Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stokes equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Stable boundary conditions and difference schemes for Navier-Stokes equations

The Navier-Stokes equations can be viewed as an incompletely elliptic perturbation of the Euler equations. By using the entropy function for the Euler equations as a measure of energy for the Navier-Stokes equations, it was possible to obtain nonlinear energy estimates for the mixed initial boundary value problem. These estimates are used to derive boundary conditions which guarantee L2 boundedness even when the Reynolds number tends to infinity. Finally, a new difference scheme for modelling the Navier-Stokes equations in multidimensions for which it is possible to obtain discrete energy estimates exactly analogous to those we obtained for the differential equation was proposed.

Dutt, P.↗

Applications of the contravariant form of the Navier-Stokes equations

The contravariant Navier-Stokes equations in weak conservation form are well suited to certain fluid flow analysis problems. Three dimensional contravariant momentum equations may be used to obtain Navier-Stokes equations in weak conservation form on a nonplanar two dimensional surface with varying streamsheet thickness. Thus a three dimensional flow can be simulated with two dimensional equations to obtain a quasi-three dimensional solution for viscous flow. When the Navier-Stokes equations on the two dimensional nonplanar surface are transformed to a generalized body fitted mesh coordinate system, the resulting equations are similar to the equations for a body fitted mesh coordinate system on the Euclidean plane. Contravariant momentum components are also useful for analyzing compressible, three dimensional viscous flow through an internal duct by parabolic marching. This type of flow is efficiently analyzed by parabolic marching methods, where the streamwise momentum equation is uncoupled from the two crossflow momentum equations. This can be done, even for ducts with a large amount of turning, if the Navier-Stokes equations are written with contravariant components.

Katsanis, T.↗

Optimization methods, flux conserving methods for steady state Navier-Stokes equation

Navier-Stokes equation as discretized by new flux conserving method proposed by Chang and Scott results in the system: vector F(vector x) = 0, where F is a vector valued function. The Optimization method we use is based on Quasi-Newton methods: given a nonlinear function vector F(vector x) = 0, we solve, Delta(vector x) = -BF(vector x), where Delta(vector x) is the correction term and B is the inverse Jacobian of F(x). Then, iteratively, vector(x(sub (i+1))) = vector(x (sub i)) + alpha.Delta(vector x(sub i)), where alpha is a line search correction term determined by a line search routine. We use the BFCG's update the Jacobian matrix B(sub k) at each iteration. It is well known that B(sub k) approaches B(*) at the solution X(*). This algorithm has several advantages over the Newton-Raphson method. For example, we do not need to calculate the Jacobian matrix at each iteration which is computationally very expensive.

Adeyeye, John↗

Factorization of the Compressible Navier-Stokes Equations

The Navier-Stokes equations for a Newtonian ideal gas are examined to determine the factorizable form of the equations relevant to the construction of a factorizable relaxation scheme. The principal linearization of the equations is found by examining the relative magnitude of the terms for short-wavelength errors. The principal part of the operator is then found. Comparison of the factors of the Navier-Stokes and Euler equations differ qualitatively because of the coupling of entropy and pressure through thermal diffusion. Special cases of the factorization are considered.

Roberts, Thomas W.↗

A remarkable operator version of the Navier-Stokes equation

The Navier-Stokes equation is transformed into a closed nonlinear equation for the convected curl operator. It is shown how Lie algebraic methods can be employed to solve the obtained double-commutator equation. The proposed operator equation provides a way to the further development of the Navier-Stokes fluid flow theory.

Rosen, G.↗

Boundary conditions for the Navier-Stokes equations

Using ideas from kinetic theory, the Navier-Stokes equations are modified in such a way that they can be cast as a set of first order hyperbolic equations. This is achieved by incorporating time dependent terms into the definition of the stress tensor and the heat flux vectors. The boundary conditions are then determined from the theory of characteristics. Because the resulting equations reduce to the traditional Navier-Stokes equations when the steady state is reached, the present approach provides a straightforward scheme for the determination of inflow and outflow boundary conditions. The method is validated by comparing its predictions with exact and numerical solutions of the steady Navier-Stokes equations.

