Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spectral simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Simulator spectral characterization using balloon calibrated solar cells with narrow band pass filters

The development and implementation of an instrument for spectral measurement of solar simulators for testing solar cell characteristics is reported. The device was constructed for detecting changes in solar simulator behavior and for comparing simulator spectral irradiance to solar AM0 output. It consists of a standard solar cell equipped with a band pass filter narrow enough so that, when flown on a balloon to sufficient altitude along with sufficient numbers of cells, each equipped with filters of different bandpass ratings, the entire spectral response of the standard cell can be determined. Measured short circuit currents from the balloon flights thus produce cell devices which, when exposed to solar simulator light, have a current which does or does not respond as observed under actual AM0 conditions. Improvements of the filtered cells in terms of finer bandpass filter tuning and measurement of temperature coefficients are indicated.

Goodelle, G. S.↗
NASA NTRS1990

Spectral simulation of unsteady compressible flow past a circular cylinder

An unsteady compressible viscous wake flow past a circular cylinder was successfully simulated using spectral methods. A new approach in using the Chebyshev collocation method for periodic problems is introduced. It was further proved that the eigenvalues associated with the differentiation matrix are purely imaginary, reflecting the periodicity of the problem. It was been shown that the solution of a model problem has exponential growth in time if improper boundary conditions are used. A characteristic boundary condition, which is based on the characteristics of the Euler equations of gas dynamics, was derived for the spectral code. The primary vortex shedding frequency computed agrees well with the results in the literature for Mach = 0.4, Re = 80. No secondary frequency is observed in the power spectrum analysis of the pressure data.

Don, Wai-Sun↗
NASA NTRS1991

Spectral simulations of reacting turbulent flows

Spectral methods for simulating flows are reviewed, emphasizing their recent applications to reacting flow problems. Various classifications of spectral methods and their convergence properties are described and the 'spectral element' method is presented, highlighting its flexibility in dealing with complex flow geometries. The applications considered include chemical reactions in homogeneous turbulence, temporally evolving mixing layers, variable-density simulations, nonequilibrium chemistry, and spatially evolving mixing layers.

Mcmurtry, Patrick A.↗
NASA NTRS1982

Spatial and spectral simulation of LANDSAT images of agricultural areas

A LANDSAT scene simulation capability was developed to study the effects of small fields and misregistration on LANDSAT-based crop proportion estimation procedures. The simulation employs a pattern of ground polygons each with a crop ID, planting date, and scale factor. Historical greenness/brightness crop development profiles generate the mean signal values for each polygon. Historical within-field covariances add texture to pixels in each polygon. The planting dates and scale factors create between-field/within-crop variation. Between field and crop variation is achieved by the above and crop profile differences. The LANDSAT point spread function is used to add correlation between nearby pixels. The next effect of the point spread function is to blur the image. Mixed pixels and misregistration are also simulated.

Pont, W. F., Jr.↗
NASA NTRS1982

Spatial and spectral simulation of Landsat images of agricultural areas

A Landsat scene simulation capability was developed to study the effects of small fields and misregistration on Landsat-based crop proportion estimation procedures. The simulation employs a pattern of ground polygons each with a crop ID, planting date, and scale factor. Historical greenness/brightness crop development profiles generate the mean signal values for each polygon. Historical within-field covariances add texture to pixels in each polygon. The planting dates and scale factors create between-field/within-crop variation. Between field and crop variation is achieved by the above and crop profile differences. The Landsat point spread function is used to add correlation between nearby pixels. The next effect of the point spread function is to blur the image. Mixed pixels and misregistration are also simulated. Previously announced in STAR as N82-32813

Pont, W. F., Jr.↗
NASA NTRS1994

Spectral emissivity measurements of land-surface materials and related radiative transfer simulations

Spectral radiance measurements have been made in the laboratory and in the field for deriving spectral emissivities of some land cover samples with a spectroradiometer and an auxiliary radiation source in the wavelength range 2.5-14.5 micrometers. A easy and quick four-step method (four steps to measure the sample and a diffuse reflecting plate surface under sunshine and shadowing conditions, respectively) has been used for simultaneous determination of surface temperature and emissivity. We emphasized in-situ measurements in combination with radiative transfer simulations, and an error analysis for basic assumptions in deriving spectral emissivity of land-surface samples from thermal infrared measurements.

Wan, Z.↗
DOE OSTI2022

Pore-Scale Simulation of Spectral Induced Polarization

A new model was developed to simulate spectral induced polarization (SIP) in porous media. The model is based on a pore-network approximation of the soil or rock, in which bonds between pores are represented by equivalent circuits. In the circuit model, electrolytic and surface conduction occur in parallel, with the electrolyte behaving as a single resistor, and the mineral surface behaving as a resistor and capacitor in series. Based on the pore geometry, fluid conductivity, and mineral surface conductivity, an impedance network is generated. SIP spectra are calculated by solving the sinusoidal steady-state electrical problem for a range of frequencies. The new model provides a tool to bridge the gap between (1) our fundamental understanding of polarization processes at the scale of a single pore or grains and (2) existing simulation capabilities for macroscale systems that do not account for pore-scale properties. The model is implemented in Matlab and can solve two-dimensional and three-dimensional (2D and 3D) networks. Examples for regular cubic lattices are presented, but the method and code are flexible with respect to pore geometries and allow for future leveraging of existing open-source capabilities for generation of pore networks and extraction of network geometries from micro imaging of core samples.

