Search NASA⌕ Search

SEARCH · Search NASA

Results for “TM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Measurement of the 169 Tm(n,3n) 167 Tm cross section and the associated branching ratios in the decay of 167 Tm [Measurement of the 169 Tm(n,3n) 167 Tm cross section and the branching ratios in the decay of 167 Tm]

The cross section for the 169 Tm(n,3n) 167 Tm reaction was measured from 17 to 22 MeV using quasimonoenergetic neutrons produced by the 2 H(d,n) 3 He reaction. This energy range was studied to resolve the discrepancy between previous (n,3n) cross-section measurements. In addition, the absolute γ-ray branching ratios following the electron-capture decay of 167 Tm were measured. Furthermore, these results provide more reliable nuclear data for an important diagnostic that is used at the National Ignition Facility to estimate the yield of reaction-in-flight neutrons produced via the inertial-confinement-fusion plasma in deuterium-tritium capsules.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

169 Tm(n,2n) 168 Tm and 169 Tm(n,3n) 167 Tm cross-section measurements from 15 to 21 MeV

The 169 Tm(n,2n) 168 Tm and 169 Tm(n,3n) 167 Tm cross sections have been measured in the neutron energy range between 15 and 21 MeV using the 3 H(d,n) 4 He neutron source reaction. The 169 Tm(n,3n) 167 Tm data are intended to provide an accurate database for interpreting so-called reaction-in-flight neutron yields, which provide a sensitive tool for studying properties of the deuterium-tritium plasma created in inertial confinement fusion laser shots at the National Ignition Facility at Lawrence Livermore National Laboratory. The data are compared to previous data and evaluations for the reaction studied and are found to be in good agreement with the ENDF/B-VIII.0 evaluation, although small adjustments are necessary for the 169 Tm(n,3n) 167 Tm reaction. Here, for the first time in any (n,2n) cross-section measurements to date, a comprehensive data set ranging from threshold to 21 MeV has been obtained by the same group.

150 ≤ A ≤ 189↗

Promising Graphene-Like Half-Metallic Nanosheets TM-InSe (TM = Mn, Fe, and Co) Induced by TM Adsorption

Several half-metallic graphene-like nanosheets, namely transition metal (TM)-adsorbed monolayers (TM-InSe, TM = Mn, Fe, and Co), are predicted by the first-principles calculations. Their structural, electric, and magnetic properties are studied in detail. The adsorption energies of these nanosheets are negative so that they have stable adsorption structures, indicating that it is possible to prepare them in experiments. The pristine InSe nanosheet is a typical semiconductor, but TM-InSe nanosheets are conductive. They are possible half-metallic 2D materials. Calculated total magnetic moments of TM-InSe nanosheets are about 5.18, 3.93, and 1.28 μ{sub B} for TM = Mn, Fe, and Co, respectively. Their conductibility, half-metallicity, and magnetic moments come mainly from adsorbed TM ions, partially from In and Se ions. For Mn-InSe and Fe-InSe nanosheets, TM-3d4s and Se-4p{sub z} electrons enter into the molecular orbitals in high-spin sequence, but for the Co-InSe nanosheet, electrons enter into the molecular orbitals in lowspin sequence. Electronic structures of the Mn-InSe, Fe-InSe and Co-InSe nanosheets are σ{sup 1} ↑ σ{sup 1} ↓ d{sup 5} ↑ d{sup 1} ↓ σ*{sup 1} ↑, σ{sup 1} ↑ σ{sup 1} ↓ d{sup 5} ↑ d{sup 2} ↓ σ*{sup 1} ↑, and σ{sup 1} ↑ σ{sup 1} ↓ d{sup 5} ↑ d{sup 4} ↓, respectively. The total moments 5.00, 4.00, and 1.00 μ{sub B} of TM-InSe nanosheets based on these electronic structures are basically in accordance with calculated values, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Kinematics at the intersection of the Garlock and Death Valley fault zones, California: Integration of TM data and field studies. LANDSAT TM investigation proposal TM-019

Processing and interpretation of Thematic Mapper (TM) data, extensive field work, and processing of SPOT data were continued. Results of these analyses led to the testing and rejecting of several of the geologic/tectonic hypotheses concerning the continuation of the Garlock Fault Zone (GFZ). It was determined that the Death Valley Fault Zone (DVFZ) is the major through-going feature, extending at least 60 km SW of the Avawatz Mountains. Two 5 km wide fault zones were identified and characterized in the Soda and Bristol Mountains, forming a continuous zone of NW trending faulting. Geophysical measurements indicate a buried connection between the Avawatz and the Soda Mountains Fault Zone. Future work will involve continued field work and mapping at key locations, further analyses of TM data, and conclusion of the project.

