Search NASA⌕ Search

SEARCH · Search NASA

Results for “Telescope, Dishes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

A Computer Program to Generate Tri-Truss Structures for On- and Off-Axis Telescope Dishes

The size of traditional space telescopes has been limited by the size of the launch vehicle shroud size. Designs of space telescopes with larger apertures and greater resolving power can be achieved with multiple launches incorporating modular elements and in-space assembly techniques. The modular elements of an in-space assembled telescope include segmented reflectors supported on an assembled truss structure. The modular truss structures are most commonly based on a tessellation of triangles across a reflector’s surface, and in some cases utilize deployable trusses to simplify in-space assembly. One design effort, the in-Space Assembled Telescope (iSAT), proposes the use of deployable “tri-truss” modules to form an off-set parabolic reflector. In support of the iSAT, a computer program was developed to tesselate tri-truss modules over a parabolic surface. Based on several user-defined variables, the program renders a tri-truss structure and generates a stereolithography file of the generated truss structure for three dimensional (3D) printing. In addition, due to the importance of packing efficiency for space launch, the program attempts to minimize unnecessary differences in strut lengths using a grade parameter based on previous work.

Structures↗
NASA NTRS2010

About the Compatibility of DORIS and VLBI Observations

We investigated the compatibility of the DORIS and VLBI observations at Badary Observatory. The DORIS beacon stands at 100-m distance from the main radio telescope dish and transmits signals on two frequencies: 2036.25 MHz and 401.25 MHz. The latter frequency is modulated to send messages containing an ID number, timing information, data from the meteorological sensors, and engineering data (e.g., power). Both frequencies affect the S/X band radio telescope receivers. The parameters of the DORIS signals were measured at the outputs of the S/X band intermediate frequency amplifier. It was found that: (1) The level of RFI, produced by the DORIS beacon, practically corresponds to the level of the system (antenna plus receiver) noise signal and does not overload the S/X band receivers. (2) The DORIS 401.25 MHz signal is out of the frequency bands recorded during standard VLBI sessions. As a result, RFI from DORIS does not affect VLBI observations. This conclusion was confirmed after data correlations of actual VLBI observations that were conducted with the DORIS beacon turned on/off.

Il'in, Gennady↗
NASA NTRS1993

Observations of IRAS F10214+4724 at the Nobeyama millimeter array

F10214+4724 is an IRAS source at z=2.286 with L(sub FIR) approximately 10(exp 14) solar luminosity. The CO(3-2) emission was detected at the NRAO 12-m telescope, and its molecular gas mass was estimated to be (1-3)x10(exp 11) solar mass. This object is unique and important because it is the first high-z object from which molecular line emission is detected and it enables us to investigate molecular gas content, star forming material, at an early stage of galactic evolution. If IRAS F10214+4724 is a primeval galaxy at the formation process, it is possible the gas has not been collapsed yet to the galactic scale. On the other hand, it is also possible IRAS F10214+4724 is a merging or interacting system like the most of ultra-luminous infrared galaxies. However, since the first detection was made with a medium size single-dish telescope, the precise position, extent, and distribution of the molecular gas had not been determined. The aim of our aperture synthesis observations is therefore to determine position and distribution of molecular gas.

Sakamoto, K.↗
NASA NTRS1993

The contribution of disks and envelopes to the millimeter continuum emission from very young low-mass stars

We investigate the question of disk formation during the protostar phase. We model the dust continuum emission from the dense cloud core using the cloud-collapse models of Terebey et al. (1984) and show that dust emission from the dense core is important when measured with large single-dish telescopes at 1.3 mm, but nearly negligible with interferometers at 2.7 mm. From published and new data, we conclude that massive disks are also seen toward a number of other sources including L1448 IRS 3, whose disk mass is estimated to be 0.5 solar mass. However, 1.3 mm data show that massive disks are relatively rare, occurring around perhaps 5 percent of young embedded stars. This implies that either massive disks occur briefly during the embedded phase or that relatively few young stars form massive disks. The median 1.3 mm flux density of IRAS-Dense cores in our sample is nearly the same as T Tauri stars in the sample of Beckwith et al. (1990). We conclude that the typical disk mass is not significantly higher during the embedded phase than during the later T Tauri phase.

