Search NASA⌕ Search

SEARCH · Search NASA

Results for “TEMPERATURE RANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Analysis of Er{sup 3+} and Ho{sup 3+} codoped fluoroindate glasses as wide range temperature sensor

Graphical abstract: The sensor sensitivity as a function of the temperature of erbium and holmium doped fluoroindate glasses. A wide temperature range from 20 K to 425 K is covered with a sensitivity larger than 0.0005. Highlights: {yields} The FIR technique has been carried out in fluoroindate glass sample. {yields} The Er doped fluoroindate sample has a maximum sensitivity of 0.0028 K{sup -1} at 425 K. {yields} The Ho doped fluoroindate sample has a maximum sensitivity of 0.0036 K{sup -1} at 59 K. -- Abstract: The fluorescence intensity ratio technique for two fluoroindate glass samples has been carried out. The green emissions at 523 nm and at 545 nm in a 0.1 mol% of Er{sup 3+} doped fluoroindate glass was studied in a wide range of temperature from 125 K to 425 K with a maximum sensitivity of 0.0028 K{sup -1} for 425 K. In a sample doped with 0.1 mol% of Ho{sup 3+} the emissions at 545 nm and at 750 nm were analyzed as a function of temperature from 20 K to 300 K obtaining a maximum sensitivity of 0.0036 K{sup -1} at 59 K. Using both fluoroindate glass samples a wide temperature range from 20 K to 425 K is easily covered pumping with two low-cost diode laser at 406 nm and 473 nm.

36 MATERIALS SCIENCE↗

Advanced electrolytes for fast-charging high-voltage lithium-ion batteries in wide-temperature range

LiNixMnyCo1-x-yO2 (NMC) cathode materials with Ni=0.8 have attracted great interest for application in high energy-density lithium (Li)-ion batteries (LIBs) because of their high specific capacities at high voltages. However, the practical application of Ni-rich NMC in LIBs under high charge voltages (e.g. 4.4 V and above) still faces big challenges due to the severe capacity fading, which is directly related to the instability of the cathode/electrolyte interface. In this work, we develop new localized high-concentration electrolytes (LHCEs) based on carbonate solvents, which are compatible with graphite (Gr) anode and have a high oxidation potential over 4.9 V vs. Li/Li+. The optimal LHCE enables the Gr||NMC811 cells with 2.8 mAh cm-2 cathode areal capacity loading to achieve an excellent cycling stability over 600 cycles with a capacity retention of 94.2 % under a charge cut-off voltage of 4.4 V at 25 ?C, good rate capabilities under fast charging or discharging up to 3C rate, and superior low-temperature discharge performance down to -30 ?C with a capacity retention of 85.6% at C/5 rate. The findings in this work shed light a very promising strategy to develop new electrolytes for practical high-energy LIBs with Ni-rich NMC cathodes.

Zhang, Xianhui↗

Magnetoresistance Hysteresis Evolution in the Granular Y–Ba–Cu–O High-Temperature Superconductor in a Wide Temperature Range

The temperature evolution of the magnetoresistance hysteresis in the granular YBa{sub 2}Cu{sub 3}O{sub 7-δ} high-temperature (T{sub C} ≈ 92 K) superconductor has been investigated. The measurements have been performed in the high-temperature region (78–90 K) and at the liquid helium temperature (4.2 K). The results obtained have been analyzed using the developed model of the behavior of transport properties of a granular high-temperature superconductor in an external magnetic field. Within the discussed model, the dissipation of the grain boundary subsystem is determined by the intergrain spacing-averaged effective field B{sub eff}, which is a superposition of external field H and the field induced by the magnetic moments of superconducting grains. Such a consideration yields the expression B{sub eff}(H) = H − 4πM(H) α for the effective field in the intergrain medium, where M(H) is the experimental hysteretic dependence of magnetization and α is the parameter of magnetic flux crowding in the intergrain medium. Here, the magnetoresistance is assumed to be proportional to the absolute value of the effective field: R(H) ~ |B{sub eff}(H)|. Analysis of the experimental R(H) and M(H) dependences obtained under the same conditions for the investigated high-temperature superconductor sample showed that in the high-temperature region this parameter is α ≈ 25. At the low temperature (4.2 K), we may state that the degree of flux crowding increases and the estimated α value is ~ 50. The estimates made are indicative of the strong effect of flux compression in the intergrain medium on the magnetotransport properties of the investigated granular high-temperature superconductor system. Possible reasons for a discrepancy between the developed model concepts and experimentally observed low-temperature R(H) hysteresis are analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistive Coatings for High-performance, Low-background MCPs Operating Across Broad Temperature Ranges and at Cryogenic Temperatures