Abrams, Michael↗

Investigation of loss processes of Tm and Tm,Ho in YAG

The loss of excitation from various manifolds of Tm and Tm,Ho in YAG as a function of temperature and concentration is studied. Two probable loss mechanisms - a Tm up-conversion and a Ho up-conversion - are identified. A 785-nm CW diode laser with 400-nW peak power was focused to a small spot on the sample. The emission from the sample observed at 90 deg was monitored through a monochromator with slits open to 3 mm. Intensity of emission was measured by varying the power of the excitation source using a set of neutral density filters. Power is reported as the percentage of the peak power, and the intensity curves were normalized below 20 percent of transmission. The fact that there is emission above the pump energy indicates an up-conversion from excited manifolds. Nonlinear changes in the intensity of the emission from the Tm 3F4 manifold with the pump power reveals a loss of excitation from this manifold. The linear dependence of the 5I7 manifold emission with pump power at low Tm and high Ho concentrations and the gain of energy in the 5I6 manifold of Ho indicate that the 5I7 manifold loss is due to the coupling of Tm and Ho ions.

Armagan, G.↗

Tunable magnetic order in low-symmetry SeO 3 ligand linked TM 3 (SeO 3 ) 3 H 2 O ( TM =Mn , Co, and Ni) compounds

The ability to design crystal lattices with specific sublattice geometries has long been sought after especially in the context of harnessing magnetic frustration to elicit emergent physics. One approach which has seen some success recently is to design magnetic sublattices chemically through the use of nonmagnetic linker ligands as scaffolding for the magnetic ions. In this work we report the magnetic properties of one such family of materials, the transition metal (TM) selenite hydrates with chemical formula TM 3 (SeO 3 ) 3 H 2 O. These materials link highly distorted TMO 6 octahedra via nonmagnetic [SeO 3 ] 2+ linkers. Studying members with TM = Mn, Co, and Ni we use magnetic susceptibility and neutron powder diffraction to identify antiferromagnetic order in all three compounds with moderate frustration indexes. A comparison of the magnetic structures suggests that while the overall structure of the SeO 3 scaffolding remains unchanged the TM effects changes in the magnetic properties through tuning the internal bonding parameters and the single-ion physics. Changing from Mn to Co is found to be particularly consequential manifesting changes in both the ordered-moment direction and in the direction of the ordering vector. Field-dependent measurements of the susceptibility and heat capacity reveal metamagnetic transitions in both Mn 3 (SeO 3 ) 3 H 2 O and Co 3 (SeO 3 ) 3 H 2 O indicating nearby magnetic ground states accessible under relatively small applied fields. Density functional theory calculations broadly confirm these results, showing both a sensitivity of the magnetic structure to the TM and its local environment. Although no spin liquid behavior is achieved, these results suggest the fruitfulness of such synthesis philosophies and encourage future work to engender higher frustration in these materials via doping, field, pressure, or larger linker ligands.

36 MATERIALS SCIENCE↗

Modeling Cr-to-Tm and Cr-to-Tm-to-Ho energy transfer in YAG crystals

A systematic analysis of energy transfer processes in crystals of YAG doped with varying concentrations of Cr and Tm is described. Both spectral measurements and measurements of the temporal response to pulsed excitation are used to give independent determinations of the microscopic interaction parameter for Cr to Tm transfer. The different factors in influencing the temperature dependence of the Cr to Tm transfer are discussed. The dependence of the Tm cross-relaxation rate on Tm concentration is determined.

Swetits, John J.↗

Magnetic properties of Co{sub 2−x}TM{sub x}C and Co{sub 3−x}TM{sub x}C nanoparticles

Using synthetic chemical approaches, it is now possible to synthesize transition metal carbides nanoparticles with morphology, where the transition metal layers are embedded with intervening layers of carbon atoms. A composite material consisting of Co{sub 2}C and Co{sub 3}C nanoparticles has been found to exhibit unusually large coercivity and energy product. Here, we demonstrate that the magnetic moments and the anisotropy can be further enhanced by using a combination of Co and other transition metals (TM). Our studies are based on mixed nanoparticles Co{sub 2−x}TM{sub x}C and Co{sub 3−x}TM{sub x}C, in which selected Co sites are replaced with 3d transition elements Cr, Mn, and Fe. The studies indicate that the replacement of Co by Fe results in an increase of both the magnetic moment and the magnetic anisotropy. In particular, CoFe{sub 2}C is shown to have an average spin moment of 2.56 μ{sub B} and a magnetic anisotropy of 0.353 meV/formula unit compared to 1.67 μ{sub B} and 0.206 meV/formula unit for the Co{sub 3}C. Detailed examination of the electronic structure shows that the limited hybridization of carbon p-states with transition metal d-states drives the larger anisotropy.