Terebey, S.↗
NASA NTRS2019

ALMA Autocorrelation Spectroscopy of Comets: the HCN/H13CN Ratio in C/2012 S1 (ISON)

The Atacama Large Millimeter/submillimeter Array (ALMA) is a powerful tool for high-resolution mapping of comets, but the main interferometer (comprised of 50×12-m antennas) is insensitive to the largest coma scales due to a lack of very short baselines. In this work, we present a new technique employing ALMA autocorrelation data (obtained simultaneously with the interferometric observations), effectively treating the entire 12-m array as a collection of single-dish telescopes. Using combined autocorrelation spectra from 28 active antennas, we recovered extended HCN coma emission from comet C/2012 S1 (ISON), resulting in a fourteen-fold increase in detected line brightness compared with the interferometer. This resulted in the first detection of rotational emission from H13CN in this comet. Using a detailed coma radiative transfer model accounting for optical depth and non-LTE excitation effects, we obtained an H12CN/H13CN ratio of 88±18, which matches the terrestrial value of 89, consistent with a lack of isotopic fractionation in HCN during comet formation in the protosolar accretion disk. The possibility of future discoveries in extended sources using autocorrelation spectroscopy from the main ALMA array is thus demonstrated.

M A Cordiner↗
NASA NTRS1986

Dark filaments observed at 8.3mm and 3.1mm wavelength

Mapping of the sun was made at 3.1mm (98 GHz) and 8.3mm (36 GHz) wavelengths with a 45m dish radio telescope at the Nobeyama Cosmic Radio Observatory. The depressions associated with large H alpha filaments are derived to be -0.2 at 8.3mm and -0.05 at 3.1mm, which are darker than the values inferred by Raoult et al. (1979)

Hiel, E.↗
NASA NTRS2026

The Canadian Galactic Emission Mapper (CGEM) A Cosmic Microwave Foreground Experiment

The Canadian Galactic Emission Mapper (CGEM) is a 4-meter single-dish radio telescope located at the Dominion Radio Astrophysical Observatory (DRAO) in Penticton, Canada. CGEM is designed to map polarized Galactic synchrotron emission across the entire northern sky at 8-10 GHz with 1 MHz frequency resolution and ∼ 0.5 degree angular resolution. Its goal is to obtain high-fidelity, low-noise maps of polarized Galactic synchrotron radiation, at frequencies where synchrotron dominates, in order to provide a reliable template for CMB B−mode foreground cleaning. We will show on sky performance of CGEM’s single-pixel azimuthally-symmetric telescope, its coherent, dual-polarized radiometer, and show maps made from commissioning data from the first few months of operation.

