Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Surface Generation and Cartesian Mesh Support

This document serves as the final report for the grant titled Surface Generation and Cartesian Mesh Support . This completed work was in algorithmic research into automatically generating surface triangulations from CAD geometries. NASA's OVERFLOW and Cart3D simulation packages use surface triangulations as an underlying geometry description and the ability to automatically generate these from CAD files (without translation) substantially reduces both the wall-clock time and expertise required to get geometry out of CAD and into mesh generation. This surface meshing was exercised greatly during the Shuttle investigation during the last year with success. The secondary efforts performed in this grant involve work on a visualization system cut-cell handling for Cartesian Meshes with embedded boundaries.

Haimes, Robert↗
NASA NTRS1984

The role of surface generated radicals in catalytic combustion

The role of surface generated OH radicals in determining the catalytic ignition characteristics for propane oxidation on platinum were studied. The experiments were conducted in a stacked-plate, catalyst bed. Transient measurements, during catalytic ignition, of the catalyst's axial temperature profile were made and the effect of equivalence ratio, inlet temperature and inlet velocity was investigated. These measurements will provide insights which will be useful in planning and interpreting to OH measurements. Attempts to measure OH concentration in the catalyst bed using resonance absorption spectroscopy were unsuccessful, indicating that OH concentrations are below 10 to the 16th power/cc but still possibly above equilibrium values. Measurements are currently underway using forward scatter laser induced fluorescence which should extend the OH detection limits several orders of magnitude below the equilibrium concentrations.

Santavicca, D. A.↗
NASA NTRS1990

A three-dimensional application with the numerical grid generation code: EAGLE (utilizing an externally generated surface)

Program EAGLE (Eglin Arbitrary Geometry Implicit Euler) is a multiblock grid generation and steady-state flow solver system. This system combines a boundary conforming surface generation, a composite block structure grid generation scheme, and a multiblock implicit Euler flow solver algorithm. The three codes are intended to be used sequentially from the definition of the configuration under study to the flow solution about the configuration. EAGLE was specifically designed to aid in the analysis of both freestream and interference flow field configurations. These configurations can be comprised of single or multiple bodies ranging from simple axisymmetric airframes to complex aircraft shapes with external weapons. Each body can be arbitrarily shaped with or without multiple lifting surfaces. Program EAGLE is written to compile and execute efficiently on any CRAY machine with or without Solid State Disk (SSD) devices. Also, the code uses namelist inputs which are supported by all CRAY machines using the FORTRAN Compiler CF177. The use of namelist inputs makes it easier for the user to understand the inputs and to operate Program EAGLE. Recently, the Code was modified to operate on other computers, especially the Sun Spare4 Workstation. Several two-dimensional grid configurations were completely and successfully developed using EAGLE. Currently, EAGLE is being used for three-dimension grid applications.

Houston, Johnny L.↗
NASA NTRS1986

Carrier surface generation and recombination effects in photoconduction of HgI2 single crystals

Dc photoconductivity characteristics of HgI2 single crystals have been measured in the range of 1.75-2.75 eV, using CuI as a transparent electrical contact. Hole and electron photocurrents could be separately measured by applying different voltage polarities to the illuminated electrode. It is shown that charge carrier generation near the surface is highly extrinsic, as displayed by differences in the hole and electron photogeneration spectra. Analysis of the photoconductivity versus voltage characteristics indicates that the hole and electron bulk trapping times satisfy greater than 70 and 3 microsec, respectively. The hole and electron surface recombination velocities were 1.0 x 10 to the 4th cm/s and 8 x 10 to the 5th cm/s, respectively.

Burshtein, Z.↗
NASA NTRS1992

Multi-wave interaction theory for wind-generated surface gravity waves

Consistently employing the assumption of localness of wave-wave interactions in the wavenumber space, the Kolmogorov treatment of the energy cascade is applied to the case of wind-generated surface gravity waves. The effective number v of resonantly interacting wave harmonics is not limited to four but is found as a solution of a coupled system of equations expressing: (i) the dependence of the spectrum shape on the degree of the wave nonlinearity, and (ii) the continuity of the wave action flux through the spectrum given a continuous positive input from wind. The latter is specified in a Miles-type fashion, and a simple scaling relationship based on the concept of the turnover time is derived in place of the kinetic equation. The mathematical problem is reduced to an ordinary differential equation of first order. The exponent in the 'power law' for the spectral density of the wave potential energy and the effective number of resonantly interacting wave harmonics are found as functions of the wave frequency and of external factors of wind-wave interaction. The solution is close to the Zakharov-Filonenko spectrum at low frequencies and low wind input while approaching the Phillips spectrum at high frequencies and sufficiently high wind.