Microchannel plate with improved thermo-electric properties are a high risk, high payoff development undertaken by a consortium of effort that links the Argonne National Lab, the Space-Science Lab at UC Berkeley and the small businesses (Incom Inc.) that will commercialize the advanced technology in open MCPs and LAPPDs. This development will satisfy the needs for new instrumentation for homeland security (non-proliferation) sensors to screen vehicles and cargo for Special Nuclear Materials (SNMs) and scientific detectors for astrophysics, electron microscopy, time-of-flight mass spectrometry, molecular and atomic collision studies, and fluorescence imaging applications in biotechnology and medical imaging products including positron emission tomography (PET scanning).

99 GENERAL AND MISCELLANEOUS↗

Pyroelectric Properties of Potassium and Rubidium Titanyl-Arsenate Single Crystals in the Temperature Range of 4.2-300 K

The temperature dependences of the pyroelectric coefficients of KTiOAsO{sub 4} and RbTiOAsO{sub 4} single crystals grown by flux crystallization have been investigated in the temperature range of 4.2-300 K. With an increase in temperature, superionic conductivity first arises in KTiOAsO4 (at T > 200 K) and then (at T > 270 K) in RbTiOAsO{sub 4}. This conductivity is much higher in the samples polarized at T = 4.2 K. An exponential change in the crystal resistivity along the polar direction is simultaneously observed. The results of measurements in the range of 4.2-200 K indicate larger values of pyroelectric coefficients when compared with potassium and rubidium titanyl-phosphate crystals. A correlation between the pyroelectric coefficients and a change in the lattice constants at isomorphic substitutions of K atoms for Rb and P atoms for As has been revealed within the symmetry approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of glass composition on activation energy of viscosity in glass-melting-temperature range

In the high-temperature range, where the viscosity (Eta) of molten glass is <10{sup 3} Pa s, the activation energy (B) is virtually ln(Eta) = A + B/T, is nearly independent of melt composition. Hence, the viscosity-composition relationship for Eta < 10{sup 3} Pa s is defined by B as a function of composition. Using a database encompassing over 1300 compositions of high-level waste glasses with nearly 7000 viscosity data, we developed mathematical models for B(x), where x is the composition vector in terms of mass fractions of components. In this paper, we present 13 versions of B(x) as first- and second-order polynomials with coefficients for 15 to 39 components, including Others, a component that sums constituents having little effect on viscosity.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microwave losses in MgO, LaAlO{sub 3}, and (La{sub 0.3}Sr{sub 0.7})(Al{sub 0.65}Ta{sub 0.35})O{sub 3} dielectrics at low power and in the millikelvin temperature range

We have investigated both the temperature and the power dependence of microwave losses for various dielectrics commonly used as substrates for the growth of high critical temperature superconductor thin films. We present measurement of niobium superconducting λ∕2 coplanar waveguide resonators, fabricated on MgO, LaAlO{sub 3}, and (La{sub 0.3}Sr{sub 0.7})(Al{sub 0.65}Ta{sub 0.35})O{sub 3} (LSAT), at the millikelvin temperature range and at low input power. By comparing our results with the two-level system model, we have discriminated among different dominant loss mechanisms. LSAT has shown the best results as regards the dielectric losses in the investigated regimes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploiting ultra-large linear elasticity over a wide temperature range in nanocrystalline NiTi alloy