Cosmic microwave background↗
NASA NTRS2013

PKS 2123-463: A Confirmed Gamma-ray Blazar at High Redshift

The flat spectrum radio quasar (FSRQ) PKS 2123−463 was associated in the first Fermi- Large Area Telescope (LAT) source catalogue with the gamma-ray source 1FGL J2126.1−4603, but when considering the full first two years of Fermi observations, no gamma-ray source at a position consistent with this FSRQ was detected, and thus PKS 2123−463 was not reported in the second Fermi-LAT source catalogue. On 2011 December 14 a gamma-ray source positionally consistent with PKS 2123−463 was detected in flaring activity by Fermi-LAT. This activity triggered radio-to-X-ray observations by the Swift,Gamma-ray Optical/Near-Infrared Detector (GROND), Australia Telescope Compact Array (ATCA), Ceduna and Seven Dishes Karoo Array Telescope (KAT-7) observatories. Results of the localization of the gamma-ray source over 41 months of Fermi-LAT operation are reported here in conjunction with the results of the analysis of radio, optical, ultraviolet (UV) and X-ray data collected soon after the gamma-ray flare. The strict spatial association with the lower energy counterpart together with a simultaneous increase of the activity in optical, UV, X-ray and gamma-ray bands led to a firm identification of the gamma-ray source with PKS 2123−463. A new photometric redshift has been estimated as z = 1.46 plus or minus 0.05 using GROND and Swift Ultraviolet/Optical Telescope (UVOT) observations, in rough agreement with the disputed spectroscopic redshift of z = 1.67.We fit the broad-band spectral energy distribution with a synchrotron/external Compton model. We find that a thermal disc component is necessary to explain the optical/UV emission detected by Swift/UVOT. This disc has a luminosity of approximately 1.8 x 10(exp 46) erg s(exp -1), and a fit to the disc emission assuming a Schwarzschild (i.e. non-rotating) black hole gives a mass of approximately 2 x 10(exp 9) solar mass. This is the first black hole mass estimate for this source.

redshift↗
NASA NTRS1990

Foundation design for a radio telescope on the moon

A foundation design for a 122 m diameter dish-type radio telescope on the moon is presented. The 1.2 m wide and 43 m diameter circular strip footing was analyzed for settlement due to compaction during installation and also for total and differential settlement under in-service laods. An axisymmetrical finite element code of the uppdated Lagrangian formulation was used. Interface slip elements were also used. The nonlinear hyperbolic stress-strain model parameters for the regolith were derived from load-deflection characteristics of astronauts' bootprints and the Rover tracks.

Chua, Koon Meng↗
NASA NTRS2020

The Potential for a K-Band Receiver on the Large Millimeter Telescope

The 50-meter Large Millimeter Telescope (LMT) operating on the Sierra Negra in Mexico is the largest single- dish millimeter-wave telescope in the world. Although designed to work in the 3 mm and 1 mm bands, there is significant potential for LMT observations at centimeter wavelengths. Here, we summarize the scientific case and operational arguments for a K-band receiver system on the LMT, describe several of the unique technical challenges that the proposed installation would entail, and mention some possible solutions to these challenges.

Velazquez de la Rosa Becerra, Miguel↗
NASA NTRS1983

A helium-3 cooled bolometer system for one millimeter continuum observations

A new, 1-mm-continuum, bolometer detector system has been constructed employing internal adsorption pumping of He-3 to reach an operating temperature close to 0.4 K. The system spectral bandwidth is 800 to 1200 microns. Although the system was originally designed to be used on the 5-m Hale telescope, it has also been successfully used on the 4-m Anglo-Australian telescope and on the 10-m dish at Owens Valley, California. At the 5-m Hale telescope, the system has a full width-half maximum (FWHM) beam size of 55 sec and an instantaneous noise-equivalent flux density of 6 Jy/square root of (Hz)/ in good weather.

Roellig, T. P. L.↗
NASA NTRS1987

Fiber-linked telescope arrays on the ground and in space

The use of single-mode optical fibers in telescope arrays, first proposed for a set of free-flying spacecraft, is developed and applied to more modest, shorter range projects. The basic advantage remains a considerable simplification in the control system; the main limitation is spectral range. Two proposals are described: a ground-based array of small optical telescopes supported on a radio dish, and a similar space array. The control system is almost the same in both cases, hence the ground-based array can be considered a test-bench for the space device.

Connes, P.↗
NASA NTRS1991

International manned lunar base - Beginning the 21st century in space

An evaluation is made of requirements for, and advantages in, the creation of a manned lunar base whose functions emphasize astronomical investigations. These astronomical studies would be able to capitalize on the lunar environment's ultrahigh vacuum, highly stable surface, dark and cold sky, low-G, absence of wind, isolation from terrestrial 'noise', locally usable ceramic raw materials, and large radiotelescope dish-supporting hemispherical craters. Large telescope structures would be nearly free of the gravity and wind loads that complicate their design on earth.

