SEARCH · Search NASA
Results for “Spin Seebeck effect”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Antiferromagnetic spin Seebeck effect.
We report on the observation of the spin Seebeck effect in antiferromagnetic MnF2. A device scale on-chip heater is deposited on a bilayer of MnF2 (110) (30nm)/Pt (4 nm) grown by molecular beam epitaxy on a MgF2(110) substrate. Using Pt as a spin detector layer, it is possible to measure the thermally generated spin current from MnF2 through the inverse spin Hall effect. The low temperature (2–80 K) and high magnetic field (up to 140 kOe) regime is explored. A clear spin-flop transition corresponding to the sudden rotation of antiferromagnetic spins out of the easy axis is observed in the spin Seebeck signal when large magnetic fields (>9T) are applied parallel to the easy axis of the MnF2 thin film. When the magnetic field is applied perpendicular to the easy axis, the spin-flop transition is absent, as expected.
Spectral characteristics of time resolved magnonic spin Seebeck effect
Spin Seebeck effect (SSE) holds promise for new spintronic devices with low-energy consumption. The underlying physics, essential for a further progress, is yet to be fully clarified. This study of the time resolved longitudinal SSE in the magnetic insulator yttrium iron garnet concludes that a substantial contribution to the spin current stems from small wave-vector subthermal exchange magnons. Our finding is in line with the recent experiment by S. R. Boona and J. P. Heremans [Phys. Rev. B 90, 064421 (2014)]. Technically, the spin-current dynamics is treated based on the Landau-Lifshitz-Gilbert equation also including magnons back-action on thermal bath, while the formation of the time dependent thermal gradient is described self-consistently via the heat equation coupled to the magnetization dynamics.
Absence of anomalous Nernst effect in spin Seebeck effect of Pt/YIG
The Pt/YIG structure has been widely used to study spin Seebeck effect (SSE), inverse spin Hall effect, and other pure spin current phenomena. However, the magnetic proximity effect in Pt when in contact with YIG, and the potential anomalous Nernst effect (ANE) may compromise the spin current phenomena in Pt/YIG. By inserting a Cu layer of various thicknesses between Pt and YIG, we have separated the signals from the SSE and that of the ANE. It is demonstrated that the thermal voltage in Pt/YIG mainly comes from spin current due to the longitudinal SSE with negligible contribution from the ANE.
Separation of spin Seebeck effect and anomalous Nernst effect in Co/Cu/YIG
The spin Seebeck effect (SSE) and Anomalous Nernst effect (ANE) have been observed in Co/Cu/YIG (yttrium iron garnet) multi-layer structure, where the ferromagnetic insulator YIG acts as the pure spin injector and the ferromagnetic metal Co layer acts as the spin current detector. Finally, with the insertion of 5 nm Cu layer, the two ferromagnetic layers are decoupled, thus allowing unambiguous separation of the SSE and ANE contributions under the same experimental conditions in the same sample.
Unambiguous separation of the inverse spin Hall and anomalous Nernst effects within a ferromagnetic metal using the spin Seebeck effect
In this paper, the longitudinal spin Seebeck effect is measured on the ferromagnetic insulator Fe 3 O 4 with the ferromagnetic metal Co 0.2 Fe 0.6 B 0.2 (CoFeB) as the spin detector. By using a non-magnetic spacer material between the two materials (Ti), it is possible to decouple the two ferromagnetic materials and directly observe pure spin flow from Fe 3 O 4 into CoFeB. It is shown that in a single ferromagnetic metal, the inverse spin Hall effect (ISHE) and anomalous Nernst effect (ANE) can occur simultaneously with opposite polarity. Using this and the large difference in the coercive fields between the two magnets, it is possible to unambiguously separate the contributions of the spin Seebeck effect from the ANE and observe the degree to which each effect contributes to the total response. Finally, these experiments show conclusively that the ISHE and ANE in CoFeB are separate phenomena with different origins and can coexist in the same material with opposite response to a thermal gradient.
