Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sulfate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Stratigraphic Change from Ca-Sulfate to Mg-Sulfate in the Sedimentary Bedrock of Gale Crater, Mars: Recent Results from Curiosity’s APXS

Curiosity’s APXS instrument has been quantifying sulfates over >30 km of traverse in Gale crater. The rover recently arrived at sedimentary strata where orbital data predicted hydrated Mg-sulfates that may record a change to a drier paleoenvironment. The sequence of strata is in the Marker Band Valley (MBV), the ~10-m-thick, metal-rich Marker Band (MB), and strata above the MB. Here, we report recent sulfate observations by the APXS and provide constraints on the occurrence of Mg-sulfate and the implications for paleoenvironment interpretations. In sedimentary strata below the MBV, Mg-sulfate enrichment (~5-10 wt%) is generally limited to larger diagenetic nodules (~1-3 cm). Ca is positively correlated with S at proportions consistent with Ca-sulfate addition to the bedrock matrix. S variation is thus controlled primarily by Ca-sulfate, which increases ~30% in transitional units below the MBV. The MBV contains the first evidence of Mg-sulfate enrichment in the bedrock matrix, confirmed by the detection of crystalline Mg-sulfate by CheMin. The MBV bedrock has the same overall bulk composition as the underlying Mt. Sharp gp. strata, but with an additional ~5-15 wt% Mg-sulfate. The MB has contrasting sulfate content: (1) targets with very high concentrations of MnO (1.5 wt%), FeO (47 wt%), and Zn (2.2 wt%) are depleted in S and (2) targets with lower metal content have evidence of Mg-sulfate addition. Strata above the MB have a bulk composition that is distinct from other rocks in Gale. For example, the bedrock has molar Fe/Mn (50-60) and Cr/Ti (0.4-0.7) similar to basaltic soil, but ~3X higher Zn and high Ge (50 ppm). Median SO3 above the MB (15 wt%) is higher than the MBV (14 wt%) as well as strata below the MBV (~8 wt%). S does not correlate with Ca or Mg above the MBV. MgO (~9 wt%) is higher than below the MBV (~5 wt%) and the SO3/MgO (1.7) is in the same range as the Mg-sulfate-bearing MBV, suggesting Mg-sulfate enrichment. APXS data indicate that the MBV and above the MB preserve a relatively sharp vertical transition (~5-10 m) from Ca-sulfate to Mg-sulfate in the rock matrix. The sharp contacts with the sulfate-depleted MB and the notable change in bulk composition above the MB may indicate a complex depositional and/or diagenetic history under conditions where enrichments in the highly soluble Mg-sulfates were ultimately preserved.

Jeffrey Allan Berger↗
NASA NTRS2006

Laboratory Simulated Acid-Sulfate Weathering of Basaltic Materials: Implications for Formation of Sulfates at Meridiani Planum and Gusev Crater, Mars

Acid-sulfate weathering of basaltic materials is a candidate formation process for the sulfate-rich outcrops and rocks at the MER rover Opportunity and Spirit landing sites. To determine the style of acid-sulfate weathering on Mars, we weathered basaltic materials (olivine-rich glassy basaltic sand and plagioclase feldspar-rich basaltic tephra) in the laboratory under different oxidative, acid-sulfate conditions and characterized the alteration products. We investigated alteration by (1) sulfuric-acid vapor (acid fog), (2) three-step hydrothermal leaching treatment approximating an open system and (3) single-step hydrothermal batch treatment approximating a "closed system." In acid fog experiments, Al, Fe, and Ca sulfates and amorphous silica formed from plagioclase-rich tephra, and Mg and Ca sulfates and amorphous silica formed from the olivine-rich sands. In three-step leaching experiments, only amorphous Si formed from the plagioclase-rich basaltic tephra, and jarosite, Mg and Ca sulfates and amorphous silica formed from olivine-rich basaltic sand. Amorphous silica formed under single-step experiments for both starting materials. Based upon our experiments, jarosite formation in Meridiani outcrop is potential evidence for an open system acid-sulfate weathering regime. Waters rich in sulfuric acid percolated through basaltic sediment, dissolving basaltic phases (e.g., olivine) and forming jarosite, other sulfates, and iron oxides. Aqueous alteration of outcrops and rocks on the West Spur of the Columbia Hills may have occurred when vapors rich in SO2 from volcanic sources reacted with basaltic materials. Soluble ions from the host rock (e.g., olivine) reacted with S to form Ca-, Mg-, and other sulfates along with iron oxides and oxyhydroxides.

