Search NASA⌕ Search

SEARCH · Search NASA

Results for “TUMBLER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

A study in three-dimensional chaotic dynamics: Granular flow and transport in a bi-axial spherical tumbler

We study three-dimensional (3D) chaotic dynamics through an analysis of transport in a granular flow in a half-full spherical tumbler rotated sequentially about two orthogonal axes (a bi-axial “blinking” tumbler). The flow is essentially quasi-two-dimensional in any vertical slice of the sphere during rotation about a single axis, and we provide an explicit exact solution to the model in this case. Hence, the cross-sectional flow can be represented by a twist map, allowing us to express the 3D flow as a linked twist map (LTM). We prove that if the rates of rotation about each axis are equal, then (in the absence of stochasticity) particle trajectories are restricted to two-dimensional (2D) surfaces consisting of a portion of a hemispherical shell closed by a “cap''; if the rotation rates are unequal, then particles can leave the surface they start on and traverse a volume of the tumbler. The period-one structures of the governing LTM are examined in detail: analytical expressions are provided for the location of period-one curves, their extent into the bulk of the granular material, and their dependence on the protocol parameters (rates and durations of rotations). Exploiting the restriction of trajectories to 2D surfaces in the case of equal rotation rates about the axes, a method is proposed for identifying and constructing 3D Kolmogorov--Arnold--Moser (KAM) tubes around the normally elliptic period-one curves. The invariant manifold structure arising from the normally hyperbolic period-one curves is also examined. When the motion is restricted to 2D surfaces, the structure of manifolds of the hyperbolic points in the bulk differs from that corresponding to hyperbolic points in the flowing layer. Each is reminiscent of a template provided by a non-integrable perturbation to a Hamiltonian system, though the governing LTM is not. This highlights the novel 3D chaotic behaviors observed in this model dynamical system.

42 ENGINEERING↗
DOE OSTI2022

Operation Tumbler-Snapper

Operation Tumbler-Snapper began on April 1, 1952, when Able, a low-yield nuclear device, detonated 793 feet over the Frenchman Flat area of the Nevada Proving Ground. Able, the first of four airdrops conducted as the Tumbler phase of the Operation, provided the Department of Defense with reliable data on the relationship between height of burst and blast overpressure. Such information was vital to establishing the battlefield use of nuclear weapons. A final set of four tower detonations, the Snapper phase, provided the AEC and Los Alamos with diagnostic data on new weapon designs. Although the test series was nominally divided between the AEC and the DOD, this distinction held little meaning because two of the Tumbler effects tests, Charlie and Dog, employed experimental devices and all four of the Snapper tests involved effects experiments, including military troop maneuvers.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

Frustrated Coulombic and Cation Size Effects on Nanoscale Boehmite Aggregation: A Tumbler Small- and Ultra-Small-Angle Neutron Scattering Study

To better understand the effects of solution chemistry on particle aggregation in the complex legacy tank wastes at the Hanford (WA) and Savannah River (SC) sites, we have performed a series of tumbler small- and ultra-small-angle neutron scattering experiments on 20 wt % solid slurries of nanoparticulate aluminum oxyhydroxide (boehmite) with M 1+ nitrates of various concentrations and radii. In this study, the solutes consisted of H, Li, Na, K, and Rb nitrates at 10 –5 , 10 –3 , 10 –1 , 2, and 4 molal (m) concentrations, as well as in pure H 2 O. Synthetic boehmite nanoparticles were used with a size range from ~20 to 30 nm. Tumbler cells were used to keep the solids from settling. Although particles initially form individual rhombohedral platelets, once placed in solution, they quickly form well-bonded stacks, primary aggregates, up to ~1500 Å long, and a second level of aggregates whose concentration and structure vary as a function of cation type and concentration. Aggregation generally increases with increased solute concentration and with cation radius up to a concentration somewhat above 10 –1 m, at which point the trend reverses. Primary aggregates become more rodlike and larger. The Kirkwood-like reversal probably reflects a change from Derjaguin–Landau–Verwey–Overbeek (DLVO)/Debye behavior controlled by surface chemistry to a frustrated Coulombic system controlled by the solution structure. These data suggest that an understanding of the effects of salt concentration and chemistry on nanoparticle aggregate structures provides useful physical insights into the microscopic origin of slurry rheology in the Hanford and Savannah River legacy wastes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRSDate not supplied

Validation Testing and Statistical Analysis of the Rotary Tumbler Fabric Abrasion Method

The Artemis space suit glove environmental protection garment (EPG) will be the first line of protection used to shield the crewmember’s hands from the environments encountered during extravehicular activity (EVA). As the Artemis missions will include more extreme environments than those experienced on the International Space Station, development, verification, and validation of gloves requires the development of new test methods. A previous paper focused on the development of a test procedure to characterize lunar EVA glove fabrics using ASTM standardized test methods and the design and validation of a new standardized test procedure for comparing abrasion resistance between fabrics using a dust and rock filled rotary tumbler. Preliminary results of testing were presented in that paper. This paper reports on the validation testing and statistical analysis of the newly developed tumbler abrasion test method.

