Search NASA⌕ Search

SEARCH · Search NASA

Results for “TELLURIUM ADDITIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Cosmogenic-neutron activation of TeO 2 and implications for neutrinoless double- β decay experiments

Flux-averaged cross sections for cosmogenic-neutron activation of natural tellurium were measured using a neutron beam containing neutrons of kinetic energies up to ~800 MeV, and having an energy spectrum similar to that of cosmic-ray neutrons at sea-level. Analysis of the radioisotopes produced reveals that 110m Ag will be a dominant contributor to the cosmogenic-activation background in experiments searching for neutrinoless double-beta decay of 130 Te, such as CUORE and SNO+. Here, an estimate of the cosmogenic-activation background in the CUORE experiment has been obtained using the results of this measurement and cross-section measurements of proton activation of tellurium. Additionally, the measured cross sections in this work are also compared with results from semi-empirical cross-section calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase stability and lattice thermal conductivity reduction in CoSb{sub 3} skutterudites, doped with chalcogen atoms

We report a significant reduction in the lattice thermal conductivity of the CoSb{sub 3} skuttertudites, doped with chalcogen atoms. Te/Se chalcogen atoms doped CoSb{sub 3} skutterudite samples (Te{sub 0.1}Co{sub 4}Sb{sub 12}, Se{sub 0.1}Co{sub 4}Sb{sub 12}, Te{sub 0.05}Se{sub 0.05}Co{sub 4}Sb{sub 12}) are processed by ball milling and spark plasma sintering. X-ray diffraction data combined with energy dispersive X-ray spectra indicate the doping of Te/Se chalcogen atoms in the skutterudite. The temperature dependent X-ray diffraction confirms the stability of the Te/Se doped CoSb{sub 3} skutterudite phase and absence of any secondary phase in the temperature range starting from 300 K to 773 K. The Raman spectroscopy reveals that different chalcogen dopant atoms cause different resonant optical vibrational modes between the dopant atom and the host CoSb{sub 3} skutterudite lattice. These optical vibrational modes do scatter heat carrying acoustic phonons in a different spectral range. It was found that among the Te/Se chalcogen atoms, Te atoms alter the host CoSb{sub 3} skutterudite lattice vibrations to a larger extent than Se atoms, and can potentially scatter more Sb related acoustic phonons. The Debye model of lattice thermal conductivity confirms that the resonant phonon scattering has important contributions to the reduction of lattice thermal conductivity in CoSb{sub 3} skutterudites doped with Te/Se chalcogen atoms. Lattice thermal conductivity ∼ 0.9 W/mK at 773 K is achieved in Te{sub 0.1}Co{sub 4}Sb{sub 12} skutterudites, which is the lowest value reported so far in CoSb{sub 3} skutterudites, doped with single Te chalcogen atom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of Tellurium as a Fuel Additive in Neodymium-Containing U-Zr Metallic Fuel

Phase-stability in a U-Zr-Te-Nd multi-component metallic fuel for advanced nuclear reactors is systematically investigated by taking into account binary, ternary and quaternary interactions between elements involved. Historically, the onset of fuel-cladding chemical interactions (FCCI) greatly limits the burnup potential of U-Zr fuels primarily due to interactions between lanthanide fission products and cladding constituents. Tellurium (Te) is evaluated as a potential additive for U-Zr fuels to bind with lanthanide fission products, e.g. neodymium (Nd), negating or mitigating the FCCI effect. Potential fresh fuel alloy compositions with the Te additive, U-Zr-Te, are characterized. Te is found to completely bind with Zr within the U-Zr matrix. Alloys simulating the formation of the lanthanide element Nd within U-Zr-Te are also evaluated, where the Te-Nd binary interaction dominates and NdTe is found to form as a high temperature stable compound. The experimental observations agree well with the trends obtained from density functional theory calculations. According to the calculated enthalpy of mixing, Zr-Te compound formation is favored in the U-Zr-Te alloy whereas NdTe compound formation is favored in the U-Zr-Te-Nd alloy. Further, the calculated charge density distribution and density of states provide sound understanding of the mutual chemical interactions between elements and phase-stability within the multi-component fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of boron localized states on the conduction band transport in B{sub x}Ga{sub 1−x}P

