Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIN 133”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 133

Evaluated nuclear structure and decay data for all nuclei within the A=133 mass chain are presented. The experimental data are evaluated and best values for level and gamma-ray energies, quantum numbers, lifetimes, gamma-ray intensities, and other nuclear properties are recommended. Inconsistencies and discrepancies that exist in the literature are noted. This work supersedes the earlier evaluation by S. Raab (1995Ra12), published in Nuclear Data Sheets75, 491 (1995).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Studies of nuclei close to {sup 132}Sn using single-neutron transfer reactions

Neutron transfer reactions were performed in inverse kinematics using radioactive ion beams of {sup 132}Sn, {sup 130}Sn, and {sup 134}Te and deuterated polyethylene targets. Preliminary results are presented. The Q-value spectra for {sup 133}Sn, {sup 131}Sn and {sup 135}Te reveal a number of previously unobserved peaks. The angular distributions are compatible with the expected lf{sub 7/2} nature of the ground state of {sup 133}Sn, and 2p{sub 3/2} for the 3.4 MeV state in {sup 131}Sn.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Coulomb Excitation and One-Neutron Transfer Studies of Stable and Radioactive Nuclei at HRIBF-ORNL

Several stable and radioactive nuclei ranging from $A=58$ to 208 were recently studied in inverse kinematics by Coulomb excitation and heavy-ion induced one-neutron transfer at the Holifield Radioactive Ion Beam Facility of Oak Ridge National Laboratory. These studies used a CsI-HPGe detector array to detect scattered charged particles and emitted $\gamma$ rays from the in-beam reactions. A Bragg-curve detector was used to measure the energy loss of the various beams through the targets and to measure the radioactive beam compositions. Stable nickel, strontium, zirconium, molybdenum, tin, tellurium, and lead isotopes and neutron-rich radioactive tin and tellurium isotopes were among the nuclei recently studied. Coulomb excitation was used to measure the electromagnetic moments of the first excited states and heavy-ion induced one-neutron transfer was used to measure the absolute cross sections and lifetimes of the excited single-particle states. A sample of these results are presented here with an emphasis on the tin isotopes. In particular, a survey of the Bragg-curve measurements, Doppler corrections, and inconclusive $i_{13/2}$ candidate in $^{133}$\textrm{Sn} are presented.

Allmond, James M↗

New information on medium-spin structure of {sup 133}Sb

Excited states in the nucleus {sup 133}Sb, populated in the fission of {sup 235}U induced by thermal neutrons were studied using the Lohengrin fission-fragment separator. A new 4191.8 keV level in {sup 133}Sb, populated in the decay of the 16.6 {mu}s isomer, was observed. The level is interpreted as the 11/2{sup +} member of the {pi}g{sub 7/2} x core configuration, predicted by the shell model at 4095 keV. Levels corresponding to octupole excitation of the {sup 132}Sn core, identified previously in prompt-{gamma} measurement, were now observed in the isomeric decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modern status of photonuclear data

The reliability of experimental cross sections obtained for (γ, 1n), (γ, 2n), and (γ, 3n) partial photoneutron reactions using beams of quasimonoenergetic annihilation photons and bremsstrahlung is analyzed by employing data for a large number of medium-heavy and heavy nuclei, including those of {sup 63,65}Cu, {sup 80}Se, {sup 90,91,94}Zr, {sup 115}In, {sup 112−124}Sn, {sup 133}Cs, {sup 138}Ba, {sup 159}Tb, {sup 181}Ta, {sup 186−192}Os, {sup 197}Au, {sup 208}Pb, and {sup 209}Bi. The ratios of the cross sections of definite partial reactions to the cross section of the neutron-yield reaction, F{sub i} = σ(γ, in)/σ(γ, xn), are used as criteria of experimental-data reliability. By definition, positive values of these ratios should not exceed the upper limits of 1.00, 0.50, 0.33,... for i = 1, 2, 3,..., respectively. For many nuclei, unreliable values of the above ratios were found to correlate clearly in various photon-energy regions F{sub i} with physically forbidden negative values of cross sections of partial reactions. On this basis, one can conclude that correspondent experimental data are unreliable. Significant systematic uncertainties of the methods used to determine photoneutron multiplicity are shown to be the main reason for this. New partial-reaction cross sections that satisfy the above data-reliability criteria were evaluated within an experimental–theoretical method [σ{sup eval}(γ, in) = F{sub i}{sup theor} (γ, in) × σ{sup expt}(γ, xn)] by employing the ratios F{sub i}{sup theor} (γ, in) calculated on the basis of a combined photonuclear-reaction model. It was obtained that cross sections evaluated in this way deviate substantially from the results of many experiments performed via neutron-multiplicity sorting, but, at the same time, agree with the results of alternative activation experiments. Prospects of employing methods that would provide, without recourse to photoneutron-multiplicity sorting, reliable data on cross sections of partial photoneutron reactions are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improved Cumulative Fission Yield Measurements with Fission Spectrum Neutrons on 235 U

