SEARCH · Search NASA
Results for “Stable carbon isotopes”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stable-carbon isotope ratios for sourcing the nerve-agent precursor methylphosphonic dichloride and its products
The ability to connect a chemical threat agent to a specific batch of a synthetic precursor can provide a fingerprint to contribute to effective forensic investigations. Stable isotope analysis can leverage intrinsic, natural isotopic variability within the molecules of a threat agent to unlock embedded chemical fingerprints in the material. Methylphosphonic dichloride (DC) is a chemical precursor to the nerve agent sarin. It is converted to methylphosphonic difluoride (DF) as part of the sarin synthesis process. We used a suite of commercially available DC stocks to both evaluate the potential for δ13C analysis to be used as a fingerprinting tool in sarin-related investigations and to develop sample preparation techniques (using chemical hydrolysis) that can simplify isotopic analysis of DC and its synthetic products. We demonstrate that natural isotopic variability in DC results in at least three distinct, isotope-resolved clusters within the thirteen stocks we analyzed. Isotopic variability in the carbon feedstock (i.e., methanol) used for DC synthesis is likely inherited by the DC samples we measured. We demonstrate that the hydrolysis of DC and DF to methylphosphonic acid (MPA) can be used as a preparative step for isotopic analysis because the reaction does not impart a measureable isotopic fractionation. MPA is more chemically stable, less toxic, and easier to handle than DC or DF. Further, the hydrolysis method we demonstrated can be applied to a suite of other precursors or to sarin itself, thereby providing a potentially valuable forensic tool.
Quantitative Determination of Biomass-derived Renewable Carbon in Fuels from Coprocessing of Bio-oils in Refinery Using a Stable Carbon Isotopic Approach
Increasing renewable carbon incorporation into conventional fuels through coprocessing with vacuum gas oil (VGO, a petroleum refining feedstock) is a critical step in biofuels development, scaling-up, adoption and associated GHG reduction. Optimization of the co-processing parameters maximizes incorporation of the renewable carbon in the fuel products. Quantitative determination of the renewable carbon content in the co-processed products provides direct evaluation of the parameters. The co-processing bio-oil with VGO through hydrocracking (HC) or fluid catalytic cracking (FCC) system resulted in carbon isotopic fractionation that prevented the direct use of the isotope mixing model for quantifying the renewable carbon. Here, we report an algorithm of using a stable carbon isotope approach to quantify the renewable carbon content in co-processing biofuel products through high-precision ?13C analysis. A controlled experiment carried out by blending a fossil diesel (-29.013‰) with a bio-diesel (-30.099‰) at various blending levels up to 98.0/2.0 wt% is presented and has demonstrated the applicability of this approach. The carbon isotope fractionation factors for the bio-oil co-processing were obtained by using a 14C-derived isotope-mixing model. The ?13C method was tested by co-processing 13C-labeled bio-crude and natural woody biomass-derived fast pyrolysis (FP) and catalytic fast pyrolysis (CFP) bio-oils with VGO. The results were verified by 14C accelerator mass spectrometry (AMS) method (ASTM-D6866) and compared with the yield mass balance (YMB) method. Strong agreement between d13C and 14C AMS methods demonstrated the applicability of the ?13C method to quantify renewable carbon content in co-processing fuel products and guide the co-processing optimization
Biogeochemistry of stable carbon isotopes
Biochemistry and geochemistry of stable carbon istopes
Stable Carbon Isotopic Signatures of Abiotic Organics from Hydrothermal Synthesis Experiments
Stable carbon isotopes can be powerful biogeochemical markers in the study of life's origins. Biogenic carbon fixation produces organics that are depleted in C-13 by about -20 to -30%0. Less attention has been paid to the isotopic signatures of abiotic processes. The possibility of abiotic processes producing organics with morphologies and isotopic signatures in the biogenic range has been at the center of recent debate over the Earth's earliest microfossils. The abiotic synthesis of organic compounds in hydrothermal environments is one possible source of endogenous organic matter to the prebiotic earth. Simulated hydrothermal settings have been shown to synthesize, among other things, single chain amphiphiles and simple lipids from a mix of CO, CO2, and H2. A key characteristic of these amphiphilic molecules is the ability to self-assemble in aqueous phases into more organized structures called vesicles, which form a selectively permeable boundary and serve the function of containing and concentrating other organic molecules. The ability to form cell like structures also makes these compounds more likely to be mistaken for biogenic. Hydrothermal simulation experiments were conducted from oxalic or formic acid in water at 175 C for 72 hr. The molecular and isotopic composition of the products of these reactions were determined and compared to biogenic fractionations . Preliminary results indicate isotopic fractionation during abiotic hydrocarbon synthesis in hydrothermal environments is on par with biological carbon fixation.
