Search NASA⌕ Search

SEARCH · Search NASA

Results for “Superconducting properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The nontrivial effects of annealing on superconducting properties of Nb single crystals

The effect of annealing on the superconducting properties of niobium single crystals was studied using optical, magnetic, and scanning tunneling microscopy (STM) methods. Pieces of the same crystal boule were studied before and after the annealing at 800 ${^\circ}\textrm{C}$, 1400 ${^\circ}\textrm{C}$, and near the melting point of niobium (2477 ${^\circ}\textrm{C}$). The initial samples had a high hydrogen content and low-temperature imaging revealed large hydrides (hundreds of micrometers) appearing below 190 K. The formation of these large precipitates is already completely suppressed by annealing at 800 ${^\circ}\textrm{C}$. However, the overall superconducting properties of the annealed samples did not improve and, in fact, worsened. In particular, the superconducting transition temperature decreased, the upper critical field increased, and the pinning strength increased. In the STM study, the sample was annealed initially at 400 ${^\circ}\textrm{C}$, measured, annealed at 1700 ${^\circ}\textrm{C}$, and measured again. The STM revealed a ‘dirty’ superconducting gap with a significant spatial variation in tunneling conductance after annealing at 400 ${^\circ}\textrm{C}$. The clean gap was recovered after annealing at 1700 ${^\circ}\textrm{C}$. This is likely due to oxygen redistribution near the surface, which is always covered by oxide layers in as-grown crystals. Our results indicate that vacuum annealing at least up to 1400 ${^\circ}\textrm{C}$, while removing a large percentage of hydrogen, introduces additional nanosized defects, likely hydride precipitates, that act as efficient pair-breaking and pinning centers. The dimensionless scattering rate is estimated to have increased from $\Gamma = 0.2$ to about $\Gamma = 0.4$ after annealing at 1400 ${^\circ}\textrm{C}$. These results on single crystals differ drastically from those obtained in polycrystalline bulk niobium (i.e. cut from superconducting radio-frequency cavities), where annealing is known to have a significant positive effect that is attributed to the improvement of the crystalline structure masking the more subtle influence of the hydrides.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Cryogenic growth of aluminum: Structural morphology, optical properties, superconductivity, and microwave dielectric loss

We explore the molecular beam epitaxy synthesis of superconducting aluminum thin films grown on c-plane sapphire substrates at cryogenic temperatures of 6 K and compare their behavior with films synthesized at room temperature. We demonstrate that cryogenic growth increases structural disorder, producing crystalline grains that modify the optical, electrical, and superconducting properties of aluminum. We observe that cryogenic deposition changes the color of aluminum from fully reflective to yellow and correlate the pseudodielectric function and reflectance with structural changes in the film. We find that smaller grain sizes enhance the superconductivity of aluminum, increasing its critical temperature and critical field. We then estimate the superconducting gap and coherence length of Cooper pairs in aluminum in the presence of disorder. In conclusion, we fabricate superconducting microwave resonators on these films and find that, independently of the growth temperature, the system is dominated by two-level system loss with similar quality factors in the high- and low-power regimes. We further measure a higher kinetic inductance in the cryogenically grown films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Signatures of enhanced superconducting properties in niobium cavities

Superconducting radio-frequency (SRF) niobium cavities are critical for modern particle accelerators, as well as for advancing superconducting quantum systems and enabling ultrasensitive searches for new physics. In this work, we report a systematic observation of an anomalous frequency dip in Nb cavities, which occurs at temperatures just below the critical temperature (𝑇𝑐 ), indicative of enhanced superconducting properties at 𝑇 ≪ 𝑇 𝑐 . The magnitude of this dip is strongly correlated with the rf surface resistance, impurity distribution near the surface, and 𝑇𝑐 . Additionally, we report measurements of the coherence peak in the ac conductivity of two Nb SRF cavities processed using distinct methods. By comparing recent theories developed to model this experimental data, we show that the frequency-dip feature, larger coherence peak height, and reduction in the temperature-dependent surface resistance with rf current occur at minimal but finite levels of disorder.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

What causes the variation in superconducting properties of UTe 2 ?

