OSTI2024

Achievement of the Planetary Defense Investigations of the Double Asteroid Redirection Test (DART) Mission

NASA's Double Asteroid Redirection Test (DART) mission was the first to demonstrate asteroid deflection, and the mission's Level 1 requirements guided its planetary defense investigations. Here, we summarize DART's achievement of those requirements. On 2022 September 26, the DART spacecraft impacted Dimorphos, the secondary member of the Didymos near-Earth asteroid binary system, demonstrating an autonomously navigated kinetic impact into an asteroid with limited prior knowledge for planetary defense. Months of subsequent Earth-based observations showed that the binary orbital period was changed by –33.24 minutes, with two independent analysis methods each reporting a 1 σ uncertainty of 1.4 s. Dynamical models determined that the momentum enhancement factor, β , resulting from DART's kinetic impact test is between 2.4 and 4.9, depending on the mass of Dimorphos, which remains the largest source of uncertainty. Over five dozen telescopes across the globe and in space, along with the Light Italian CubeSat for Imaging of Asteroids, have contributed to DART's investigations. These combined investigations have addressed topics related to the ejecta, dynamics, impact event, and properties of both asteroids in the binary system. A year following DART's successful impact into Dimorphos, the mission has achieved its planetary defense requirements, although work to further understand DART's kinetic impact test and the Didymos system will continue. In particular, ESA's Hera mission is planned to perform extensive measurements in 2027 during its rendezvous with the Didymos–Dimorphos system, building on DART to advance our knowledge and continue the ongoing international collaboration for planetary defense.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Regional Oil and gas Aerial Methane Synthesis model (ROAMS) v2.0

The Regional Oil and gas Aerial Methane Synthesis model is a tool to convert the results of wide-area, source-resolved aerial methane remote sensing surveys of oil and natural gas infrastructure in a given region into methane emissions inventories (estimates of the magnitude and breakdown of methane emissions from the surveyed infrastructure). The tool leverages databases of source-resolved methane emissions detected in aerial surveys, aerial survey coverage information (which areas were measured and when), data summarizing surveyed oil and natural gas infrastructure and production (derived from third-party databases), as well as state-of-the-art mechanistic emissions simulation tools to characterize emissions too small for the aerial system to see. The regional methane emissions estimates produced by this tool are much more granular in both space and asset type than common satellite- or flux tower-based regional estimates. Unlike other tools for converting site-level measurements into regional emissions estimates, our unique geostatistical approach integrates aerially measured emissions with limited need for statistical extrapolation, which can be highly sensitive to modeler assumptions. As a result, ROAMS-based estimates of regional methane emissions from oil and gas activity are widely viewed as highly credible, as evidenced by the success of Dr. Sherwin's recent paper in Nature.

Sherwin, Evan [Lawrence Berkeley National Laborato↗

DOE OSTI2025

Regional Oil and gas Aerial Methane Synthesis model (Analytica) (ROAMS Analytica) v1.5.2

The Regional Oil and gas Aerial Methane Synthesis model (Analytica) is a tool to convert the results of wide-area, source-resolved aerial methane remote sensing surveys of oil and natural gas infrastructure in a given region into methane emissions inventories (estimates of the magnitude and breakdown of methane emissions from the surveyed infrastructure). This version is written in the Analytica programming language, and this version accompanies a correction in preparation for submission to Sherwin et al. 2024 (Nature). The tool leverages databases of source-resolved methane emissions detected in aerial surveys, aerial survey coverage information (which areas were measured and when), data summarizing surveyed oil and natural gas infrastructure and production (derived from third-party databases), as well as state-of-the-art mechanistic emissions simulation tools to characterize emissions too small for the aerial system to see. The regional methane emissions estimates produced by this tool are much more granular in both space and asset type than common satellite- or flux tower-based regional estimates. Unlike other tools for converting site-level measurements into regional emissions estimates, our unique geostatistical approach integrates aerially measured emissions with limited need for statistical extrapolation, which can be highly sensitive to modeler assumptions. As a result, ROAMS-based estimates of regional methane emissions from oil and gas activity are widely viewed as highly credible, as evidenced by the success of Dr. Sherwin's recent paper in Nature.

