Search NASA⌕ Search

SEARCH · Search NASA

Results for “Technology Deployment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Deployment Technology of a Heliogyro Solar Sail for Long Duration Propulsion

Interplanetary, multi-mission, station-keeping capabilities will require that a spacecraft employ a highly efficient propulsion-navigation system. The majority of space propulsion systems are fuel-based and require the vehicle to carry and consume fuel as part of the mission. Once the fuel is consumed, the mission is set, thereby limiting the potential capability. Alternatively, a method that derives its acceleration and direction from solar photon pressure using a solar sail would eliminate the requirement of onboard fuel to meet mission objectives. MacNeal theorized that the heliogyro-configured solar sail architecture would be lighter, less complex, cheaper, and less risky to deploy a large sail area versus a masted sail. As sail size increases, the masted sail requires longer booms resulting in increased mass, and chaotic uncontrollable deployment. With a heliogyro, the sail membrane is stowed as a roll of thin film forming a blade when deployed that can extend up to kilometers. Thus, a benefit of using a heliogyro-configured solar sail propulsion technology is the mission scalability as compared to masted versions, which are size constrained. Studies have shown that interplanetary travel is achievable by the heliogyro solar sail concept. Heliogyro solar sail concept also enables multi-mission missions such as sample returns, and supply transportation from Earth to Mars as well as station-keeping missions to provide enhanced warning of solar storm. This paper describes deployment technology being developed at NASA Langley Research Center to deploy and control the center-of-mass/center-of-pressure using a twin bladed heliogyro solar sail 6-unit (6U) CubeSat. The 6U comprises 2x2U blade deployers and 2U for payload. The 2U blade deployers can be mounted to 6U or larger scaled systems to serve as a non-chemical in-space propulsion system. A single solar sail blade length is estimated to be 2.4 km with a total area from two blades of 720 m2; total allowable weight of a 6U CubeSat is approximately 8 kg. This makes the theoretical characteristic acceleration of approximately 0.75 mm/s2 at I AU (astronomical unit), when compared to IKAROS (0.005 mm/s2) and NanoSail-D (0.02 mm/s2).

Peerawan, Wiwattananon↗
NASA NTRS2012

Enabling Venus In-Situ Science - Deployable Entry System Technology, Adaptive Deployable Entry and Placement Technology (ADEPT): A Technology Development Project funded by Game Changing Development Program of the Space Technology Program

Venus is one of the important planetary destinations for scientific exploration, but: The combination of extreme entry environment coupled with extreme surface conditions have made mission planning and proposal efforts very challenging. We present an alternate, game-changing approach (ADEPT) where a novel entry system architecture enables more benign entry conditions and this allows for greater flexibility and lower risk in mission design

Wercinski, Paul F.↗
NASA NTRS2020

A Review of Welding in Space and Related Technologies

Deployment of welding and additive manufacturing (AM) technologies in the space environment has the potential to revolutionize how orbiting platforms are designed, manufactured, and assembled. These technologies offer the option for repair of sustained damage to habitat structures on space missions, as astronauts would be able to manufacture new parts (using welding-derived AM processes suitable for use in the external space environment) and weld cracks. An added benefit is that required repairs can be achieved more economically, as new parts need not be shipped from Earth. With further maturation of in-space welding capabilities, astronauts could operate under given standards and weld damaged structures rather than rely on cargo resupply. This Technical Memorandum (TM) begins by reviewing the available literature relevant to welding in space, focusing on solidification, heat and mass transfer, and fluid flows in microgravity. This survey considers research on the effects of welding in microgravity on a material system. The various in-space welding devices that have been previously designed and tested are examined to determine their capabilities and shortcomings, with a focus on the results of their individual welding experiments. Safety measures are discussed to protect the orbiting International Space Station (ISS) and crew during welding operations. Finally, the state of the art is examined by focusing on current approaches to AM and on-orbit welding that are being developed by several companies in conjunction with NASA.

Naden, N.↗
NASA NTRS1979

Deployable antenna technology development for the Large Space Systems Technology program

The critical technologies associated with the development of deployable reflector antenna technology for the LSST program will be derived from NASA mission models and the subsequent requirements will be related to the classes of missions involved. The approach formulated for the development of reflector technology is based on the development of specific reflector concepts that have been identified as leading candidates for future applications. The development approach will be augmented by supporting technology disciplines such as controls, materials, electromagnetic analysis, as well as the capability of analytically predicting the overall performance of the large space system.