Glazman, Roman E.↗
NASA NTRS2002

Probabilistic #D data fusion for multiresolution surface generation

In this paper we present an algorithm for adaptive resolution integration of 3D data collected from multiple distributed sensors. The input to the algorithm is a set of 3D surface points and associated sensor models. Using a probabilistic rule, a surface probability function is generated that represents the probability that a particular volume of space contains the surface. The surface probability function is represented using an octree data structure; regions of space with samples of large conariance are stored at a coarser level than regions of space containing samples with smaller covariance. The algorithm outputs an adaptive resolution surface generated by connecting points that lie on the ridge of surface probability with triangles scaled to match the local discretization of space given by the algorithm, we present results from 3D data generated by scanning lidar and structure from motion.

3D data fusion multiresolution surface generation ↗
NASA NTRS1982

Standing waves along a microwave generated surface wave plasma

Two surface wave plasma columns, generated by microwave power in argon at gas pressures of 0.05 torr to 330 torr, interact in the same discharge tube to form standing surface waves. Radial electric field and azimuthal magnetic field outside the discharge tube are measured to be 90 deg out of phase with respect to axial position and to decay exponentially with radial distance from the tube axis. Maximum light emission occurs at the position of maximum azimuthal magnetic field and minimum radial electric field. Electron temperature and density are measured at low pressures with double probes inserted into the plasma at a null of radial electric field. Measured electron densities compare well with those predicted by Gould-Trivelpiece surface wave theory.

Rogers, J.↗
DOE OSTI2023

Site-Selective Atomic Layer Deposition at Thermally Generated Surface Oxygen Vacancies on Rutile TiO 2

Unique atomic arrangements (i.e., defects) on material surfaces may exhibit distinctive reactivity that affords opportunities for selective surface chemistry exclusively at those sites. While theoretically appealing, site-selective atomic layer deposition (ALD) processes remain largely unrealized experimentally. Here we provide evidence for site-selective ALD that exclusively targets oxygen vacancies thermally generated at the surface of TiO 2 single crystals. High-resolution in situ ellipsometry reveals the nucleation behavior of dimethylaluminum isopropoxide (DMAI) and water at process conditions precisely tuned for selective hydroxylation of surface defects. An island growth model for nucleation and atomic force microscopy (AFM) imaging are consistent with a site-selective growth mechanism that depends on the surface oxygen vacancy density. This approach to direct ALD reactions at defective surface sites may provide future opportunities for targeted remediation of electronically imperfect interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

The role of surface generated radicals in catalytic combustion

Experiments were conducted to better understand the role of catalytic surface reactions in determining the ignition characteristics of practical catalytic combustors. Hydrocarbon concentrations, carbon monoxide and carbon dioxide concentrations, hydroxyl radical concentrations, and gas temperature were measured at the exit of a platinum coated, stacked plate, catalytic combustor during the ignition of lean propane-air mixtures. The substrate temperature profile was also measured during the ignition transient. Ignition was initiated by suddenly turning on the fuel and the time to reach steady state was of the order of 10 minutes. The gas phase reaction, showed no pronounced effect due to the catalytic surface reactions, except the absence of a hydroxyl radical overshoot. It is found that the transient ignition measurements are valuable in understanding the steady state performance characteristics.

Santavicca, D. A.↗
NASA NTRS1986

Surface generation and detection of coupled fiber-matrix mode acoustic wave propagation in fiber-reinforced composites

A technique is described that makes it possible to transmit and receive bulk ultrasonic waves launched from the same surface of a composite sheet by means of transducers mounted on variable angle blocks. A straightforward approach to measure the velocity and attenuation of this wave is presented. A bulk compressional wave of 930,000 cm/sec velocity was launched and received in this manner in an 8-ply unidirectional T-300-5208 epoxy composite. Preliminary results indicate that parameters associated with this wave might be sensitive to accumulated damage in a composite; thus, the technique has a potential for NDE in structures made from composite materials.