Golden, D. C.↗
DOE OSTI2024

Formation of Inorganic Sulfate and Volatile Nonsulfated Products from Heterogeneous Hydroxyl Radical Oxidation of 2-Methyltetrol Sulfate Aerosols: Mechanisms and Atmospheric Implications

Chemical transformation of 2-methyltetrol sulfates (2-MTS), key isoprene-derived secondary organic aerosol (SOA) constituents, through heterogeneous hydroxyl radical ( • OH) oxidation can result in the formation of previously unidentified atmospheric organosulfates (OSs). However, detected OSs cannot fully account for the sulfur content released from reacted 2-MTS, indicating the existence of sulfur in forms other than OSs, such as inorganic sulfates. This work investigated the formation of inorganic sulfates through heterogeneous • OH oxidation of 2-MTS aerosols. Remarkably, high yields of inorganic sulfates, defined as the moles of inorganic sulfates produced per mole of reacted 2-MTS, were observed in the range from 0.48 ± 0.07 to 0.68 ± 0.07. These could be explained by the production of sulfate (SO 4 •- ) and sulfite (SO 3 •- ) radicals through the cleavage of C-O(S) and (C)O-S bonds, followed by aerosol-phase reactions. Additionally, non-sulfated products resulting from bond cleavage were likely volatile and evaporated into gas phase, as evidenced by observed aerosol mass loss (up to 25%) and concurrent size reduction upon oxidation. This investigation highlights the significant transformation of sulfur from its organic to inorganic forms during the heterogeneous oxidation of 2-MTS aerosols, potentially influencing the physicochemical properties and environmental impacts of isoprene-derived SOA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Stimulation of Dissimilatory Sulfate Reduction in Response to Sulfate in Microcosm Incubations from Two Contrasting Temperate Peatlands near Ithaca, NY, USA

Abstract Peatlands are responsible for over half of wetland methane emissions, yet major uncertainties remain regarding carbon flow, especially when increased availability of electron acceptors stimulate competing physiologies. We used microcosm incubations to study the effects of sulfate on microorganisms in two temperate peatlands, one bog and one fen. Three different electron donor treatments were used (13C-acetate, 13C-formate, and a mixture of 12C short-chain fatty acids) to elucidate the responses of sulfate-reducing bacteria (SRB) and methanogens to sulfate stimulation. Methane production was measured and metagenomic sequencing was performed, with only the heavy DNA fraction sequenced from treatments receiving 13C electron donors. Our data demonstrate stimulation of dissimilatory sulfate reduction in both sites, with contrasting community responses. In McLean Bog (MB), hydrogenotrophic Deltaproteobacteria and acetotrophic Peptococcaceae lineages of SRB were stimulated, as were lineages with unclassified dissimilatory sulfite reductases. In Michigan Hollow Fen (MHF), there was little stimulation of Peptococcaceae populations, and a small stimulation of Deltaproteobacteria SRB populations only in the presence of formate as electron donor. Sulfate stimulated an increase in relative abundance of reads for both oxidative and reductive sulfite reductases, suggesting stimulation of an internal sulfur cycle. Together, these data indicate a stimulation of SRB activity in response to sulfate in both sites, with a stronger growth response in MB than MHF. This study provides valuable insights into microbial community responses to sulfate in temperate peatlands and is an important first step to understanding how SRB and methanogens compete to regulate carbon flow in these systems.