Vector spin Seebeck effect and spin swapping effect in antiferromagnetic insulators with non-collinear spin structure
Antiferromagnets (AFs) are prospective for next-generation high-density and high-speed spintronic applications due to their negligible stray field and ultrafast spin dynamics, notwithstanding the challenges in detecting and manipulating AF order with no magnetization (M = 0). Among the AFs, non-collinear AFs are of particular interest because of their unique properties arising from the non-collinear spin structure and the small magnetization M. In this work, we describe the recently observed vector spin Seebeck effect in non-collinear LuFeO 3 , where the magneto-thermovoltage under an in-plane temperature gradient, not previously observed, is consistent with the predicted spin swapping effect. Our results shed light on the importance of the non-collinear spin structure in the emerging spin phenomena in non-collinear AFs and offer a new class of materials for AF spintronics and spin caloritronics.
Role of Magnon-Magnon Scattering in Magnon Polaron Spin Seebeck Effect
The spin Seebeck effect (SSE) signal of magnon polarons in bulk-Y 3 Fe 5 O 12 (YIG)/Pt heterostructures is found to drastically change as a function of temperature. It appears as a dip in the total SSE signal at low temperatures, but as the temperature increases, the dip gradually decreases before turning to a peak. We attribute the observed dip-to-peak transition to the rapid rise of the four-magnon scattering rate. Our analysis provides important insights into the microscopic origin of the hybridized excitations and the overall temperature dependence of the SSE anomalies.
Probing short-range magnetic order in a geometrically frustrated magnet by means of the spin Seebeck effect
The spin Seebeck effect (SSE) is a phenomenon where a spin current is generated from thermal excitations in magnetic materials. It is believed that magnetic long-range order (LRO) is not required for SSE, while short-ranged order (SRO) plays an important role. However, a definitive experimental demonstration of the connection between the SSE and SRO has been missing. Here, we show that the SSE is able to probe a specific SRO in a model geometrically frustrated magnet Gd 3 Ga 5 O 12 (GGG). A field-induced SRO in GGG is detected by the SSE in the temperature range 2-5 K. The origin of the SRO is verified by comparing the SSE data directly to existing neutron scattering measurements at much lower temperatures (T < 0.9 K), where field-induced LRO exists. Our theoretical calculations of the magnetic structure further confirm the anisotropic field dependence of the SRO in GGG. Furthermore, these findings establish that the SSE can serve as an effective probe of SRO in geometrically frustrated magnets.
Joule heating-induced coexisted spin Seebeck effect and spin Hall magnetoresistance in the platinum/Y{sub 3}Fe{sub 5}O{sub 12} structure
Spin Seebeck effect (SSE) and spin Hall magnetoresistance (SMR) are observed simultaneously in the Pt/Y{sub 3}Fe{sub 5}O{sub 12} hybrid structure when thermal gradient is produced by Joule heating. According to their dependences on applied current, these two effects can be separated. Their dependence on heating power and magnetic field is systematically studied. With the increase of heating power, the SSE enhances linearly, whereas the SMR decreases slowly. The origin of the spin currents is further analyzed. The heating power dependences of the spin currents associated with the SSE and the SMR are found to be different.
Investigation of the magnetic properties of insulating thin films using the longitudinal spin Seebeck effect
The longitudinal spin Seebeck effect is used as a detector for the magnetic properties and switching characteristics of magnetic thin insulating films. We use a 300 nm and a 20 nm thick Yttrium Iron Garnet (YIG, Y{sub 3}Fe{sub 5}O{sub 12}) film prepared by pulsed laser deposition and afterwards coated by platinum for the detection of the thermally excited magnons by the inverse spin Hall effect. The inverse spin Hall signals reveal a magnetic uniaxial anisotropy along the direction of the platinum stripe in the thicker film. For the thin film we find a more isotropic behavior, which is complementarily observed using the magnetoresistance occurring at the platinum/YIG interface. We explain our results on the basis of x-ray diffraction data, which reveal a miscut of the substrate and film surface and an expansion of the YIG lattice. Both findings favor a growth-induced magnetic anisotropy that we observe.