Stable carbon isotope values of syndepositional carbonate spherules and micrite record spatial and temporal changes in photosynthesis intensity
Marine and lacustrine carbonate minerals preserve carbon cycle information, and their stable carbon isotope values (δ 13 C) are frequently used to infer and reconstruct paleoenvironmental changes. However, multiple processes can influence the δ 13 C values of bulk carbonates, confounding the interpretation of these values in terms of conditions at the time of mineral precipitation. Co-existing carbonate forms may represent different environmental conditions, yet few studies have analyzed δ 13 C values of syndepositional carbonate grains of varying morphologies to investigate their origins. Here, we combine stable isotope analyses, metagenomics, and geochemical modeling to interpret δ 13 C values of syndepositional carbonate spherules (>500 μm) and fine-grained micrite (<63 μm) from a ~1600-year-long sediment record of a hypersaline lake located on the coral atoll of Kiritimati, Republic of Kiribati (1.9°N, 157.4°W). Petrographic, mineralogic, and stable isotope results suggest that both carbonate fractions precipitate in situ with minor diagenetic alterations. The δ 13 C values of spherules are high compared to the syndepositional micrite and cannot be explained by mineral differences or external perturbations, suggesting a role for local biological processes. We use geochemical modeling to test the hypothesis that the spherules form in the surface microbial mat during peak diurnal photosynthesis when the δ 13 C value of dissolved inorganic carbon is elevated. In contrast, we hypothesize that the micrite may precipitate more continuously in the water as well as in sub-surface, heterotrophic layers of the microbial mat. Both metagenome and geochemical model results support a critical role for photosynthesis in influencing carbonate δ 13 C values. The down-core spherule–micrite offset in δ 13 C values also aligns with total organic carbon values, suggesting that the difference in the δ13C values of spherules and micrite may be a more robust, inorganic indicator of variability in productivity and local biological processes through time than the δ 13 C values of individual carbonate forms.
Oxygen and carbon stable isotope composition of the weathering Mg-carbonates on the surface of the LEW 85320 ordinary chondrite: Revisited
New δ13C and δ18O values were measured to constrain the formation mechanisms of two previously identified generations (Antarctica and Houston) of terrestrial weathering carbonates, nesquehonite, which formed on the surface of the Lewis Cliff 85320 ordinary chondrite. These two nesquehonite generations exhibit a characteristic carbon and oxygen isotopic trend which starts with a linear δ13C-δ18O covariation followed by a continuous increase in δ18O with little to no change in δ13C. Based upon the newly developed nesquehonite-water oxygen isotope thermometry and the measured δ18O value of melted ice from Antarctica, the formation temperature of the Antarctic nesquehonite generation was estimated to be -1.9 ± 3℃. Houston nesquehonite generation was most likely formed from an evaporative residue of the melted Antarctic ice at 30 ± 4℃. Modeling the isotopic trend of the two generations suggests that evaporation created large δ18O variations in the nesquehonite while carbon isotopes were stabilized by exchange between the parent liquid and atmospheric CO2. Thus, we suggest that carbonates formed by terrestrial weathering in Antarctica should possess a widespread in δ18O values and a narrow range in δ13C values under dry and cold conditions. Finally, the observed wide spread of δ18O in Martian carbonates (e.g., Allan Hills 84001 and Nakhla) can be explained by evaporation near 0℃ and may have formed by a similar mechanism to that of the nesquehonite in the LEW 85320. Meanwhile, the wide spread of δ13C suggests that two carbon reservoirs with distinct isotope compositions on Mars (e.g., the atmospheric carbon and magmatic carbon) may be actively participating in the formation process.
Seasonal variations in the stable carbon isotopic signature of biogenic methane in a coastal sediment
Systematic seasonal variations in the stable carbon isotopic signature of methane gas occur in the anoxic sediments of Cape Lookout Bight, a lagoonal basin on North Carolina's Outer Banks. Values for the carbon isotope ratio of methane range from -57.3 per mil during summer to -68.5 per mil during winter in gas bubbles with an average methane content of 95 percent. The variations are hypothesized to result from changes in the pathways of microbial methane production and cycling of key substrates including acetate and hydrogen. The use of stable isotopic signatures to investigate the global methane cycle through mass balance calculations, involving various sediment and soil biogenic sources, appears to require seasonally averaged data from individual sites.