We study the magnetotransport properties of an n-type (B,Ga)P:Te alloy and an n-type GaP:Te reference under hydrostatic pressure up to 17 kilobars in the temperature range from 1.5 to 300 K. The free carrier concentration and the mobility of the reference sample are almost independent of the applied hydrostatic pressure at room temperature. In contrast, the free carrier concentration as well as the mobility in the B{sub 0.012}Ga{sub 0.988}P:Te alloy increase by about 30% over the accessible pressure range. The observations are explained by assuming that a boron-related density of localized states exists in the vicinity of the conduction band edge of the alloy. These boron states act as electron traps as well as efficient scatter centers. Applying hydrostatic pressure shifts the energetic positions of conduction band edge at the X-point (where the electron transport takes place) and of the boron states apart reducing the impact of boron on the electronic transport properties of the alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sulfide Transformation with Tellurium Treatment for Y15 Free-Cutting Steel

To investigate the effect of tellurium on the morphology of sulfide, various amounts of tellurium powders were added to the Y15 free-cutting commercial steel melt and then the melt was cooled in different cooling modes. The composition and morphology of sulfide and telluride in steel were analyzed to investigate the mechanism of MnS transformation combined with in situ observation. The results showed that the precipitation of chain-like MnS inclusions was significantly inhibited due to the addition of tellurium, and these MnS inclusions were transformed into complex inclusions with lower aspect ratios, which were composed of MnS and MnTe. In air-cooling mode, the MnS inclusions were effectively spheroidized when the w([Te])/w([S]) in steel was 0.2, whereas tellurium had almost no effect on the morphology of sulfide in furnace-cooling mode. The mechanism of sulfide spheroidization is discussed. The mechanism was verified by in situ observation experiment through high-temperature laser confocal microscopy.

36 MATERIALS SCIENCE↗

Thermally Stable Ruthenium Contact for Robust p‑Type Tellurium Transistors

Tellurium (Te) is attractive for p-channel transistors due to its high hole mobility. Despite having a low thermal budget suitable for back-end-of-line (BEOL) monolithic integration, the practical realization of Te transistors is hindered by its thermal stability. In this work, we investigate thermal stability for Te thin films grown via scalable thermal evaporation. Our findings identify ruthenium as a more thermally stable contact for p-type Te transistors, capable of withstanding temperatures up to 250 °C. Ruthenium exhibits significantly lower diffusivity in Te compared to other contact metals commonly used such as nickel and palladium. Using the transfer-length method, we measured a contact resistance of 1.25 kΩ·μm at the ruthenium-tellurium interface. Additionally, the incorporation of high-κ ZrO2 encapsulation not only suppresses the sublimation of the Te channel at elevated temperatures but also serves as the gate dielectric in top-gate devices operating at 1 V, achieving an on/off current ratio of 105.

Rahman, I K M Reaz↗

Surface passivation of tellurium-doped GaAs nanowires by GaP: Effect on electrical conduction

We report on the surface passivation of Au-assisted Te-doped GaAs nanowires (NWs) grown by metalorganic vapor phase epitaxy. The electrical properties of individual free standing NWs were assessed using a tungsten nano-probe inside a scanning electron microscope. The diameter independent apparent resistivity of both strained and relaxed passivated NWs suggests the unpinning of the Fermi level and reduction of sidewalls surface states density. Similar current-voltage properties were observed for partially axially relaxed GaAs/GaP NWs. This indicates a negligible contribution of misfit dislocations in the charge transport properties of the NWs. Low temperature micro-photoluminescence (μ-PL) measurements were also carried out for both uncapped and passivated GaAs NWs. The improvement of the integrated (μ-PL) intensity for GaAs/GaP NWs further confirms the effect of passivation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Native point defects in GaSb

We have applied positron annihilation spectroscopy to study native point defects in Te-doped n-type and nominally undoped p-type GaSb single crystals. The results show that the dominant vacancy defect trapping positrons in bulk GaSb is the gallium monovacancy. The temperature dependence of the average positron lifetime in both p- and n-type GaSb indicates that negative ion type defects with no associated open volume compete with the Ga vacancies. Based on comparison with theoretical predictions, these negative ions are identified as Ga antisites. The concentrations of these negatively charged defects exceed the Ga vacancy concentrations nearly by an order of magnitude. We conclude that the Ga antisite is the native defect responsible for p-type conductivity in GaSb single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties change in Te diffused As{sub 50}Se{sub 50} chalcogenide thin film

In the present report, we present the effect of Te diffusion into As{sub 50}Se{sub 50} thin film which changes the optical properties. The Te/As{sub 50}Se{sub 50} film was irradiated by a laser beam of 532 nm to study the diffusion mechanism due to photo induced effect. The As{sub 50}Se{sub 50}, Te/As{sub 50}Se{sub 50} films show a completely amorphous nature from X-ray diffraction study. A non direct transition was found for these films on the basis of optical transmission data carried out by Fourier Transform infrared Spectroscopy. The optical bandgap is found to be decreased with Te deposition and photo darkening phenomena is observed for the diffused film. The change in the optical constants are well supported by the corresponding change in different types of bonds which are being studied by X-ray photoelectron spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