Many shape memory alloys can support large recoverable strains of a few percent by reversible stress-induced martensite transformation, yet they behave non-linear within a narrow operating temperature range. Developing the bulk metallic materials with ultra-large linear elasticity over a wide temperature range has proven to be difficult. In this work, a material design concept was proposed, that is true elastic deformation and reversible twinning-detwinning deformation run in parallel to overcome this challenge. By engineering the residual internal stress to realize the concurrency of true elastic deformation and twinning-detwinning deformation, a bulk nanocrystalline NiTi that possesses an ultra-large linear elastic strain up to 5.1 % and a high yield stress of 2.16 GPa over a wide temperature range of 270 °C was developed. This study offers a new avenue for developing the metallic materials with ultra-large linear elasticity over a wide temperature range of 270 °C (from 70 °C to -197 °C).

36 MATERIALS SCIENCE↗

A record high average ZT over a wide temperature range in a Single-layer Sb 2 Si 2 Te 6

Conversion of waste heat into usable energy requires development of thermoelectric materials with high efficiency in a wide temperature range. Here, using first principles theory and Boltzmann transport theory, we show that the thermoelectric performance of the p-type single-layer Sb 2 Si 2 Te 6 has a high figure of merit ZT of 2.62 at 900 K and a record high average ZT of ~1.93 (corresponding the conversion efficiency of ~23.2%) in the temperature range of 300-900 K. These values are significantly higher than the recently measured average ZT of ~0.57 in the temperature range of 310–823 K [Luo et al., Joule 4, 159–175 (2020)] in layered bulk Sb 2 Si 2 Te 6 . We attribute the large enhancement of ZT in the single layer material to the increase in the thermoelectric power factor resulting from the complex Fermi surface. Our work reveals the great potential of a single-layer Sb 2 Si 2 Te 6 for wide-temperature-range thermoelectric applications.

36 MATERIALS SCIENCE↗

Electroluminescence of InAs/InAs(Sb)/InAsSbP LED heterostructures in the temperature range 4.2–300 K

The electroluminescence of InAs/InAsSbP and InAsSb/InAsSbP LED heterostructures grown on InAs substrates is studied in the temperature range T = 4.2–300 K. At low temperatures (T = 4.2–100 K), stimulated emission is observed for the InAs/InAsSbP and InAsSb/InAsSbP heterostructures with an optical cavity formed normal to the growth plane at wavelengths of, respectively, 3.03 and 3.55 μm. The emission becomes spontaneous at T > 70 K due to the resonant “switch-on” of the CHHS Auger recombination process in which the energy of a recombining electron–hole pair is transferred to a hole, with hole transition to the spin–orbit-split band. It remains spontaneous up to room temperature because of the influence exerted by other Auger processes. The results obtained show that InAs/InAs(Sb)/InAsSbP structures are promising for the fabrication of vertically emitting mid-IR lasers.

36 MATERIALS SCIENCE↗

Thermomagnetic properties of Bi 2 Te 3 single crystal in the temperature range from 55 K to 380 K

Magnetothermoelectric transport provides an understanding of coupled electron-hole-phonon current in topological materials and has applications in energy conversion and cooling. In this paper, we study the Nernst coefficient, the magneto-Seebeck coefficient, and the magnetoresistance of single-crystalline Bi 2 Te 3 under external magnetic field in the range of –3T to 3T and in the temperature range of 55 K to 380 K. Moreau's relation is employed to justify both the overall trend of the Nernst coefficient and the temperature at which this coefficient changes sign. We observe a nonlinear relationship between the Nernst coefficient and the applied magnetic field in the temperature range of 55 K to 255 K. An increase in both the Nernst coefficient and the magneto-Seebeck coefficient is observed as the temperature is reduced which can be attributed to the increased mobility of the carriers at lower temperatures. First-principles density functional theory calculations were carried out to physically model the experimental data including electronic and transport properties. Simulation findings agreed with the experiments and provide a theoretical insight to justify the measurements.

