Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tennessee forests”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Modeling directional thermal radiance from a forest canopy

The thermal vegetation canopy radiance model of Smith et al. (1981) is extended to account for the geometrically rough structure of a forest canopy. Fourier series expansion of a canopy height profile is used to calculate improved view facts which partially account for directional variations in canopy thermal radiance transfers. Predictions from the Smith model and the modified model are compared with experimental data obtained over a deciduous forest site in Tennessee. The results show that thermal radiance from a forest canopy depends on sensor viewing angle, solar position, and the degree of geometric roughness of the canopy surface. The maximum off-nadir angle variation in the original model was 1.6 deg C, compared with 4.4 C for the modified model.

Mcguire, M. J.↗

Water and acid soluble trace metals in atmospheric particles

Continental aerosols are collected above a deciduous forest in eastern Tennessee and subjected to selective extractions to determine the water-soluble and acid-leachable concentrations of Cd, Mn, Pb, and Zn. The combined contributions of these metals to the total aerosol mass is 0.5 percent, with approximately 70 percent of this attributable to Pb alone. A substantial fraction (approximately 50 percent or more) of the acid-leachable metals is soluble in distilled water. In general, this water-soluble fraction increases with decreasing particle size and with increasing frequency of atmospheric water vapor saturation during the sampling period. The pattern of relative solubilities (Zn being greater than Mn, which is approximately equal to Cd, which is greater than Pb) is found to be similar to the general order of the thermodynamic solubilities of the most probable salts of these elements in continental aerosols with mixed fossil fuel and soil sources.

Lindberg, S. E.↗

Information extraction from thematic mapper data

The improvements introduced in spectral, spatial, and ratiometric capabilities through installation of the thematic mapper (TM) on the Landsat-4 spacecraft are described. The TM optical sensors scan in the visible (0.45-0.52, 0.52-0.60, and 0.63-0.69 micron), near-IR (0.76-0.90 micron), middle-IR (1.55-1.75 micron), and thermal IR (10.4-12.5 microns). The reflectances of vegetation and the differences in chlorophyll absorption by various plants are discerned more accurately than with the MSS, while the effects of land surface obscuration by water vapor are reduced. The blue-green band upgrades water measurements for bathymetry, reef, and atoll mapping, and the middle-IR increases sensitivity to leaf water content. The field-of-view is a 30 x 30 m square, one-fifth that of the MSS. Results from sample surveys of forested wetlands in Tennessee and agricultural land use patterns are presented.

Tilton, E. L., III↗

Remote sensing application to regional activities

Two agencies within the State of Tennessee were identified whereby the transfer of aerospace technology, namely remote sensing, could be applied to their stated problem areas. Their stated problem areas are wetland and land classification and strip mining studies. In both studies, LANDSAT data was analyzed with the UTSI video-input analog/digital automatic analysis and classification facility. In the West Tennessee area three land-use classifications could be distinguished; cropland, wetland, and forest. In the East Tennessee study area, measurements were submitted to statistical tests which verified the significant differences due to natural terrain, stripped areas, various stages of reclamation, water, etc. Classifications for both studies were output in the form of maps of symbols and varying shades of gray.

Shahrokhi, F.↗

Geographic analysis of landscape change from ERTS-1 imagery

The author has identified the following significant results. Data from low altitude flights and ground truth observations confirm the existence of significant strip mining activity at the Cumberland Plateau, Tennessee Test Site. A map (1:120,000) depicting landscape changes associated with strip mining on the Cumberland Plateau has been completed. The map was prepared from NASA generated RB-57 imagery for April 1972 and ERTS imagery for October 1972. A second map shows the generalized forest cover for the state of Tennessee. The data were derived entirely from five ERTS-1 images and reduced to an original map scale of 1:2.4 million. The most significant discovery concerns the detection, identification, and mapping of plowed fields in northern Alabama, northern Georgia, and southeastern Tennessee. In an April ERTS observation, plowed ground and bare soil surfaces were easily detected and mapped from MSS Band 5.

