Search NASA⌕ Search

SEARCH · Search NASA

Results for “Streamers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

MHD Streamer Structure, Slow Solar Wind, and the Streamer Brightness Boundary

Flow tubes adjacent to closed magnetic field lines on the boundaries of streamers can have extremely large geometric spreading factors. Numerical models in this thin layer are subject to grid definition uncertainties. Therefore, we compute flow tube geometry using the analytic model of streamer structure described by Pneuman. This model has been found to be more widely applicable than commonly believed as a consequence of observations made with SOHO/UVCS and YOKHOH/SXT. We use the model to compute the radial dependence of flow tube geometry (the "spreading factors") for several different streamer models. The results are used to analyze the hypothesis that extremely slow flows in these open flow tubes may cause high densities relative to adjacent coronal hole flow. Such high density could mean that the streamer brightness boundary is defined by the open flow tubes adjacent to streamers rather than closed field lines.

Suess, Steven T.↗
NASA NTRS2005

Flow in Thin Streamer Boundaries, Streamer Stalks, and Plumes Between 2 and 10 Solar Radii

Slow solar wind is believed to arise in the legs or near the cusp of streamers, inside the brightness boundary. In an earlier study, we used an analytic model of flow in this layer to analyze the effect of the magnetic field on the geometry of the flow. That study successfully described those conditions that can lead to a decrease of the flow speed with increasing height near the cusp of the closed magnetic helmet inside the streamer. We have generalized that model to describe outflow in an arbitrarily thin layer inside the brightness boundary. The flow geometry now can also be constructive or divergent above the cusp and we show solutions of this type. A diverging streamer or ray above 2-3 solar radii is shown to indicate the plasma beta is greater than unity inside the streamer and less than unity outside. The same argument can be used to discover the height above which the plasma beta in plumes, inside coronal holes, is greater than unity.

Suess, S. T.↗
NASA NTRS2004

Flow In Streamer Boundaries, and Streamer Stability

Streamers can extend to many solar radii but the closed field regions, or helmets, reach no higher than 2-4 solar radii. The brightness boundary defining streamers is therefore a boundary between different flow regimes rather than between static plasma and expanding solar wind. It is reasonable to assume that this boundary divides fast coronal hole wind from slow wind. Flow inside this boundary can be studied using MHD models and is a type of stagnation flow. We describe such a model that is essentially analytic and show examples of flow solutions within the context and assumptions of the model. The flow affects the stability of the underlying helmet, which can be subject to a leakage out of the cusp that is similar to the small mass releases observed with the SOHO/LASCO coronagraph. It can also cause the helmet to be susceptible to being carried away in a coronal mass ejection. The model therefore also offers a way to study streamer stability.

Suess, S. T.↗
NASA NTRS2002

Flow in Streamer Boundaries and Streamer Stability

Streamers can extend to many solar radii but the closed field regions, or helmets, probably never reach higher than 2-4 solar radii. The brightness boundary defining streamers therefore is a boundary between different flow regimes rather than between static plasma and expanding solar wind. It is reasonable to assume that this boundary divides fast coronal hole wind from slow wind. Flow inside this boundary can be studied using simple MHD models and is a type of stagnation flow. We will present examples of what this flow can be like. The flow effects the stability of the underlying helmet, which can be subject to leakage out the cusp similar to the small mass releases observed with the SOHO/LASCO coronagraph. It can also cause the helmet to be more or less susceptible to being carried away in a coronal mass ejection.