Robert J Jones↗
DOE OSTI2018

Effects of Ionic Strength, Salt, and pH on Aggregation of Boehmite Nanocrystals: Tumbler Small-Angle Neutron and X-ray Scattering and Imaging Analysis

The U.S. government currently spends significant resources annually managing the legacies of the Cold War, including 300 million liters of highly radioactive wastes stored in hundreds of tanks at the Hanford Site (WA) and the Savannah River Site (SC). The materials in these tanks consist of highly radioactive slurries and sludges at very high pH and salt concentrations. The solid particles primarily consist of aluminum hydroxides and oxyhydroxides (gibbsite and boehmite), although many other materials are present. These form complex aggregates that dramatically affect the rheology of the solutions and, therefore, efforts to recover and treat these wastes. In this paper we have used a combination of transmission and cryo-transmission electron microscopy, dynamic light scattering, and X-ray and neutron small- and ultra-small angle scattering to study the aggregation in controlled environments of synthetic nano-boehmite particles at pH 9 (approximately the point of zero charge) and 12, and sodium-nitrate and calcium-nitrate concentrations up to 1 molal. While the initial particles form individual rhombohedral platelets, once placed in solution they quickly form well-bonded stacks, primary aggregates, up to ~ 150 nm long. These are more prevalent at pH=12. Addition of calcium-nitrate or sodium-nitrate has a similar effect as lowering pH, but approximately one hundred times less calcium than sodium is needed to observe this effect. These aggregates have fractal dimension between 2.5 and 2.6 that are relatively unaffected by salt concentration for calcium-nitrate at high pH. Larger aggregates (> ~ 400 nm) are also formed, but their size distributions are discrete rather than continuous. The fractal dimensions of these aggregates are strongly pH dependent but only become dependent on solute at high salt concentrations.

36 MATERIALS SCIENCE↗
DOE OSTI2017

CONV-3D Code Application for CFD-Modeling of Lead-Bismuth Coolant

The results of testing the three-dimensional CFD-code on problems very close to real processes for lead–bismuth eutectic are presented: flow in a 19-fuel element assembly with three spacing lattices and convection in the ‘tumbler’ model. The results of convergence on a sequence of grids permit drawing the conclusion that for a 19-fuel element assembly the error in the calculation of the friction coefficient on a more finely divided grid does not exceed 10% with two-fold smaller grid step in each direction. Similar arguments are valid for the calculation of the hydraulic resistance coefficient.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Effects of γ-Irradiation, Cation Size, and Salt Concentration on the Aggregation of Boehmite Nanoplatelets

The effects of radiation on the aggregation of nanoplatelets of aluminum oxyhydroxide (boehmite) in slurries of M 1+ cation nitrates has been observed using tumbler small- and ultra-small-angle neutron scattering. Nitrate solutions of H, Li, Na, K, and Rb at concentrations of 10 -5 , 10 -3 , 10 -1 , 2, and 4 molal were compared to the results for pure H 2 O. Primary aggregates consisting of small stacks of boehmite platelets that form immediately after the boehmite is placed in water are smaller for irradiated boehmite than the pristine material. Here, the primary aggregates for irradiated boehmite also appear to have a rougher surface than those observed for unirradiated materials. Both results are possibly due to breaking of the surface OH species and a neutralization of the surface. At low salt concentrations, the pH of the irradiated boehmite slurries is lower than that of the corresponding pristine material indicating that irradiated boehmite adsorbs fewer protons or more hydroxide onto its surface than the pristine boehmite. Increasing the salt concentration decreases the pH to near neutral at 7 due to screening of the electric double layer at the solid/liquid interface. Irradiation does not seem to affect the size of secondary aggregates formed from the aggregation of primary aggregates or of the overall size of the primary aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

MFIX DEM Enhancement for Industry-Relevant Flows (Final Report)