The stable carbon isotope fractionation of methanogenesis products at complete carbon consumption
The stable carbon isotope signature (δ 13 C) of methane (CH 4 ) is used to discriminate between biological, thermogenic, and abiotic sources. Methanogens, or methane producing archaea, inhabit a broad range of chemical conditions. Many of these environments are replete in dissolved inorganic carbon (DIC), causing isotopically depleted δ 13 C biogenic CH 4 . However, some extreme environments inhabited by methanogens, such as serpentinising systems, exhibit low carbon dioxide (CO 2 ) availability, replete H 2 , and isotopically enriched δ 13 C CH 4 that is outside the known biogenic range. We measured the δ 13 C of CO 2 , biomass, lipids, and CH 4 during hydrogenotrophic methanogenesis under hydrogen replete conditions with a limited carbon pool to investigate carbon isotope dynamics at complete DIC consumption. As theory predicts, we found that the final, accumulated methane δ 13 C values closely reflect the δ 13 C of the initial DIC supply, and that methane is more 13 C enriched than biomass and lipids. This provides the first experimental evidence that methanogens can achieve complete carbon consumption and thus can produce accumulated CH 4 products that isotopically reflect the initial CO 2 . These data show that the range of possible δ 13 C values from biogenic methane needs to be expanded for natural environments impacted by extreme carbon limitation.
Quantitative assessment of soil CO 2 concentration and stable carbon isotope for leakage detection at geological carbon sequestration sites
This paper presents a quantitative method to evaluate CO 2 concentration ([CO 2 ]) and stable carbon isotope ratio (δ 13 C) as indicators for leakage detection at a geological carbon sequestration site by combining use of field release tests and a numerical modeling approach. A numerical model was developed to simulate CO 2 dynamics by considering diffusion, dissolution in soil water, and soil respiration. The numerical model fits the background dynamics of [CO 2 ] (360 to 550 ppm) and δ 13 C (-16‰ to -6‰) well and reproduces fairly the overall trend observed during the CO 2 release test. The model was further applied to assess detection probability (DP) of [CO 2 ] and δ 13 C for leakage detection in terms of various factors, such as CO 2 leakage rate, background variations, δ 13 C of the CO 2 leaked, and the threshold value of signal-to-noise ratio. Modeling results suggest that δ 13 C may have a higher DP than [CO 2 ]. This study also shows that DP of δ 13 C for the IEA Weyburn project is close to 0, implying δ 13 C is inappropriate to be an indicator for CO 2 leakage at the site. Finally, the quantitative method developed can also be used to design a monitoring plan or strategy in a near-surface environment for geological carbon sequestration.
Stable carbon isotope measurements using laser spectroscopy
The 2300 cm(exp -1) spectral region is especially interesting because (12)CO2 and (13)CO2 bands overlap in such a way that their rotational lines have approximately equal absorbance at the anticipated isotopic ratio (approximately 90) of carbon on Earth and Mars. Pairs of rotational lines we have studied are separated by as little as 0.050 cm(exp -1), but are well resolved with a tunable diode laser. Using sophisticated sweep integration and signal averaging techniques, we have measured the stable isotope ratio in carbon dioxide to a precision of better than 1 percent.
Characteristics and carbon stable isotopes of fluids in the Southern Kerala granulites and their bearing on the source of CO2
Carbon dioxide-rich inclusions commonly occur in the banded charnockites and khondalites of southern Kerala as well as in the incipient charnockites formed by desiccation of gneisses along oriented zones. The combined high density fluid inclusion isochores and the range of thermometric estimates from mineral assemblages indicate entrapment pressures in the range of 5.4 to 6.1 Kbar. The CO2 equation of state barometry closely compares with the 5 plus or minus 1 Kbar estimate from mineral phases for the region. The isochores for the high density fluid inclusions in all the three rock types pass through the P-T domain recorded by phase equilibria, implying that carbon dioxide was the dominating ambient fluid species during peak metamorphic conditions. In order to constrain the source of fluids and to evaluate the mechanism of desiccation, researchers undertook detailed investigations of the carbon stable isotope composition of entrapped fluids. Researchers report here the results of preliminary studies in some of the classic localities in southern Kerala namely, Ponmudi, Kottavattom, Manali and Kadakamon.
