Search NASA⌕ Search

SEARCH · Search NASA

Results for “TcB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Thermally Conductive Backsheets (TCB) of PV Modules: Positive Impacts on Performance, Lifetime and LCOE

The operating temperatures of photovoltaic (PV) modules can be impacted by the selection of specific packaging materials, e.g., backsheets and encapsulants. This research focuses on the evaluation of operating temperature reduction of one-cell modules by comparing conventional Tedlar/polyester/Tedlar (TPT) backsheet with novel thermally conductive backsheets (TCBs) materials. A large number of one-cell modules with two TCB types (TCB_A and TCB_B) and baseline TPT type were fabricated and installed in three different climatic conditions of the hot-dry desert in Arizona (high and low wind speed locations) and North Carolina (temperate with low wind speed location). In this study, these two TCBs were compared with conventional TPT backsheet in terms of performance, lifetime and levelized cost of energy (LCOE). The field results were analyzed for thermal performance of TCBs compared to TPT at three sites for two and half years. This study concludes that the thermal and electrical performances of the PV modules can be improved by using TCB_A in hot and dry climate sites and TCB_B at temperate climate sites. Therefore, the lifetime of TCB-based modules is expected to be higher than TPT-based modules. Using backsheet-specific power degradation levels and assuming the same cost for both types of backsheets, the LCOE of modules using TCBs is estimated to be lower than that of TPT.

14 SOLAR ENERGY↗
DOE OSTI2020

Materials Data on TcB by Materials Project

TcB is Tetraauricupride structured and crystallizes in the cubic Pm-3m space group. The structure is three-dimensional. Tc3- is bonded in a body-centered cubic geometry to eight equivalent B3+ atoms. All Tc–B bond lengths are 2.37 Å. B3+ is bonded in a body-centered cubic geometry to eight equivalent Tc3- atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on TcB by Materials Project

TcB is Zincblende, Sphalerite structured and crystallizes in the cubic F-43m space group. The structure is three-dimensional. Tc3- is bonded to four equivalent B3+ atoms to form corner-sharing TcB4 tetrahedra. All Tc–B bond lengths are 2.05 Å. B3+ is bonded to four equivalent Tc3- atoms to form corner-sharing BTc4 tetrahedra.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on TcB by Materials Project

TcB is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Tc3- is bonded to six equivalent B3+ atoms to form a mixture of corner and edge-sharing TcB6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Tc–B bond lengths are 2.20 Å. B3+ is bonded to six equivalent Tc3- atoms to form a mixture of corner and edge-sharing BTc6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on TcB by Materials Project

TcB is Tungsten Carbide structured and crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. Tc3- is bonded to six equivalent B3+ atoms to form a mixture of distorted corner, edge, and face-sharing TcB6 pentagonal pyramids. All Tc–B bond lengths are 2.22 Å. B3+ is bonded to six equivalent Tc3- atoms to form a mixture of distorted corner, edge, and face-sharing BTc6 pentagonal pyramids.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on TcB by Materials Project

TcB is Tungsten Carbide-like structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional. Tc3- is bonded to six equivalent B3+ atoms to form a mixture of distorted edge, face, and corner-sharing TcB6 octahedra. The corner-sharing octahedral tilt angles are 44°. All Tc–B bond lengths are 2.23 Å. B3+ is bonded to six equivalent Tc3- atoms to form a mixture of distorted edge and corner-sharing BTc6 pentagonal pyramids.

36 MATERIALS SCIENCE↗
NASA NTRS1971

TCB operation supply inventory system /TCBSYS/

System produces inventory report for each updated period and special report for long term inventory information summary. Report summarizes consumption, outstanding orders, and balance of each inventory item. System generates, corrects, and adjusts inventory tapes. Restrictions of system are listed.

Tu, H.-Y.↗
DOE OSTI2022

A Novel EGFRvIII T-Cell Bispecific Antibody for the Treatment of Glioblastoma

Abstract T-cell bispecific antibodies (TCB) are engineered molecules that bind both the T-cell receptor and tumor-specific antigens. Epidermal growth factor receptor variant III (EGFRvIII) mutation is a common event in glioblastoma (GBM) and is characterized by the deletion of exons 2–7, resulting in a constitutively active receptor that promotes cell proliferation, angiogenesis, and invasion. EGFRvIII is expressed on the surface of tumor cells and is not expressed in normal tissues, making EGFRvIII an ideal neoantigen target for TCBs. We designed and developed a novel 2+1 EGFRvIII-TCB with optimal pharmacologic characteristics and potent antitumor activity. EGFRvIII-TCB showed specificity for EGFRvIII and promoted tumor cell killing as well as T-cell activation and cytokine secretion only in patient-derived models expressing EGFRvIII. Moreover, EGFRvIII-TCB promoted T-cell recruitment into intracranial tumors. EGFRvIII-TCB induced tumor regression in GBM animal models, including humanized orthotopic GBM patient-derived xenograft models. Our results warrant the clinical testing of EGFRvIII-TCB for the treatment of EGFRvIII-expressing GBMs.

