Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Synthesis and Isolation of the Titanium-Scandium Endohedral Fullerenes-Sc 2 TiC@ I h -C 80 , Sc 2 TiC@ D 5 h -C 80 and Sc 2 TiC 2 @ I h -C 80 : Metal Size Tuning of the Ti IV /Ti III Redox Potentials

The formation of endohedral metallofullerenes (EMFs) in an electric arc is reported for the mixed-metal Sc–Ti system utilizing methane as a reactive gas. Comparison of these results with those from the Sc/CH 4 and Ti/CH 4 systems as well as syntheses without methane revealed a strong mutual influence of all key components on the product distribution. Whereas a methane atmosphere alone suppresses the formation of empty cage fullerenes, the Ti/CH4 system forms mainly empty cage fullerenes. In contrast, the main fullerene products in the Sc/CH4 system are Sc 4 C 2 @C 80 (the most abundant EMF from this synthesis), Sc 3 C 2 @C 80 , isomers of Sc 2 C 2 @C 82 , and the family Sc 2 C 2n (2 n=74, 76, 82, 86, 90, etc.), as well as Sc 3 CH@C 80 . The Sc–Ti/CH 4 system produces the mixed-metal Sc 2 TiC@C 2n (2 n=68, 78, 80) and Sc 2 TiC 2 @C 2n (2 n=80) clusterfullerene families. The molecular structures of the new, transition-metal-containing endohedral fullerenes, Sc 2 TiC@Ih-C 80 , Sc 2 TiC@D 5h -C 80 , and Sc 2 TiC 2 @I h -C 80 , were characterized by NMR spectroscopy. The structure of Sc 2 TiC@I h -C 80

Chemistry↗

Comparative investigation on microstructures and mechanical properties of (TiB + TiC)/Ti-6Al-4V composites from Ti-B4C-C and Ti-TiB2-TiC systems

Highlights: • The (TiB{sub w}+TiC{sub p})/Ti-6Al-4V composites were fabricated from Ti-B{sub 4}C-C and Ti-TiB{sub 2}-TiC systems by reactive hot-pressed sintering. • Microstructures and mechanical properties of the two kinds of composites were comparatively investigated. • The composites from Ti-TiB{sub 2}-TiC system possess higher elastic modulus and Vickers hardness than those from Ti-B{sub 4}C-C system. • The composites from Ti-TiB{sub 2}-TiC system have higher bending strength than the other system while employing same conditions. • The composites from Ti-B{sub 4}C-C system present better abrasion resistance than those from Ti-TiB{sub 2}-TiC system. - Abstract: Two percentages of TiB + TiC reinforced Ti-6Al-4V composites from Ti-B{sub 4}C-C and Ti-TiB{sub 2}-TiC systems were fabricated by reactive hot-pressed sintering. Their microstructures and mechanical properties involving elastic modulus, Vickers hardness, bending strength and wear property were investigated comparatively. The experimental results show that needle-like TiB whiskers and near-equiaxed TiC particles are evenly distributed in the Ti-6Al-4V matrix. The mechanical properties of the (TiB + TiC)/Ti-6Al-4V composites are closely related with the nominal composition and synthesis system of TiB + TiC reinforcement and the microstructures of composites. With increasing the nominal volume fraction of reinforcement, both elastic modulus and Vickers hardness increase more or less and the bending strength decreases in varying degrees. A certain increase of pores in the composites with the sintering temperature increasing to 1300 °C can markedly affect the bending strength. Moreover, no matter what the sintering temperature and nominal volume fraction of reinforcement, the elastic modulus and Vickers hardness of composites from the Ti-TiB{sub 2}-TiC system are higher than those from the Ti-B{sub 4}C-C system. Similarly, the composites from the Ti-B{sub 4}C-C system present better abrasion resistance than those from the Ti-TiB{sub 2}-TiC system due to the difference of interfacial bonding between the TiC particles and Ti-6Al-4V matrix in the two kinds of composites.