Determination of the origin of dissolved inorganic carbon in groundwater around a reclaimed landfill in Otwock using stable carbon isotopes
Highlights: • Research showed the origin of DIC in the groundwater around a reclaimed landfill. • Carbon isotope was used to evaluate the contributions of carbon from different sources. • The leachate-contaminated water was isotopically distinct from the natural groundwater. • DIC in the natural groundwater comes from organic matter and dissolution of carbonates. • In the contaminated water, DIC comes from organic matter in the aquifer and landfill. - Abstract: Chemical and isotopic analyses of groundwater from piezometers located around a reclaimed landfill in Otwock (Poland) were performed in order to trace the origin of dissolved inorganic carbon (DIC) in the groundwater. Due to differences in the isotopic composition of carbon from different sources, an analysis of stable carbon isotopes in the groundwater, together with the Keeling plot approach and a two-component mixing model allow us to evaluate the relative contributions of carbon from these sources in the groundwater. In the natural (background) groundwater, DIC concentrations and the isotopic composition of DIC (δ{sup 13}C{sub DIC}) comes from two sources: decomposition of organic matter and carbonate dissolution within the aquifer sediments, whereas in the leachate-contaminated groundwater, DIC concentrations and δ{sup 13}C{sub DIC} values depend on the degradation of organic matter within the aquifer sediments and biodegradation of organic matter stored in the landfill. From the mixing model, about 4–54% of the DIC pool is derived from organic matter degradation and 96–46% from carbonate dissolution in natural conditions. In the leachate-contaminated groundwater, about 20–53% of the DIC is derived from organic matter degradation of natural origin and 80–47% from biodegradation of organic matter stored in the landfill. Partial pressure of CO{sub 2} (P CO{sub 2}) was generally above the atmospheric, hence atmospheric CO{sub 2} as a source of carbon in DIC pool was negligible in the aquifer. P CO{sub 2} values in the aquifer in Otwock were always one to two orders of magnitude above the atmospheric P CO{sub 2}, and thus CO{sub 2} escaped directly into the vadose zone.
Factors that control the stable carbon isotopic composition of methane produced in an anoxic marine sediment
The carbon isotopic composition of methane produced in anoxic marine sediment is controlled by four factors: (1) the pathway of methane formation, (2) the isotopic composition of the methanogenic precursors, (3) the isotope fractionation factors for methane production, and (4) the isotope fractionation associated with methane oxidation. The importance of each factor was evaluated by monitoring stable carbon isotope ratios in methane produced by a sediment microcosm. Methane did not accumulate during the initial 42-day period when sediment contained sulfate, indicating little methane production from 'noncompetitive' substrates. Following sulfate depletion, methane accumulation proceeded in three distinct phases. First, CO2 reduction was the dominant methanogenic pathway and the isotopic composition of the methane produced ranged from -80 to -94 per thousand. The acetate concentration increased during this phase, suggesting that acetoclastic methanogenic bacteria were unable to keep pace with acetate production. Second, acetate fermentation became the dominant methanogenic pathway as bacteria responded to elevated acetate concentrations. The methane produced during this phase was progressively enriched in C-13, reaching a maximum delta(C-13) value of -42 per thousand. Third, the acetate pool experienced a precipitous decline from greater than 5 mM to less than 20 micro-M and methane production was again dominated by CO2 reduction. The delta(C-13) of methane produced during this final phase ranged from -46 to -58 per thousand. Methane oxidation concurrent with methane production was detected throughout the period of methane accumulation, at rates equivalent to 1 to 8 percent of the gross methane production rate. Thus methane oxidation was too slow to have significantly modified the isotopic signature of methane. A comparison of microcosm and field data suggests that similar microbial interactions may control seasonal variability in the isotopic composition of methane emitted from undisturbed Cape Lookout Bight sediment.
The genetic architecture of leaf stable carbon isotope composition in Zea mays and the effect of transpiration efficiency on leaf elemental accumulation
With increased demand on freshwater resources for agriculture, it is imperative that more water-use efficient crops are developed. Leaf stable carbon isotope composition, δ 13 C, is a proxy for transpiration efficiency and a possible tool for breeders, but the underlying mechanisms effecting δ 13 C in C 4 plants are not known. It has been suggested that differences in specific leaf area (SLA), which potentially reflects variation in internal CO 2 diffusion, can impact leaf δ 13 C. Furthermore, although it is known that water movement is important for elemental uptake, it is not clear how manipulation of transpiration for increased water-use efficiency may impact nutrient accumulation. Here, we characterize the genetic architecture of leaf δ 13 C and test its relationship to SLA and the ionome in five populations of maize. Five significant QTL for leaf δ 13 C were identified, including novel QTL as well as some that were identified previously in maize kernels. One of the QTL regions contains an Erecta-like gene, the ortholog of which has been shown to regulate transpiration efficiency and leaf δ 13 C in Arabidopsis. QTL for δ 13 C were located in the same general chromosome region, but slightly shifted, when comparing data from two different years. Our data does not support a relationship between δ 13 C and SLA, and of the 19 elements analyzed, only a weak correlation between molybdenum and δ 13 C was detected. Together these data add to the genetic understanding of leaf δ 13 C in maize and suggest that improvements to plant water use may be possible without significantly influencing elemental homeostasis.