IR luminescence of tellurium-doped silica-based optical fibre

Tellurium-doped germanosilicate fibre has been fabricated by the MCVD process. In contrast to Te-containing glasses studied earlier, it has a broad luminescence band (full width at half maximum of {approx}350 nm) centred at 1500 nm, with a lifetime of {approx}2 {mu}s. The luminescence of the fibre has been studied before and after gamma irradiation in a {sup 60}Co source to 309 and 992 kGy. The irradiation produced a luminescence band around 1100 nm, with a full width at half maximum of {approx}400 nm and lifetime of {approx}5 {mu}s. (letters)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of irradiation with gamma-ray photons on the charge-transport mechanism in n-CdS/p-CdTe heterostructures

Effect of irradiation with {gamma}-ray photons on the mechanism of charge transport in an n-CdS/p-CdTe heterostructure is considered. It is shown that the forward current-voltage characteristic of an n-CdS/p-CdTe heterostructure before and after irradiation is described by two exponential dependences: I = I{sub 01}exp(qV/C{sub 01}kT) and I = I{sub 02}exp(qV/C{sub 02}kT). It is found that, in the first portion of the current-voltage characteristic, the current is limited by thermoelectronic emission while, in the second portion, the current is limited by recombination of nonequilibrium charge carriers in the electrically neutral portion of a CdTe{sub 1-x}S{sub x} alloy at the n-CdS/p-CdTe heteroboundary. Anomalous dose dependences of parameters of the n-CdS/p-CdTe heterosystem are attributed to a variation in the degree of compensation of local centers at the CdS-CdTe{sub 1-x}S{sub x} interface and in the CdTe{sub 1-x}S{sub x} layers in relation to the dose of irradiation with {gamma}-ray photons.

36 MATERIALS SCIENCE↗

A Molten Salt Electrochemical Process for the Preparation of Cost-Effective p-Block (Coating) Materials

Solar energy applications rely heavily on p-block elements and transition metals. Silicon is, by far, the most commonly used material in photovoltaic cells and accounts for about 85% of modules sold presently. Of late, thin film photovoltaic cells have gained momentum because of their higher efficiencies. Most of these thin film devices are made out of just five elements, namely, cadmium, tellurium, selenium, indium, gallium and copper. The present manuscript describes an elegant and inexpensive molten salt-based electrolytic process for fabricating a tellurium-coated metallic substrate. A three-electrode set up was employed to coat iridium with tellurium from a molten bath containing lithium chloride, lithium oxide and tellurium tetrachloride (LiCl-Li 2 O-TeCl 4 ) at 650 °C for a duration ranging from 30 to 120 min under a galvanostatic mode. The tellurium coating was observed to be thick, uniform, smooth and homogeneous. Additionally, the deposited tellurium did not chemically react with the iridium substrate to form intermetallic compounds, which is a good feature from the standpoint of the device’s performance characteristics. The present process, being generic in nature, shows the potential for the manufacture of both the coated substates and high-purity elements not just for tellurium but also for other p-block elements.

36 MATERIALS SCIENCE↗

Assessment of Te as a U-Zr fuel additive to mitigate fuel-cladding chemical interactions

Tellurium was investigated as a potential additive to metallic fuel (e.g. U-10Zr) to mitigate fuel-cladding chemical interaction (FCCI). A primary cause of FCCI is the lanthanide fission products migrating to the fuel periphery and interacting with cladding, Te therefore was used to bind the lanthanides into stable compounds in the U-10Zr. The present work investigates the microstructures of as-cast and annealed U-10Zr-4Te and U-10Zr-4Te-4Ce alloys (weight percent) with scanning electron microscope and transmission electron microscopy. In conclusion, tellurium was found to bind Ce and form CeTe compound, which will mitigate lanthanides migration to the cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RAPID QUANTITATION OF URANIUM FROM MIXED FISSION PRODUCT SAMPLES

Chemical similarities between U(VI) and Mo(VI) create challenges for separation and quantification of uranium from a mixed fission product sample. The purpose of this work was to demonstrate the feasibility of using Eichrom’s® UTEVA resin in addition to a tellurium spontaneous deposition to improve the quantitation of 235U using gamma spectroscopy. The optimized method demonstrated a consistent chemical yield of 74 ± 3 % for uranium. This procedure was evaluated using 1.41x1012 fissions produced from an irradiated HEU sample. The uranium was isotopically yielded by HPGe, and the minimum detectable activity (MDA) determined from the gamma spectra. The MDA for 235U, 237U, and 238U was reduced by a factor of two. The chemical isolation of uranium was successfully achieved in less than four hours, with a separation factor of 1.41x105 from molybdenum.