Sherwin, Evan [Lawrence Berkeley National Laborato↗

DOE OSTI2020

The Utility of Satellites and Autonomous Remote Sensing Platforms for Monitoring Offshore Aquaculture Farms: A Case Study for Canopy Forming Kelps

The emerging sector of offshore kelp aquaculture represents an opportunity to produce biofuel feedstock to help meet growing energy demand. Giant kelp represents an attractive aquaculture crop due to its rapid growth and production, however precision farming over large scales is required to make this crop economically viable. These demands necessitate high frequency monitoring to ensure outplant success, maximum production, and optimum quality of harvested biomass, while the long distance from shore and large necessary scales of production makes in person monitoring impractical. Remote sensing offers a practical monitoring solution and nascent imaging technologies could be leveraged to provide daily products of the kelp canopy and subsurface structures over unprecedented spatial scales. Here, we evaluate the efficacy of remote sensing from satellites and aerial and underwater autonomous vehicles as potential monitoring platforms for offshore kelp aquaculture farms. Decadal-scale analyses of the Southern California Bight showed that high offshore summertime cloud cover restricts the ability of satellite sensors to provide high frequency direct monitoring of these farms. By contrast, daily monitoring of offshore farms using sensors mounted to aerial and underwater drones seems promising. Small Unoccupied Aircraft Systems (sUAS) carrying lightweight optical sensors can provide estimates of canopy area, density, and tissue nitrogen content on the time and space scales necessary for observing changes in this highly dynamic species. Underwater color imagery can be rapidly classified using deep learning models to identify kelp outplants on a longline farm and high acoustic returns of kelp pneumatocysts from side scan sonar imagery signal an ability to monitor the subsurface development of kelp fronds. Current sensing technologies can be used to develop additional machine learning and spectral algorithms to monitor outplant health and canopy macromolecular content, however future developments in vehicle and infrastructure technologies are necessary to reduce costs and transcend operational limitations for continuous deployment in an offshore setting.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Real-time coupled-cluster approach for the cumulant Green's function

Green’s function methods within many-body perturbation theory provide a general framework for treating electronic correlations in excited states. Here we investigate the cumulant form of the one-electron Green’s function based on the coupled-cluster equation of motion approach in an extension of our previous study. The approach yields a non-perturbative expression for the cumulant in terms of the solution to a set of coupled first order, non-linear differential equations. The method thereby adds non-linear corrections to traditional cumulant methods linear in the self energy. The approach is applied to the core-hole Green’s function and illustrated for a number of small molecular systems. For these systems we find that the non-linear contributions lead to significant improvements both for quasiparticle properties such as core-level binding energies, as well as the satellites corresponding to inelastic losses observed in photoemission spectra.

Vila, Fernando D.↗

DOE OSTI2021

An Overview of Atmospheric Features Over the Western North Atlantic Ocean and North American East Coast—Part 2: Circulation, Boundary Layer, and Clouds

The Western North Atlantic Ocean (WNAO) is a complex land-ocean-atmosphere system that experiences a wide range of atmospheric phenomena, which in turn drive unique aerosol transport pathways, cloud morphologies, and boundary layer variability. This work, Part 2 of a 2-part paper series, provides an overview of the atmospheric circulation, boundary layer variability, three-dimensional cloud structure, and precipitation over the WNAO; the companion paper (Part 1) focused on chemical characterization of aerosol, gas, and wet deposition. Seasonal changes in the circulation and sea surface temperature explain a clear transition in cloud morphologies from small shallow cumulus clouds, convective clouds, and tropical storms in summer, to stratus/stratocumulus and multi-layer cloud systems associated with winter storms. Synoptic variability in cloud fields is estimated using satellite-based weather states, and the role of postfrontal conditions (cold-air outbreaks) in the development of stratiform clouds is further analyzed. Precipitation is persistent over the ocean, with a regional peak over the Gulf Stream path, where offshore sea surface temperature gradients are large and surface fluxes reach a regional peak. Satellite data show a clear annual cycle in cloud droplet number concentration along the coast in winter, and minima in summer, suggesting a marked annual cycle in aerosol-cloud interactions. The performance of four climate models are assessed against satellite cloud retrievals. The models qualitatively reproduce the annual cycle in cloud cover and liquid water path, but with large discrepancies across models, especially in the extra-tropics. The paper concludes with a summary of outstanding issues and recommendations for future work.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Fast Data Processing for Hyperspectral Sensors on Small Platforms

