Search NASA⌕ Search

SEARCH · Search NASA

Results for “Superconducting transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Studies of the Superconducting Transition in the Mo/Au-Bilayer Thin Films

At NASA Goddard, microcalorimeter arrays using superconducting transition edge sensor thermometers (TESs) are under development for high energy resolution X-ray astrophysics applications. We report on our studies of the superconducting transition in our Mo/Au-bilayer TES films including: low current measurements of the superconducting bilayer's resistance transition versus temperature on pixels with different normal metal absorber attachment designs and measured temperature scaling of the critical current and critical magnetic field.

Sadleir, John↗
DOE OSTI2022

Observation of three superconducting transitions in the pressurized CDW-bearing compound TaTe 2

Transition metal dichalcogenides host a wide variety of lattice and electronic structures, as well as corresponding exotic physical properties, especially under certain tuning conditions. Here, we report the observation of pressure-induced three superconducting transitions in TaTe 2 , a charge density wave (CDW)–bearing layered transition-metal dichalcogenide that is metallic but not superconducting at ambient pressure. We find that its CDW state can be easily suppressed upon increasing pressure up to ~1 GPa. A superconducting state then emerges from the suppressed CDW state and persists to the pressure about 7 GPa. Unexpectedly, another superconducting state appears at ~11 GPa within the same monoclinic (M) structure of its ambient-pressure one. Upon further compression to 21 GPa, a third superconducting state with higher T c appears from a high-pressure (HP) phase. Our experimental results suggest that the pressure-induced three superconducting transitions in TaTe 2 are, respectively, driven by the suppression of the CDW state, the change of the β angle in the M phase and the transition of M-to-HP phase. Finally, these results demonstrate not only the versatile nature of this correlated electron system, but also the first experimental example that shows the pressure-induced evolution from a CDW state to three superconducting states driven by different mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multimodal synchrotron x-ray diffraction across the superconducting transition of Sr 0.1 Bi 2 Se 3

Here, in the doped topological insulator Sr x Bi 2 ⁢Se 3 , a pronounced in-plane twofold symmetry is observed in electronic properties below the superconducting transition temperature T c ~ 3 K, despite the threefold symmetry of the observed $R\overline{3}m$ space group. The axis of twofold symmetry is nominally pinned to one of three rotationally equivalent crystallographic directions and crystallographic strain has been proposed to be the origin of this pinning. We carried out multimodal synchrotron diffraction and resistivity measurements down to and in magnetic fields up to 45 kG on a single crystal of to probe the effect of superconductivity on the crystallographic distortion. Our results indicate that there is no in-plane crystallographic distortion at the level of 1 x 10 -5 associated with the superconducting transition. These results further support the model that the large twofold in-plane anisotropy of superconducting properties of Sr x Bi 2 ⁢Se 3 is not structural in origin, but electronic, namely, it is caused by a nematic superconducting order parameter of E u symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2012

Can the Lateral Proximity Effect Be Used to Create the Superconducting Transition of a Micron-Sized TES?

Recent measurements of micron-sized Mo/Au bilayer Transition Edge Sensors (TESs) have demonstrated that the TES can behave like an S-S'-S weak link due to the lateral proximity effect from superconducting leads. In this regime the Tc is a function of bias current, and the effective Tc shifts from the bilayer Tc towards the lead Tc. We explore the idea that a micron-sized S-N-S weak link could provide a new method to engineer the TES Tc. This method would be particularly useful when small size requirements for a bilayer TES (such as for a hot-electron microbolometer) lead to undesirable shifts in the bilayer Te. We present measurements of a variety of micron-sized normal Au 'TES' devices with Nb leads. We find no evidence of a superconducting transition in the Au film of these devices, in dramatic contrast to the strong lateral proximity effect seen in micron-sized Mo/Au bilayer devices. The absence of a transition in these devices is also in disagreement with theoretical predictions for S-N-S weak links. We hypothesize that a finite contact resistance between the Nb and Au may be weakening the effect. We conclude that the use of the lateral proximity effect to create a superconducting transition will be difficult given current fabrication procedures.

Barrentine, E. M.↗
NASA NTRS1997

On-Orbit Measurement of the Superconductive Transition Temperatures of YBa2Cu3O(7-x) Thick Films

Thick film superconductors were integrated into hybrid circuits and tested in the Materials In Devices As Superconductors (MIDAS) spaceflight experiment which operated autonomously aboard the MIR space station for 90 days. MIDAS was designed to cool the circuits from 300 to 75K, maintain the temperature at 75K for 28 days, and warm the circuits back to 300K. This cycle was performed a total of three times, during which the superconductive transition temperature was measured during each cool-down and warm-up portion of the experiment. All of the thick films used in this experiment exhibited superconductive transition temperatures of approximately 87K, and no significant differences in the resistance versus temperature properties of the materials were observed among the data collected during pre-flight, flight, and post-flight operations.