58 GEOSCIENCES↗
NASA NTRS1985

Air mass 1.5 global and direct solar simulation and secondary reference cell calibration using a filtered large area pulsed solar simulator

Spectral mismatch between a solar simulator and a desired spectrum can result in nearly 20 percent measurement error in the output of photovoltaic devices. This occurs when a crystalline silicon cell monitors the intensity of an unfiltered large area pulsed solar simulator (LAPSS) simulating the ASTM air mass 1.5 direct spectrum and the test device is amorphous silicon. The LAPSS spectral irradiance is modified with readily available glass UV filters to closely match either the ASTM air mass 1.5 direct or global spectrum. Measurement error is reduced to about 1 percent when using either filter if the reference cell and test device are the same general type.

Mueller, Robert L.↗
NASA NTRS2014

Time-Spectral Rotorcraft Simulations on Overset Grids

The Time-Spectral method is derived as a Fourier collocation scheme and applied to NASA's overset Reynolds-averaged Navier-Stokes (RANS) solver OVERFLOW. The paper outlines the Time-Spectral OVERFLOWimplementation. Successful low-speed laminar plunging NACA 0012 airfoil simulations demonstrate the capability of the Time-Spectral method to resolve the highly-vortical wakes typical of more expensive three-dimensional rotorcraft configurations. Dealiasing, in the form of spectral vanishing viscosity (SVV), facilitates the convergence of Time-Spectral calculations of high-frequency flows. Finally, simulations of the isolated V-22 Osprey tiltrotor for both hover and forward (edgewise) flight validate the three-dimensional Time-Spectral OVERFLOW implementation. The Time-Spectral hover simulation matches the time-accurate calculation using a single harmonic. Significantly more temporal modes and SVV are required to accurately compute the forward flight case because of its more active, high-frequency wake.

Rotocraft↗
NASA NTRS1989

Spectral element simulations of laminar and turbulent flows in complex geometries

Spectral element methods are high-order weighted residual techniques based on spectral expansions of variables and geometry for the Navier-Stokes (NS) and transport equations. Here, practical aspects of these methods and their efficient implementation are examined, and several examples of flows in truly complex geometries are presented. The spectral element discretization for NS equations is introduced, and the convergence of the method is addressed. An efficient data management scheme is discussed in the context of parallel processing computations. The method is validated by comparing the spectral element solutions with the exact eigensolutions for the Orr-Sommerfeld equations in two and three dimensions. Computer-aided flow visualizations are presented for an impulsive flow past a sharp edge wedge. Three-dimensional states of channel flow disrupted by an array of cylindrical eddy promoters are studied, and the results of a direct simulation of the turbulent flow in a plane channel are presented.

Karniadakis, George EM↗
NASA NTRS2006

Hydrocarbon-Fueled Rocket Engine Plume Diagnostics: Analytical Developments and Experimental Results

A viewgraph presentation describing experimental results and analytical developments about plume diagnostics for hydrocarbon-fueled rocket engines is shown. The topics include: 1) SSC Plume Diagnostics Background; 2) Engine Health Monitoring Approach; 3) Rocket Plume Spectroscopy Simulation Code; 4) Spectral Simulation for 10 Atomic Species and for 11 Diatomic Molecular Electronic Bands; 5) "Best" Lines for Plume Diagnostics for Hydrocarbon-Fueled Rocket Engines; 6) Experimental Set Up for the Methane Thruster Test Program and Experimental Results; and 7) Summary and Recommendations.

Tejwani, Gopal D.↗
NASA NTRS2014

Field Results from Three Campaigns to Validate the Performance of the Miniaturized Laser Heterodyne Radiometer (Mini‐LHR) for Measuring Carbon Dioxide and Methane in the Atmospheric Column

In a collaboration between NASA GSFC and GWU, a low-cost, surface instrument is being developed that can continuously monitor key carbon cycle gases in the atmospheric column: carbon dioxide (CO2) and methane (CH4). The instrument is based on a miniaturized, laser heterodyne radiometer (LHR) using near infrared (NIR) telecom lasers. Despite relatively weak absorption line strengths in this spectral region, spectrallyresolved atmospheric column absorptions for these two molecules fall in the range of 60-80% and thus sensitive and precise measurements of column concentrations are possible. In the last year, the instrument was deployed for field measurements at Park Falls, Wisconsin; Castle Airport near Atwater, California; and at the NOAA Mauna Loa Observatory in Hawaii. For each subsequent campaign, improvement in the figures of merit for the instrument has been observed. In the latest work the absorbance noise is approaching 0.002 optical density (OD) noise on a 1.8 OD signal. An overview of the measurement campaigns and the data retrieval algorithm for the calculation of column concentrations will be presented. For light transmission through the atmosphere, it is necessary to account for variation of pressure, temperature, composition, and refractive index through the atmosphere that are all functions of latitude, longitude, time of day, altitude, etc. For temperature, pressure, and humidity profiles with altitude we use the Modern-Era Retrospective Analysis for Research and Applications (MERRA) data. Spectral simulation is accomplished by integrating short-path segments along the trajectory using the SpecSyn spectral simulation suite developed at GW. Column concentrations are extracted by minimizing residuals between observed and modeled spectrum using the Nelder-Mead simplex algorithm. We will also present an assessment of uncertainty in the reported concentrations from assumptions made in the meteorological data, LHR instrument and tracker noise, and radio frequency bandwidth and describe additional future goals in instrument development and deployment target

meteorological data↗