Hyperspectral imaging is a very promising technology for nuclear proliferation detection. However, due to size and weight restrictions, small hyperspectral platforms such as satellites and small drones lack the on-board computing resources for accurate, real-time analysis of the enormous flow of data that a continuously operating hyperspectral sensor generates. This severely limits satellite systems, which can collect far more data than what they can telemeter, and hinders the ability of all platforms to adapt their missions on the fly in response to observations. This program addresses the hyperspectral data processing challenge through development of new, fast and accurate algorithms that produce data products in real time. The algorithms circumvent the major computational bottlenecks in existing processing streams, and would be incorporated in lightweight, power-efficient single-board computer systems. The toolkit of fast algorithms will be immediately useful in current and future hyperspectral systems being built by the Government and by private industry, including drone-based systems and satellite constellations that acquire timely global imagery.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2022

Local Group timing argument and virial theorem mass estimators from cosmological simulations

ABSTRACT We identify Local Group (LG) analogues in the IllustrisTNG cosmological simulation, and use these to study two-mass estimators for the LG: One based on the timing argument (TA) and one based on the virial theorem (VT). Including updated measurements of the Milky Way-M31 tangential velocity and the cosmological constant, we show that the TA mass estimator slightly overestimates the true median LG-mass, though the ratio of the TA to the true mass is consistent at the approximate 90 per cent c.l.. These are in broad agreement with previous results using dark matter-only simulations. We show that the VT estimator better estimates the true LG-mass, though there is a larger scatter in the virial mass to true mass ratio relative to the corresponding ratio for the TA. We attribute the broader scatter in the VT estimator to several factors, including the predominantly radial orbits for LG satellite galaxies, which differs from the VT assumption of isotropic orbits. With the systematic uncertainties we derive, the updated measurements of the LG mass at 90 per cent c.l. are $4.75_{-2.41}^{+2.22} \times 10^{12}$ M⊙ from the TA and $2.0_{-1.5}^{+2.1} \times 10^{12}$ M⊙ from the VT. We consider the LMC’s effect on the TA and VT LG mass estimates, and do not find exact LMC–MW–M31 analogues in the Illustris simulations. However, in LG simulations with satellite companions as massive as the LMC, we find that the effect on the TA and VT estimators is small, though we need further studies on a larger sample of LMC–MW–M31 systems to confirm these results.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Mechanical Design Progress of the In Situ Nanoprobe Instrument for APS-U

The In Situ Nanoprobe (ISN, 19-ID) beamline will be a new best-in-class long beamline to be constructed as part of the Advanced Photon Source Upgrade (APS-U) project [1, 2]. To achieve long working distance at high spatial resolution, the ISN instrument will be positioned 210 m downstream of the x-ray source, in a dedicated satellite building, currently under construction [3]. The ISN instrument will use a nano-focusing Kirkpatrick-Baez (K-B) mirror system, which will focus hard x-rays to a focal spot as small as 20 nm, with a large working distance of 61 mm. The large working distance provides space for various in situ sample cells for x-ray fluorescence tomography and ptychographic 3D imaging, allows the use of a separate, independent vacuum chambers for the optics and sample, and provides the flexibility to run experiments in vacuum or at ambient pressure. A consequence of the small spot size and large working distance are stringent requirements for high angular stability of the K-B mirrors (5 nrad V-mirror and 16 nrad H-mirror) and high relative stability be-tween focus spot and sample (4 nmRMS). Additional features include fly-scanning up to 2 kg mass, sample plus in situ cell, at 1 mm/s in vertical and/or horizontal directions over an area of 10 mm x 10 mm. Environmental capabili-ties will include heating and cooling, flow of fluids and applied fields, as required for electrochemistry and flow of gases at high temperature for catalysis. To achieve these capabilities and precise requirements we have used precision engineering fundamentals to guide the design process.

Kearney, Steven P.↗

DOE OSTI2021

Cubesat system

Small cubesat systems may be available for a lower cost, have a higher reliability, and be much simpler to use than conventional cubesats. A complete turnkey system solution may be provided, including the ground station and remote field units. The satellite, ground station, and field unit may be provided separately as kits that are ready to go out-of-the-box as soon as they arrive. This enables universities, researchers, and hobbyists to obtain and deploy their own functional satellites. Furthermore, theoretical designs and functionality may be rapidly prototyped and demonstrated, which allows for proof-of-concept without needing to build a larger, more expensive satellite system and hope that the new design or functionality works as intended.

Judd, Stephen↗