Haney, Morgan M.↗

Tellurium precipitates in (Cd,Mn)Te:V crystals: Effects of annealing

We suggest that (Cd,Mn)Te is a suitable material for fabricating gamma- and X-ray detectors. Our investigations, reported here, are focused on producing high-quality (Cd,Mn)Te crystals with high resistivity (10{sup 9} {Omega}-cm) by the Bridgman method. As-grown, undoped (Cd,Mn)Te crystals are typically p-type, signifying that they contain excess Cd vacancies (acting as acceptors), accumulated during growth. Doping with vanadium atoms, which function as compensating centers, results in a semi-insulating material (Cd,Mn)Te:V. Properly annealing the platelets in cadmium vapors at uniform temperature reduces the number of cadmium vacancies, and lowers the level of the vanadium doping required for compensation. We found that annealing in cadmium vapors not only decreases the concentration of the native cadmium vacancies but also improves the crystal's quality. Infrared observations of the interior of the samples show that annealing in a temperature gradient perpendicular to the platelet has an additional effect, viz., the tellurium precipitates migrate towards the side where the temperature is higher. We demonstrate, with IR pictures of monocrystalline (Cd,Mn)Te:V platelets cut parallel to the (111) crystal planes, the influence on tellurium inclusions and precipitates of various conditions of annealing in cadmium vapors.

36 MATERIALS SCIENCE↗

Diffusion behavior of lanthanide-additive compounds (Ce 4 Sb 3 , Ce 2 Sb, and CeTe) against HT9 and Fe

Antimony and tellurium have been identified as promising additives in metallic fuel, which can immobilize free-lanthanide fission products into stable intermetallic compounds in order to mitigate the fuel-cladding chemical interaction. Ce 4 Sb 3 , Ce 2 Sb, and CeTe are the primary compounds formed by Sb or Te with the lanthanide Ce present in the fuel. If these compounds are present at the outer periphery of the fuel, they will come in contact with and react with the cladding after the fuel swells. The present study investigates the reactivity of these compounds with two cladding materials, HT9 and Fe. The diffusion couple tests between these compounds and HT9 or Fe were conducted at 853 K. Scanning electron microscopy and transmission electron microscopy were used to analyze the morphology, microstructure, and phase distribution of the diffusion region. It was observed that the diffusion region thickness formed by the three compounds was significantly reduced compared to free Ce. Moreover, there was no observed diffusion or reaction between Ce 4 Sb 3 or Ce 2 Sb with either HT9 or Fe. CeTe was found to diffuse and react with HT9, forming Cr 3 Te 4 and TeFe at the diffusion region, as well as to penetrate into Fe, mainly by intergranular diffusion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The effect of different annealing temperatures on tin and cadmium telluride phases obtained by a modified chemical route

Graphical abstract: Display Omitted Highlights: ► Synthesis of cadmium and tin telluride. ► Chemical route to obtain pure crystalline cadmium and tin telluride. ► Effect of the annealing temperature on the crystalline phases. ► Removal of tin oxide as side product through thermal treatment. -- Abstract: In this work tin and cadmium telluride were prepared by a modification of a chemical route reported in the literature to obtain metallacycles formed by oxidative addition of tin-tellurium bonds to platinum (II). Through this procedure it was possible to obtain tin and cadmium telluride. X-ray diffraction and X-ray photoelectron spectroscopy were used to identify the crystalline phases obtained as well as the presence of side products. In the case of tin telluride it was identified potassium chloride, metallic tellurium and tin oxide as contaminants. The tin oxidation states were also monitored by {sup 119}Sn Mössbauer spectroscopy. The annealing in hydrogen atmosphere was chosen as a strategy to reduce the tin oxide and promote its reaction with the excess of tellurium present in the medium. The evolution of this tin oxide phase was studied through the annealing of the sample at different temperatures. Cadmium telluride was obtained with high degree of purity (98.5% relative weight fraction) according to the Rietveld refinement of X-ray diffraction data. The modified procedure showed to be very effective to obtain amorphous tin and cadmium telluride and the annealing at 450 °C has proven to be useful to reduce the amount of oxide produced as side product.

36 MATERIALS SCIENCE↗