Suess, S. T.↗
NASA NTRS1998

Streamer Evaporation

Evaporation is the consequence of slow plasma heating near the tops of streamers where the plasma is only weakly contained by the magnetic field. The form it takes is the slow opening of field lines at the top of the streamer and transient formation of new solar wind. It was discovered in polytropic model calculations, where due to the absence of other energy loss mechanisms in magnetostatic streamers, its ultimate endpoint is the complete evaporation of the streamer. This takes, for plausible heating rates, weeks to months in these models. Of course streamers do not behave this way, for more than one reason. One is that there are losses due to thermal conduction to the base of the streamer and radiation from the transition region. Another is that streamer heating must have a characteristic time constant and depend on the ambient physical conditions. We use our global Magnetohydrodynamics (MHD) model with thermal conduction to examine a few examples of the effect of changing the heating scale height and of making ad hoc choices for how the heating depends on ambient conditions. At the same time, we apply and extend the analytic model of streamers, which showed that streamers will be unable to contain plasma for temperatures near the cusp greater than about 2xl0(exp 6) K. Slow solar wind is observed to come from streamers through transient releases. A scenario for this that is consistent with the above physical process is that heating increases the near-cusp temperature until field lines there are forced open. The subsequent evacuation of the flux tubes by the newly forming slow wind decreases the temperature and heating until the flux tubes are able to reclose. Then, over a longer time scale, heating begins to again refill the flux tubes with plasma and increase the temperature until the cycle repeats itself. The calculations we report here are first steps towards quantitative evaluation of this scenario.

Suess, Steven T.↗
NASA NTRS1999

Beta in Streamers

Streamers are often described as regions of the corona in which the density is higher than in coronal holes because the plasma is trapped by closed loops of magnetic flux. In contrast, Magnetohydrodynamics (MHD) models of the global corona show that the plasma beta identically equal to 8(pi)p/B(exp 2) > 1 in streamers above approximately 1.2Rs heliocentric height (p=pressure, B=magnetic field strength). There are three recent contributions to this topic. The first is that heating near the cusp further drives Beta up and can result in release of new slow solar wind from the top of the streamer. The second is SOHO/UVCS observations, in combination with a potential field/source surface model of the magnetic field, show beta > 1 above 1.2Rs in a streamer observed near solar sunspot minimum. The third is a magnetic field reconstruction technique (using field deforming algorithms) which was applied both to an isolated active region (AR 7999) and to the Pneuman & Kopp global MHD model. In the active region, beta becomes larger than unity at approximately 1.2Rs. In the Pneuman & Kopp model, beta = 1.0 at the base of the streamer and rises with increasing height, becoming 15-20 at 1.6Rs and 35-55 at 1.7RS. The collective implication of these three results is that beta > 1 everywhere in streamers above approximately 1.2 Rs. Global simulations go on to show that the reason streamers do not simply explode under such high beta conditions is that they are held down by pressure from the sides due to the magnetic fields (and low beta) in adjacent coronal holes. The main role of the closed magnetic loops near the cusp is to keep the streamer from continuously leaking plasma, as otherwise happens in a magnetic pinch which is similar but has no closed loops. The purpose of this note is to summarize the results implying that beta > 1 is a general property of streamers above 1.2 Rs.

Suess, Steven T.↗
NASA NTRS1998

Beta in Streamers

Streamers are generally described as regions of the corona in which the density is higher than in coronal holes because the plasma is trapped by closed loops of magnetic flux. In contrast, MHD models of the global corona show the plasma beta in streamers above siml.2R_S (heliocentric). There are three recent contributions to this topic. The first is that heating near the cusp further drives beta up and results in release of new slow solar wind plasma from the top of the streamer. The second is SOHO/UVCS observations, in combination with a potential field/source surface model of the magnetic field, that show beta above 1.2R_S in a streamer observed near solar sunspot minimum. The third is a magnetic field reconstruction technique that uses field deforming algorithms and is more versatile for local fields than potential field models . The field reconstruction algorithm was applied to an isolated active region (AR 7999) and to the Pneuman Kopp global MHD model (beta has never been published for their model). In the active region, beta becomes larger than unity at siml.2 R_S. In the Pneuman & Kopp model, beta at the base of the streamer and rises with increasing height, becoming 15-20 at 1.6R_S and 35- 50 at 1.7R_S. Global simulations go on to show that the reason streamers do not simply explode under such high beta conditions is that they are held down by pressure from the sides due to the magnetic fields (and low beta) in adjacent coronal holes. The main role of the closed magnetic loop near the cusp is to keep the steamer from continuously leaking plasma, as otherwise happens in a magnetic pinch which is similar but has no closed loops. Awareness of MHD physical conditions in streamers is causing us to focus more attention on the details of the heating. On obvious suggestion is that heating is at much lower heights in streamers than in coronal holes. Also, energy which is directly delivered as momentum in coronal holes might all be deposited as heat in streamers.

