Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temparature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Unusual Al-Si ordering in calcic scapolite, Me{sub 79.6} with increasing temparature.

A scapolite sample, Me{sub 79.6}, from Slyudyanka, Siberia, Russia, has been studied using in situ synchrotron powder X-ray diffraction (XRD) and Rietveld structure refinements on heating from 26 to 900 C and on cooling to about 300 C. The structure was modeled and refined in space group I4/m. An accurate room-temperature structure was also obtained by using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data and Rietveld structure refinement. From HRPXRD, the cell parameters are a = 12.16711(2), c = 7.575466(5) {angstrom}, and V = 1121.461(3) {angstrom}{sup 3}; <T1-O> and <T2-O> are 1.643(1) and 1.672(1), respectively, so the T1 (Al{sub 0.25}Si{sub 0.75}) and T2 (Al{sub 0.46}Si{sub 0.54}) sites are partially ordered at room temperature. On heating, the <T-O> distances indicate that the T1 and T2 sites become more Si- and Al-rich, respectively, and therefore, ordering increases unusually with increasing temperature. This increase in Al-Si ordering occurs from 892 to 900 C. At 900 C, the T1 site becomes fully ordered with only Si atoms, while the T2 site contains Al{sub 0.51}Si{sub 0.49} and therefore, is fully disordered. On cooling, the sample does not fully revert back to the original partially ordered state. At 300 C, all the cell parameters are smaller because of the increased Al-Si ordering that is quenched in.

43 PARTICLE ACCELERATORS↗

Thermomechanical testing techniques for high-temparature composites: TMF behavior of SiC(SCS-6)/Ti-15-3

Thermomechanical testing techniques recently developed for monolithic structural alloys were successfully extended to continuous fiber reinforced composite materials in plate form. The success of this adaptation was verified on a model metal matrix composite (MMC) material, namely SiC(SCS-6)/Ti-15V-3Cr-3Al-3Sn. Effects of heating system type and specimen preparation are also addressed. Cyclic lives determined under full thermo-mechanical conditions were shown to be significantly reduced from those obtained under comparable isothermal and in-phase bi-thermal conditions. Fractography and metallography from specimens subjected to isothermal, out-of-phase and in-phase conditions reveal distinct differences in damage-failure modes. Isothermal metallography revealed extensive matrix cracking associated with fiber damage throughout the entire cross-section of the specimen. Out-of-phase metallography revealed extensive matrix damage associated with minimal (if any) fiber cracking. However, the damage was located exclusively at surface and near-surface locations. In-phase conditions produced extensive fiber cracking throughout the entire cross-section, associated with minimal (if any) matrix damage.

Castelli, Michael G.↗

Evaporation and Solar Irradiance as Regulators of Sea Surface Temparature in Annual and Interrannual Changes

After numerical studies showed that global climate is sensitive to small changes in sea surface temperature (Ts), considerabel effort has been devoted to examine the role of surface fluxes in changing upper ocean heat balance and Ts, particularly in the tropical Pacific where interannual signals, such as El Nino Southern Oscillation (ENSO), have major economic and ecological impacts.

El Nino↗

Thermoelectric properties of Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} single crystals with magnetic impurities

Temparature dependence of Seebeck coefficients S, electrical conductivity, heat conductivity k and dimensionless thermoelectric figure of merit ZT of p-Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and n-Bi{sub 2}Se{sub 3}-doped by Fe or Cr were carried out in the temperature interval 7 150 K. - Graphical abstract: Temparature dependence of Seebeck coefficients S, electrical conductivity {sigma}, heat conductivity k and dimensionless thermoelectric figure of merit ZT of p-Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and n-Bi{sub 2}Se{sub 3} doped by Fe or Cr were measured in the temperature interval 7 150 K up to ZT=0.4 as shown in figure. Highlights: Black-Right-Pointing-Pointer Fe and Cr act as donors in Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3.} Black-Right-Pointing-Pointer The Seebeck coefficient increases in p-Bi{sub 2-x}Fe{sub x}Te{sub 3} and Sb{sub 2-x}Cr{sub x}Te{sub 3}. Black-Right-Pointing-Pointer Dimensionless figure of merit ZT increased up to 0.4 in Cr-doped Sb{sub 2}Te{sub 3} at T=300 K.

36 MATERIALS SCIENCE↗

Ion-Molecule Association in Acrylonitrile

Acrylonitrile (propernenitrile or vinyl cyanide) polymerizes readily via a radical mechanism in solution at room temparature. The propensity to polymerize is sufficiently strong that it is usual to add a radical scavenger to the solution to prevent polymerization when oxygen (an inhibitor) is removed. Polymerization of acrylonitrile is also know to occur via nucleophilic addition of an anion by a michael-type reaction.

Ion-Molecule Acrylonitrile↗

Effect of Heat Rejection Conditions on Cryocooler Operational Stability

It is well known that cryocooler thermal efficiency is a strong function of heat rejection temperature, roughly following the dependency described by carnot. An equally important and generally overlooked implication of cryocooler heat-rejection thermodynamics is the effect of the heat rejection temparature control mode on cyrocooler performance and operational stability.

Cryocooler↗

Instrument Performance of Airs

AIRS, the Atmospheric Infrared Sounder on the Earth Observing System (EOS) PM spacecraft, is an infrared radiometer which covers the 3.7-15.4 micron spectral range with spectral resolving power better than 1000.

infrared spectrometer remote sensing Earth observi↗