Search NASA⌕ Search

SEARCH · Search NASA

Results for “TaCo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

HP-TACO: A high-pressure triaxial compression apparatus for in situ x-ray measurements in geomaterials

Triaxial compression experiments are commonly used to characterize the elastic and inelastic behavior of geomaterials. In situ measurements of grain kinematics, particle breakage, stresses, and other microscopic phenomena have seldom been made during such experiments, particularly at high pressures relevant to many geologic and man-made processes, limiting our fundamental understanding. To address this issue, we developed a new triaxial compression device called HP-TACO (High-Pressure TriAxial COmpression Apparatus). HP-TACO is a miniaturized, conventional triaxial compression apparatus permitting confining pressures up to 50 MPa and deviatoric straining of materials, while also allowing in situ x-ray measurements of grain-scale kinematics and stresses. Here, in this study, we present the design of and first results from HP-TACO during its use in laboratory and synchrotron settings to study grain-scale kinematics and stresses in triaxially compressed sands subjected to 15 and 30 MPa confining pressures. The data highlight the unique capabilities of HP-TACO for studying the high-pressure mechanics of sands, providing new insight into micromechanical processes occurring during geologic and man-made processes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Extended Kohler's rule of magnetoresistance in TaCo 2 Te 2

TaCo 2 Te 2 is recently reported to be an air-stable, high mobility van der Waals material with probable magnetic order. Here we investigate the scaling behavior of its magnetoresistance. Here we measured both the longitudinal (p xx ) and Hall (p xy ) magnetoresistivities of TaCo 2 Te 2 crystals in magnetic fields parallel to the c axis and found that the magnetoresistance violates the Kohler's rule MR similar to f [H/p 0 ] while obeying the extended Kohler's rule MR ~ f [H/(n T p 0 )], where MR ~ [p xx (H) - p 0 ]/p 0 , H is the magnetic field, n T is a thermal factor, and p xx (H) and p 0 are the resistivities at H and zero field, respectively. Further, while deviating from those of the densities of electrons (n e ) and holes (n h ) obtained from the two-band model analysis of the magnetoconductivities, the temperature dependence of n T is close to that of the Hall carrier densities n H calculated from the slopes of p xy (H) curves at low magnetic fields, providing a different way to obtain the thermal factor in the extended Kohler's rule.

36 MATERIALS SCIENCE↗
DOE OSTI2021

SBIR Phase I Final Report, TACO: Distributed and Heterogeneous Sparse Compiler

Tensor algebra is a powerful tool for computing, but writing optimized codes that operate on sparse tensors can be very complex. This project enables a Tensor Algebra Compiler (TACO) that simplifies this task from man-years to man-days and extends TACO to support complex and large distributed systems. This report details the hypotheses, approaches used, and findings in this project.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Materials Data on TaCo by Materials Project

CoTa is Tetraauricupride structured and crystallizes in the cubic Pm-3m space group. The structure is three-dimensional. Ta is bonded in a body-centered cubic geometry to eight equivalent Co atoms. All Ta–Co bond lengths are 2.66 Å. Co is bonded in a body-centered cubic geometry to eight equivalent Ta atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Divertor heat load estimates on NSTX and DIII-D using new and open-source 2D inversion analysis code

A thermography inversion algorithm has been developed in the open-source Python-based computer code, HYPERION, to calculate the heat flux incident on plasma-facing components (PFCs) in axisymmetric tokamaks. The chosen mesh size at the surface significantly affects the calculated transient heat flux results. The calculated transient heat flux will exceed the real value when the mesh size tends to zero but will underestimate the real value when the mesh size is large. A criterion for determining the appropriate mesh size for the transient heat flux calculation will be discussed. The numerical scheme for HYPERION uses a 2D fully implicit finite-difference approach, allowing temperature-dependent thermal properties of PFC materials. The inversion algorithm is benchmarked against established heat flux calculation codes, TACO and THEODOR, based on thermography data from NSTX and DIII-D respectively. The primary benefits of HYPERION compared to TACO and THEODOR are that it is open-source and it allows for the optimization of mesh thickness along the substrate. The algorithm also accounts for the thermal properties of thin surface layers that characteristically form on PFCs due to plasma-material interactions. The agreement between HYPERION and THEODOR is excellent, as the percent difference between the codes is ~5% on average in the case of the DIII-D data for moderate to high heat flux. Verification tests with TACO show slightly higher average percent differences of 8% and 12%. In using HYPERION to study filaments in heat flux, the initial results indicate that small ELMs filaments significantly broaden the divertor heat flux, and decrease divertor peak flux. Compared to the inter-ELM, the small ELM filaments decrease the divertor peak surface temperature. With intermittent divertor filaments, the divertor heat flux width is comparable with that found in L-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1987