Suess, Steven T.↗
NASA NTRS1981

The evolution of a coronal streamer and the photospheric magnetic field

A large equatorial coronal streamer observed in the outer corona grew in brightness and size during successive limb passages between October 6, 1973 and January 10, 1974 (solar rotations 1606-1611). Unlike previous studies of streamers and their photospheric associations, no definite surface feature could be identified in the present case. This suggests that the streamer is associated with the large scale photospheric magnetic field. Comparison of the streamer growth with observed underlying photospheric magnetic flux changes indicated that as the streamer increased in brightness, areal extent, and density, the photospheric magnetic flux decreased. Three possible explanations for the streamer's growth are presented, the conceptually simplest being that the decrease in photospheric field results in an opening of the flux tubes under the streamer, which permits an increase mass flux through the streamer.

Poland, A. I.↗
NASA NTRS2005

Nature and Variability of Coronal Streamers and their Relationship to the Slow Speed Wind

NASA Grant NAG5-12781 is a study on the "Nature and Variability of Coronal Streamers and their Relationship to the Slow Speed Wind." The two main goals of this study are to identify: 1) Where in the streamer structure does the solar wind originate, and 2) What coronal conditions are responsible for the variability of the slow speed wind. To answer the first question, we examined the mostly closed magnetic field regions in streamer cores to search for evidence of outflow. Preliminary results from the OVI Doppler dimming ratios indicates that most of the flow originates from the edges of coronal streamers but this idea should be confirmed by a comparison of the coronal plasma properties with in situ solar wind data. To answer the second question, the work performed thus far suggests that solar minimum streamers have larger perpendicular velocity distributions than do solar maximum streamers. If it can be shown that solar minimum streamers also produce higher solar wind speeds then this would suggest that streamers and coronal holes have similar solar wind acceleration mechanisms. The key to both questions lie in the analysis of the in situ solar wind data sets. This work was not able to be completed during the period of performance and therefore the grant was formally extended for an additional year at no cost to NASA. We hope to have final results and a publication by the end of the calendar year 2004. The SAO personnel involved in the research are Leonard Strachan (PI), Mari Paz Miralles, Alexander Panasyuk, and a Southern University student Michael Baham.

Strachan, Leonard↗
NASA NTRS2006

The Coronal-Dimming Footprint of a Streamer-Puff Coronal Mass Ejection: Confirmation of the Magnetic-Arch-Blowout Model

A streamer puff is a recently discovered variety of coronal mass ejection (CME) of narrow to moderate width. It (1) travels out along a streamer, transiently inflating the streamer but leaving it largely intact, and (2) occurs in step with a compact ejective flare in an outer flank of the base of the streamer. These aspects suggest the following magnetic-arch-blowout scenario for the production of these CMEs: the flare eruption expels a plasmoid that explodes up the leg of an outer loop of the arcade base of the streamer, blows out the top of this loop, and becomes the core of the CME. In this paper, we present a streamer-puff CME that produced a coronal dimming footprint. The coronal dimming, its magnetic setting, and the timing and magnetic setting of a strong compact ejective flare within the dimming footprint nicely confirm the magnetic-arch-blowout model. From these observations, together with several published cases of a trans-equatorial CME produced in tandem with an ejective flare or filament eruption that was far offset from directly under the CME, we propose that streamer-puff CMEs belong to a large class of "over-and-out" CMEs that are often much larger than streamer puffs but are similar to them in that they are produced by the blowout of a large quasi-potential magnetic arch by an ejective flare or filament eruption in one foot.

