SEARCH · Search NASA

Results for “TUMBLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Effect of geometry, static stability, and mass distribution on the tumbling characteristics of generic flying-wing models

Results from an investigation to determine the low-speed tumbling characteristics of twelve generic flying-wing models are summarized. There is a concern that airplanes with flying-wing planforms could inadvertently enter an out-of-control tumbling motion under certain conditions. The objectives of this investigation were to: 1) identify the geometric and mass-related parameters that cause flying wings to be capable of sustained tumbling, 2) analyze some of the driving mechanisms that cause tumbling, and 3) determine the feasibility of using computer simulations to predict the tumbling characteristics of flying wings. Free-tumble and free-to-pitch tests were conducted with dynamically-scaled, generic flying wing models. The use of computer simulations as a predictive tool for tumbling was explored. Results indicated that center-of-gravity location, mass distribution, and geometric aspect ratio strongly affected the tumbling characteristics of the models tested and that positive static stability did not necessarily preclude tumbling. The magnitude of dynamic effects were found to be of the same order as static effects for the models undergoing autorotation-in-pitch. The simulations indicated that the dynamic terms in the equations of motion used to predict tumbling must be obtained using experimental methods that account for the large amplitude/high pitch-rate environment that characterizes tumbling.

Fremaux, C. M.↗

NASA NTRS1948

Longitudinal Trim and Tumble Characteristics of a 0.057-Scale Model of the Chance Vought XF7U-1 Airplane, TED NO. NACA DE311

Based on results of longitudinal trim and tumble tests of a 0.057-scale model of the Chance Vought XF7U-1 airplane, the following conclusions regarding the trim and tumble characteristics of the airplane have been drawn: 1. The airplane will not trim at any unusual or uncontrolled angles of attack. 2. The airplane will not tumble with the center of gravity located forward of 24 percent of the mean aerodynamic chord. When the center of gravity is located at 24 percent of the mean aerodynamic chord and slats are extended and elevators are deflected full up, the airplane may tumble if given an external positive pitching moment. 3. The tumbling motion obtained will be readily terminated by deflecting the elevators full down so as to oppose the rotation. 4. The accelerations encountered during an established tumble may be dangerous to the pilot and, therefore, action should be taken to terminate a tumble immediately upon its inception. 5. Simultaneous opening of two wing-tip parachutes having diameters of 4 feet or larger and having drag coefficients of approximately 0.7 will effectively terminate the tumble. 6. Model results indicate that the pilot will not be struck by the airplane if it becomes necessary to leave the airplane during a tumble. The pilot may require aid from an ejection-seat arrangement.

Bryant, Robert L.↗

NASA NTRS1947

Investigations of Tumbling Characteristics of a 1/20-Scale Model of the Northrop N-9M Airplane

The tumbling characteristics of a 1/20-scale model of the Northrop N-9M airplane have been determined in the Langley 20-foot free-spinning tunnel for various configurations and loading conditions of the model. The investigation included tests to determine whether recovery from a tumble could be effected by the use of parachutes. An estimation of the forces due to acceleration acting on the pilot during a tumble was made. The tests were performed at an equivalent test altitude of 15,000 feet. The results of the model tests indicate that if the airplane is stalled with its nose up and near the vertical, or if an appreciable amount of pitching rotation is imparted to the airplane as through the action of a strong gust, the airplane will either tumble or oscillate in pitch through a range of angles of the order of +/-120 deg. The normal flying controls will probably be ineffective in preventing or in terminating the tumbling motion. The results of the model tests indicate that deflection of the landing flaps full down immediately upon the initiation of pitching rotation will tend to prevent the development of a state of tumbling equilibrium. The simultaneous opening of two-7-foot diameter parachutes having drag coefficients of 0.7, one parachute attached to the rear portion of each wing tip with a towline between 10 and 30 feet long, will provide recovery from a tumble. The accelerations acting on the pilot during a tumble will be dangerous.