Reaching a consensus on the superconducting order parameter of unconventional superconductors remains a central challenge in the field of magnetically-mediated superconductivity. Though UTe 2 is largely accepted as a rare example of an odd-parity superconductor, its precise order parameter remains highly debated, even at ambient conditions. A key underlying issue is the large sample-to-sample variation in superconducting properties at zero applied pressure and magnetic field. Here, we investigate the origin of the observed variation by means of single crystal x-ray diffraction (SC-XRD) and scanning transmission electron microscopy (STEM) measurements. Our results reveal highly ordered crystalline lattices, in agreement with the expected Immm structure, and no signs of uranium vacancies. Tiny amounts of interstitial defects, however, are observed on the Te2 layers that host Te chains along the b axis. We argue that these defects give rise to slightly enhanced atomic displacement parameters observed in SC-XRD data and are enough to disrupt the unconventional superconducting state in UTe 2 . Our findings highlight the need to focus future order parameter determination efforts on single crystals of UTe 2 with minimal amounts of structural disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Impact of Annealing on Superconducting Properties of Tantalum Thin Films

The pursuit for higher-coherence superconducting qubits has led to the adoption of new materials and innovative fabrication techniques. Among the commonly used superconducting materials, tantalum-based or tantalum-capped superconducting qubits have demonstrated the longest lifetimes, outperforming niobium devices even in the presence of their native oxides. Given the losses introduced by the surface oxide, one method to further improve performance is to reduce or eliminate the native oxide on tantalum through UHV annealing. In this work, we examine the effect of dissolved oxygen as a function of annealing temperature on the superconducting properties of tantalum thin films. Dissolved oxygen is quantified using atom probe tomography (APT) and secondary ion mass spectrometry (TOF-SIMS) and correlated with electromagnetic transport measurements performed using a Physical Property Measurement System (PPMS). This study observes that annealing decomposes the native oxide and drives oxygen diffusion into the film matrix. Increasing oxygen content decreases the superconducting transition temperature (Tc) and the residual resistivity ratio (RRR). The critical field decreases with the incorporation of oxygen, while the film’s coherence length decreases relatively by 5%. These results, as well as findings from ongoing studies linking fabrication processes to the structural and chemical properties of the superconducting film and Josephson junction, provide insight into effective strategies for improving the performance of superconducting devices.

Shinde, Maithilee [IIT, Chicago; Fermilab]↗
DOE OSTI2025

Superconducting properties of commercially available solders for low-field applications

Solders with superconducting transitions around 4K are useful in low magnetic field environments for AC current leads or in electrical and mechanical bonds. Accurate knowledge of these solders’ superconducting properties is essential for improving high precision experiments. We have measured the electrical resistance of five commercially-available eutectic or near-eutectic solders: 50%Sn-50%Pb, 60%Sn-40%Pb, 60%Sn-40%Pb-0.3%Sb, 52%In-48%Sn, and 96.5%Sn-3.5%Ag, down to 2.3K and in applied magnetic fields from 0 to 0.1 T . We report critical temperatures T c (B), 90%–10% transition widths ΔT c , and zero-temperature critical fields B c,0 . Our best candidate for low-loss AC current wiring in low fields is 50%Sn-50%Pb, which has a zero-field T c,0 = 7.1K (with ΔT c = 0.6 K), and remained high at T c (0.1 T) = 6.9K (ΔT c = 0.6K ). We also report, for the first time, T c and B c of 60%Sn-40%Pb-0.3%Sb and B c,0 of 96.5%Sn-3.5%Ag. Our T c,0 - 3.31K (ΔT c = 0.08K) for 96.5%Sn-3.5%Ag disagrees with a widely adopted value.

Hickman, C. [North Carolina State University, Rale↗
DOE OSTI2026

Effect of metal encapsulation on bulk superconducting properties of niobium thin films used in qubits

Niobium metal occupies nearly 100% of the volume of a typical 2D transmon device. While the aluminum Josephson junction is of utmost importance, maintaining quantum coherence across the entire device means that pair-breaking in Nb leads, capacitive pads, and readout resonators can be a major source of decoherence. The established contributors are surface oxides and hydroxides, as well as absorbed hydrogen and oxygen. Metal encapsulation of freshly grown surfaces with non-oxidizing metals, preferably without breaking the vacuum, is a successful strategy to mitigate these issues. While the positive effects of encapsulation are undeniable, it is important to understand its impact on the macroscopic behavior of niobium films. We present a comprehensive study of the bulk superconducting properties of Nb thin films encapsulated with gold and palladium/gold, and compare them to those of bare Nb films. Magneto-optical imaging, magnetization, resistivity, and London and Campbell penetration depth measurements reveal significant differences in encapsulated samples. Both sputtered, and epitaxial Au-capped films exhibit the highest residual resistivity ratio and superconducting transition temperature, as well as the lowest upper critical field, London penetration depth, and critical current. These results are in good agreement with the microscopic theory of anisotropic normal and superconducting states of Nb. We conclude that pair-breaking in the bulk of niobium films, driven by disorder throughout the film rather than just at the surface, is a significant source of quantum decoherence in transmons. We also conclude that gold capping not only passivates the surface but also affects the properties of the entire film, significantly reducing the scattering rate due to defects likely induced by surface diffusion if the film is not protected immediately after fabrication.

