Search NASA⌕ Search

SEARCH · Search NASA

Results for “THORIUM 210”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Nuclear Data Sheets for A = 210

Evaluated spectroscopic data for {sup 210}Au, {sup 210}Hg, {sup 210}Tl, {sup 210}Pb, {sup 210}Bi, {sup 210}Po, {sup 210}At, {sup 210}Rn, {sup 210}Fr, {sup 210}Ra, {sup 210}Ac, and {sup 210}Th and corresponding level schemes from radioactive decay and reaction studies are presented. This evaluation supersedes the previous evaluation by E. Browne (2003Br13). Highlights of this publication are the identification of new μs isomers of {sup 210}Hg by 2013Go10 and measurement of an excited level energy at 1709 keV 30 of {sup 210}Rn from {sup 214}Rn α decay: 68.6 μs by 2006Ku26 denoted as x+1664.6 in the Adopted Levels. Earlier experimental limits for x≤50 keV was proposed in 1979Po19 and 1982Po03 – (HI,xnγ)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Background analysis and status of the ANAIS dark matter project

ANAIS (Annual modulation with NaI Scintillators) is a project aiming to set up at the new facilities of the Canfranc Underground Laboratory (LSC), a large scale NaI(Tl) experiment in order to explore the DAMA/LIBRA annual modulation positive result using the same target and technique. Two 12.5 kg each NaI(Tl) crystals provided by Alpha Spectra took data at the LSC in the ANAIS-25 set-up. The comparison of the background model for the ANAIS-25 prototypes with the experimental results is presented. ANAIS crystal radiopurity goals have been achieved for {sup 232}Th and {sup 238}U chains, but a {sup 210}Pb contamination out-of-equilibrium was identified, whose origin has been studied. The high light collection efficiency obtained with these prototypes allows to anticipate an energy threshold of the order of 1 keVee. A new detector, with improved performances, was received in March 2015 and very preliminary results are shown.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

A Method for Understanding the Behaviour of Radioactive Decay Chains in Radiological Assessments - 19382

In many radiological groundwater pathway assessments, especially those where the assessment timescales of interest are relatively short (say a few thousand years or less), contributions to effective dose or radiological risk are dominated by radionuclides such as C-14, Cl-36 or I-129. Over longer timescales, additional radionuclides can also become key contributors to risk. In particular, members of the U-238 decay chain, notably Ra-226 and Pb-210, are likely to be key radionuclides. Other decay chains that can contribute significantly to dose or risk at times far into the future include Np-237 → U-233 → Th-229 and U-235 → Pa-231 → Ac-227. In this paper, a method is described for understanding decay chain behaviour in radiological assessments. The method uses a graphical approach in which the various modes of transport and decay in a system of connected compartments are represented as pathways between two nodes in a two-dimensional grid. Each pathway corresponds to a distinct transport and decay process. By so doing, the different transport and decay processes can be identified in a systematic way. The result is an algorithm for generating the contributions to effective dose or radiological risk without explicit solution of the transport equations. The method has been tested against numerical models and analytic solutions and found to give excellent agreement, while at the same time providing information about decay chain behaviour that would be difficult to obtain from a numerical assessment model. The power of the method is illustrated by applying it to some examples based on real repository concepts. (authors)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

A Rapid Sequential Separation Method for Determination of Actinides and TENORM in Fracking Wastes - 20223

With recent advances in unconventional drilling technology in the US and around the world, the risks of environmental contamination and exposure due to technologically enhanced naturally occurring radioactive materials (TENORM) from fracking wastes have also surfaced. Although the Permian Basin (southeastern New Mexico, western Texas) has long been a modest producer of oil, the advent of fracking technology a decade ago turned it into hot property for producers. A 2018 assessment of undiscovered, technically recoverable continuous oil and gas resources by the U.S. Geological Survey estimates an average 46.3 billion barrels of oil and 281 trillion cubic feet of gas. This is likely to increase the use of unconventional drilling and TENORM generation. TENORM concentrations in oil and gas exploration and production waste can be several hundred to several thousand times higher than background TENORM concentrations. Both the thorium and uranium decay chains contribute to airborne radionuclides arising from the radon gas escaping the ground and subsequently decaying as airborne particulates. Additionally, radon decay products {sup 210}Pb and {sup 210}Po can build up in scale on the internal surfaces of oil and gas handling pipes and in sludge in refineries, becoming potential inhalation and ingestion hazards for workers. Furthermore, southeastern NM is also home to world's only licensed and operating transuranic nuclear waste repository, the DoE's Waste Isolation Pilot Plant (WIPP). Plutonium isotopes ({sup 239+240}Pu) and {sup 241}Am, are expected to account for more than 99% of the total radioactivity scheduled for disposal in the WIPP repository. Thus, an improved understanding of the environmental fate and transport of TENORM, liberated by unconventional drilling, is essential to assess how best to protect individuals and the environment. In this context, accurate measurement of TENORM and actinides in environmental and biological samples is essential. In this presentation, a new sequential method for the separation and pre-concentration of actinides (Pu, Am, Np) and TENORM (Po, U and Th) derived from oil and gas exploration is proposed. The TEVA method involves a rapid co-precipitation step to remove matrix interferences from the samples, followed by plutonium oxidation state adjustment to Pu (IV) and an incubation period of ∼ 1 hour at 50-60 deg. C to allow the resultant Po (II) to oxidize into Po(IV). The polonium, neptunium, thorium and plutonium are then separated on a TEVA column, while americium and uranium are separated on a TRU column. After separation, the alpha counting source was prepared by micro-precipitation with copper sulfide (CuS) for polonium and neodymium fluoride (NdF{sub 3}) for actinides. The efficiency and reliability of the procedures were tested by analyzing filter, drinking water and frack sand samples. The method is simple, robust and can be performed quickly with excellent removal of interferences, high chemical recovery and very good alpha peak resolution. (authors)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Membrane-based solvent extraction for the recovery of rare earths from phosphate mining process streams