MacDougall, George F., Jr.↗

NASA NTRSDate not supplied

Interpretation of Vehicle Tumbling Predictions from 6-DOF Entry and Descent Simulation

Blunt body entry vehicles are subject to dynamic instability during terminal descent. This often manifests as limit cycle oscillations in total angle of attack, but can diverge into tumbling behavior under certain conditions. For the Mars Sample Return Earth Entry Vehicle (MSR EEV), there is a constraint on the orientation of the sample tubes so backward impact is impermissible. Past missions have chosen to deploy parachutes to preclude tumbling, but active events after release of MSR EEV have been ground-ruled out with the intent to maximize system reliability. Prevention of tumbling during subsonic descent is a design driver for MSR EEV. During preliminary design of the MSR EEV, six degree-of-freedom numerical simulations indicated an unacceptably high probability of tumbling for a 60degree sphere-cone forebody geometry, which necessitated a design change. Decreasing the forebody angle was expected to improve dynamic stability, but would also adversely impact mass, aeroheating, and manufacturing risk. Hence there was strong motivation to understand the physical drivers for the onset of tumbling, and to determine: (a) whether the causes of tumbling are representative of physically realizable vehicle entry configurations and (b) what changes can be made to existing design and analysis practices to ensure a stable vehicle.

Entry Vehicle↗

NASA NTRS1991

TALON and CRADLE: Systems for the rescue of tumbling spacecraft and astronauts

Advanced pressure suit and tool designs are beginning to allow extravehicular astronauts to repair space vehicles and so increase mission life and system reliability. A common spacecraft failure that is a severe challenge to the rescue mission planner is loss of attitude control resulting in tumbling motion. If an extravehicular astronaut flying the Manned Maneuvering Unit (MMU) 'falls' into a tumble, the result could be loss of life. TALON (Tumble Arresting Large Oscillation Nullifier) is a device capable of capturing a target in an uncontrolled three-axis tumble. CRADLE (Concentric Rotating Astronaut Detumble Lifesaving Equipment) is a similar device sized to rescue a suited astronaut. The two rescue vehicles work on the same basic principle. They are structural shells with articulated limbs which can surround a tumbling target and thus align both the chaser and target centers of mass (CM).

Idle, Dunning, V↗

NASA NTRS1972

Safety in earth orbit study. Volume 3: Analysis of tumbling spacecraft, escape and rescue

Detailed and supporting analyses of the hazards of a disabled spacecraft in a tumbling mode and of crew escape, rescue, and survivability are presented for earth orbital operations of the space shuttle program. Tumbling conditions, arresting tumbling by external means, and escape from a tumbling vehicle are discussed. Details on design concepts for the modular space station, integral tank orbiter, drop tank orbiter, and a small space vehicle are included. Results of the crew safety study indicate that the shuttle orbiter should be the primary vehicle for dealing with emergencies and one vehicle should be available for rapid emergency rescue. An Apollo command module should be carried in the orbiter cargo bay in case an orbiter is not available. Approaches for a quicker escape or rescue capability are also recommended.

Source record↗

NASA NTRS1972

Dynamics and control of escape and rescue from a tumbling spacecraft

Papers on the problem of controlling a tumbling spacecraft before crew rescue is affected are presented. Fluid jets are considered; It is concluded that a gas jet results in long tumble times and low utilization efficiencies and a liquid jet appears more attractive because it can be directed. A conceptual design of an unmanned antitumbling module for automatic dock and detumble is formulated, and analyses of its dynamics and control, synthesis of position and attitude control systems, and sequence of operations are given. The minimum time detumble operation is analyzed with respect to (1) to a constraint on the magnitude of the control moment vector and (2) to constraints on the magnitude of each of the three components of the control moment vector. Internal passive and active mechanisms of energy dissipation are also considered. Structural flexibility modelling techniques and detumbling effects of structural flexibility on free-tumbling motion, are reviewed. Mass expulsion, momentum exchange, and moveable mass techniques are described, and methods of analyzing these devices are surveyed.

Kaplan, M. H.↗

NASA NTRS1976

Recovery from a tumbling condition in space

The Space Division of Rockwell International has examined means for arresting the motion of an out-of-control tumbling manned spacecraft. Twenty-three different concepts for checking the tumbling by using a rescue Space Shuttle have been evaluated. The most practical of these approaches were a stick-on rocket concept and a water-stream concept. Analysis of these two methods, which are described in this paper, shows that they are feasible and can be used to stop the worst-case tumbling considered and allow rescue of the crew with one Shuttle flight.