36 MATERIALS SCIENCE↗

Novel Au-TiC Catalysts for CO Oxidation and Desulfurization Processes

Recent articles dealing with the physical and chemical properties of novel Au-TiC catalysts are reviewed. High-resolution photoemission, scanning tunneling microscopy and first-principles periodic density-functional calculations were used to study the deposition of gold on a TiC(0 0 1) surface. Gold grows forming two-dimensional (very low coverage) and three-dimensional (medium and large coverage) islands on the carbide substrate. A positive shift in the binding energy of the C 1s core level is observed after the deposition of Au on TiC(0 0 1). The results of the density-functional calculations corroborate the formation of Au-C bonds. In general, the bond between Au and the TiC(0 0 1) surface exhibits very little ionic character, but there is a substantial polarization of electrons around Au that facilitates bonding of the adatoms with electron-acceptor molecules (CO, O{sub 2}, C{sub 2}H{sub 4}, SO{sub 2}, thiophene, etc.). Experimental measurements indicate that Au/TiC(0 0 1) is a very good catalysts for the oxidation of CO, the destruction of SO{sub 2} and the hydrodesulfurization of thiophene. At temperatures below 200 K, Au/TiC(0 0 1) is able to perform the 2CO + O{sub 2} {yields} 2CO{sub 2} reaction and the full decomposition of SO{sub 2}. Furthermore, in spite of the very poor hydrodesulfurization performance of TiC(0 0 1) or Au(1 1 1), a Au/TiC(0 0 1) surface displays a hydrodesulfurization activity higher than that of conventional Ni/MoS{sub x} catalysts. Metal carbides are excellent supports for enhancing the chemical reactivity of gold. The Au/TiC system is more chemically active than systems generated by depositing Au nanoparticles on oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multifunctional Pd-Sn electrocatalysts enabled by in situ formed SnOx and TiC triple junctions

This paper describes an in situ formed, triple junction structured PdSn electrocatalyst dispersed on a stable conductive TiC surface. Through extensive characterization and computational modeling, we show that the multicomponent catalyst forms a unique PdSn/SnOx/TiC triple junction structure. This structure stabilizes Pd and promotes its catalytic performance toward a model reaction, formic acid oxidation. Computational modeling suggests that the triple junction structure is the most stable configuration that provides desired anchoring sites for Pd and enables a favorable synergy between the multicomponents Pd, Sn, SnOx, and TiC for high activity. The triple junction structure also can provide better stability against catalysts migration, detachment, or sintering. Experimental measurements also confirm that multicomponent catalysts provide synergistic functions. The intermediate products, COads, prefer to adsorb onto the Pd sites, while the OH prefers the Sn and SnOx sites, which function together to prevent catalyst poisoning.

Dong, Qizhi↗

Study of reaction sequences during MSR synthesis of TiC by controlled ball milling of titanium and graphite

Highlights: • Insights on oxygen-bonded features formed during reactive ball milling • Evolution of off-stoichiometric TiC before ignition • Growth sequence of the TiC manifested as stacks and multilayers • Dual morphology of the MSR reaction product - Abstract: During reactive ball milling of Ti and C, mechanically induced self-propagating reaction (MSR) synthesis of TiC is reported to occur via a process including initial formation of small amounts of TiC prior to exothermic ignition, followed by MSR and the formation of stiochiometric TiC (Dorofeev et al., 2011; Oghenevweta et al., 2016 [1, 2]). However, both the chemical evolution and mechanisms of reaction and growth of TiC both prior to, during and after ignition are not fully understood. This research focuses on fundamental understanding of the reaction sequences during MSR synthesis of TiC from elemental Ti and C (graphite). Magnetically controlled ball milling of stoichiometric (1:1) powder mixtures of titanium (Ti) and graphite (C) was performed under He gas with the exothermic ignition point by determined via in-situ temperature measurement. X-ray diffraction, Scanning Transmission Electron Microscopy (STEM) with electron energy loss spectroscopy (EELS), Raman Spectroscopy and X-ray Photoelectron Spectroscopy (XPS) were employed to interpret the reaction sequences. The reaction sequence involved the following: During milling prior to ignition, severely deformed Ti, spheriodised graphite and amorphous carbon forms, and minor amounts of off-stiochiometric nano-TiC{sub 1−x} crystals. In addition to the formation of TiC{sub 1−x}, XPS revealed the formation of oxide skins coating the surface regions of the milled powders. There is also an evolution towards stiochiometric TiC with increasing milling time. Immediately after ignition, a reacted product comprising a mixture of multi-layer stacks of thin TiC plates form, in addition to a matrix comprising large TiC particles which have been liquid phase sintered under the high local heat of reaction by thin layers of unreacted Ti. MSR occurs via a dual mechanism involving rapid growth of existing TiC, plus nucleation and growth of new TiC. High spatially resolved EELS combined with STEM revealed additional information about the inhomogeneous chemical environment of the milled powders.