This study reports on the capture of rare earth elements (REEs) from phosphate industry process streams, including phosphoric acid (PA) sludge and phosphogypsum (PG), using a membrane solvent extraction (MSX) process. While MSX has been proven effective for a relatively concentrated feed, its effectiveness for dilute REEs solutions remains unexplored. Investigated PA-sludge and PG particles contain total REEs concentrations of ∼1100 and ∼320 ppm, respectively. Acid leaching, implemented to dissolve the REEs, significantly dilutes the REEs concentration to ∼210 ppm for PA-sludge leachate and ∼60 ppm for PG leachate. These low concentrations, compounded by the higher levels of non-REE ions and radioactive species, uranium (U) and thorium (Th), poses challenges to the MSX process. Here, we demonstrated that N,N,N′,N′-tetraoctyl-diglycolamide (TODGA) selectively binds REEs from a >3 M nitric-acid leachate while effectively rejecting U and Th. Concentrations of light REEs in strip solution were doubled compared to the feed, while heavy REEs were preferentially extracted. Furthermore, >99% purity gypsum, free of U and Th, was precipitated during the acid leaching process, aiding separation by removing significant amounts of non-REEs species (e.g., calcium) prior to the MSX process. Molecular simulations support the experimental data, suggesting preferential separation of heavy over light REEs. Based on these results, a cost-effective integrated process including pretreatment, acid leaching, MSX, and wastewater treatment is proposed for the co-recovery of REEs, phosphoric acid, gypsum, and U. This study shows MSX as a technically and economically feasible process for the recovery of REEs from low-concentration process streams, offering advantages over conventional solvent extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Environmental evaluation of radioactivity levels and associated radiation hazards in groundwater around the WIPP site

Groundwater may contain radioactive substances which can be dangerous to human health. Concentrations of natural radionuclides polonium (Po), thorium (Th), uranium (U), and radium (Ra) isotopes were measured in groundwater samples collected from different locations in the vicinity of the Waste Isolation Pilot Plant (WIPP) site in Carlsbad, New Mexico. The average values of gross activity concentrations of 210 Po, 228 Th, 238 U, 234 U, 226 Ra and 228 Ra isotopes were determined to be 1.62 Bq L -1 in shallow groundwater and 5.88 Bq L -1 in deep groundwater, respectively. The total radioactivity in deep groundwater was higher than that in shallow groundwater, and most of the radioactivity in the water is from 226 Ra. Furthermore, the effective doses for ingestion of natural radionuclides were about 0.333 mSv y–1 for shallow groundwater and about 1.338 mSv y –1 for deep groundwater samples, which are higher than the World Health Organization (WHO, 2017) guideline level (0.1 mSv y –1 ) for drinking water. Ra dominated the total ingestion dose, contributing 93.06 % and 75.40 % of the total effective doses to the deep and shallow groundwater, respectively. The ingrowth and decay of natural radionuclides suggested that 228 Ra/ 226 Ra ratio can be a useful indicator of the source of radioactive contamination. The radioactivity data obtained from the investigated groundwater samples can be used to establish a baseline for radioactivity levels in groundwater around the WIPP site.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2015

Measurement of Radioactive Contamination in the High-Resistivity Silicon CCDs of the DAMIC Experiment

We present measurements of radioactive contamination in the high-resistivity silicon charge-coupled devices (CCDs) used by the DAMIC experiment to search for dark matter particles. Novel analysis methods, which exploit the unique spatial resolution of CCDs, were developed to identify α and β particles. Uranium and thorium contamination in the CCD bulk was measured through α spectroscopy, with an upper limit on the 238 U ( 232 Th) decay rate of 5 (15) kg -1 d -1 at 95% CL. We also searched for pairs of spatially correlated electron tracks separated in time by up to tens of days, as expected from 32 Si – 32 P or 210 Pb – 210 Bi sequences of b decays. The decay rate of 32Si was found to be 80 +110 -65 (95% CI). An upper limit of ~35 kg -1 d -1 (95% CL) on the 210 Pb decay rate was obtained independently by α spectroscopy and the β decay sequence search. Furthermore, these levels of radioactive contamination are sufficiently low for the successful operation of CCDs in the forthcoming 100 g DAMIC detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