Moore, Ronald L.↗
NASA NTRS2007

The Coronal-Dimming Footprint of a Streamer-Puff Coronal Mass Ejection: Confirmation of the Magnetic-Arch-Blowout Scenario

A streamer puff is a recently identified variety of coronal mass ejection (CME) of narrow to moderate width. It (1) travels our along a streamer, transiently inflating the streamer but leaving it largely intact, and (2) occurs in step with a compact ejective flare in an outer flank of the base of the streamer. These aspects suggest the following magnetic-arch-blowout scenario for the production of these CMEs: the magnetic explosion that produces the flare also produces a plasmoid that explodes up the leg of an outer loop of the arcade base of the streamer, blows out the top of this loop, and becomes the core of the CME. In this paper, we present a streamer-puff CME that produced a coronal-dimming footprint. The coronal dimming, its magnetic setting, and the timing and magnetic setting of a strong compact ejective flare within the dimming footprint nicely confirm the magnetic-arch-blowout scenario. From these observations, together with several published cases of a trans-equatorial CME produced in tandem with an ejective flare or filament eruption that was far offset from directly under the CME, we propose the following. Streamer-puff CMEs are a subclass (one variety) of a broader class of "over-and-out" CMEs that are often much larger than streamer puffs but are similar to them in that they are produced by the blowout of a large quasi-potential magnetic arch by a magnetic explosion that erupts from one foot of the large arch, where it is marked by a filament eruption and/or an ejective flare.

Moore, Ronald L.↗
DOE OSTI2025

2D Modeling of Plasma Streamer and Glow Phases at Ammonia-Air Flame Conditions

Streamer and glow plasma phases have been modeled at two thermochemical states of an ammonia-air flame: fresh reactants and burnt products. A new AMReX-based solver has been verified against benchmarks in the literature and has been used to perform these simulations. A Helmholtz-equation based photoionization model with parameters accounting for the presence of NH3 in air has been coupled with the solver to accurately model the streamer propagation phase. A detailed plasma kinetics mechanism has been compiled and used to predict the evolution of electrons, excited states, ions, and radicals during streamer propagation and glow formation. The propagation velocity of streamers was found increase by almost two-fold when the mixture was changed from the fresh reactants to the burnt products. Moreover, vibrational excitation was found to be limited to the streamer body, whereas ionization predominantly occurred at the streamer head, as is expected. Finally, the differences in the pathways of O and H radical production during the streamer propagation and glow phases have been briefly discussed.

ammonia-air flame↗
NASA NTRS1996

Disruption of Helmet Streamers by Current Emergence

We have investigated the dynamic response of a coronal helmet streamer to the emergence from below of a current with its magnetic field in a direction opposite to the overlying streamer field. Once the emerging current moves into the closed region of the streamer, a current sheet forms between the emerging field and the streamer field, because the preexisting field and the newly emerging field have opposite polarities. Thus magnetic reconnection will occur at the flanks of the emerged structure where the current density is maximum. If the emerging current is large enough, the energy contained in the current and the reconnection will promptly disrupt the streamer. If the emerging current is small, the streamer will experience a stage of slow evolution. In this stage, slow magnetic reconnection occurring at the flanks of the emerged structure leads to the degeneration of the emerged current to a neutral point. Above this point, a new magnetic bubble will form. The resulting configuration resembles an inverse-polarity prominence. Depending on the initial input energy of the current, the resulting structure will either remain in situ, forming a quasi-static structure, or move upward, forming a coronal transient similar to coronal jets. The numerical method used in this paper can be used to construct helmet streamers containing a detached magnetic structure in their closed field region. The quasi-static solution may serve as a preevent corona for studying coronal mass ejection initiation.