Oncology↗
DOE OSTI2023

In Situ Study on Cu-to-Cu Thermal Compression Bonding

Cu-to-Cu thermal compression bonding (TCB) has emerged as a promising solution for ultrafine pitch packaging in 3D integrated circuit technologies. Despite the progress made by conventional Cu-to-Cu TCB methods in achieving good mechanical strength of the Cu bonds, the bonding processes generally require high temperature and high pressure, which may degrade the performance and reliability of the device. Therefore, it is imperative to investigate the processing parameters to understand the bonding mechanism and achieve effective TCB at a low temperature and low pressure. Here, we developed an in situ TCB technique inside a scanning electron microscope. The in situ TCB method enables a real-time observation of bonding development, which provides critical insights into how the texture and microstructure of Cu bumps may influence the creep and surface diffusion during the bonding process. This work features a strategy to advance our understanding of the bonding mechanisms and provides insight into tailoring the microstructure of Cu for bonding at a low temperature and low pressure.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Mechanism of cyanoacetylene photochemistry at 185 and 254 nm

The role of cyanoacetylene (HC3N) in the atmospheric photochemistry of Titan and its relevance to polymer formation are discussed. Investigation of the relative light absorption of HC3N, acetylene (C2H2), and diacetylene (C4H2) revealed that HC3N is an important absorber of UV light in the 205- to 225-nanometer wavelength region in Titan's polar regions. Laboratory studies established that photolysis of C2H2 initiates the polymerization of HC3N even though the HC3N is not absorbing the UV light. Quantum yield measurements establish that HC3N is 2-5 times as reactive as C2H2 for polymer formation. Photolysis of HC3N with 185-nanometer light in the presence of N2, H2, Ar, or CF4 results in a decrease in the yield of 1,3,5-tricyanobenzene (1,3,5-tcb), while photolysis in the presence of CH4, C2H6, or n-C4H10 results in an increase in 1,3,5-tcb. The rate of loss of HC3N is increased by all gases except H2, where it is unchanged. It was not possible to detect 1,3,5-tcb as a photoproduct when the partial pressure of HC3N was decreased to 1 torr. Photolysis of HC3N with 254-nanometer light in the presence of H2 or N2 results in the formation of 1,2,4-tcb, while photolysis in the presence of CH4, C2H6, or n-C4H10 results in the formation of increasing amounts of 1,3,5-tcb. Mechanisms for the formation of polymers are presented.

Non-NASA Center↗
NASA NTRSDate not supplied

Objectively Identifying Transverse Cirrus Bands in Tropical Cyclones using a Convolutional Neural Network

Transverse cirrus bands (TCBs) are bands of upper-level clouds regularly seen in mesoscale and synoptic-scale weather systems. In tropical cyclones, their appearance has been subjectively linked to intensification and the diurnal cycle. However, these hypothesized relationships have not been rigorously tested due to the subjective nature of TCBs in satellite images. A machine learning technique that successfully identifies TCBs objectively in imagery from the GOES-16 Advanced Baseline Imager (ABI) has been developed to solve this problem. The technique uses a U-Net convolutional neural network (CNN) that assigns a probability to each pixel in an image based on the likelihood of the pixel being associated with a TCB. Using the U-Net CNN, a database of TCBs from 2019 to 2022 was developed for the Atlantic tropical cyclone basin by defining an appropriate probability threshold that defines the difference between TCB and non-TCB pixels. This threshold is where the Jaccard score, calculated using manually identified TCBs and model identified TCBs, is maximized. Statistics for TCB occurrence will also be presented, including the relationships between TCBs and storm relative motion, shear relative direction, cardinal direction, tropical cyclone intensity, tropical cyclone intensification rates, and time of day.

John Mark Mayhall↗
DOE OSTI2024

Improved Organic Electrochemical Transistors via Directed Crystallizable Small Molecule Templating

Organic electrochemical transistors (OECTs) are of great interest as biosensors and for flexible electronics applications. Historically, processing techniques have been widely used to improve the performance of polymers in organic electronics but have been underutilized in the field of OECTs. Here, in this work, we study the effects of a crystallizable small molecule template for improving the performance of poly(3-hexylthiophene-2,5-diyl) (P3HT)-based OECTs. We utilize 1,3,5-trichlorobenzene (TCB) as a crystallizable additive to induce directional crystallization during blade coating. This procedure results in an aligned, highly ordered, and moderately porous layer of the semiconducting polymer. We find that compared to neat P3HT solutions, films cast with TCB additive show a greater than 8× improvement in the steady state figure of merit for OECTs. Additionally, the optimum TCB loading produces anisotropic OECTs where the polymer chain aligned parallel to the current outperforms the perpendicular alignment by more than a factor of 10. We investigated the mechanism of this improvement and found that polymer alignment, polymer ordering, and film porosity all play a role in improving the device performance. Overall, these results demonstrate the importance of processing on the optimization of polymers for OECTs and suggest a route to greatly improve the performance of commercially available hydrophobic polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microgravity crystallization of perdeuterated tryptophan synthase for neutron diffraction