Two isotopically-characterized targets of high-purity (99.84±0.03%) 235 U-oxide and a neutron dosimetry package were exposed to a pulsed neutron irradiation using the Godiva critical assembly at the National Criticality Experiments Research Center. Following irradiation, the fissioned targets were counted with a broad-energy germanium detector. Estimates of the total fissions for each target were made using measurements of well-known fission products. The total fission values were then used to measure the fission yields of 21 fission products with half-lives between 636 and 119,700 seconds. Mean values of seventeen of the measured fission products fell within the 95% confidence level of the Evaluated Nuclear Data Files VII.1/b (ENDF/B-VII.1) using the larger of the two uncertainties: 84g Br, 89 Rb, 91 Sr, 93 Y, 97 Zr, 101 Mo, 105 Ru, 128 Sn, 129 Sb, 130g Sb, 131 Sb, 131m Te, 133 I, 135 I, 141 Ba, 142 Ba, and 142 La. Seven isotopes were measured to better precision than is listed in the ENDF/B-VII.1 database: 89 Rb, 93 Y, 128 Sn, 129 Sb, 130g Sb, 131m Te, and 133 I. Four of the measured isotopes were found to be statistically different from the ENDF/B-VII.1 database: 94 Y, 134 Te, 134 I, and 138 Xe. Two of the isotopic analyses conducted in this paper fit the parent and daughter data simultaneously. The parent-daughter pairs measured in this way were the 134 Te/I and 142 Ba/La pairs. The fission yield results obtained in this way are unique, especially for 134 I, because the parent and daughter half-lives are so close. Here, given the limited number of direct measurements of the 134 Te/I pair from fast neutron induced fission and the seemingly high estimate for 134 Te from previous work, it is likely that the value in this paper is more accurate; however, additional measurements of this pair are needed to validate this assertion.

42 ENGINEERING↗

Pygmy Dipole Strength and Neutron Skins in Exotic Nuclei

Dipole strength distributions were determined for the neutron-rich nuclei {sup 129-132}Sn and {sup 133,134}Sb from electromagnetic excitation in an experiment using the FRS-LAND setup. For all nuclei, a sizeable fraction of ''pygmy'' dipole strength at excitation energies well below the giant dipole resonance was observed. The integrated low-lying dipole strength of the nuclei with low neutron separation energies can be compared to results for stable nuclei (e.g. N = 82 isotopes) determined for the energy regime of 5-9 MeV. A clear increase of the dipole strength with increasing asymmetry of the nuclei is observed. Comparing the ratio of the low-lying dipole over the giant dipole strength to recent relativistic mean field calculations, values for the parameters a{sub 4} and p{sub 0} of the symmetry energy and for the neutron skin thickness are derived. Averaged over {sup 130}Sn and {sup 132}Sn we extract a-bar{sub 4} = 31.8{+-}1.3 MeV and p-bar{sub 0} = 2.2{+-}0.5 MeV/fm{sup 3}. The neutron skin sizes are determined to R{sub n}-R{sub p} = 0.23{+-}0.03 fm and 0.24{+-}0.03 fm for {sup 130}Sn and {sup 132}Sn, respectively. For {sup 208}Pb a neutron skin thickness of R{sub n}-R{sub p} = 0.18{+-}0.035 fm follows, when applying the same method and using earlier published experimental findings on the dipole strength.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First β-decay spectroscopy of 135 In and new β-decay branches of 134 In

The β decay of the neutron-rich 134 In and 135 In was investigated experimentally in order to provide new insights into the nuclear structure of the tin isotopes with magic proton number Z=50 above the N=82 shell. The β-delayed γ-ray spectroscopy measurement was performed at the ISOLDE facility at CERN, where indium isotopes were selectively laser-ionized and on-line mass separated. Three β-decay branches of 134 In were established, two of which were observed for the first time. Population of neutron-unbound states decaying via γ rays was identified in the two daughter nuclei of 134 In, 134 Sn and 133 Sn, at excitation energies exceeding the neutron separation energy by 1 MeV. The β-delayed one- and two-neutron emission branching ratios of 134 In were determined and compared with theoretical calculations. The β-delayed one-neutron decay was observed to be dominant β-decay branch of 134 In even though the Gamow-Teller resonance is located substantially above the two-neutron separation energy of 134 Sn. Transitions following the β decay of 135 In are reported for the first time, including γ rays tentatively attributed to 135 Sn. In total, six new levels were identified in 134 Sn on the basis of the βγγ coincidences observed in the 134 In and 135 Inβ decays. A transition that might be a candidate for deexciting the missing neutron single-particle 13/2 + state in 133 Sn was observed in both β decays and its assignment is discussed. Experimental level schemes of 134 Sn and 135 Sn are compared with shell-model predictions. Using the fast timing technique, half-lives of the 2 + , 4 + , and 6 + levels in 134 Sn were determined. From the lifetime of the 4 + state measured for the first time, an unexpectedly large B(E2;4 + → 2 + ) transition strength was deduced, which is not reproduced by the shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear symmetry energy and neutron skins derived from pygmy dipole resonances