36 MATERIALS SCIENCE↗

Systematic study of electronic and magnetic properties for Cu{sub 12–x}TM{sub x}Sb{sub 4}S{sub 13} (TM = Mn, Fe, Co, Ni, and Zn) tetrahedrite

Substitution effects of 3d transition metal (TM) impurities on electronic and magnetic properties for Cu{sub 12}Sb{sub 4}S{sub 13} tetrahedrite are investigated by the combination of low-temperature experiments and first-principles electronic-structure calculations. The electrical resistivity for the cubic phase of Cu{sub 12}Sb{sub 4}S{sub 13} exhibits metallic behavior due to an electron-deficient character of the compound. Whereas that for 0.5 ≤ x ≤ 2.0 of Cu{sub 12−x}Ni{sub x}Sb{sub 4}S{sub 13} exhibits semiconducting behavior. The substituted Ni for Cu is in the divalent ionic state with a spin magnetic moment and creates impurity bands just above the Fermi level at the top of the valence band. Therefore, the semiconducting behavior of the electrical resistivity is attributed to the thermal excitation of electrons from the valence band to the impurity band. The substitution effect of TM on the electronic structure and the valency of TM for Cu{sub 11.0}TM{sub 1.0}Sb{sub 4}S{sub 13} are systematically studied by the calculation. The substituted Mn, Fe, and Co for Cu are found to be in the ionic states with the spin magnetic moments due to the large exchange splitting of the 3d bands between the minority- and majority-spin states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of three-quasiparticle isomers in {sup 169}Ho and {sup 171}Tm.

A three-quasiparticle isomer with {tau}=170(8) {micro}s and K{sup {pi}} = (19/2{sup +}) has been identified in the neutron-rich isotope {sup 169}Ho. The isomer decays with K-forbidden transitions to members of a band associated with the 7/2-[523] proton configuration, whose structure is characterized through analysis of the in-band {gamma}-ray branching ratios. In the isotone {sup 171}Tm, the rotational band based on the known 19/2{sup +}, three-quasiparticle isomer has also been observed. Alternative one-proton two-neutron configurations for the isomer in {sup 169}Ho are discussed in terms of multiquasiparticle calculations and through a comparison with the structures observed in {sup 171}Tm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the Tm 169 ( n , 2 n ) Tm 168 cross section from threshold to 15 MeV

Measurements of the 169 Tm(n,2n) 168 Tm cross section have been performed via the activation technique at 13 energies between 8.5 and 15.0 MeV. The purpose of this comprehensive data set is to provide an alternative diagnostic tool for obtaining subtle information on the neutron energy distribution produced in inertial confinement deuterium-tritium fusion experiments at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. In conclusion, the 169 Tm(n,2n) 168 Tm reaction not only provides the primary 14-MeV neutron fluence, but also the important down-scattered neutron fluence, the latter providing information on the density achieved in the deuterium-tritium plasma during a laser shot.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Enhanced thermoelectric performance of heavy-fermion compounds Yb TM 2 Zn 20 ( TM = Co, Rh, Ir) at low temperatures

Thermoelectricity allows direct conversion between heat and electricity, providing alternatives for green energy technologies. Despite these advantages, for most materials the energy conversion efficiency is limited by the tendency for the electrical and thermal conductivity to be proportional to each other and the Seebeck coefficient to be small. Here we report counter examples, where the heavy fermion compounds Yb TM 2 Zn 20 ( TM = Co, Rh, Ir) exhibit enhanced thermoelectric performance including a large power factor ( PF = 74 μW/cm-K 2 ; TM = Ir) and a high figure of merit ( ZT = 0.07; TM = Ir) at 35 K. The combination of the strongly hybridized electronic state originating from the Yb f -electrons and the novel structural features (large unit cell and possible soft phonon modes) leads to high power factors and small thermal conductivity values. This demonstrates that with further optimization these systems could provide a platform for the next generation of low temperature thermoelectric materials.

36 MATERIALS SCIENCE↗

Results of a Telephone Survey of Television Station Managers Concerning the NASA SCI Files(TM) and NASA CONNECT(TM)

A telephone survey of television station managers concerning 2 instructional television programs, the NASA SCI Files(TM) and NASA CONNECT(TM), offered by the NASA Langley Center for Distance Learning (CDL) was conducted. Using a 4-point scale, with 4 being very satisfied, survey participants reported that they were either very satisfied (77.1 percent) or satisfied (19.9 percent) with the overall (educational and technical) quality of the NASA SCI Files(TM). Using a 4-point scale, with 4 being very satisfied, survey participants reported that they were either very satisfied (77.9 percent) or satisfied (19.1 percent) with the overall (educational and technical) quality of NASA CONNECT(TM) .