Freeland, R. E.↗
NASA NTRSDate not supplied

Arc-jet Testing of Continuously Woven Aeroshells–Spiderweave–for Adaptable Deployable Entry Placement Technology

The Adaptable, Deployable Entry Placement Technology (ADEPT) is an entry system that, when deployed, creates a large, umbrella-like drag surface that can be used to decelerate spacecraft during atmospheric entry, resulting in lower entry loads and heating than a rigid aeroshell of equivalent mass. Until needed for entry, the system can remain stowed, enabling missions to overcome launch vehicle fairing diameter constraints. 12-inch diameter umbrella-like articles, similar to a small reentry probe using ADEPT, were tested in the Ames 20-MWAerodynamic Heating Facility. Performance of the test articles built with a novel, continuously woven aeroshell construction (called Spiderweave) is compared against those built with legacy construction styles. In addition, candidate thermal protective layer treatments applied to structurally sensitive regions of the aeroshell are assessed using data from on-board instrumentation as well as facility optical instruments.

ADEPT↗
NASA NTRSDate not supplied

Aerothermal Uncertainty Quantification of Deployable Entry Technologies Using Multi-Fidelity Modeling

The objective of this work was to investigate the use of a co-Kriging based multi-fidelity modeling approach with a Monte Carlo uncertainty quantification analyses of surface heating on hypersonic inflatable aerodynamic decelerator vehicles and adaptable, deployable entry placement technology vehicles in Mars entry. A previously developed co-Kriging based multi-fidelity modeling approach was used to model the laminar and turbulent convective and radiative heat fluxes along the vehicle. Monte Carlo analyses of surface heat load for nine different vehicle nose radii was performed for both vehicles, assuming the same thermal protection system is used for both vehicles. The maximum heat loads and heat load uncertainties were found to occur at either the stagnation point or the vehicle shoulder. The maximum 95% confidence intervals for the total heat load for the hypersonic inflatable aerodynamic decelerator vehicle were found to be [-9.27, 7.81] % of the nominal value and [-6.09, 13.1] % of the nominal value for laminar and turbulent flow, respectively. The maximum 95% confidence intervals for the total heat load for the adaptable, deployable entry placement technology vehicle were found to be [-8.85, 7.22] % of the nominal value and [-9.33, 9.35] % of the nominal value for laminar and turbulent flow, respectively. The difference in heating uncertainties based on vehicle geometry between the two vehicle technologies was found to be minimal.

Mario Santos↗
NASA NTRS2018

Technology and Opportunities of Photon Sieve CubeSat with Deployable Optical Membrane

A photon sieve (PS) is a revolutionary optical instrument that provides high resolution imaging at a fraction of the weight of typical telescopes, with an areal density of 0.3 kg/m2 compared to 25 kg/m2 for the James Webb Space Telescope. The photon sieve is a variation of a Fresnel Zone Plate consisting of many small holes arranged in a series of concentric rings. The sieve works by diffracting light of a certain wavelength to a specified focal point for imaging, so that only a specific wavelength can be imaged. Moreover, the better image contrast and higher signal-to-noise ratios come from suppressing higher diffracted orders by apodizing the number of pinholes in the outer rings. Finally, a photon sieve requires less supports and can withstand more deformation without a reduction in the imaging qualities. Due to these properties, various groups have created PS CubeSats for Earth and Sun imaging at a low cost and weight specifically using deployable technology. A team at the Air Force Research Laboratory created a design and prototype of a mechanism that deploys a 20 cm diameter photon sieve. The United States Air Force Laboratory used a similar design to create a CubeSat-based deployable photon sieve. The team at NASA Langley Research Center has researched photon sieves for conducting an Earth-observing experiment using LIDAR (Light Detection and Ranging) with a higher signal-to-noise ratio benefit from the PS. This paper provides a state of the art overview on existing PS CubeSat technology with deployable structures and applications. Especially, the paper introduces PS for LIDAR applications and discusses the CubeSat-based PS challenge being worked at the NASA Langley Research Center.