Smith, Harlan J.↗
NASA NTRS2018

Conceptual Ideas for Radio Telescope on the Far Side of the Moon

A radio telescope on the far-side of the Moon has tremendous advantages compared to Earth-based telescopes because it could observe the universe at wavelengths that are hitherto poorly explored by humans so far and the Moon acts as a physical shield that isolates the telescope from the radio interference and noises from Earth. This paper presents a novel concept for building a radio telescope on the far-side of the Moon. The main idea is to shape a suitable existing lunar crater (1 − 50km in diameter) on the far-side of the Moon into a spherical reflecting dish. The proposed Lunar Crater Radio Telescope (LCRT) would be able to observe the universe in the 5 − 100m wavelength band (i.e., 3 − 60MHz radio frequency band). The key innovations of this concept are: (1) LCRT would be the largest filled-aperture radio telescope in the Solar System. (2) LCRT could potentially make tremendous scientific discoveries in fields of cosmology and extrasolar planets by observing the universe in the 5−100m λ band(i.e., 3−60MHz ν band) that has been hitherto poorly explored. (3) It would require only a few robots from Earth and autonomously modify an existing lunar crater to build the LCRT; thereby significantly reducing launch weight and cost compared to all previous lunar surface telescope mission concepts. (4) Furthermore, the Earth based robots are not consumed during construction of LCRT. Therefore, they could create a network of LCRTs to (i) observe different regions of the universe, and (ii) enable lunar Very-Long-Baseline Interferometry (VLBI) astronomy. We envisage that this concept would unlock the potential for groundbreaking scientific discoveries in radio astronomy.

Rahmani, Amir↗
NASA NTRS1974

Integrated laser/radar satellite ranging and tracking system

A laser satellite ranging system that is mounted upon and integrated with a microwave tracking radar is reported. The 1-pulse/sec ruby laser transmitter is attached directly to the radar's elevation axis and radiates through a new opening in the radar's parabolic dish. The laser photomultiplier tube receiver utilizes the radar's existing 20-cm diam f/11 boresight telescope and observes through a similar symmetrically located opening in the dish. The laser system possesses separate ranging system electronics but shares the radar's timing, computer, and data handling/recording systems. The basic concept of the laser/radar is outlined together with a listing of the numerous advantages over present singular laser range-finding systems. The developmental laser hardware is described along with preliminary range-finding results and expectations.

Hoge, F. E.↗
NASA NTRS1986

Submillimeter and millimeter observations of Uranus and Neptune

Neptune and Uranus were studied at submillimeter and millimeter wavelengths for 2 yr using the UK IR telescope and the NASA IR telescope at Mauna Kea and the 12 dish at Kitt Peak, AZ. The brightness temperatures of both planets are provided at various wavelengths over the 0.35-3.3 mm interval scanned in the study. The present data, in combination with data from the 17 microns-3 mm interval scanned in the study. The present data, in combination with data from the 17 microns-3 mm interval taken during previous campaigns, are employed to model the temperature structures in the atmospheres of the two planets over the vertical range 100 mbar-8 bar. The data support the presence of active convection processes at the 1 bar level and deeper in both atmospheres. A static equilibrium however, exists between para-H2 and ortho-H2, along with a constant CH4 fraction of 2 percent. Deficiencies in the current database are detailed.

Orton, G. S.↗
NASA NTRS2012

An Update on the Mechanical and EM Performance of the Composite Dish Verification Antenna (DVA-1) for the SKA

This paper will give an overview of the unique mechanical and optical design of the DVA-1 telescope. The rim supported carbon fibre reflector surfaces are designed to be both low cost and have high performance under wind, gravity, and thermal loads. The shaped offset Gregorian optics offer low and stable side lobes along with a large area at the secondary focus for multiple feeds with no aperture blockage. Telescope performance under ideal conditions as well as performance under gravity, wind, and thermal loads will be compared directly using calculated radiation patterns for each of these operating conditions.

composite dish↗