Rehder, J. B.↗

The uses of ERTS-1 imagery in the analysis of landscape change

The author has identified the following significant results. The analysis of strip mining from ERTS-1 data has resulted in the mapping of landscape changes for the Cumberland Plateau Test Site. Several mapping experiments utilizing ERTS-1 data have been established for the mapping of state-wide land use regions. The first incorporates 12 frames of ERTS-1 imagery for the generalized thematic mapping of forest cover for the state of Tennessee. In another mapping effort, 14 ERTS-1 images have been analyzed for plowed ground signatures to produce a map of agricultural regions for Tennessee, Kentucky, and the northern portions of Mississippi and Alabama. Generalized urban land use categories and transportation networks have been determined from ERTS-1 imagery for the Knoxville Test Site. Finally, through the analysis of ERTS-1 imagery, short-lived phenomena such as the 1973 spring floods on the Mississippi River in western Tennessee, have been detected, monitored, and mapped.

Rehder, J. B.↗

Image variance and spatial structure in remotely sensed scenes

Digital images derived by scanning air photos and through acquiring aircraft and spcecraft scanner data were studied. Results show that spatial structure in scenes can be measured and logically related to texture and image variance. Imagery data were used of a South Dakota forest; a housing development in Canoga Park, California; an agricltural area in Mississppi, Louisiana, Kentucky, and Tennessee; the city of Washington, D.C.; and the Klamath National Forest. Local variance, measured as the average standard deviation of brightness values within a three-by-three moving window, reaches a peak at a resolution cell size about two-thirds to three-fourths the size of the objects within the scene. If objects are smaller than the resolution cell size of the image, this peak does not occur and local variance simply decreases with increasing resolution as spatial averaging occurs. Variograms can also reveal the size, shape, and density of objects in the scene.

Woodcock, C. E.↗

Mississippi Embayment Water Resources: Utilizing NASA Earth Observations to Understand Groundwater Recharge in the Mississippi Regional Aquifer System

The Memphis Sand Aquifer (MSA) is located in the Mississippi Embayment which extends 250,000 square kilometers across nine states. Groundwater recharge factors that influence the narrow recharge zone of the MSA include precipitation, potential evapotranspiration, and landcover changes. The unsustainable water practices and increasing landcover change from urban development in the MSA's narrow recharge zone threaten the aquifer’s groundwater storage. In partnership with Protect Our Aquifer, the team used data from Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Integrated Multi-Satellite Retrievals for Global Precipitation Measurement (GPM IMERG), National Land Cover Dataset (NLCD), and Gravity Recovery and Climate Experiment (GRACE). These datasets included annually-averaged precipitation, evapotranspiration, potential evapotranspiration, biannual landcover change, and monthly total water storage which were used to create groundwater recharge factors maps and timeseries. The evaporative stress index map, water balance map, and landcover change maps were used to identify thriving areas. The team found precipitation did not express a strong linear trend and showed high precipitation years in 2017 and 2018, and a drought year in 2011. The potential evapotranspiration showed a weak negative linear trend. The landcover change showed shifts in forested areas and urban development. The team identified four thriving areas in the western side of Tennessee that successfully contribute to aquifer recharge due to increased forest area, sufficient water use, low changes in total water storage, and lateral positioning to streams. These end products allowed our partners to make informed decisions about areas that are thriving in the Mississippi Embayment recharge zone for conservation efforts of the aquifer.

Lauren Mahoney↗

An initial analysis of LANDSAT 4 Thematic Mapper data for the classification of agricultural, forested wetland, and urban land covers

An initial analysis of LANDSAT 4 thematic mapper (TM) data for the delineation and classification of agricultural, forested wetland, and urban land covers was conducted. A study area in Poinsett County, Arkansas was used to evaluate a classification of agricultural lands derived from multitemporal LANDSAT multispectral scanner (MSS) data in comparison with a classification of TM data for the same area. Data over Reelfoot Lake in northwestern Tennessee were utilized to evaluate the TM for delineating forested wetland species. A classification of the study area was assessed for accuracy in discriminating five forested wetland categories. Finally, the TM data were used to identify urban features within a small city. A computer generated classification of Union City, Tennessee was analyzed for accuracy in delineating urban land covers. An evaluation of digitally enhanced TM data using principal components analysis to facilitate photointerpretation of urban features was also performed.