36 MATERIALS SCIENCE↗

Role of Au-C Interactions on the Catalytic Activity of Au Nanoparticles Supported on TiC(001) Towards Molecular Oxygen Dissociation

High-resolution photoemission and density functional calculations on realistic slab surface models were used to study the interaction and subsequent dissociation of O{sub 2} with Au nanoparticles supported on TiC(001). The photoemission results indicate that at 150 K O{sub 2} adsorbs molecularly on the supported gold nanoparticles, and upon heating to temperatures above 200 K the O{sub 2} {yields} 2O reaction takes place with migration of atomic oxygen to the TiC(001) substrate. The addition of Au to TiC(001) substantially enhances the rate of O{sub 2} dissociation at room temperature. The reactivity of Au nanoparticles supported on TiC(001) toward O{sub 2} dissociation is much larger than that of similar nanoparticles supported either on TiO{sub 2}(110) or MgO(001) surfaces, where the cleavage of O-O bonds is very difficult. Density functional calculations carried out on large supercells show that the contact of Au with TiC(001) is essential for charge polarization and an enhancement in the chemical activity of Au. Small two-dimensional particles which expose Au atoms in contact with TiC(001) are the most reactive. While O{sub 2} prefers binding to Au sites, the O atoms interact more strongly with the TiC(001) surface. The oxygen species active during the low-temperature (<200 K) oxidation of carbon monoxide on Au/TiC(001) is chemisorbed O{sub 2}. Once atomic O binds to TiC(001), the chemisorption bond is so strong that temperatures well above 400 K are necessary to remove the O adatoms from the TiC(001) substrate by direct reaction with CO. The high reactivity of Au/TiC(001) toward O{sub 2} at low-temperature opens the route for the transformation of alcohols and amines on the supported Au nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lightweight TiC–(Fe–Al) ceramic–metal composites made in situ by pressureless melt infiltration

Lightweight ceramic–metal (cermet) composites combine stiffness and hardness with fracture toughness and ductility. TiC and Al are ideal pairs among lightweight cermet composites because of their relatively high strength-to-weight ratios, but these materials are difficult to process in solid state or with Al melt infiltration without making an aluminum carbide phase, which is detrimental to mechanical properties. Here, Fe is added to a TiC powder preform to reduce the activity of Al with TiC during Al melt infiltration and to aid in pressing TiC preforms, making a lightweight TiC–(Fe–Al) composite while avoiding other, unwanted phases. The composites are made by first pressing TiC powder mixed with Fe followed by Al melt infiltration; the result is a composite with high TiC content in a two-phase matrix, both of which are Fe–Al-based. The composite has low density, low porosity, high hardness, no detectable Al 4 C 3 phase with X-ray diffraction and retains shape well during infiltration.

36 MATERIALS SCIENCE↗

Neutron irradiation-induced microstructure damage in ultra-high temperature ceramic TiC

Titanium carbide (TiC) is an ultra-high temperature ceramic with potential as a structural material candidate for advanced reactor concepts. However, the irradiation tolerance of TiC is not well understood. Here, we reveal the key irradiation damage microstructure degradation processes in TiC using mixed spectrum neutron irradiations at dose of ~2 displacements per atom (dpa) at temperatures of ~220, 620, and 1115 °C, combined with state-of-art microstructure characterization using transmission electron microscopy (TEM) and high-resolution TEM (HRTEM). The helium injection (~65 atomic parts per million) produced by neutron transmutation also occurred in the sample. TiC was observed to form irradiation-induced interstitial-type dislocation loops and He-stabilized cavities. At 220 and 620 °C, the analysis of the electron diffraction patterns, rel-rod imaging and HRTEM revealed that the dislocation loops were faulted Frank loops with Burgers vector b Frank = 1/3<111> lying on {111} planes. A detailed Burgers vector identification performed by the g.b technique revealed that the dislocation loops forming at 1115 °C were unfaulted, edge-type, with Burgers vectors b = a<100> and a/2<110> with corresponding {100} and {110} habit planes. Using continuum mechanics, we estimated the critical radius at which a faulted dislocation loop transitions to a perfect loop to be 9 nm. Further, no amorphization occurred in TiC under-investigated irradiation conditions while macroscopic swelling under point defect swelling regime was observed. He-stabilized cavities were detected at 1115 °C, but not at lower temperature irradiation. These observations indicate the onset of long-range vacancy migration in TiC occurs between 620 and 1115 °C.