Microbiology↗
NASA NTRS2002

Rationally designed fluorescently labeled sulfate-binding protein mutants: evaluation in the development of a sensing system for sulfate

Periplasmic binding proteins from E. coli undergo large conformational changes upon binding their respective ligands. By attaching a fluorescent probe at rationally selected unique sites on the protein, these conformational changes in the protein can be monitored by measuring the changes in fluorescence intensity of the probe which allow the development of reagentless sensing systems for their corresponding ligands. In this work, we evaluated several sites on bacterial periplasmic sulfate-binding protein (SBP) for attachment of a fluorescent probe and rationally designed a reagentless sensing system for sulfate. Eight different mutants of SBP were prepared by employing the polymerase chain reaction (PCR) to introduce a unique cysteine residue at a specific location on the protein. The sites Gly55, Ser90, Ser129, Ala140, Leu145, Ser171, Val181, and Gly186 were chosen for mutagenesis by studying the three-dimensional X-ray crystal structure of SBP. An environment-sensitive fluorescent probe (MDCC) was then attached site-specifically to the protein through the sulfhydryl group of the unique cysteine residue introduced. Each fluorescent probe-conjugated SBP mutant was characterized in terms of its fluorescence properties and Ser171 was determined to be the best site for the attachment of the fluorescent probe that would allow for the development of a reagentless sensing system for sulfate. Three different environment-sensitive fluorescent probes (1,5-IAEDANS, MDCC, and acylodan) were studied with the SBP171 mutant protein. A calibration curve for sulfate was constructed using the labeled protein and relating the change in the fluorescence intensity with the amount of sulfate present in the sample. The detection limit for sulfate was found to be in the submicromolar range using this system. The selectivity of the sensing system was demonstrated by evaluating its response to other anions. A fast and selective sensing system with detection limits for sulfate in the submicromolar range was developed. Copyright 2002 Wiley Periodicals, Inc. Biotechnol Bioeng 78: 517-526, 2002.

Evaluation Studies↗
DOE OSTI2022

Degradation mechanism of blended cement pastes in sulfate-bearing environments under applied electric fields: Sulfate attack vs. decalcification

Applied electric fields, the reason behind stray currents, accelerate the ingress of sulfate into cementitious materials. To identify mitigation approaches, this study investigates the effects of slag and fly ash on sodium sulfate attacks of cement pastes under a constant electric current. The mineralogical alterations induced by the attacks were analyzed using X-ray diffractometry, thermogravimetric analysis, scanning electron microscopy, and thermodynamic modeling. The dissolution of aluminates in the slag and fly ash induced a monosulfate-rich area (>~20 mm from the cathode surface) to form next to the ettringite-rich area on the sample surface (<~20 mm). This effect reduced the availability of SO 4 2– in the pore solution, thereby hindering the penetration of sulfate. Meanwhile, the consumption of portlandite by the pozzolanic reaction lowered the decalcification resistance of the materials. This produced a wide area that endured the decomposition of portlandite and carbonate-AFm. Altogether, blending 30% fly ash did not improve the resistance of the material to either sulfate attacks or decalcification; blending 50% slag can effectively mitigate sulfate ingress, though decalcification may become a governing mechanism in the degradation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Thermal Emission Spectroscopy of Sulfates: Possible Hydrous Iron-Sulfate in the Soil at the MER-A Gusev Crater Landing Site

Sulfates are likely to be present on Mars as indicated by the sulfur abundances measured at the Viking and Pathfinder landing sites (approx. 5-10% by weight SO3) [1-3] and because of Mars strongly oxidizing environment. Telescopic observations of Mars tentatively identified weak sulfate bands in near infrared [4] and thermal infrared [5] data. The currently orbiting midinfrared instruments (TES, THEMIS) and the Mini-TES on the Mars Exploration Rover landers may enable a positive identification [6] and determination of the chemistry of the sulfates. Critically important to the identification of these minerals is the presence of their spectra in a spectral library. There exist approximately 370 sulfate-mineral species [7]. Sulfate minerals occur in volcanic, hydrothermal, evaporitic, and chemical-weathering environments.