Quattrochi, D. A.↗

Estimating forest productivity with Thematic Mapper and biogeographical data

Spectral data from the Landsat Thematic Mapper (TM) on three forest exosystems (the southern Illinois, the Great Smoky Mountains regions in Tennessee and North Carolina, and the central Adirondack Mountains in New York) were used in conjunction with ground-collected measures of forest productivity and such information as the area's slope, aspect, elevation, and soil and vegetation types, to develop models of regional forest productivity. It is shown that the models developed may be used to estimate the productivity of a region with a high degree of confidence, but that the reliability of single-pixel estimates is poor. The characteristics of a given ecosystem determine which spectral values are most closely related to forest productivity. Thus, mid-IR, NIR, and visible bands are most significant in Illinois and New York, while the thermal band is relatively more important in the Smokies.

Cook, Elizabeth A.↗

An Initial Analysis of LANDSAT-4 Thematic Mapper Data for the Discrimination of Agricultural, Forested Wetlands, and Urban Land Cover

The capabilities of TM data for discriminating land covers within three particular cultural and ecological realms was assessed. The agricultural investigation in Poinsett County, Arkansas illustrates that TM data can successfully be used to discriminate a variety of crop cover types within the study area. The single-date TM classification produced results that were significantly better than those developed from multitemporal MSS data. For the Reelfoot Lake area of Tennessee TM data, processed using unsupervised signature development techniques, produced a detailed classification of forested wetlands with excellent accuracy. Even in a small city of approximately 15,000 people (Union City, Tennessee). TM data can successfully be used to spectrally distinguish specific urban classes. Furthermore, the principal components analysis evaluation of the data shows that through photointerpretation, it is possible to distinguish individual buildings and roof responses with the TM.

Quattrochi, D. A.↗

An Initial Analysis of LANDSAT-4 Thematic Mapper Data for the Discrimination of Agricultural, Forested Wetland, and Urban Land Covers

An initial analysis of LANDSAT 4 Thematic Mapper (TM) data for the discrimination of agricultural, forested wetland, and urban land covers is conducted using a scene of data collected over Arkansas and Tennessee. A classification of agricultural lands derived from multitemporal LANDSAT Multispectral Scanner (MSS) data is compared with a classification of TM data for the same area. Results from this comparative analysis show that the multitemporal MSS classification produced an overall accuracy of 80.91% while the TM classification yields an overall classification accuracy of 97.06% correct.

Quattrochi, D. A.↗

A Study of Feature Extraction Using Divergence Analysis of Texture Features

An empirical study of texture analysis for feature extraction and classification of high spatial resolution remotely sensed imagery (10 meters) is presented in terms of specific land cover types. The principal method examined is the use of spatial gray tone dependence (SGTD). The SGTD method reduces the gray levels within a moving window into a two-dimensional spatial gray tone dependence matrix which can be interpreted as a probability matrix of gray tone pairs. Haralick et al (1973) used a number of information theory measures to extract texture features from these matrices, including angular second moment (inertia), correlation, entropy, homogeneity, and energy. The derivation of the SGTD matrix is a function of: (1) the number of gray tones in an image; (2) the angle along which the frequency of SGTD is calculated; (3) the size of the moving window; and (4) the distance between gray tone pairs. The first three parameters were varied and tested on a 10 meter resolution panchromatic image of Maryville, Tennessee using the five SGTD measures. A transformed divergence measure was used to determine the statistical separability between four land cover categories forest, new residential, old residential, and industrial for each variation in texture parameters.

Hallada, W. A.↗

Use of ERTS-1 imagery in forest inventory

The utility of ERTS-1 imagery when combined with field observations and with aircraft imagery and field observations is evaluated. Satellite imagery consisted of 9-1/2 inch black and white negatives of four multispectral scanner bands taken over Polk County, Tennessee. Aircraft imagery was obtained by a C-130 flying at 23,000 ft over the same area and provided the basis for locating ground plots for field observations. Correspondence between aircraft and satellite imagery was somewhat inaccurate due to seasonal differences in observations and lack of good photogrammetry with the data processing system used. Better correspondence was found between satellite imagery and ground observations. Ways to obtain more accurate data are discussed, and comparisons between aircraft and satellite observations are tabulated.

Rennie, J. C.↗