Abstract Biologically active vitamin B 6 -derivative pyridoxal 5′-phosphate (PLP) is an essential cofactor in amino acid metabolic pathways. PLP-dependent enzymes catalyze a multitude of chemical reactions but, how reaction diversity of PLP-dependent enzymes is achieved is still not well understood. Such comprehension requires atomic-level structural studies of PLP-dependent enzymes. Neutron diffraction affords the ability to directly observe hydrogen positions and therefore assign protonation states to the PLP cofactor and key active site residues. The low fluxes of neutron beamlines require large crystals (≥0.5 mm 3 ). Tryptophan synthase (TS), a Fold Type II PLP-dependent enzyme, crystallizes in unit gravity with inclusions and high mosaicity, resulting in poor diffraction. Microgravity offers the opportunity to grow large, well-ordered crystals by reducing gravity-driven convection currents that impede crystal growth. We developed the Toledo Crystallization Box (TCB), a membrane-barrier capillary-dialysis device, to grow neutron diffraction-quality crystals of perdeuterated TS in microgravity. Here, we present the design of the TCB and its implementation on Center for Advancement of Science in Space (CASIS) supported International Space Station (ISS) Missions Protein Crystal Growth (PCG)-8 and PCG-15. The TCB demonstrated the ability to improve X-ray diffraction and mosaicity on PCG-8. In comparison to ground control crystals of the same size, microgravity-grown crystals from PCG-15 produced higher quality neutron diffraction data. Neutron diffraction data to a resolution of 2.1 Å has been collected using microgravity-grown perdeuterated TS crystals from PCG-15.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Non-reactive facet specific adsorption as a route to remediation of chlorinated organic contaminants

The present work quantifies metal-contaminant interactions between palladium substrates and three salient chlorinated organic contaminants, namely trichloroethylene 1,3,5-trichlorobenzene (TCB), and 3,3′,4,4′-tetrachlorobiphenyl (PCB77). Given that Pd is one of the conventional catalytically active materials known for contaminant removal, maximizing catalytic efficiency through optimal adsorption dynamics reduces the cost of remediation of contaminants that are persistent water pollutants chronically affecting public health. Adsorption efficiency analyses from all-atom molecular dynamics (MD) simulations advance the understanding of reaction mechanisms available from density functional theory (DFT) calculations to an extractable feature scale that can fit the parametric design of supported metal catalytic systems and feed into high throughput catalyst selection. Data on residence time, site-specific adsorption, binding energies, packing geometries, orientation profiles, and the effect of adsorbate size show the anomalous behaviour of organic contaminant adsorption on the undercoordinated {110} surface as compared to the {111} and {100} surfaces. The intermolecular interaction within contaminants from molecular dynamics simulation exhibits refreshing results than ordinary single molecule density functional theory calculation. Since complete adsorption and dechlorination is an essential step for chlorinated organic contaminant remediation pathways, the presented profiles provide essential information for designing efficient remediation systems through facet-controlled palladium nanoparticles.

Guo, Hao↗
NASA NTRSDate not supplied

Objectively Identifying Transverse Cirrus Bands in Tropical Cyclones using a Convolutional Neural Network

Transverse cirrus bands (TCBs) are bands of upper-level clouds that are regularly seen in mesoscale and synoptic-scale weather systems. In tropical cyclones, their appearance has been subjectively linked to intensification and the diurnal cycle, but these hypothesized relationships have not been rigorously tested due to the difficulty of objectively identifying TCBs in satellite images. This presentation describes a machine learning technique that successfully identifies TCBs in imagery from the GOES-16 Advanced Baseline Imager. The technique uses a convolutional neural network (CNN) that assigns a probability of each pixel in the image being associated with a TCB. Using the CNN, a database of TCBs from 2018 to 2022 was developed for the Atlantic basin. Statistics using this database will be presented, including the relationship between TCBs and deep-layer vertical wind shear, intensity change, and the TC diurnal cycle.

John Mark Mayhall↗
NASA NTRS1998

Time Scales in the JPL and CfA Ephemerides

Over the past decades, the IAU has repeatedly attempted to correct its definition of the basic fundamental argument used in the emphemerides. Finally, they have defined a time system which is physically possible, according to the accepted standard theory of gravitation.

time CfA ephemerides ephemerides time ET-TDB-TCB↗