Datta, Amlan [Ames Lab; Iowa State U.]↗
DOE OSTI2025

Effects of Pressure on Superconducting Properties and Vortex Pinning of CaKFe 4 As 4 Single Crystals

Measurements of low field magnetization, trapped flux magnetization and 5 K flux creep in single crystal of CaKFe 4 As 4 under pressure up to 7.5 GPa in a diamond pressure cell are presented. Further, the observed evolution of the temperature dependence of the self-field critical current and slowing down of the base temperature flux creep rate are explained within the two sources of pinning hypothesis involving presence of CaFe 2 As 2 intergrowths suggested in the literature. Above the half collapsed tetragonal structural transition under pressure, where superconductivity is non-bulk or absent, critically diminished or no diamagnetism and flux trapped magnetization were observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Impact of Annealing on the Chemical and Superconducting Properties of Ta Thin Films

Tantalum thin films are annealed to dissolve the surface oxide. The effect of annealing is studied using material characterization tools, XPS and TOF-SIMS, and electrical transport measurements of the annealed films are taken using standard PPMS methods to correlate with the surface chemistry. Annealing dissociates the surface oxide, and the oxygen produced diffuses into the thin film. The introduction of oxygen reduces the quality of the thin film, as shown by the suppression of Tc and a reduction in RRR.

Shinde, Maithilee [IIT, Chicago]↗
DOE OSTI2024

Healing Gradient Degradation in Nb3Sn SRF Cavities Using a Recoating Method

Despite having advantageous superconducting properties, Nb3Sn superconducting radiofrequency (SRF) cavities still have practical challenges compared to Nb SRF cavities due to the brittle nature of Nb3Sn. Performance degradation can occur when a Nb3Sn SRF cavity experiences mechanical stresses such as during handling and tuning of the cavity. In this study, we present a potential treatment for SRF cavities that have experienced stress induced performance degradation that involves a recoating procedure. The degraded cavity is coated with a small amount of Sn using a single step vapor-diffusion methodology. Using this approach we can recover a significant portion of the lost performance of a Nb3Sn SRF cavity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Preventing native oxide formation in niobium thin films through platinum encapsulation

Superconducting transmon qubits are a key technology in quantum computing, with niobium (Nb) widely used due to its favorable superconducting properties and compatibility with scalable fabrication. However, the performance of Nb-based qubits is hindered by two-level systems (TLS), which arise predominantly from native oxide layers at surfaces and interfaces. These oxides and suboxides form rapidly in air and contribute significantly to decoherence by introducing dielectric losses. While various mitigation strategies, including thermal-annealing, chemical-etching, and nitrogen plasma treatment, have been explored, many are challenging to integrate into large-scale manufacturing due to complexity and instability in ambient conditions. In this study, we investigate the structural, chemical, and superconducting properties of room-temperature sputtered Nb thin films grown on sapphire substrates. We focus on a surface protection strategy using noble metal encapsulation with platinum (Pt) to suppress oxides and reduce TLS-related losses. Structural and chemical characterization were performed using X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. Superconducting properties were measured using a physical property measurement system. Results demonstrate that Pt encapsulation effectively suppresses surface oxidation and mitigates its detrimental impact on superconducting performance. In conclusion, this approach offers a promising path toward enhancing the coherence of Nb-based qubits while remaining compatible with scalable-fabrication processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and electrical transport properties of superconducting platinum silicide thin films and devices

Here, we evaluate the material characteristics of superconducting platinum silicide (PtSi) thin films as candidate materials for superconducting quantum information devices compatible with silicon technology. These films were synthesized using magnetron sputtering under ultrahigh vacuum conditions, followed by rapid thermal annealing. Polycrystalline PtSi films synthesized by this method have the favorable properties of superconducting critical temperature of 0.95 K and relatively long zero-temperature Ginzburg-Landau coherence length of 76 nm. We further studied coplanar microbridge devices fabricated by electron beam lithography and chlorine-free reactive ion etching, finding that the temperature-dependent critical current density follows the Ginzburg Landau depairing mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A chemical bonding based descriptor for predicting the role of anharmonicity induced by quantum nuclear effects in hydride superconductors