Rudisill, Edgar N., Jr.↗

Multigrid and Krylov Subspace Methods for the Discrete Stokes Equations

Discretization of the Stokes equations produces a symmetric indefinite system of linear equations. For stable discretizations, a variety of numerical methods have been proposed that have rates of convergence independent of the mesh size used in the discretization. In this paper, we compare the performance of four such methods: variants of the Uzawa, preconditioned conjugate gradient, preconditioned conjugate residual, and multigrid methods, for solving several two-dimensional model problems. The results indicate that where it is applicable, multigrid with smoothing based on incomplete factorization is more efficient than the other methods, but typically by no more than a factor of two. The conjugate residual method has the advantage of being both independent of iteration parameters and widely applicable.

Elman, Howard C.↗

Numerical solutions of the complete Navier-Stokes equations

Using ideas from the kinetic theory, the Navier-Stokes equations are modified in such a way that they can be cast as a set of first order hyperbolic equations. This is achieved by incorporating time dependent terms into the definition of the stress tensor and the heat flux vectors. The boundary conditions are then determined from the theory of characteristics. Because the resulting equations reduce to the traditional Navier-Stokes equations when the steady state is reached, the present approach provides a straightforward scheme for the determination of inflow and outflow boundary conditions. The method is validated by comparing its predictions with known exact solutions of the steady Navier-Stokes equations.

Hassan, H. A.↗

Theoretical study of the incompressible Navier-Stokes equations by the least-squares method

Usually the theoretical analysis of the Navier-Stokes equations is conducted via the Galerkin method which leads to difficult saddle-point problems. This paper demonstrates that the least-squares method is a useful alternative tool for the theoretical study of partial differential equations since it leads to minimization problems which can often be treated by an elementary technique. The principal part of the Navier-Stokes equations in the first-order velocity-pressure-vorticity formulation consists of two div-curl systems, so the three-dimensional div-curl system is thoroughly studied at first. By introducing a dummy variable and by using the least-squares method, this paper shows that the div-curl system is properly determined and elliptic, and has a unique solution. The same technique then is employed to prove that the Stokes equations are properly determined and elliptic, and that four boundary conditions on a fixed boundary are required for three-dimensional problems. This paper also shows that under four combinations of non-standard boundary conditions the solution of the Stokes equations is unique. This paper emphasizes the application of the least-squares method and the div-curl method to derive a high-order version of differential equations and additional boundary conditions. In this paper, an elementary method (integration by parts) is used to prove Friedrichs' inequalities related to the div and curl operators which play an essential role in the analysis.

Jiang, Bo-Nan↗

A new flux conserving Newton's method scheme for the two-dimensional, steady Navier-Stokes equations

A new numerical method is developed for the solution of the two-dimensional, steady Navier-Stokes equations. The method that is presented differs in significant ways from the established numerical methods for solving the Navier-Stokes equations. The major differences are described. First, the focus of the present method is on satisfying flux conservation in an integral formulation, rather than on simulating conservation laws in their differential form. Second, the present approach provides a unified treatment of the dependent variables and their unknown derivatives. All are treated as unknowns together to be solved for through simulating local and global flux conservation. Third, fluxes are balanced at cell interfaces without the use of interpolation or flux limiters. Fourth, flux conservation is achieved through the use of discrete regions known as conservation elements and solution elements. These elements are not the same as the standard control volumes used in the finite volume method. Fifth, the discrete approximation obtained on each solution element is a functional solution of both the integral and differential form of the Navier-Stokes equations. Finally, the method that is presented is a highly localized approach in which the coupling to nearby cells is only in one direction for each spatial coordinate, and involves only the immediately adjacent cells. A general third-order formulation for the steady, compressible Navier-Stokes equations is presented, and then a Newton's method scheme is developed for the solution of incompressible, low Reynolds number channel flow. It is shown that the Jacobian matrix is nearly block diagonal if the nonlinear system of discrete equations is arranged approximately and a proper pivoting strategy is used. Numerical results are presented for Reynolds numbers of 100, 1000, and 2000. Finally, it is shown that the present scheme can resolve the developing channel flow boundary layer using as few as six to ten cells per channel width, depending on the Reynolds number.