Guo, W. P.↗
NASA NTRS1996

Disruption of Helmet Streamers by Current Emergence

We have investigated the dynamic response of a coronal helmet streamer to the emergence from below of a current with its magnetic field in a direction opposite to the overlying streamer field. Once the emerging current moves into the closed region of the streamer, a current sheet forms between the emerging field and the streamer field, because the preexisting field and the newly emerging field have opposite polarities. Thus magnetic reconnection will occur at the flanks of the emerged structure where the current density is maximum. If the emerging current is large enough, the energy contained in the current and the reconnection will promptly disrupt the streamer. If the emerging current is small, the streamer will experience a stage of slow evolution. In this stage, slow magnetic reconnection occurring at the flanks of the emerged structure leads to the degeneration of the emerged current to a neutral point. Above this point, a new magnetic bubble will form. The resulting configuration resembles an inverse-polarity prominence. Depending on the initial input energy of the current, the resulting structure will either remain in situ, forming a quasi-static structure, or move upward, forming a coronal transient similar to coronal jets. The numerical method used in this paper can be used to construct helmet streamers containing a detached magnetic structure in their closed field region. The quasi-static solution may serve as a preevent corona for studying coronal mass ejection initiation.

Guo, W. P.↗
DOE OSTI2026

Numerical-heating effects in atmospheric pressure streamer discharges simulated with a PIC code

Artificial heating in plasma simulations is a well-known phenomenon which occurs when, among other things, the Debye length is poorly resolved by the simulation mesh. Here, in this work, the degree to which numerical-heating occurs during a simulation of a nanosecond atmospheric pressure streamer discharge is examined. The streamer is simulated using a two-dimensional finite-element, particle-in-cell code Empire, which uses direct simulation Monte Carlo for binary particle interactions. Initially, an estimate of the numerical-heating rate applied to Empire is performed using a simple plasma model. Second, a positive atmospheric pressure streamer discharge simulation is performed to study the effects of numerical heating on plasma density, electron temperature, and streamer velocity. The nominal Debye length is approximately 1 μm and the amount of numerical heating introduced in the simulation is varied by using mesh sizes ranging from 2 μm to 20 μm. A measurable numerical heating quantity is proposed that can be used to estimate the appropriate element size and quantify the numerical-heating that can be expected over the simulation time for an atmospheric pressure streamer. In conclusion while Δx/λ D violations can be an issue it is not likely to be an issue with streamer discharges that are temporally short and occur in environments where collision frequencies are high. This result validates the rationale of grid size choices for a large amount of previously published works where Δx/λ D violation was not clearly addressed. Primary finding of this work is that numerical heating is of minor concern for plasma simulations where electron–neutral collisions are numerous such that multiple collisions can occur within a single plasma period.

Nikic, Dejan [University of New Mexico, Albuquerqu↗
NASA NTRS1974

Multiple contrail streamers observed by radar

An unusual case of multiple streamers or filaments with the characteristic mare's tail pattern in vertical section has been observed by radar where the generating elements were condensation trails laid by high-altitude aircraft. The contrails were laid perpendicular to the wind, and, as they drifted, a multitude of streamers formed along each trail. The streamers extended from 9 km to the ground. RHI and PPI photographs at X and S band taken over a 2-hr period show the three-dimensional shape of the streamers due to the wind shear. Doppler measurements were also taken. The resulting velocity spectra are very narrow indicating little or no turbulence. Reflectivity factors were measured at various altitudes and show a decrease in reflectivity with distance from the generating line. Fall velocities based on the slopes of the streamer patterns varied from 0.4 to 1.4 m/sec. In general, the characteristics of the precipitation streamers were quite similar to those previously measured in naturally occurring cloud forms such as cirrus uncinus.

Konrad, T. G.↗
NASA NTRS1978

Motions and mass changes of a persistent coronal streamer

The Skylab white light coronagraph observed a coronal streamer during five successive limb passages between June 1 and August 6, 1973. Measurements of the streamer's latitude, brightness and polarization during three east-limb passages show that: (1) the streamer's axis migrated southward from 25 deg N at first east-limb passage to 11 deg N at second east-limb passage to 8 deg N at third east-limb passage, (2) the streamer's mass and mass gradient with height varied by 20-50% from one east-limb passage to the next, (3) the streamer's longitudinal extent was observed to be less on successive east-limb passages, and (4) mass changes (distinct from coronal transients) occurring over hours were detected during at least two limb passages. The streamer was found to be associated with a complex of solar activity consisting of active regions and filaments.

Poland, A. I.↗