Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structured Programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Top down, bottom up structured programming and program structuring

New design and programming techniques for shuttle software. Based on previous Apollo experience, recommendations are made to apply top-down structured programming techniques to shuttle software. New software verification techniques for large software systems are recommended. HAL, the higher order language selected for the shuttle flight code, is discussed and found to be adequate for implementing these techniques. Recommendations are made to apply the workable combination of top-down, bottom-up methods in the management of shuttle software. Program structuring is discussed relevant to both programming and management techniques.

Hamilton, M.↗

Programing Structural Synthesis System

Program aids research in analysis and optimization. Programing Structural Synthesis System (PROSSS2) developed to provide structural-synthesis capability by combining access to SPAR with CONMIN program and set of interface procedures. SPAR is large general-purpose finite-element structural-analysis program, and CONMIN is large general-purpose optimization program. PROSSS2 written in FORTRAN IV for batch execution.

Rogers, James L., Jr.↗

An Overview: NASA LeRC Structures Programs

A workshop on National Structures Programs was held, jointly sponsored by the AIAA Structures Technical Committee, the University of Virginia's Center for Advanced Computational Technology and NASA. The Objectives of the Workshop were to: provide a forum for discussion of current Government-sponsored programs in the structures area; identify high potential research areas for future aerospace systems; and initiate suitable interaction mechanisms with the managers of structures programs. The presentations covered structures programs at NASA, DOD (AFOSR, ONR, ARO and DARPA), and DOE. This publication is the presentation of the Structures and Acoustics Division of the NASA Lewis Research Center. The Structures and Acoustics Division has its genesis dating back to 1943. It is responsible for NASA research related to rotating structures and structural hot sections of both airbreathing and rocket engines. The work of the division encompasses but is not limited to aeroelasticity, structural life prediction and reliability, fatigue and fracture, mechanical components such as bearings, gears, and seals, and aeroacoustics. These programs are discussed and the names of responsible individuals are provided for future reference.

Zaretsky, Erwin V.↗

Structured programming: Principles, notation, procedure

Structured programs are best represented using a notation which gives a clear representation of the block encapsulation. In this report, a set of symbols which can be used until binding directives are republished is suggested. Structured programming also allows a new method of procedure for design and testing. Programs can be designed top down, that is, they can start at the highest program plane and can penetrate to the lowest plane by step-wise refinements. The testing methodology also is adapted to this procedure. First, the highest program plane is tested, and the programs which are not yet finished in the next lower plane are represented by so-called dummies. They are gradually replaced by the real programs.

JOST↗

An Overview-NASA LeRC Structures Program

The Structures and Acoustics Division of the NASA Lewis Research Center has its genesis dating back to 1943. It has been an independent Division at Lewis since 1979. Its two primary capabilities are performance and life analysis of static and dynamic systems such as those found in aircraft and spacecraft propulsion systems and experimental verification of these analyses. Research is conducted in-house, through university grants and contracts, and through cooperative programs with industry. Our work directly supports NASA's Advanced Subsonic Technology (AST), Smart Green Engine, Fast Quiet Engine, High-Temperature Materials and Processing (HiTEMP), Hybrid Hyperspeed Propulsion, Rotorcraft, High-Speed Research (HSR), and Aviation Safety Program (AvSP). A general overview is given discussing these programs and other technologies that are being developed at NASA LeRC.

Zaretsky, Erwin V.↗

An implementation of the programming structural synthesis system (PROSSS)

A particular implementation of the programming structural synthesis system (PROSSS) is described. This software system combines a state of the art optimization program, a production level structural analysis program, and user supplied, problem dependent interface programs. These programs are combined using standard command language features existing in modern computer operating systems. PROSSS is explained in general with respect to this implementation along with the steps for the preparation of the programs and input data. Each component of the system is described in detail with annotated listings for clarification. The components include options, procedures, programs and subroutines, and data files as they pertain to this implementation. An example exercising each option in this implementation to allow the user to anticipate the type of results that might be expected is presented.

Rogers, J. L., Jr.↗

STRCMACS: An extensive set of Macros for structured programming in OS/360 assembly language

Two techniques are discussed that have been most often referred to as structured programming. One is that of programming with high level control structures (such as the if and while) replacing the branch instruction (goto-less programming); the other is the process of developing a program by progressively refining descriptions of components in terms of more primitive components (called stepwise refinement or top-down programming). In addition to discussing what these techniques are, it is shown why their use is advised and how both can be implemented in OS assembly language by the use of a special macro instruction package.

Barth, C. W.↗

(abstract) Overview of NASA's Adaptive Structures Program

NASA's research program in Adaptive Structures was initiated seven years ago to provide the technology required for large (20-50 meters in dimension) precision (submicron) structures for observations from space. The current approach of designing thermally stable passive structures cannot meet the requirements and moreover the systems cannot be validated by ground tests. Adaptive Structures provides the capability to adjust the quasistatic dimensions of the structures, preload joints, add active damping, and provide the actuation forces necessary to attenuate the undesired dynamic motions. The technology is applicable to space platforms with various pointing instruments as well as for microspacecraft. This technology has been incorporated as part of a small Active Fold Mirror on the Wide Field Planetary Camera to be flown within the year to correct the optical errors in the Hubble Telescope. Highlights of NASA's Adaptive Structures research and applications will be presented along with future technology and research requirements for both small inexpensive spacecraft and large precision systems.

adaptive↗

An implementation of the distributed programming structural synthesis system (PROSSS)

A method is described for implementing a flexible software system that combines large, complex programs with small, user-supplied, problem-dependent programs and that distributes their execution between a mainframe and a minicomputer. The Programming Structural Synthesis System (PROSSS) was the specific software system considered. The results of such distributed implementation are flexibility of the optimization procedure organization and versatility of the formulation of constraints and design variables.