Scott, James R.↗

An isoparametric spectral element method for solution of the Navier-Stokes equations in complex geometry

High-order (p-type) finite element methods combine the geometric flexibility of standard low-order finite element (or finite volume) techniques with the rapid convergence properties of spectral methods. Various p-type schemes have been proposed for elliptic problems. However, an application of p-type methods to more complex equations, in particular the passive scalar or Navier-Stokes equations, is complicated by the nature of the equations and by efficiency considerations as regards the solution procedure. Patera (1984) has proposed a p-type method for the Navier-Stokes equations, taking into account the arising additional complications. The present study is concerned with an isoparametric spectral element discretization for the solution of flow problems in fully general, curvy geometries. Attention is given to the isoparametric formulation for elliptic equations and a time-splitting scheme for the Navier-Stokes equations.

Korczak, K. Z.↗

First-Order System Least-Squares for the Navier-Stokes Equations

This paper develops a least-squares approach to the solution of the incompressible Navier-Stokes equations in primitive variables. As with our earlier work on Stokes equations, we recast the Navier-Stokes equations as a first-order system by introducing a velocity flux variable and associated curl and trace equations. We show that the resulting system is well-posed, and that an associated least-squares principle yields optimal discretization error estimates in the H(sup 1) norm in each variable (including the velocity flux) and optimal multigrid convergence estimates for the resulting algebraic system.

Bochev, P.↗

A dual potential formulation of the Navier-Stokes equations

A dual potential formulation for numerically solving the Navier-Stokes equations is developed and presented. The velocity field is decomposed using a scalar and vector potential. Vorticity and dilatation are used as the dependent variables in the momentum equations. Test cases in two dimensions verify the capability to solve flows using approximations from potential flow to full Navier-Stokes simulations. A three-dimensional incompressible flow formulation is also described. An interesting feature of this approach to solving the Navier-Stokes equations is the decomposition of the velocity field into a rotational part (vector potential) and an irrotational part (scalar potential). The Helmholtz decomposition theorem allows this splitting of the velocity field. This approach has had only limited use since it increases the number of dependent variables in the solution. However, it has often been used for incompressible flows where the solution scheme is known to be fast and accurate. This research extends the usage of this method to fully compressible Navier-Stokes simulations by using the dilatation variable along with vorticity. A time-accurate, iterative algorithm is used for the uncoupled solution of the governing equations. Several levels of flow approximation are available within the framework of this method. Potential flow, Euler and full Navier-Stokes solutions are possible using the dual potential formulation. Solution efficiency can be enhanced in a straightforward way. For some flows, the vorticity and/or dilatation may be negligible in certain regions (e.g., far from a viscous boundary in an external flow). It is possible to drop the calculation of these variables then and optimize the solution speed. Also, efficient Poisson solvers are available for the potentials. The relative merits of non-primitive variables versus primitive variables for solution of the Navier-Stokes equations are also discussed.

Gegg, S. G.↗

Two-boundary grid generation for the solution of the three dimensional compressible Navier-Stokes equations

A grid generation technique called the two boundary technique is developed and applied for the solution of the three dimensional Navier-Stokes equations. The Navier-Stokes equations are transformed from a cartesian coordinate system to a computational coordinate system, and the grid generation technique provides the Jacobian matrix describing the transformation. The two boundary technique is based on algebraically defining two distinct boundaries of a flow domain and the distribution of the grid is achieved by applying functions to the uniform computational grid which redistribute the computational independent variables and consequently concentrate or disperse the grid points in the physical domain. The Navier-Stokes equations are solved using a MacCormack time-split technique. Grids and supersonic laminar flow solutions are obtained for a family of three dimensional corners and two spike-nosed bodies.