Distinguishing antiferromagnetic spin sublattices via the spin Seebeck effect
We measured spin Seebeck signals at the top and bottom surfaces of an antiferromagnetic Cr 2 O 3 film, using a Pt/Cr 2 O 3 /Pt trilayer. Our experimental data, combined with micromagnetic simulations, clearly demonstrate that the uncompensated sublattice at the top and bottom surfaces plays a decisive role in determining the symmetry of the spin Seebeck signals, providing fundamental insight for understanding the generation of spin Seebeck signal in antiferromagnetic materials.
Spin-orbit coupling induced robust spin-Seebeck effect and pure thermal spin currents in achiral molecule systems
Spin-Seebeck effect (SSE) is an effective route to realize pure spin current by using spin-polarized electrons or spin-wave transport in magnetic systems. In this work we propose a route, i.e., by using spin-orbit coupling (SOC), to achieve robust SSE characterized by pure thermal spin current. The material examples are constructed on achiral nanotubes, and the theoretical results reveal that (i) as temperature gradient is applied along the nanotubes, thermal spin-up and spin-down currents with opposite flow directions are produced without any accompanying charge current, (ii) the SSE is robust against decoherence and nonuniform interchain SOC, (iii) the thermal spin currents display a multioscillation feature with increasing device temperatures, supporting their potential device applications in thermal spin-current multiswitcher, and (vi) strain engineering in the radical direction of nanotubes is an effective way to improve SSE and to control pure thermal spin current. These inspiring spin transport behaviors in achiral molecular systems put forward a mechanism to realize the robust SSE characterized by pure spin current and develop the research field of spin-orbito-caloritronics, which focuses on the interplay of electrons’ spin and orbital degrees of freedom in the presence of temperature gradient.
Observation of inverse spin Hall effect in ferromagnetic FePt alloys using spin Seebeck effect
We experimentally observed the inverse spin Hall effect (ISHE) of ferromagnetic FePt alloys. Spin Seebeck effect due to the temperature gradient generated the spin current (J{sub s}) in the FePt|Y{sub 3}Fe{sub 5}O{sub 12} (YIG) structure, and J{sub s} was injected from YIG to FePt and converted to the charge current through ISHE of FePt. The significant difference in magnetization switching fields for FePt and YIG led to the clear separation of the voltage of ISHE from that of anomalous Nernst effect in FePt. We also investigated the effect of ordering of FePt crystal structure on the magnitude of ISHE voltage in FePt.
Voltage-Controlled Sensitivity of the Spin Seebeck Effect in Pt/Y 3 Fe 5 O 12 /MgO/(PbMg 1/3 Nb 2/3 O 3 ) 0.7 (PbTiO 3 ) 0.3 Multiferroic Heterostructures
The characteristics of pure spin current from the longitudinal spin Seebeck effect are investigated at room temperature in Pt / Y 3 Fe 5 O 12 deposited on the ( Pb Mg 1 / 3 Nb 2 / 3 O 3 ) 0.7 ( Pb Ti O 3 ) 0.3 substrate, through which electrostrain can be controllably applied. The applied voltage enables the modification of magnetic anisotropy in the magnetic insulating Y 3 Fe 5 O 12 layer, and thus the sensitivity of the spin Seebeck effect at small magnetic fields, without suppressing the spin Seebeck effect and the inverse spin Hall effect. This is due to the robust intrinsic physical parameters in Pt / Y 3 Fe 5 O 12 . In conclusion, our results pave the way for the application of voltage-controlled pure spin-current devices.
Current heating induced spin Seebeck effect
A measurement technique for the spin Seebeck effect is presented, wherein the normal metal layer used for its detection is exploited simultaneously as a resistive heater and thermometer. We show how the various contributions to the measured total signal can be disentangled, allowing to extract the voltage signal solely caused by the spin Seebeck effect. To this end, we performed measurements as a function of the external magnetic field strength and its orientation. We find that the effect scales linearly with the induced rise in temperature, as expected for the spin Seebeck effect.