Canetti, G. S.↗

NASA NTRS1978

Electron paramagnetic resonance studies of slowly tumbling vanadyl spin probes in nematic liquid crystals

An analysis of EPR line shapes by the method of Polnaszek, Bruno, and Freed is made for slowly tumbling vanadyl spin probes in viscous nematic liquid crystals. The use of typical vanadyl complexes as spin probes for nematic liquid crystals is shown to simplify the theoretical analysis and the subsequent interpretation. Rotational correlation times tau and orientational ordering parameters S sub Z where slow tumbling effects are expected to be observed in vanadyl EPR spectra are indicated in a plot. Analysis of the inertial effects on the probe reorientation, which are induced by slowly fluctuating torque components of the local solvent structure, yield quantitative values for tau and S sub Z. The weakly ordered probe VOAA is in the slow tumbling region and displays these inertial effects throughout the nematic range of BEPC and Phase V. VOAA exhibits different reorientation behavior near the isotropic-nematic transition temperature than that displayed far below this transition temperature.

Bruno, G. V.↗

NASA NTRS1984

Preliminary results of experimental and analytical investigations of the tumbling phenomenon for an advanced configuration

A sustained autorotative pitching motion usually called 'tumbling' has been observed during dynamic model tests of the X-29A configuration. The X-29 is an advanced design incorporating forward-swept wings and canards in a highly relaxed static stability condition. Beginning with a historical review of the tumbling phenomenon, this paper discusses the current experimental results of dynamic model tumbling tests of the X-29 and the initial efforts to establish an aerodynamic and mathematical model for analysis.

Whipple, R. D.↗

NASA NTRS1986

Concept definition study for recovery of tumbling satellites. Volume 1: Executive summary, study results

The first assessment is made of the design requirements and conceptual definition of a front end kit to be transported on the currently defined Orbital Maneuvering Vehicle (OMV) and the Space Transportation System Shuttle Orbiter, to conduct remote, teleoperated recovery of disabled and noncontrollable, tumbling satellites. Previous studies did not quantify the dynamic characteristics of a tumbling satellite, nor did they appear to address the full spectrum of Tumbling Satellite Recovery systems requirements. Both of these aspects are investigated with useful results.

Cable, D. A.↗

NASA NTRS1991

Dynamics and control of a tumbling satellite retrieval device

The problem of capturing a satellite in an uncontrolled three-axis tumble is addressed. The proposed solution is a truss which opens and engulfs the satellite, resulting in coincident centers of mass. Torques are then applied to the truss so that it matches the tumble rates of the satellite and remains motionless in the satellite's reference frame. Equations are derived which show how to vary the mass distribution to match any set of inertia moment ratios. The physical system is shown to be controllable. An optimal control algorithm for tumble matching is then derived and a computer simulation is developed.

Neff, J. M.↗

NASA NTRS1999

Effect of field size, head motion, and rotational velocity on roll vection and illusory self-tilt in a tumbling room

The effect of field size, velocity, and visual fixation upon the perception of self-body rotation and tilt was examined in a rotating furnished room. Subjects sat in a stationary chair in the furnished room which could be rotated about the body roll axis. For full-field conditions, complete 360 degrees body rotation (tumbling) was the most common sensation (felt by 80% of subjects). Constant tilt or partial tumbling (less than 360 degrees rotation) occurred more frequently with a small field of view (20 deg). The number of subjects who experienced complete tumbling increased with increases in field of view and room velocity (for velocities between 15 and 30 degrees s-1). The speed of perceived self-rotation relative to room rotation also increased with increasing field of view.