Smith, R. E.↗

Prediction of vortical flows on wings using incompressible Navier-Stokes equations

Numerical solutions to the incompressible Navier-Stokes equations are in greater demand than ever before as the field of computational fluid dynamics (CFD) increases its impact as an engineering tool. An implicit upwind-relation finite-difference scheme is developed for solving unsteady incompressible Navier-Stokes equations incorporating an artificial time derivative of the pressure to the continuity equation. The essential features observed in experiments for complicated vortical flows past three round-edged low-aspect-ratio wings at high angles of attack are reproduced both qualitatively and quantitatively.

Hsu, C.-H.↗

The space-time solution element method: A new numerical approach for the Navier-Stokes equations

This paper is one of a series of papers describing the development of a new numerical method for the Navier-Stokes equations. Unlike conventional numerical methods, the current method concentrates on the discrete simulation of both the integral and differential forms of the Navier-Stokes equations. Conservation of mass, momentum, and energy in space-time is explicitly provided for through a rigorous enforcement of both the integral and differential forms of the governing conservation laws. Using local polynomial expansions to represent the discrete primitive variables on each cell, fluxes at cell interfaces are evaluated and balanced using exact functional expressions. No interpolation or flux limiters are required. Because of the generality of the current method, it applies equally to the steady and unsteady Navier-Stokes equations. In this paper, we generalize and extend the authors' 2-D, steady state implicit scheme. A general closure methodology is presented so that all terms up through a given order in the local expansions may be retained. The scheme is also extended to nonorthogonal Cartesian grids. Numerous flow fields are computed and results are compared with known solutions. The high accuracy of the scheme is demonstrated through its ability to accurately resolve developing boundary layers on coarse grids. Finally, we discuss applications of the current method to the unsteady Navier-Stokes equations.

Scott, James R.↗

Properties of the Residual Stress of the Temporally Filtered Navier-Stokes Equations

The development of a unifying framework among direct numerical simulations, large-eddy simulations, and statistically averaged formulations of the Navier-Stokes equations, is of current interest. Toward that goal, the properties of the residual (subgrid-scale) stress of the temporally filtered Navier-Stokes equations are carefully examined. Causal time-domain filters, parameterized by a temporal filter width 0 less than Delta less than infinity, are considered. For several reasons, the differential forms of such filters are preferred to their corresponding integral forms; among these, storage requirements for differential forms are typically much less than for integral forms and, for some filters, are independent of Delta. The behavior of the residual stress in the limits of both vanishing and in infinite filter widths is examined. It is shown analytically that, in the limit Delta to 0, the residual stress vanishes, in which case the Navier-Stokes equations are recovered from the temporally filtered equations. Alternately, in the limit Delta to infinity, the residual stress is equivalent to the long-time averaged stress, and the Reynolds-averaged Navier-Stokes equations are recovered from the temporally filtered equations. The predicted behavior at the asymptotic limits of filter width is further validated by numerical simulations of the temporally filtered forced, viscous Burger's equation. Finally, finite filter widths are also considered, and a priori analyses of temporal similarity and temporal approximate deconvolution models of the residual stress are conducted.

Pruett, C. D.↗

Turbulent solution of the Navier-Stokes equations

The unaveraged Navier-Stokes equations are solved numerically in order to study the nonlinear physics of incompressible turbulent flow. Initial three dimensional cosine velocity fluctuations and periodic boundary conditions are used. No mean gradients are present. The three components of the mean square velocity fluctuations are equal for the initial conditions chosen. The resulting solution shows characteristics of turbulence, such as the nonlinear excitation of small scale fluctuations. For the higher Reynolds numbers the initially nonrandom flow develops into an apparently random turbulence.

Deissler, R. G.↗