Quantum nuclear effects (QNEs) can significantly alter a material’s crystal structure and phonon spectra, impacting properties such as thermal conductivity and superconductivity. However, predicting a priori whether these effects will enhance or suppress superconductivity, or destabilize a structure, remains a grand challenge. Herein, we address this unresolved problem by introducing two possible descriptors, based upon the integrated crystal orbital bonding index (iCOBI) or the bond valence function, to predict the influence of QNEs on a crystal lattice’s dynamic stability, phonon spectra and superconducting properties. We find that structures with atoms in symmetric chemical bonding environments exhibit greater resilience to structural perturbations induced by QNEs, while those with atoms in asymmetric bonding environments are more susceptible to structural alterations, resulting in enhanced superconducting critical temperatures.

Physical chemistry↗
DOE OSTI2024

Fermi surface topology and magnetotransport properties of superconducting Pd 3 Bi 2 Se 2

Pd 3 Bi 2 Se 2 is a rare realization of a superconducting metal with a non-zero topological invariant. Here, in this study, we report the growth of high-quality single crystals of layered Pd 3 Bi 2 Se 2 with a superconducting transition at T c ≈ 0.80 K and upper critical fields of ~10 mT and ~5 mT for the in plane and out-of-plane directions, respectively. Our density functional theory (DFT) calculations reveal three pairs of doubly degenerate bands crossing the Fermi level all displaying clear three dimensional dispersion consistent with the overall low electronic anisotropy (<2). The multiband electronic nature of Pd 3 Bi 2 Se 2 is evident in magneto-transport measurements, yielding a sign changing Hall resistivity at low temperatures. The magnetoresistance is non-saturating and follows Kohler’s scaling rule. We interpret the magneto-transport data in terms of open orbits that are revealed in the DFT calculated Fermi surface. de Haas-van Alphen (dHvA) oscillation measurements using torque magnetometry on single crystals yield four frequencies for out-of-plane fields: F α = (150 ± 26) T, F β = (293 ± 10) T, F γ = (375 ± 20) T and F η = (1017 ± 12) T, with the low frequency dominating the spectrum. Through the measurement of angular dependent dHvA oscillations and DFT calculations we identify the F α frequency with an approximately ellipsoidal electron pocket centered on the L 2 point of the Brillouin zone. Lifshitz-Kosevich analysis of the dHvA oscillations reveals a small cyclotron effective mass m* = (0.11 ± 0.02)m 0 and a nontrivial Berry phase for the dominant orbit. The presence of nontrivial topology in a bulk superconductor positions Pd 3 Bi 2 Se 2 as a potential candidate for exploring topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unveiling the nucleation and growth of Zr oxide precipitates in internally oxidized Nb3Sn superconductors

We report on atomic-scale analyses of nucleation and growth of Zr oxide precipitates and the microstructural evolution of internally oxidized Nb3Sn wires for high-field superconducting magnet applications, utilizing atom probe tomography (APT), transmission electron microscopy (TEM), and first-principles calculations. APT analyses reveal that oxygen and zirconium are already segregated at grain boundaries (GBs) in the unreacted Nb-1Zr-4Ta (at%) alloy prior to forming Nb3Sn through reacting the Nb alloy with Sn and SnO2. After forming Nb3Sn, Zr oxide precipitates nucleate both at the Nb3Sn/Nb heterophase interfaces and in the Nb3Sn grains, driven by the small solubilities of Zr and O in Nb3Sn compared to their value in Nb. A high number density (Nv) of Zr oxide nanoprecipitates is observed in the Nb3Sn layers, ∼10 23 m −3 , with a mean diameter <10 nm for a heat treatment at 625 °C. Quantitative APT and TEM analyses of the Zr oxide precipitates in the reacted Nb3Sn layers elucidate details of the nucleation, growth, and coarsening processes of the Zr oxide precipitates in Nb3Sn. First-principles calculations and classical nucleation theory are employed to study the nucleation of Zr oxide precipitates in Nb3Sn and to estimate the maximum energy barrier and critical radius for nucleation. Our research unveils the kinetic pathways for nucleation and growth of Zr oxide precipitates and the microstructural evolution of Nb3Sn layers, which helps to understand and improve the superconducting properties of internally oxidized Nb3Sn wires for use in high-field superconducting magnets. •We investigated the nucleation and growth of Zr oxide nanoprecipitates in Nb3Sn superconductors for magnet applications.•APT and TEM analyses reveals the nucleation and growth process of Zr oxide precipitates in Nb3Sn layers.•Classical nucleation theory with DFT is employed to describe the nucleation process of Zr oxide precipitates in Nb3Sn.•We find that the interfacial reactions at Nb/Nb3Sn interface play a critical role in the nucleation of Zr oxide precipitates.•Current study provides a pathway to improve the properties of internally oxidized Nb3Sn superconducting wires.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Exploring the relationship between deposition method, microstructure, and performance of Nb/Si-based superconducting coplanar waveguide resonators