Non-NASA Center↗

NASA NTRS1957

Concluding Report of Free-Spinning, Tumbling, and Recovery Characteristics of a 1/18-Scale Model of the Ryan X-13 Airplane, Coord. No. AF-199

An investigation has been completed in the Langley 20-foot free-spinning tunnel on a l/18-scale model of the Ryan X-13 airplane to determine its spin, recovery, and tumbling characteristics, and to determine the minimum altitude from which a belly landing could be made in case of power failure in hovering flight. Model spin tests were conducted with and without simulated engine rotation. Tests without simulated engine rotation indicated two types of spins: one, a slightly oscillatory flat spin; and the other, a violently oscillatory spin. Tests with simulated engine rotation indicated that spins to the left were fast rotating and steep and those to the right were slow rotating and flat. The optimum technique for recovery is reversal of the rudder to against the spin and simultaneous movement of the ailerons to full with the spin followed by movement of the elevators to neutral after the spin rotation ceases. Tumbling tests made on the model indicated that although the Ryan X-13 airplane will not tumble in the ordinary sense (end-over-end pitching motion), it may instead tend to enter a wild gyrating'motion. Tests made to simulate power failure in hovering flight by dropping the model indicated that the model entered what appeared to be a right spin. An attempt should be made to stop this motion immediately by moving the rudder to oppose the rotation (left pedal), moving the ailerons to with the spin (stick right), and moving the stick forward after the spin rotation ceases to obtain flying speed for pullout. The minimum altitude required for a belly landing in case of power failure in hovering flight was indicated to be about 4,200 feet.

Bowman, James S., Jr.↗

NASA NTRS2012

Optical Measurements of Tumbling Rocket Bodies

A component of interest in the active debris removal (ADR) effort in low Earth orbit is spent rocket upper stages. Proximity operations for such missions require an understanding of the tumbling characteristics of these targets. This research was conducted to assist in laying the ground work for realistic ADR mission planning. To better understand the tumbling characteristics of these spent upper stages, the NASA Orbital Debris Program Office has acquired over 400 recorded lightcurves using telescopes located in Colorado and New Mexico. This effort focuses on a population of over 250 Russian SL-8 and SL-16 spent upper stages. The oldest of these have been in orbit for 45 years, and some have exhibited unplanned orbit changes up to 22 years after launch. This paper describes the techniques of how this optical data was acquired and summarizes the optical signatures for this population of targets, including categorization, tumbling period, and investigations into specific targets in which the optical signature changed dramatically over different time periods. Results from period analysis performed on these lightcurves are summarized.

Read, J.↗

NASA NTRS1962

Analytical Study of the Tumbling Motions of Vehicles Entering Planetary Atmospheres

The tumbling motion of vehicles entering planetary atmospheres is analyzed. A differential equation governing the tumbling motion, its arrest, and the subsequent oscillatory motion is obtained and identified as the equation for the fifth Painleve transcendant. An approximate analytical solution for the transcendant is derived. Comparisons with results obtained from numerical integration of the exact equations of motion indicate that the solution for the angle-of-attack history is sufficiently accurate to be of practical use.

PLANETARY ENTRY↗

NASA NTRS1972

Dynamics and control of escape and rescue from a tumbling spacecraft

The results of 18 months of investigations are reported. A movable mass control system to convert the tumbling motion of a spacecraft into simple spin was studied along with the optimization techniques for generating displacement profiles for a tumbling asymmetrical body. Equations of motion are discussed for two asymmetrical vehicles with flexible beams and one spacecraft with flexible solar arrays. The characteristics which allow reasonable safety and reliability in bailout are also discussed.

Kaplan, M. H.↗

NASA NTRS1978

General heating distributions on the tumbling infinite cylinder

The Shuttle program plans to recover all flight hardware except the External Tank (ET). The ET reentry task requires the quaranteed safe disposal in a remote section and specific footprint of the Indian Ocean or the Antarctic Pacific. The ET is separated from the Orbiter at near orbital speeds and must reenter tumbling, to neutralize lift in an essentially ballistic trajectory. The aerothermodynamic heating becomes an intriguing, complex, and sophisticated series of flow field, boundary layer, and gas dynamic problems that is an important new technology in the reentering disposal task. The singular aspect given in this paper is the general heating distributions for all tumbling attitudes. The objective is to maintain simplicity in form but with variable coefficients to be analytically scaled to account for free molecule, convective laminar and turbulent flow, real gas dissociation or any Reynolds number or Mach number effects.

Carroll, H. R.↗