A natural language query system for Hubble Space Telescope proposal selection

The proposal selection process for the Hubble Space Telescope is assisted by a robust and easy to use query program (TACOS). The system parses an English subset language sentence regardless of the order of the keyword phases, allowing the user a greater flexibility than a standard command query language. Capabilities for macro and procedure definition are also integrated. The system was designed for flexibility in both use and maintenance. In addition, TACOS can be applied to any knowledge domain that can be expressed in terms of a single reaction. The system was implemented mostly in Common LISP. The TACOS design is described in detail, with particular attention given to the implementation methods of sentence processing.

Hornick, Thomas↗
DOE OSTI2022

Statistics on magnetic properties of Co compounds: A database-driven method for discovering Co-based ferromagnets

The search for new ferromagnetic compounds is often targeted at known structure families, particularly those containing iron, cobalt, and manganese. Here, we propose a method to expand this search to lesser-known structure types, using a database of experimental Curie and Néel temperatures. This study, in particular, illustrates the case of compounds containing the element cobalt, and we demonstrate how the use of such a database can lead to the discovery of ferromagnetic materials that had previously been overlooked. We report statistics from a literature survey of the magnetic properties of Co-based compounds with more than 33 at. % Co. We classify more than 13 000 compounds by structure type, cobalt content, and magnetic ground state. From these data, compounds TaCo 2 Ga, La 6 Co 13 Bi, and Nd 2 Co 3 were identified as potential ferromagnets, and we confirm their ferromagnetic ordering theoretically via first-principles calculations and experimentally via synthesis and characterization measurements. In addition, the analysis is focused on the collection of data trends and discovery of ferromagnetic materials with easy-axis magnetic anisotropy. Both known ferromagnetic materials with unknown magnetic anisotropy, and unstudied compounds were considered. From the subset of known ferromagnets with unknown anisotropy, the compound Co 2 Mg was synthesized, characterized, and determined to have easy-axis magnetic anisotropy at room temperature.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Survey of computer programs for heat transfer analysis

An overview is presented of the current capabilities of thirty-eight computer programs that can be used for solution of heat transfer problems. These programs range from the large, general-purpose codes with a broad spectrum of capabilities, large user community and comprehensive user support (e.g., ANSYS, MARC, MITAS 2 MSC/NASTRAN, SESAM-69/NV-615) to the small, special purpose codes with limited user community such as ANDES, NNTB, SAHARA, SSPTA, TACO, TEPSA AND TRUMP. The capabilities of the programs surveyed are listed in tabular form followed by a summary of the major features of each program. As with any survey of computer programs, the present one has the following limitations: (1) It is useful only in the initial selection of the programs which are most suitable for a particular application. The final selection of the program to be used should, however, be based on a detailed examination of the documentation and the literature about the program; (2) Since computer software continually changes, often at a rapid rate, some means must be found for updating this survey and maintaining some degree of currency.