Yost, W. T.↗
NASA NTRS1993

Wear reduction in ceramic bearings by surface generated pyrolytic carbon continuously replenished by ethylene gas

Sliding tests with a pin-on-disc tribometer and both sliding and rolling tests with a modified four-ball tester at bulk temperatures of about 500 C and contact pressures of about 2.2 GPa have demonstrated up to 80% reductions of friction and wear with silicon nitride surfaces when a stream of ethylene is directed into the conjunction region. The effects are even more pronounced when the ethylene is prenucleated by a flow over a coil of nichrome wire electrically heated to about 800 C and located about 30 cm upstream of the exit nozzle. Steel and Ni-plated steel are lubricated by this method even more efficiently at lower temperatures.

Lauer, J. L.↗
NASA NTRS1981

Interpretation of phase velocity measurements of wind-generated surface waves

Differences in experimental results for surface gravity wave phase speeds obtained by cross spectra and slope-height spectra are compared. It is shown that, for a simple two-dimensional model containing both dispersive and non-dispersive waves, the observed differences can be explained readily. The slope-height technique measures a weighted average of the wavenumber squared; for frequencies sufficiently large compared with the dominant frequency, the computed phase-speed variation with frequency is representative of the wave having the larger wavenumber - the dispersive wave. For the cross-spectral method, it is shown that the small-probe-separation assumption usually employed is not valid for frequencies much larger than the dominant frequency, except at the singular point where both waves have exactly equal spectral densities and the phase function represents an average of the two modes. For all other cases, the phase function approaches that of the wave having the larger spectral density, and essentially ignores the presence of the other wave, even if both modes are relatively close in their contributions to the total spectral density.

Dudis, J. J.↗
NASA NTRS1992

Surface generation and editing operations applied to structural support of aerospace vehicle fuselages

The Solid Modeling Aerospace Research Tool (SMART) is a computer aided design tool used in aerospace vehicle design. Modeling of structural components using SMART includes the representation of the transverse or cross-wise elements of a vehicle's fuselage, ringframes, and bulkheads. Ringframes are placed along a vehicle's fuselage to provide structural support and maintain the shape of the fuselage. Bulkheads are also used to maintain shape, but are placed at locations where substantial structural support is required. Given a Bezier curve representation of a cross sectional cut through a vehicle's fuselage and/or an internal tank, this project produces a first-guess Bezier patch representation of a ringframe or bulkhead at the cross-sectional position. The grid produced is later used in the structural analysis of the vehicle. The graphical display of the generated patches allows the user to edit patch control points in real time. Constraints considered in the patch generation include maintaining 'square-like' patches and placement of longitudinal, or lengthwise along the fuselage, structural elements called longerons.

Schwartz, Susan K.↗
NASA NTRS2019

NASA’s Next Generation Surface Deformation and Change Observing System Architecture

The United States National Aeronautics and Space Administration (NASA) has initiated a five-year study of a Surface Deformation and Change Observing System Architecture. The goal of the study is to define an observing system that would meet the recommendations of the 2017 US National Academy of Sciences, Engineering, and Medicine Decadal Survey for developing an affordable synthetic aperture radar-based system or systems that can address fundamental scientific questions about the nature of hazards, disasters, landscape change, and serve applications communities as well. The study is to consider the existing international constellation of SAR systems, both civil and commercial, as well as new technologies that could be employed to address scientific and applications objectives and to improve affordability. The study will be conducted in four phases: 1) expanding the architectural trade space; 2) assessing the science and applications value of each identified architecture; 3) down selecting to three final candidates and performing detailed assessments; 4) final reporting and preparation for mission formulation. The first phase is approximately 2 years in duration, and will concentrate on the scope of research and application areas to be addressed, defining the possible architectures to consider, and beginning the assessment of their performance. The study team comprises five NASA centers. Broad participation from the research, applications, technology, and commercial sectors is planned.

Paul A Rosen↗
NASA NTRS1981

Implementation of nonreflective boundary condition at the outflow boundary

Numerical techniques for the solution of free surface flows about a disturbance on or near a free surface were developed. Any disturbance moving on or near a liquid surface generates surface waves that propagate away from the disturbance. The potential flow problems in which the evolution of free surface waves is the principal phenomenon of interest are considered. The distinct feature of these problems is that the position of the surface is also unknown and is to be determined as part of the solution. Two boundary conditions are required at the free surface since there are two unknown functions there, the free surface height and the potential function. The required boundary conditions are satisfied by the kinematic condition which states that no flow can cross the surface and the dynamic condition which matches the fluid pressure to the pressure acting on the surface through Bernoulli's equation.

Hall, D. R.↗