Pinelli, Thomas E.↗

Formation enthalpies of LaLn'O{sub 3} (Ln'=Ho, Er, Tm and Yb) interlanthanide perovskites

High-temperature oxide melt solution calorimetry using 3Na{sub 2}O·MoO{sub 3} at 802 °C was performed for interlanthanide perovskites LaLn'O{sub 3} (Ln'=Ho, Er, Tm and Yb) and lanthanide oxides (La{sub 2}O{sub 3}, Ho{sub 2}O{sub 3}, Er{sub 2}O{sub 3}, Tm{sub 2}O{sub 3} and Yb{sub 2}O{sub 3}). The enthalpies of formation of these interlanthanide perovskites from binary lanthanide oxides at room temperature (25 °C) were determined to be −8.3±3.4 kJ/mol for LaHoO{sub 3}, −9.9±3.0 kJ/mol for LaErO{sub 3}, −10.8±2.7 kJ/mol for LaTmO{sub 3} and −12.3±2.9 kJ/mol for LaYbO{sub 3}. There is a roughly linear relationships between these enthalpy values and the tolerance factor for these and for other LaM{sup 3+}O{sub 3} (M=In, Sc, Ga, Al, Fe and Cr) perovskites, confirming that the distortion of the perovskites as results from ionic radius difference of A-site and B-site cations, is the main factor determining the stability of these compounds. - Graphical abstract: A linear relationship between the enthalpy of formation and the tolerance factor for interlanthanide LaLn'O{sub 3} (Ln'=Ho, Er, Tm, and Yb) and other LaM{sup 3+}O{sub 3} (M=In, Sc, Ga, Al, Fe and Cr) perovskites. - Highlights: • Interlanthanide perovskites were synthesized by solid state reactions. • Their enthalpies of formation were measured by oxide melt solution calorimetry. • ΔH{sub f,ox} shows a linear relationship with tolerance factor.

36 MATERIALS SCIENCE↗

Measuring aerosol collection efficiency for the Bladewerx “New Speclon TM 5” and the older “Speclon TM 5” filter

Bladewerx TM LLC (Rio Rancho, NM) manufactures instrumentation, neutron shielding and activation foils for the radiation protection industry. Specializing in portable alpha/beta air monitors and sample counters, Bladewerx is the source of Speclon TM PTFE filter media that they recommend for high-resolution alpha spectroscopy. Los Alamos National Laboratory (LANL) utilizes Speclon TM filter material in CAM (Continuous Air Monitor) samplers for workplace air monitoring. The LANL Aerosol Engineering Facility received air filter material from Bladewerx, referred to as “New Speclon 5” in this document, in order to distinguish from filter material that was previously received (referred to as “Speclon 5” in this document). In this document, the aerosol collection efficiency and airflow resistance (pressure drop) were measured for the New Speclon 5 filter material.

61 RADIATION PROTECTION AND DOSIMETRY↗

The Significance of the 'Insignificant': Non-covalent Interactions in CO 2 Reduction Reactions with 3C-TM (TM=Sc-Zn) Single-Atom Catalysts

With energy shortages and excessive CO 2 emissions driving climate change, converting CO 2 into high-value-added products offers a promising solution for carbon recycling. We investigate CO 2 reduction reactions (CO2RR) catalyzed by 10 single-atom catalysts (SACs), incorporating weak non-covalent interactions, specifically lone pair-π and H-π interactions. The SACs, consisting of transition metals coordinated by three carbon atoms in a defective graphene substrate (3C-TM, TM=Sc-Zn), leverage these interactions to influence the energy fluctuations of intermediates and the limiting potentials of CO 2 RR, without altering the overall reaction pathway. Further, our findings show that SACs based on early transition metals (Sc, Ti, V, Cr) can serve as catalysts for C 1 products, including HCOOH, HCHO, CH 3 OH, and CH 4 , while those based on Fe and Co are suitable for CO formation. Driving force analysis helps bridge theoretical results with experimental observations and propose a modified approach for assessing hydrogen evolution reactions (HER) competition. SACs based on Ni and Cu exhibit moderate HER tolerance, while early transition metals excel in selective CO 2 reduction. We also identify a linear scaling relationship between the free energies of *COOH and *CO. This study offers valuable insights for future experimental studies and large-scale computational screenings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