36 MATERIALS SCIENCE↗

High Damping of Lightweight TiNi-Ti{sub 2}Ni Shape Memory Composites for Wide Temperature Range Usage

A bimodal porous TiNi-Ti{sub 2}Ni shape memory alloy composite (SMAC) with 59% porosity was fabricated by sintering Ti-46at.%Ni elemental powders with pore-forming agent. The porous TiNi-Ti{sub 2}Ni SMAC contains two irregular pores of about 400 and 120 μm. We investigated the microstructure and pore morphology correlated with the mechanical properties and damping capacities of the SMAC. Ti{sub 2}Ni intermetallic phases with size of 1-3 μm were homogeneously distributed in the TiNi matrix. The porous TiNi-Ti{sub 2}Ni SMAC exhibits exceptionally high inverse mechanical quality factor (Q{sup −1}) of ~0.25 at < 40 °C, which is among the highest value reported for porous/dense shape memory alloys or composites to best of our knowledge, and it shows very high compressive fracture strain of about 25%. Moreover, the fabricated porous SMAC at relatively low strain amplitude can exhibit considerable high Q{sup −1} of 0.06 ~ 0.11 for a wide range of temperature between − 90 and 200 °C, which is attributed to the stress concentration distribution provided by the bimodal structure of pores and the massive interfaces between pore/matrix and TiNi/Ti{sub 2}Ni. These porous SMACs can be an ideal candidate for using as a lightweight damping material in the energy-saving applications.

36 MATERIALS SCIENCE↗

Nanostructural evolution of Al(OH)3 gel formed by the cubic and orthorhombic ye'elimite clinkers of calcium sulfoaluminate cements in an ultra-wide hydration temperature range

This paper investigated the influence of hydration temperature on the nanostructure of the AH{sub 3} phase formed in calcium sulfoaluminate cements. Orthorhombic ye'elimite (st-ye'elimite) and cubic ye'elimite (ss-ye'elimite) were hydrated in an ultra-wide temperature range (5–220 °C). Results showed that the AH{sub 3} phase formed by ss-ye'elimite was always microcrystalline in nature at various curing temperatures (5–130 °C), and transformed into the AlOOH phase at 150 °C and above. However, the AH{sub 3} phase formed by st-ye'elimite grew from a microcrystal to a favorable crystal as the temperature increased, and transformed into the AlOOH phase at 170 °C and above. The nanostructure of hydration products was further investigated using TEM/SAED analysis together with FE-SEM images, directly evidencing that the formed AFm-12 phase was single-crystal in nature, and the formed AH{sub 3} phase was microcrystalline at low temperatures and grew into single-crystal hexagonal prisms with the preferred growth direction along [001] direction at high temperatures.

36 MATERIALS SCIENCE↗

The Effect of a Pre-Lens Aperture on the Temperature Range and Image Uniformity of Microbolometer Infrared Cameras

This paper explores the temperature range extension of long-wavelength infrared (LWIR) cameras by placing an aperture in front of the lens. An aperture smaller than the lens will reduce the radiance to the sensor, allowing the camera to image targets much hotter than typically allowable. These higher temperatures were accurately determined after developing a correction factor which was applied to the built-in temperature calibration. The relationship between aperture diameter and temperature range is linear. The effect of pre-lens apertures on the image uniformity is a form of anti-vignetting, meaning the corners appear brighter (hotter) than the rest of the image. An example of using this technique to measure temperatures of high melting point polymers during 3D printing provide valuable information of the time required for the weld-line temperature to fall below the glass transition temperature.

3D Printing↗