36 MATERIALS SCIENCE↗

Structural studies of TiC{sub 1−x}O{sub x} solid solution by Rietveld refinement and first-principles calculations

The lattice parameters, structural stability and electronic structure of titanium oxycarbides (TiC{sub 1−x}O{sub x}, 0≤x≤1) solid solution were investigated by Rietveld refinement and first-principles calculations. Series of TiC{sub 1−x}O{sub x} were precisely synthesized by sintering process under the vacuum. Rietveld refinement results of XRD patterns show the properties of continuous solid solution in TiC{sub 1−x}O{sub x} over the whole composition range. The lattice parameters vary from 0.4324 nm to 0.4194 nm decreasing with increasing oxygen concentration. Results of first-principles calculations reveal that the disorder C/O structure is stable than the order C/O structure. Further investigations of the vacancy in Ti{sub 1−Va}(C{sub 1−x}O{sub x}){sub 1−Va} solid solution present that the structure of vacancy segregated in TiO-part is more stable than the disorder C/O structure, which can be ascribed to the Ti–Ti bond across O-vacancy and the charge redistributed around Ti-vacancy via the analysis of the electron density difference plots and PDOS. - Graphical abstract: XRD of series of titanium oxycarbides (TiC{sub 1−x}O{sub x}, 0≤x≤1) solid solution prepared by adjusting the proportion of TiO in the starting material. Highlights: • Titanium oxycarbides were obtained by sintering TiO and TiC under carefully controlled conditions. • Rietveld refinement results show continuous solid solution with FCC structure in TiC{sub 1−x}O{sub x}. • The disorder C/O structure is stable than the order C/O structure. • Introduction of vacancy segregated in TiO-part is more stable than disorder C/O structure. • Ti–Ti bond across O-vacancy and the charge redistributed around Ti-vacancy enhance structural stability.

36 MATERIALS SCIENCE↗

Study of preparation of TiB{sub 2} by TiC in Al melts

TiB{sub 2} particles are prepared by TiC in Al melts and the characteristics of them are studied. It is found that TiC particles are unstable when boron exists in Al melts with high temperature and will transform to TiB{sub 2} and Al{sub 4}C{sub 3}. Most of the synthesized TiB{sub 2} particles are regular hexagonal prisms with submicron size. The diameter of the undersurfaces of these prisms is ranging from 200 nm to 1 {mu}m and the height is ranging from 100 nm to 300 nm. It is considered that controlling the transformation from TiC to TiB{sub 2} is an effective method to prepare small and uniform TiB{sub 2} particles. - Highlights: Black-Right-Pointing-Pointer TiC can easily transform into TiB{sub 2} in Al melts. Black-Right-Pointing-Pointer TiB{sub 2} formed by TiC will grow into regular hexagonal prisms with submicron size. Black-Right-Pointing-Pointer Controlling the transformation from TiC to TiB{sub 2} is an effective method to prepare small and uniform TiB{sub 2} particles.

36 MATERIALS SCIENCE↗

Effect of in-situ (TiC-TiB2) reinforcement on aging and mechanical behavior of AZ91 magnesium matrix composite

Highlights: • Effect of TiC-TiB{sub 2} particles on precipitation behavior of in-situ composite was studied. • The age-hardening rate of in-situ composites is faster than that of alloy. • Faster age hardening rate is due to the presence of high dislocation density in composite. • Post aging treatment improved the mechanical properties of both base and composite. - Abstract: In the present work, influence of in-situ TiC-TiB{sub 2} reinforcement on age hardening behavior and mechanical properties of TiC-TiB{sub 2}/AZ91 composite was investigated. The base and in-situ composite materials were solution treated at 400 °C for 24 h and then aged at different temperatures up to 100 h. The kinetics of age hardening results revealed that the addition of in-situ TiC-TiB{sub 2} reinforcement increase the age hardening kinetics of the composite as compared to AZ91 magnesium alloy. The improvement in age hardening kinetics is attributed to the presence of high dislocation density resulted from the mismatch of coefficients of thermal expansion between in-situ TiC-TiB{sub 2} reinforcement and magnesium matrix. The precipitation behavior of Mg{sub 17}Al{sub 12} phase in both AZ91 alloy and TiC-TiB{sub 2}/AZ91 composites were established. After age hardening, base and in-situ composite materials show significant improvement in ultimate tensile strength by 47.72% and 66.49% respectively as compared with the base monolithic alloy. The enhancement of mechanical properties in the base and in-situ composites is explained in detail by analyzing their fractographs and microstructures.