Superconducting quantum circuits (SQC) are one of the most promising hardware platforms for quantum computing, yet their performance is currently limited by the presence of various structural defects inside the circuit's structure. Despite impressive progress in the past decade, a precise understanding of the origin of these defects from various fabrication processes and their impact on coherence is still lacking. Here, in this study, we performed a comprehensive investigation on the microstructure, superconductivity, and resonator quality factor of Nb films deposited by high-power impulse magnetron sputtering (HiPIMS) and direct current (DC) magnetron sputtering. A suite of characterization techniques, including electron microscopy with spectroscopy, secondary ion mass spectrometry, magneto-optical microscopy, and pump-probe reflectivity spectroscopy is used. We reveal that niobium (Nb) resonators fabricated using HiPIMS exhibit a smaller average grain size, thicker surface oxide with larger thickness variations (rougher surface), and a thicker amorphous Nb/Si interface layer compared to samples deposited by DC sputtering. We identified that the amorphous Nb oxides (mainly located at the Nb surface and along the grain boundaries) and Nb-Si amorphous layers (at the Nb/Si interface) are major and potential sources of two-level system (TLS), while off-stochiometric oxides and suboxides of Nb close to the surface, crystalline defects (i.e., dislocations at grain boundary, point defects introduced during deposition) are main contributors of non-TLS sources. Our findings clarify the relationship between different defects and coherence loss mechanisms, highlighting the importance of material microstructure control on performance optimization in SQC.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Microscopic Scattering Approach to In-Gap States

We develop a microscopic scattering formalism to describe Yu-Shiba-Rusinov (YSR) states due to a single Cr adatom on the Bi-terminated surface of beta Bi2Pd, by combining ab initio Wannier functions with a real-space Green's function approach in the Bogoliubov-de Gennes formalism[1]. Our framework reproduces key scanning tunneling spectroscopy features, including a single particle-hole asymmetric YSR peak and isotropic dIdV maps around the impurity. Decomposing the YSR states reveals contributions from four nearly degenerate C4v representations, with energy broadening masking their individual signatures. Spin-orbit coupling induces partial spin polarization, while the spatial asymmetry between particle and hole components arises from Cr d-Bi p hybridization. These results highlight the importance of realistic band structures and microscopic modeling for interpreting STM data for magnetic in-gap states on superconductors. Further advances examining layered 2D material surfaces, such as NbSe2, will be described[2]. For this system the superconducting properties are obtained from a full anisotropic Eliashberg calculation of the superconducting order parameter along with the charge density wave gap. Additional features associated with proposals to measure the dynamics of these individual YSR states will be presented. [1] arXiv:2507.08740 [2] arXiv:2507.11856

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Effects of residual oxygen on superconducting niobium films

The integration of niobium (Nb) into emerging superconducting circuits can enhance their performance and function. However, growth of high purity Nb can be challenging due to its high reactivity with oxygen. Here, in this study, we examine the role of residual oxygen inside the growth chamber in transforming the structural, chemical, and superconducting properties of Nb films. We demonstrate that an increase in unintentional oxygen impurities lowers the superconducting critical temperature of Nb. This evolution coincides with the reduction of Nb crystal domains, which are separated by highly disordered oxygen-rich regions. Moreover, chemical analysis reveals the formation of niobium monoxide within the film during growth. These findings provide a comprehensive picture of how residual oxygen in the growth chamber can affect the properties of the Nb films. This study contributes to the materials science and engineering knowledge of superconducting Nb growth.

36 MATERIALS SCIENCE↗