By exploiting Coulomb dissociation of high-energy radioactive beams of the neutron-rich nuclei {sup 129-132}Sn and {sup 133,134}Sb, their dipole-strength distributions have been measured. A sizable fraction of ''pygmy'' dipole strength, energetically located below the giant dipole resonance, is observed in all of these nuclei. A comparison with available pygmy resonance data in stable nuclei ({sup 208}Pb and N=82 isotones) indicates a trend of strength increasing with the proton-to-neutron asymmetry. On theoretical grounds, employing the RQRPA approach, a one-to-one correlation is found between the pygmy strength and parameters describing the density dependence of the nuclear symmetry energy, and in turn with the thicknesses of the neutron skins. On this basis, by using the experimental pygmy strength, parameters of the nuclear symmetry energy (a{sub 4}=32.0{+-}1.8 MeV and p{sub o}=2.3{+-}0.8 MeV/fm{sup 3}) are deduced as well as neutron-skin thicknesses R{sub n}-R{sub p} of 0.24{+-}0.04 fm for {sup 132}Sn and of 0.18{+-}0.035 fm for {sup 208}Pb, both doubly magic nuclei. Astrophysical implications with regard to neutron stars are briefly addressed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design and testing of a combined neutron and gamma assay system for measuring fissile material in fuel and waste items - 15340

A combined neutron and gamma ray assay system for the measurement of fissile material in both fuel and waste items has been designed, modelled, developed and tested. The purpose of the system is to measure and characterize a wide range of fissile materials including uranium, plutonium, americium and mixed oxide fuel arising from a variety of processes and facilities across the United Kingdom. Dounreay Site Restoration Limited at Dounreay currently stores these items form the United Kingdom Nuclear Decommissioning Authority's un-irradiated fuel inventory. This inventory comprises historic materials from ex-United Kingdom Atomic Energy Authority nuclear fuel projects and experiments together with fast reactor fuel materials and some commercial fuel items as delivered to Dounreay for recovery. The combined assay system has been designed and constructed to support the operation of a fuel processing facility, which will be operated at Dounreay to treat these historic legacy fuel materials, making them suitable for long term storage. Appropriate characterization of the fissile material is required for safety, criticality control and nuclear materials safeguards purposes prior to final disposition. The system consists of both gamma ray and neutron measurement components. The results of a neutron measurement are combined with the gamma ray isotopic ratio measurement results to generate the assay result for the fissile material being characterized. The gamma ray component of the system employs a safeguards quality high purity Germanium detector with electro-mechanical cooling and the measurements of fissile material containers are made in a shielded chamber with a tin and copper graded lining. Containers of fissile material are rotated during the gamma ray measurement and a variable automatic steel collimator aperture mechanism is employed to adjust the measured count rate to control detector dead time. Gamma ray spectra are analysed using the plutonium and uranium isotopic ratio code PC/FRAM. The gamma ray system can also be configured to perform a direct assay of small quantities of uranium bearing material. For this assay measurement a series of cadmium filters can be positioned in front of the detector to reduce the contribution from 59 keV gamma rays from Am-241. In addition to gamma ray isotopic measurements, both active and passive neutron assay is performed by the system. The neutron-measuring component consists of a thick walled cylindrical polyethylene chamber, which provides neutron moderation for 30 one-inch diameter He-3 detector tubes located in re-entrant channels in the polyethylene moderator. Two removable polyethylene-inserts incorporating lower plug assemblies are provided, one with and one without a cadmium lining. Also two top plug units are provided, again one with cadmium and one without a cadmium liner. The Neutron Subsystem can be operated both as a passive and as an active neutron coincidence counter. In both fast and thermal active neutron mode, the neutron component employs two americium-beryllium (Am-Be) alpha-n neutron sources, one positioned in the top and the other in the bottom plug unit. The neutron sources are removed when the counter is operated in passive mode. Passive neutron detection efficiency and active neutron performance has been modelled using the MCNP Monte Carlo computer simulation code as part of the design process. In the absence of fissile samples, operation of the gamma ray component of the system has been tested initially using calibrated Eu-152 and Ba-133 gamma ray sources and the use of archived spectra from fissile material measurements. Initial testing of the neutron system has employed a calibrated Cf-252 spontaneous fission neutron source. Neutron testing has been confirmed using further MCNP simulations. The results of test measurements with the system are presented and compared with the results of MCNP measurement simulations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