36 MATERIALS SCIENCE↗

Microstructure evolution during near-net-shape fabrication of Ni x Al y -TiC cermets through binder jet additive manufacturing and pressureless melt infiltration

Titanium carbide-nickel aluminide (TiC-Ni x Al y ) intermetallic matrix composite materials were fabricated with additive manufacturing and pressureless melt infiltration for applications intended for high-wear and corrosive environments while maintaining low density. In this work, two compositions of nickel aluminide are infiltrated into porous, printed TiC preforms. Net shaping of a nickel-rich infiltrant is less compared to the net shaping of the aluminum-rich infiltrant due to dissolution of TiC in the molten infiltrant. The microstructures and porosity of the two infiltrants with TiC are examined after processing. The explanation of shape retention from infiltration is explained, and the excellent shape retention in an Al-rich infiltrant system is thought to be from peritectic behavior and a metered infiltration of different phases during cooling and solidification without significant dissolution. The metered infiltration contributed to some porosity, microcracking, and segregated Ni x Al y phases. We show that TiC can be shaped and infiltrated with intermetallics to provide a method of making composites with limited shrinkage and controlled geometry.

36 MATERIALS SCIENCE↗

Solidification observations and sliding wear behavior of vacuum arc melting processed Ni-Al-TiC composites

Monolithic Ni{sub 3}Al and Ni-25 at.%Al intermetallic matrix TiC-reinforced composites were successfully produced by vacuum arc melting. TiC crystals were formed through a dissolution-reprecipitation mechanism and their final morphology is explained by means of a) Jackson's classical nucleation and growth phenomena and b) solidification rate considerations. The TiC presence altered the matrix microconstituents most likely due to specific melt-particle interactions and crystal plane epitaxial matching. TiC particles caused a significant decrease on the specific wear rate of the monolithic Ni{sub 3}Al alloy and the possible wear mechanisms are approached by means of a) surface oxidation, b) crack/flaws formation, c) material detachment and d) debris-counter surfaces interactions. - Highlights: Black-Right-Pointing-Pointer Vacuum arc melting (VAM) of Ni-Al based intermetallic matrix composite materials. Black-Right-Pointing-Pointer Solidification phenomena examination. Black-Right-Pointing-Pointer TiC crystal formation and growth mechanisms. Black-Right-Pointing-Pointer Sliding wear examination.

36 MATERIALS SCIENCE↗

Assessing the Activity of Ni Clusters Supported on TiC(001) toward CO 2 and H 2 Dissociation

Small Ni particles supported on TiC(001) were shown to display a very high activity for the catalytic hydrogenation of CO 2 but the underlying chemistry is, to a large extent, unknown. Here, by means of periodic density functional theory (DFT) calculations with the BEEF–vdW functional, we explore the adsorption and subsequent dissociation of CO 2 and H 2 on several Ni n clusters ( n = 4, 9, 13, and 16) supported on TiC(001) and compare the results to those obtained for the bare Ni(111) and TiC(001) surfaces using exactly the same computational approach. The calculations reveal that the Ni n /TiC system exhibits stronger adsorption energies and lower dissociation energy barriers for CO 2 and H 2 than the bare Ni(111) and TiC(001) surfaces. Furthermore, this is in line with the experimental finding evidencing that the Ni/TiC system has a catalytic activity higher than that of the separated Ni and TiC constituents. In addition, the calculated results show that two-dimensional (2D) supported clusters adsorb CO 2 and H 2 stronger than the three-dimensional (3D) supported clusters and also the 2D clusters exhibit lower energy barriers for CO 2 dissociation. Within the 2D supported clusters, larger particles feature slightly stronger adsorption energies and lower CO 2 dissociation energy barriers. Finally, H 2 dissociation proceeds with a very low energy barrier on all of the studied models, which makes these novel systems potential good candidates for hydrogenation reactions.

36 MATERIALS SCIENCE↗