Rogers, J. L., Jr.↗

Overview of NASA's Adaptive Structures program

NASA's recent progress in Adaptive Structures is reviewed using results from both experimental and flight hardware test programs. Particular attention is given to testbeds, structural deployment/assembly, structural linearization, static shape/position adjustment, on-orbit system identification, and vibration suppression. It is concluded that a very rapid transition of research in Adaptive Structures to applications has occurred in the past five years. Adaptive Structures provide tools for increasing the robustness of structural design.

Venneri, S. L.↗

Program Structure Combines Segmentation and Dynamic Storage

Programing techniques incorporate advantages of overlaying into segmented loads while retaining all dynamic load advantages of segmentation, employing those capabilities that best suit mode of operation, whether batch or interactive. User is allowed to load a program automatically in a variable manner, based solely on a single data input to the program, to maintain minimal field lengths for interactive use.

Tiffany, S. H.↗

A historical perspective of the YF-12A thermal loads and structures program

Around 1970, the Y-F-12A loads and structures efforts focused on numerous technological issues that needed defining with regard to aircraft that incorporate hot structures in the design. Laboratory structural heating test technology with infrared systems was largely created during this program. The program demonstrated the ability to duplicate the complex flight temperatures of an advanced supersonic airplane in a ground-based laboratory. The ability to heat and load an advanced operational aircraft in a laboratory at high temperatures and return it to flight status without adverse effects was demonstrated. The technology associated with measuring loads with strain gages on a hot structure was demonstrated with a thermal calibration concept. The results demonstrated that the thermal stresses were significant although the airplane was designed to reduce thermal stresses. Considerable modeling detail was required to predict the heat transfer and the corresponding structural characteristics. The overall YF-12A research effort was particularly productive, and a great deal of flight, laboratory, test and computational data were produced and cross-correlated.

Jenkins, Jerald M.↗

Overview of NASA's Adaptive Structures Program

The paper reviews NASA's research program, flight experiments, and flight application related to Adaptive Structures. Emphasis is placed on results from both experimental and flight hardware test programs that helps validate its theoretical performance. The paper includes the role of Adaptive Structures to meet NASA's current and future technology and programmatic needs.

adaptive↗

RTMPL: A structured programming and documentation utility for real-time multiprocessor simulations

The NASA Lewis Research Center is developing and evaluating experimental hardware and software systems to help meet future needs for real time simulations of air-breathing propulsion systems. The Real Time Multiprocessor Simulator (RTMPS) project is aimed at developing a prototype simulator system that uses multiple microprocessors to achieve the desired computing speed and accuracy at relatively low cost. Software utilities are being developed to provide engineering-level programming and interactive operation of the simulator. Two major software development efforts were undertaken in the RTMPS project. A real time multiprocessor operating system was developed to provide for interactive operation of the simulator. The second effort was aimed at developing a structured, high-level, engineering-oriented programming language and translator that would facilitate the programming of the simulator. The Real Time Multiprocessor Programming Language (RTMPL) allows the user to describe simulation tasks for each processor in a straight-forward, structured manner. The RTMPL utility acts as an assembly language programmer, translating the high-level simulation description into time-efficient assembly language code for the processors. The utility sets up all of the interfaces between the simulator hardware, firmware, and operating system.

Arpasi, D. J.↗

High Speed Research Program Structural Acoustics Multi-Year Summary Report

This report summarizes the work conducted by the Structural Acoustics Integrated Technology Development (ITD) Team under NASA's High Speed Research (HSR) Phase II program from 1993 to 1999. It is intended to serve as a reference for future researchers by documenting the results of the interior noise and sonic fatigue technology development activities conducted during this period. For interior noise, these activities included excitation modeling, structural acoustic response modeling, development of passive treatments and active controls, and prediction of interior noise. For sonic fatigue, these activities included loads prediction, materials characterization, sonic fatigue code development, development of response reduction techniques, and generation of sonic fatigue design requirements. Also included are lessons learned and recommendations for future work.

Beier, Theodor H.↗

The automated strength-aeroelastic design of aerospace structures program

An ongoing program whose goal is to develop an automated procedure that can assist in the preliminary design of aircraft and space structures is described. The approach and capabilities that are to be included in the final procedures are descussed. By using proven engineering software as a basis for the project, a reliable and interdisciplinary procedure is developed. The use of a control language for module sequencing and execution permits efficient development of the procedure and gives the user significant flexibility in altering or enhancing the procedure. The data base system provides reliable and efficient access to the large amounts of interrelated data required in an enterprise of this sort. In addition, the data base allows interfacing with existing pre- and post-processors in an almost trivial manner. Altogether, the procedure promises to be of considerable utility to preliminary structural design teams.

Johnson, E. H.↗