Hyun Jung Kim↗
NASA NTRS1988

Development of a verification program for deployable truss advanced technology

Use of large deployable space structures to satisfy the growth demands of space systems is contingent upon reducing the associated risks that pervade many related technical disciplines. The overall objectives of this program was to develop a detailed plan to verify deployable truss advanced technology applicable to future large space structures and to develop a preliminary design of a deployable truss reflector/beam structure for use a a technology demonstration test article. The planning is based on a Shuttle flight experiment program using deployable 5 and 15 meter aperture tetrahedral truss reflections and a 20 m long deployable truss beam structure. The plan addresses validation of analytical methods, the degree to which ground testing adequately simulates flight and in-space testing requirements for large precision antenna designs. Based on an assessment of future NASA and DOD space system requirements, the program was developed to verify four critical technology areas: deployment, shape accuracy and control, pointing and alignment, and articulation and maneuvers. The flight experiment technology verification objectives can be met using two shuttle flights with the total experiment integrated on a single Shuttle Test Experiment Platform (STEP) and a Mission Peculiar Experiment Support Structure (MPESS). First flight of the experiment can be achieved 60 months after go-ahead with a total program duration of 90 months.

Dyer, Jack E.↗
NASA NTRS2016

System Level Aerothermal Testing for the Adaptive Deployable Entry and Placement Technology (ADEPT)

The Adaptive Deployable Entry and Placement Technology (ADEPT), a mechanically deployable entry vehicle technology, has been under development at NASA since 2011. As part of the technical maturation of ADEPT, designs capable of delivering small payloads (10 kg) are being considered to rapidly mature sub 1 m deployed diameter designs. The unique capability of ADEPT for small payloads comes from its ability to stow within a slender volume and deploy to achieve a mass efficient drag surface with a high heat rate capability. The low ballistic coefficient results in entry heating and mechanical loads that can be met by a revolutionary three-dimensionally woven carbon fabric supported by a deployable skeleton structure. This carbon fabric has test proven capability as both primary structure and payload thermal protection system. In order to rapidly advance ADEPTs technical maturation, the project is developing test methods that enable thermostructural design requirement verification of ADEPT designs at the system level using ground test facilities. Results from these tests are also relevant to larger class missions and help us define areas of focused component level testing in order to mature material and thermal response design codes. The ability to ground test sub 1 m diameter ADEPT configurations at or near full-scale provides significant value to the rapid maturation of this class of deployable entry vehicles. This paper will summarize arc jet test results, highlight design challenges, provide a summary of lessons learned and discuss future test approaches based upon this methodology.

Hypersonic↗
NASA NTRS2012

Structures and Mechanisms Design Concepts for Adaptive Deployable Entry Placement Technology

System studies have shown that large deployable aerodynamic decelerators such as the Adaptive Deployable Entry and Placement Technology (ADEPT) concept can revolutionize future robotic and human exploration missions involving atmospheric entry, descent and landing by significantly reducing the maximum heating rate, total heat load, and deceleration loads experienced by the spacecraft during entry [1-3]. ADEPT and the Hypersonic Inflatable Aerodynamic Decelerator (HIAD) [4] share the approach of stowing the entry system in the shroud of the launch vehicle and deploying it to a much larger diameter prior to entry. The ADEPT concept provides a low ballistic coefficient for planetary entry by employing an umbrella-like deployable structure consisting of ribs, struts and a fabric cover that form an aerodynamic decelerator capable of undergoing hypersonic flight. The ADEPT "skin" is a 3-D woven carbon cloth that serves as a thermal protection system (TPS) and as a structural surface that transfers aerodynamic forces to the underlying ribs [5]. This paper focuses on design activities associated with integrating ADEPT components (cloth, ribs, struts and mechanisms) into a system that can function across all configurations and environments of a typical mission concept: stowed during launch, in-space deployment, entry, descent, parachute deployment and separation from the landing payload. The baseline structures and mechanisms were selected via trade studies conducted during the summer and fall of 2012. They are now being incorporated into the design of a ground test article (GTA) that will be fabricated in 2013. It will be used to evaluate retention of the stowed configuration in a launch environment, mechanism operation for release, deployment and locking, and static strength of the deployed decelerator. Of particular interest are the carbon cloth interfaces, underlying hot structure, (Advanced Carbon- Carbon ribs) and other structural components (nose cap, struts, and main body) designed to withstand the pressure and extremely high heating experienced during planetary entry.