Hooker, Matthew W.↗
NASA NTRS2012

Phonon Mechanisms for Excess Heat Capacity in Membrane Isolated Superconducting Transition Edge Sensors

The mechanics of phonon transport in membrane-isolated superconducting transition edge sensors is discussed. Surveys of the literature on this type of sensor reveal a number of designs with excess heat capacity and a smaller subset that exhibit decoupling of the superconducting film from the underlying dielectric. A simple model is addressed in which the membrane, despite its thermal isolation, fails to fully thermalize to the temperature of the metal film heating it. A population of phonons exists which is emitted by the metal film, partially thermalizes the dielectric and is then reabsorbed in the metal film without escaping from the device structure to the thermal bath. The size of this population and its contribution to the heat capacity are estimated for several device scenarios.

Chervenak, James A.↗
NASA NTRS2012

Phonon Mechanisms for Excess Heat Capacity in Membrane Isolated Superconducting Transition Edge Sensors

The mechanics of phonon transport in membrane-isolated superconducting transition edge sensors is discussed. Surveys of the literature on this type of sensor reveal a number of designs with excess heat capacity and a smaller subset that exhibit decoupling of the superconducting film from the underlying dielectric. A simple model is addressed in which the membrane, despite its thermal isolation, fails to fully thermalize to the temperature of the metal film heating it. A population of phonons exists which is emitted by the metal film, partially thermalizes the dielectric and is then reabsorbed in the metal film without escaping from the device structure to the thermal bath. The size of this population and its contribution to the heat capacity are estimated for several device scenarios.

Chervenak, James A.↗
DOE OSTI2023

Machine learning the relationship between Debye temperature and superconducting transition temperature

Recently a relationship between the Debye temperature $Θ_D$ and the superconducting transition temperature $T_c$ of conventional superconductors has been proposed [Esterlis et al., npj Quantum Mater. 3, 59 (2018)]. The relationship indicates that $T_c$ ≤ $AΘ_D$ for phonon-mediated BCS superconductors, with $A$ being a prefactor of order ~ $0.1$. In order to verify this bound, we train machine learning (ML) models with 10 330 samples in the Materials Project database to predict $Θ_D$. Here, by applying our ML models to 9860 known superconductors in the NIMS SuperCon database, we find that the conventional superconductors in the database indeed follow the proposed bound. We also perform first-principles phonon calculations for $\mathrm{H_3S}$ and $\mathrm{LaH_{10}}$ at 200 GPa. The calculation results indicate that these high-pressure hydrides essentially saturate the bound of $T_c$ versus $Θ_D$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2010

l/f Noise in the Superconducting Transition of a MgB2 Thin Film

The noise voltage spectral density in the superconducting transition of a MgB2 thin film on a SiN-coated Si thick substrate was measured over the frequency range 1 Hz-to-1 KHz. Using established bolometer noise theory the theoretical noise components due to Johnson, 1/f(excess) and phonon noise are modeled to the measured data. It is shown that for the case of a MgB2 thin film in the vicinity of the mid-point of transition, coupled to a heat sink via a fairly high thermal conductance (approximately equal to 10(sup -1) W/K)) that the measured noise voltage spectrum is 1/f limited and exhibits lit dependence with a varying between 0.3 and 0.5 in the measured frequency range. At a video frame rate frequency of 30 Hz the measured noise voltage density in the film is approximately equal to 61 nV /the square root of HZ, using this value an upper limit of electrical NEP approximately equal to 0.67pW / the square root of Hz is implied for a practical MgB2 bolometer operating at 36.1 K.

Lakew, B.↗
NASA NTRS2011

Ultrasensitive Superconducting Transition Edge Sensors Based On Electron-Phonon Decoupling

We have successfully fabricated the superconducting transition edge sensor (TES), bolometer technology that centers on the use of electron-phonon decoupling (EPD) to thermally isolate the bolometer. Along with material characterization for large format antenna coupled bolometer arrays, we present the initial test results of bolometer based on EPD designed for THz detection. We have selected a design approach that separates the two functions of photon absorption and temperature measurement, allowing separate optimization of the performance of each element. We have integrated Molybdenum/Gold (Mo/Au) bilayer TES and ion assisted thermally evaporated (IAE) Bismuth (Bi) films as radiation absorber coupled to a low-loss microstripline from Niobium (Nb) ground plane to a twin-slot antenna structure. The thermal conductance and the time constant of these devices have been measured, and are consistent with our calculations. The device exhibits a single time constant at 0.1 K of approx.160 IlS, which is compatible with readout by a high-bandwidth single SQUID or a time domain SQUID multiplexer. The effects of thermal conductance and electrothermal feedback are major determinants of the time constant, but the electronic heat capacity also plays a major role. The NEP achieved in the device described above is 2.5x10(exp -17)W(gamma)Hz. Our plan is to demonstrate a reduction of the volume in the superconducting element to 5 microns x 5 microns in films of half the thickness at Tc = 60mK. By calculation, this new geometry corresponds to an NEP reduction of two orders of magnitude to 2.5x10(exp -19)W/(gamma)Hz, with a time constant of ~130/ls.