Lane, Melissa D.↗
DOE OSTI2021

Sulfate adenylyl transferase kinetics and mechanisms of metabolic inhibitors of microbial sulfate respiration

Abstract Sulfate analog oxyanions that function as selective metabolic inhibitors of dissimilatory sulfate reducing microorganisms (SRM) are widely used in ecological studies and industrial applications. As such, it is important to understand the mode of action and mechanisms of tolerance or adaptation to these compounds. Different oxyanions vary widely in their inhibitory potency and mechanism of inhibition, but current evidence suggests that the sulfate adenylyl transferase/ATP sulfurylase (Sat) enzyme is an important target. We heterologously expressed and purified the Sat from the model SRM, Desulfovibrio alaskensis G20. With this enzyme we determined the turnover kinetics (kcat, KM) for alternative substrates (molybdate, selenate, arsenate, monofluorophosphate, and chromate) and inhibition constants (KI) for competitive inhibitors (perchlorate, chlorate, and nitrate). These measurements enable the first quantitative comparisons of these compounds as substrates or inhibitors of a purified Sat from a respiratory sulfate reducer. We compare predicted half-maximal inhibitory concentrations (IC50) based on Sat kinetics with measured IC50 values against D. alaskensis G20 growth and discuss our results in light of known mechanisms of sensitivity or resistance to oxyanions. This analysis helps with the interpretation of recent adaptive laboratory evolution studies and illustrates the value of interpreting gene–microbe–environment interactions through the lens of enzyme kinetics.

Carlson, Hans K. (ORCID:0000000215835313)↗
NASA NTRS1992

Stratospheric sulfate aerosol in and near the Northern Hemisphere polar vortex - The morphology of the sulfate layer, multimodal size distributions, and the effect of denitrification

Measurements were made of stratospheric sulfate aerosols using a passive cavity aerosol spectrometer and a condensation nucleus counter on a NASA ER-2 aircraft in the Airborne Arctic Stratospheric Experiment of 1989. The problems of representative and accurate sampling and particle evaporation were explicitly addressed in the design of the inlets and reduction of the data. The measurements suggest that the sulfate aerosol is bimodal in the polar vortex above the mass mixing ratio maximum in the sulfate layer. It appears that a nuclei mode of small, newly formed particles exists in this region. A stronger case is made for a nuclei mode in the upper few kilometers of the troposphere and in the lower few kilometers of the stratosphere. This mode is probably a global phenomenon occurring in all seasons. Comparison of denitrified and nondenitrified air suggests that denitrification removes some of the larger sulfate particles.

Wilson, J. G.↗
DOE OSTI2023

Understanding the Effect of Single Atom Cationic Defect Sites in an Al 2 O 3 (012) Surface on Altering Selenate and Sulfate Adsorption: An Ab Initio Study

Adsorption is a promising under-the-sink selenate remediation technique for distributed water systems. Recently it was shown that adsorption induced water network rearrangement control adsorption energetics on the α-Al 2 O 3 (012) surface. Here, we aim to elucidate the relative importance of the water network effects and surface cation identity on controlling selenate and sulfate adsorption energy using density functional theory calculations. Density functional theory (DFT) calculations predicted the adsorption energies of selenate and sulfate on nine transition metal cations (Sc–Cu) and two alkali metal cations (Ga and In) in the α-Al 2 O 3 (012) surface under simulated acidic and neutral pH conditions. We find that the water network effects had a larger impact on the adsorption energy than the cationic identity. However, cation identity secondarily controlled adsorption. Most cations decreased the adsorption energy, weakening the overall performance, the larger Sc and In cations enabled inner-sphere adsorption in acidic conditions because they relaxed outward from the surface, providing more space for adsorption. Additionally, only Ti induced Se selectivity over S by reducing the adsorbing selenate to selenite but not reducing the sulfate. Altogether, this study indicates that tuning water network structure will likely have a larger impact than tuning cation–selenate interactions for increasing adsorbate effectiveness.