Yount, Bryan C.↗
NASA NTRS2009

From LEO, to the Moon and then Mars: Developing a Global Strategy for Exploration Risk Reduction

Most nations currently involved in human spaceflight, or with such ambitions, believe that space exploration will capture the imagination of our youth resulting in future engineers and scientists, advance technologies which will improve life on earth, increase the knowledge of our solar system, and strengthen bonds and relationships across the globe. The Global Exploration Strategy, published in 2007 by 14 space agencies, eloquently makes this case and presents a vision for space exploration. It argues that in order for space exploration to be sustainable, nations must work together to address the challenges and share the burden of costs. This paper will examine Mars mission scenarios developed by NASA, ESA and other agencies and show resulting conclusions regarding key challenges, needed technologies and associated mission risks. It will discuss the importance of using the International Space Station as a platform for exploration risk reduction and how the global exploration community will develop lunar exploration elements and architectures that enable the long term goal of human missions to Mars. The International Space Station (ISS) is a critical first step both from a technology and capability demonstration point of view, but also from a partnership point of view. There is much work that can be done in low earth orbit for exploration risk reduction. As the current "outpost at the edge of the frontier", the ISS is a place where we can demonstrate certain technologies and capabilities that will substantially reduce the risk of deploying an outpost on the lunar surface and Mars mission scenarios. The ISS partnership is strong and has fulfilled mission needs. Likewise, the partnerships we build on the moon will provide a strong foundation for establishing partnerships for the human Mars missions. On the moon, we build a permanently manned outpost and deploy technologies and capabilities to allow humans to stay for long periods of time. The moon is interesting from a scientific point of view, but it is extremely important for development and demonstration the technologies and capabilities needed for human missions to Mars. This paper will show the logic and strategy for addressing technological, operational and programmatic challenges by using low earth orbit and lunar missions to enable the long term goal of exploration of our solar system.

Laurini, Kathleen C.↗
NASA NTRS1992

NASA technology transfer network communications and information system: TUNS user survey

Applied Expertise surveyed the users of the deployed Technology Utilization Network System (TUNS) and surveyed prospective new users in order to gather background information for developing the Concept Document of the system that will upgrade and replace TUNS. Survey participants broadly agree that automated mechanisms for acquiring, managing, and disseminating new technology and spinoff benefits information can and should play an important role in meeting NASA technology utilization goals. However, TUNS does not meet this need for most users. The survey describes a number of systematic improvements that will make it easier to use the technology transfer mechanism, and thus expedite the collection and dissemination of technology information. The survey identified 26 suggestions for enhancing the technology transfer system and related processes.

Source record↗
NASA NTRS1984

The Large Deployable Reflector - A technology development challenge

The proposed Large Deployable Reflector (LDR) telescope is an astrophysical orbiting platform whose aperture is of the order of 20 m, and is dedicated to observations in the IR and sub-mm wavelengths. NASA is currently planning a 5-year technology development program that will allow the requisite hardware and software to reach the state required for economical and reliable implementation. A computer model simulation is envisioned toward this end that will encompass and integrate structural, thermal, control, optics, and systems program elements. Possession of the enabling technology is foreseen for the early 1990s.

Pittman, R. B.↗
NASA NTRS2014

Adaptable Deployable Entry & Placement Technology (ADEPT) for Cubesat Delivery to Mars Surface

The Adaptable, Deployable Entry and Placement Technology (ADEPT), uses a mechanical skeleton to deploy a revolutionary carbon fabric system that serves as both heat shield and primary structure during atmospheric entry. The NASA ADEPT project, currently funded by the Game Changing Development Program in STMD is currently focused on 1m class hypersonic decelerators for the delivery of very small payloads ( 5 kg) to locations of interest in an effort to leverage low-cost platforms to rapidly mature the technology while simultaneously delivering high-value science. Preliminary mission design and aerothermal performance testing in arcjets have shown the ADEPT system is quite capable of safe delivery of cubesats to Mars surface. The ability of the ADEPT to transit to Mars in a stowed configuration (similar to an umbrella) provides options for integration with the Mars 2020 cruise stage, even to consider multiple ADEPTs. System-level test campaigns are underway for FY15 execution or planning for FY16. These include deployment testing, wind tunnel testing, system-level arc jet testing, and a sounding rocket flight test. The goal is system level maturation (TRL 6) at a 1m class Mars design reference mission configuration.

3D Woven↗
NASA NTRS1991

Real Time Data System (RTDS)

Information is given in viewgraph form on the Real Time Data System (RTDS). The goals are to increase the quality of flight decision making, reduce and enhance flight controller training time, and serve as a near-operations technology test-bed. Information is given on the growth of RTDS; flight control disciplines; RTDS technology deployment in 1987-1989 and 1990-91; a functionality comparison of mainframes and workstations; and technology transfer activities.

Heindel, Troy A.↗