Jethava, Nikhil↗
DOE OSTI2023

Doubling the superconducting transition temperature of ultraclean wafer-scale aluminum nanofilms

Here, we studied the role of reduced dimensionality and disorder in the superconducting properties of wafer-scale aluminum (Al) nanofilms. This new generation of ultrathin films were grown using molecular beam epitaxy and depict normal-state sheet resistance at least 20 times lower than the quantum resistance ℎ⁡/(4⁢𝑒 2 ). Defying general expectations, the superconducting transition temperature of our films increases with decreasing Al film thickness, reaching 2.4 K for a 3.5-nm-thick Al film grown on GaAs: twice that of bulk Al (1.2 K). Surface phonon softening is shown to impact superconductivity in pure ultrathin films, offering a route for materials engineering in two dimensions.

2-dimensional systems↗
NASA NTRS2010

Development of Superconducting Transition Edge Sensors Based on Electron-Phonon Decoupling

We have successfully fabricated a superconducting transition edge sensor (TES), bolometer that centers on the use of electron-phonon decoupling (EPD) for thermal isolation. We have selected a design approach that separates the two functions of far-infrared and THz radiative power absorption and temperature measurement, allowing separate optimization of the performance of each element. We have integrated molybdenum/gold (Mo/Au) bilayer TES and ion assisted thermally evaporated (IAE) bismuth (Bi) films as radiation absorber coupled to a low-loss microstripline from niobium (Nb) ground plane to a twin-slot antenna structure. The thermal conductance (G) and the time constant for the different geometry device have been measured. For one such device, the measured G is 1.16 x 10(exp -10) W/K (plus or minus 0.61 x 10(exp- 10) W/K) at 60 mK, which corresponds to noise equivalent power (NEP) = 1.65 X 10(exp -18)W/vHz and time constant of approximately 5 microseconds.

Jethava, Nikhil↗
NASA NTRS1971

Effect of uniaxial stress on the superconducting transition temperature of monocrystalline Nb3Sn.

Measurements have been made of the stress dependence of the superconducting transition temperature (T sub c) of single crystals of Nb3Sn oriented in the (001) direction. The magnitude of the stress dependence of T sub c is about 1000 times larger than that generally observed for elemental superconductors. The results further imply that below the tetragonal transformation temperature (T sub m), the crystal consists of tetragonal domains with variable orientation of the c axis and that the domain configuration and T sub c depend on the applied stress at T sub m.

Mcevoy, J. P.↗
NASA NTRS2002

Broadband Direct Detection Submillimeter Spectrometer with Multiplexed Superconducting Transition Edge Thermometer Bolometers

We present performance results based on the first astronomical use of multiplexed superconducting bolometers as direct detectors (i.e., with cold electrons) for spectroscopy. The Fabry-Perot Interferometer Bolometer Research Experiment (FIBRE) is a broadband submillimeter spectrometer for the Caltech Submillimeter Observatory (CSO). FIBRE's detectors are superconducting transition edge sensor (TES) bolometers read out by a SQUID multiplexer. The Fabry-Perot uses a low resolution grating to order sort the incoming light. A linear bolometer array consisting of 16 elements detects this dispersed light, capturing 5 orders simultaneously from one position on the sky. With tuning of the Fabry-Perot over one free spectral range, a spectrum covering Delta lambda/lambda = 1/7 at a resolution of delta lambda/lambda = 1/1200 can be acquired. This spectral resolution is sufficient to resolve Doppler-broadened line emission from external galaxies. FIBRE has been operated in the 350 Am (850 GHz) band. These bands cover line emission from the important star formation tracers neutral carbon [CI] and carbon monoxide (CO).

Benford, D. J.↗
DOE OSTI2024

Evolution of Superconducting-Transition Temperature with Superfluid Density and Conductivity in Pressurized Cuprate Superconductors

What factors fundamentally determine the value of superconducting transition temperature T c in high temperature superconductors has been the subject of intense debate. Following the establishment of an empirical law known as Homes' law, there is a growing consensus in the community that the T c value of the cuprate superconductors is closely linked to the superfluid density (ρ s ) of its ground state and the conductivity (σ) of its normal state. However, all the data supporting this empirical law (ρ s = AσT c ) have been obtained from the ambient-pressure superconductors. In this study, we present the first high-pressure results about the connection of the quantities of ρ s and σ with T c , through the studies on the Bi 1.74 Pb 0.38 Sr 1.88 CuO 6+δ and Bi 2 Sr 2 CaCu 2 O 8+δ , in which the value of their high-pressure resistivity (ρ = 1/σ) is achieved by adopting our newly established method, while the quantity of ρs is extracted using Homes' law. In conclusion, we highlight that the T c values are strongly linked to the joint response factors of magnetic field and electric field, i.e., ρ s and σ, respectively, implying that the physics determining T c is governed by the intrinsic electromagnetic fields of the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