Adsorption↗
DOE OSTI2021

Novel lamprey antibody recognizes terminal sulfated galactose epitopes on mammalian glycoproteins

The terminal galactose residues of N- and O-glycans in animal glycoproteins are often sialylated and/or fucosylated, but sulfation, such as 3-O-sulfated galactose (3-O-SGal), represents an additional, but poorly understood modification. To this end, we have developed a novel sea lamprey variable lymphocyte receptor (VLR) termed O6 to explore 3-O-SGal expression. O6 was engineered as a recombinant murine IgG chimera and its specificity and affinity to the 3-O-SGal epitope was defined using a variety of approaches, including glycan and glycoprotein microarray analyses, isothermal calorimetry, ligand-bound crystal structure, FACS, and immunohistochemistry of human tissue macroarrays. 3-O-SGal is expressed on N-glycans of many plasma and tissue glycoproteins, but recognition by O6 is often masked by sialic acid and thus exposed by treatment with neuraminidase. O6 recognizes many human tissues, consistent with expression of the cognate sulfotransferases (GAL3ST-2 and GAL3ST-3). The availability of O6 for exploring 3-O-SGal expression could lead to new biomarkers for disease and aid in understanding the functional roles of terminal modifications of glycans and relationships between terminal sulfation, sialylation and fucosylation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Understanding supercooling mechanism in sodium sulfate decahydrate phase-change material

Salt hydrate-based phase-change materials are considered promising for future heat storage applications in residential heating/cooling systems. Smooth phase transition from the liquid to solid phase and vice versa is essential for effective heat exchanger; however, supercooling in salt hydrates delays the onset of liquid–solid phase transition. We investigate the molecular level mechanism of supercooling in sodium sulfate decahydrate (SSD). SSD is a complex salt hydrate whose properties are governed by electrostatic forces that include pure Coulombic interactions as well as hydrogen bonds. Experimentally, we examine the importance of a nucleator in reducing supercooling temperatures. We investigated the effect of various mass concentrations of a borax nucleator on a decrease of supercooling temperatures. Molecular dynamics simulation techniques are used to obtain a basic understanding of supercooling in SSD. We observe that by introducing borax as a nucleator, there is a decrease in the supercooling temperature before nucleation. Our molecular dynamics simulations show that long-range electrostatics between sodium and sulfate ion pairs and that with polar water molecules is responsible for delayed nucleation in SSD that results in supercooling, and also, dynamics of charged molecules slows down. The lack of crystallization leads to amorphous structures in supercooled SSD.

36 MATERIALS SCIENCE↗
NASA NTRS2017

Acid-Sulfate Alteration at Gusev Crater and Across Mars: High-SiO2 Residues and Ferric Sulfate Precipitates

The Mars Exploration Rover Spirit ended its mission in Gusev crater on sol 2210 after it had become stuck in a deposit of fined-grained and sulfate rich soil with dust covered solar panels unfavorably pointed toward the sun. Final analysis of remaining data from Spirit's Moessbauer spectrometer (Fe redox and mineralogy) for sols 1529 through 2071 is now complete. We focus here on chemical (APXS) and MB data for targets having high-SiO2 or high-SO3 and process link the targets through mixing and geochemical modelling to an acid-sulfate system centered at Home Plate, which is considered to be a hydrovolcanic complex.

Morris, R. V.↗
DOE OSTI2023

Polypropylene Degradation Catalyzed by Tantalum Hydrides Supported on Sulfated Alumina

Ta–H + sites supported on sulfated aluminum oxide (SAO), [Ta(H) 2 (O–) 2 ][SAO] (1), catalyze the hydrogenolysis of isotactic polypropylene (iPP, M n = 13.3 kDa; D = 2.4; mmmm = 94%) to form low-molecular-weight branched alkanes (C 11 –C 30 ) in good yields (70%). Here, the alkanes formed lose stereochemical information originating from iPP, but residual iPP remains highly isotactic. In the presence of D 2 , similar mixtures of alkanes are formed containing –CH 3–x D x , –CHD, and –CD–. Residual iPP maintains high tacticity and incorporates deuterium primarily into –CH 3 groups of the polymer (–CH 3–x D x /–CHD–/–CD– ~10:1:0). 1 reacts with pinacolborane to form [TaH(κ 2 -H 2 BPin)(O–) 2 ][SAO] (2). At 200 °C in an iPP melt, 2 reacts to form products indicative of C–H bond activation at –CH 3 groups and internal –CH 2 – groups in iPP in a ~1:3 ratio, indicating a slight kinetic preference for C–H bond activation at internal –CH 2 – groups. 1 is more reactive toward iPP than high-density polyethylene in hydrogenolysis reactions

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