The overall goal of this two-phase project is to implement performance improvements of the Multiphase Flow with Interphase Exchanges (MFIX) Discrete Element Model (DEM) code that enable a transformative shift for industrial use. Prior to this effort, the largest simulations performed using MFIX are O(10 7 ) particles. This falls short of the O(10 9 ) particle simulations that must be completed on a timescale of days or weeks (vs. months or years) to enable simulations with physically-relevant domain sizes to be incorporated into industrial design cycles within five years. This was accomplished by tailoring best-in-class practices to bear on the unique challenges posed by the MFIX-DEM algorithm and code base. Scientific simulations (e.g., in cosmology, turbulent combustion) routinely use massively parallel computing to update far more particles in short wall clock times. Results from Phase 1 (1.5 years in duration) indicated significant gains in speed were possible for a wide range of benchmark cases. Moreover, a survey sent to >35 companies indicates that the timing is ideal for such an enhanced tool, with >80% of the respondents indicating that DEM is already value-added or will be within the next 5 years, and >70% of the respondents indicating that improved speed is the top computational priority. In Phase 2 (3.5 years in duration), the two major barriers that hinder industry from effectively using multiphase Computational Fluid Dynamics (CFD) to cut costs and improve performance, namely computational overhead and confidence in predictions, continued to be addressed. Regarding the former, the results from Phase 1 to guide the effort, with enhancements focused on an improved time-stepping algorithm and particle sorting. Four target problems of 1 billion particles each and increasing complexity were identified: homogeneous cooling, tumbler with continuous particle size distribution, discharge from a rectangular hopper and a cylindrical riser. Each of these were successfully simulated for relevant time scales (on order of seconds) using less than 24 hours of wall clock time. These represent the first 1-billion particle DEM simulations performed with MFIX, namely using the MFIX-Exa code. This code is currently under development at NETL in collaboration with Lawrence Berkeley National Laboratory. Regarding the second barrier on predictive uncertainty, experiments from Phase 1 (interacting nozzles - hydrodynamics only) and Phase 2 (very small-scale segregation experiments) were used to demonstrate the ability of two simplified approaches to uncertainty quantification (UQ). By limiting the number of particles, UQ based on the simplified treatment was compared to standard UQ, which was shown to have much higher computational demands. Experiments were also performed on a pilot-scale stripper unit to provide validation data for future CFD-DEM simulations and UQ.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Centrifugal Barrel Polishing of a 650 MHz Single-Cell Nb Cavity

This work reports the first application of centrifugal barrel polishing (CBP) to a 650 MHz single-cell niobium superconducting radio frequency cavity. The CBP was performed using a newly installed large tumbler designed to accommodate four large-sized 650 MHz multi-cell cavities. The CBP process was applied to smooth the internal surface of the cavity prior to electropolishing. This study describes the CBP procedure and presents surface results following the CBP process.

Chouhan, Vijay [Fermilab]↗
DOE OSTI2025

Ocean-Powered Oyster Tumbling: A Review of Techniques and Opportunities for Emission Reductions

Oysters perform critical roles in shoreline ecosystems by improving water quality, providing habitat for species, and preventing erosion. These ecosystem functions are present even when oysters are farmed. Because of this, and the lack of need for nutrient inputs, oyster farming is often viewed as environmentally friendly. However, fossil fuels play a large part in oyster farming practices. Fossil fuels are used to power boats, tools, and farming equipment. Oyster tumbling machines, which are used to control biofouling and produce a desirable shape and size, use a significant amount of energy and are often powered by diesel generators. As the oyster farming industry grows and practices such as integrated multi-trophic aquaculture expand, decarbonization of the industry becomes more important. One solution may be “ocean-powered” tumbling, whereby oyster grow-out gear is designed to use a range of ocean movements to tumble oysters gradually as they grow. This solution eliminates the need for fossil fuel-powered tumblers and tends to be less labor intensive. A wide range of ocean-powered gear is used by farms across the United States. New approaches and designs are being explored, making ocean-powered oyster tumbling accessible in different environments. Water movements at oyster farms are primarily driven by tidal exchange, currents, wind waves, or a combination. This paper compares methods of ocean-powered tumbling, explores the transition from standard fossil fuel-powered tumbling techniques to ocean-powered tumbling, and estimates the emission reductions of decarbonizing oyster tumbling practices.

16 TIDAL AND WAVE POWER↗
NASA NTRS1966

Key-locked guard prevents accidental switch actuation

Switch guard, which locks in place on a panel, protects individual switches from accidental activation. The guard consists of a cup to cover the switch lever, a standard screw lock tumbler, and a stud that mates with a threaded adapter in the panel.

Hawthorne, K. C.↗