Noor, A. K.↗
NASA NTRS1988

The proposal entry processor: Telescience applications for Hubble Space Telescope science operations

The Proposal Entry Processor (PEP) System supports the submission, entry, technical evaluation review, selection and implementation of Hubble Space Telescope (HST) observing proposals. The PEP system is described concentrating on features which illustrate principles of telescience as applied to the HST. These principles are applicable to other observatories, both space and ground based. The PEP proposal forms allow a scientist to specify scientific objectives without becoming needlessly involved in implementation details. The Remote Proposal Submission System (RPSS) allows proposers to submit proposals electronically via Telenet, SPAN, and other networks. The RPSS performs syntax and sematic checks on proposals. The PEP uses a fourth generation database system to store proposal information and to allow general queries and reports. The Transformation subsystem uses an expert system written in OPS5 to cast a scientific description of an observing program into parameters used by the planning and scheduling system. The TACOS system is a natural language database which supports the proposal selection process. Technical evaluations for resource usage and duplicate science are performed using rulebased systems.

Jackson, Robert↗
NASA NTRS1993

Heat Pipe Systems

The heat pipe was developed to alternately cool and heat without using energy or any moving parts. It enables non-rotating spacecraft to maintain a constant temperature when the surface exposed to the Sun is excessively hot and the non Sun-facing side is very cold. Several organizations, such as Tropic-Kool Engineering Corporation, joined NASA in a subsequent program to refine and commercialize the technology. Heat pipes have been installed in fast food restaurants in areas where humid conditions cause materials to deteriorate quickly. Moisture removal was increased by 30 percent in a Clearwater, FL Burger King after heat pipes were installed. Relative humidity and power consumption were also reduced significantly. Similar results were recorded by Taco Bell, which now specifies heat pipe systems in new restaurants in the Southeast.

Source record↗
NASA NTRS2010

The Atacama Cosmology Telescope: The Receiver and Instrumentation

The Atacama Cosmology Telescope was designed to measure small-scale anisotropies in the Cosmic Microwave Background and detect galaxy clusters through the Sunyaev-Zel'dovich effect. The instrument is located on Cerro Taco in the Atacama Desert, at an altitude of 5190 meters. A six-met.er off-axis Gregorian telescope feeds a new type of cryogenic receiver, the Millimeter Bolometer Array Camera. The receiver features three WOO-element arrays of transition-edge sensor bolometers for observations at 148 GHz, 218 GHz, and 277 GHz. Each detector array is fed by free space mm-wave optics. Each frequency band has a field of view of approximately 22' x 26'. The telescope was commissioned in 2007 and has completed its third year of operations. We discuss the major components of the telescope, camera, and related systems, and summarize the instrument performance.

Swetz, D. S.↗
NASA NTRS2024

GRACE and GRACE Follow-On Gravity Observations of Intermediate-Depth Earthquakes Contrasted with Those of Shallow Events

Earthquakes involve mass redistribution within the solid Earth and the ocean, and as a result, perturb the Earth's gravitational field. For most of the shallow (<60 km) earthquakes with Mw > 8.0, the GRACE satellite gravity measurements suggest considerable volumetric disturbance of rocks. At a spatial scale of hundreds of km, the effect of volumetric change exceeds gravity change by vertical deformation; for example, negative gravity anomalies associated with volumetric expansion are characteristic patterns after shallow thrust events. In this study, however, we report contrasting observations of gravity change from two intermediate-depth (100–150 km) earthquakes of 2016 & 2017 Mw 8.0 (two combined) Papua New Guinea thrust faulting events and 2019 Mw 8.0 Peru normal faulting and highlight the importance of compressibility in earthquake deformation. The combined 2016/17 thrust events resulted in a positive gravity anomaly of 5–6 microGal around the epicenter, while the 2019 normal faulting produced a negative gravity anomaly of 3–4 microGal. Our modeling found that these gravity changes are manifestation of vertical deformation with limited volumetric change, distinct from gravity changes after the shallow earthquakes. The stronger resistance of rocks to volume change at intermediate-depth results in largely incompressible deformation and thus in a gravity change dominated by vertical deformation. In addition, malleable rocks under high pressure and temperature at depth facilitated substantial afterslip and/or fast viscoelastic relaxation causing additional vertical deformation and gravity change equivalent to the coseismic change. For the Papua New Guinea events, this means that postseismic relaxation enhanced coseismic uplift and relative sea level decrease.

Shin-Chan Han↗