Use of carbon stable isotopes to monitor biostimulation and electron donor fate in chromium-contaminated groundwater
Hexavalent chromium Cr(VI) is a common inorganic contaminant in industrial areas and represents a serious threat to human health due its toxicity. Here we report experimental results from a field-scale investigation of Cr(VI) bio-immobilization at Hanford 100H reservation, a U.S Department of Energy facility (Washington State, USA). Microbial Cr(VI) reduction was stimulated via injection of a 13 C-labeled sodium lactate solution into the high-permeability aquifer consisting of gravel and coarse sand sediments. Concentrations and carbon isotope ratios of metabolites, including dissolved inorganic carbon and total organic carbon, and compound-specific analysis of acetate and propionate, together with phospholipid fatty acids (biomass) have been analyzed to help provide an understanding of the predominant redox processes accompanying Cr(VI) reduction. Results of our study indicate that the injection of an electron donor caused a sharp decrease of Cr(VI) concentration from ~ 32 to ~ 10 nM. Cr(VI) reduction was associated with a decrease in the concentration of carboxylic acids, such as lactate (~ 6 mM to undetectable), propionate (~ 9 mM to undetectable), and acetate (~ 6 mM to undetectable), as well as dissolved inorganic carbon (30 to 10 mM C). Carbon isotope data indicate carbon transfers from the original substrate to organic byproducts and mineralized carbon. Concentrations of metabolites and stable isotope data as well as carbon isotope mass balance calculations were used to monitor biologically mediated reduction of Cr(VI).
Adding stable carbon isotopes improves model representation of the role of microbial communities in peatland methane cycling
Abstract Climate change is expected to have significant and uncertain impacts on methane (CH 4 ) emissions from northern peatlands. Biogeochemical models can extrapolate site‐specificCH 4 measurements to larger scales and predict responses of CH 4 emissions to environmental changes. However, these models include considerable uncertainties and limitations in representing CH 4 production, consumption, and transport processes. To improve predictions of CH 4 transformations, we incorporated acetate and stable carbon (C) isotopic dynamics associated with CH 4 cycling into a biogeochemistry model, DNDC. By including these new features, DNDC explicitly simulates acetate dynamics and the relative contribution of acetotrophic and hydrogenotrophic methanogenesis (AM and HM) to CH 4 production, and predicts the C isotopic signature (δ 13 C) in soil C pools and emitted gases. When tested against biogeochemical and microbial community observations at two sites in a zone of thawing permafrost in a subarctic peatland in Sweden, the new formulation substantially improved agreement with CH 4 production pathways and δ 13 C in emitted CH 4 (δ 13 C‐CH 4 ), a measure of the integrated effects of microbial production and consumption, and of physical transport. We also investigated the sensitivity of simulated δ 13 C‐CH 4 to C isotopic composition of substrates and, to fractionation factors for CH 4 production (α AM and α HM ), CH 4 oxidation (α MO ), and plant‐mediated CH 4 transport (α TP ). The sensitivity analysis indicated that the δ 13 C‐CH 4 is highly sensitive to the factors associated with microbial metabolism (α AM , α HM , and α MO ). The model framework simulating stable C isotopic dynamics provides a robust basis for better constraining and testing microbial mechanisms in predicting CH 4 cycling in peatlands.
Capillary absorption spectroscopy for high temporal resolution measurements of stable carbon isotopes in soil and plant-based systems
Capillary Absorption Spectroscopy (CAS) is a relatively new analytical technique for performing stable isotope analysis. Here, we demonstrate the utility of CAS by recording and quantifying variation in 13C in controlled and biologically relevant applications. We calibrated CAS system response to increased 13CO2, with an observed ~4‰ increase in measured Δ13C for each 0.03 ppm shift in 13CO2 concentration. We leveraged this calibration to quantify rates of biogeochemical processes using a 13C tracer. For example, we monitored microbial respiration of 13C-glucose within an agricultural soil at 10 s quantification intervals and results demonstrated 8.6% ± 0.4 of added glucose was converted to 13CO2 within 1.5 h of incubation. We expanded the demonstration by adapting a rhizobox to permit continuous monitoring of 13CO2 in a soil (as distinct from plant) headspace to track the timing and quantify respiration rates of fresh plant photosynthate and observed a 3.5 h delay between plant exposure to a13CO2 tracer and the first signs of respiration by soil biota. These experiments highlight CAS is effective in producing high temporal resolution quantification of 13CO2 and demonstrate potential applications.