Search NASA⌕ Search

SEARCH · Search NASA

Results for “Test and analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

SAVY-4000 Finite-Element Drop Test Analysis

PFE Auxiliary Systems conducted drop testing on SAVY-4000 containers to evaluate structural response under 12-foot drop conditions. In support of that effort, a finite-element modeling capability was developed to simulate drop response across multiple container sizes and impact orientations. The purpose of this work was to provide a consistent analysis framework that could support interpretation of testing, compare response trends across multiple configurations, and generate quantities of interest for later comparison with experimental data. More broadly, the analysis and testing were intended to assess whether the containers continued to perform their primary function after a 12-foot drop, namely maintaining structural integrity and containment of the contents. The modeling approach combined an implicit preload analysis with an explicit drop simulation so that each drop event began from a mechanically realistic assembled condition, including compression of the silicone O-ring. Separate models were developed for 2-quart, 5-quart, 12-quart, and 10-gallon containers. The results were evaluated in terms of strain-gauge response, collar-lid gap behavior, and accumulated plastic strain. In addition, parametric studies were performed on the 2-quart container to assess sensitivity to O-ring stiffness, friction, canister thickness, geometry tolerance, and mesh density. The simulations showed that predicted drop responses depended strongly on both container size and drop orientation. Gap metrics identified cases in which the predicted collar-lid opening exceeded the nominal O-ring cross-section threshold, while plastic strain metrics identified localized regions of elevated permanent deformation. Parametric studies showed that the predicted response was especially sensitive to the assumed O-ring stiffness and contact friction, while the geometry tolerance study produced smaller changes in the cases examined. The main value of this work was that it established a repeatable modeling and simulation workflow to support drop-test implementation, evaluate effects of future configuration changes, and understand modeling assumptions that most influenced predicted response. At the current stage, the results were viewed as preliminary model predictions rather than validated predictions. The next step would be to compare drop-test data to the model so that predictive values of the workflow could be refined and used with greater confidence to assess whether the containers maintained structural integrity and containment of the contents after a 12-foot drop.

42 ENGINEERING↗
DOE OSTI2026

Image Distinguishability Analysis Testing Through Principal Components and Its Application to Hot Spot Scale Invariance

Hot spots are spatial regions of intense energy localization that govern initiation of secondary high explosives. Studies that characterize or compare simulated hot spots are frequently either qualitatively descriptive or resort to quantitative distribution functions that neglect stochastic variations and spatial correlations—effects that are also neglected in common comparison tests like the Kolmogorov–Smirnov test. To this end, we develop an image distinguishability analysis (IDA) test based on principal component (PC) analysis that makes pixel-by-pixel comparisons between small, for example, O(<10), image data sets. The IDA test makes comparisons through a generalized distance metric in the PC space and a test statistic that is derived to calculate mathematical equation-values. Here, we derive a statistical distribution and criticality criterion to determine whether images are distinguishable from established baselines. We apply the IDA test on images generated from molecular dynamics simulations of hot spots from pore collapse in TATB to assess scale invariance in the complex patterns of hot spots that form in a representative high explosive crystal. The IDA test shows that TATB hot spot spatial temperature fields and their derived temperature histograms exhibit scale-invariant features over specific intervals of shock orientation, strength, and initial pore diameter. However, the IDA test also shows that qualitatively different conclusions regarding invariance can be reached depending on whether the hot spot is treated as a spatially correlated field as opposed to a distribution function that lacks spatial information.

organic↗
DOE OSTI2021

Shock-ramp analysis test problem

Quasi-isentropic (ramp) compression is now a well-established experimental method and so are the analysis techniques to give Lagrangian sound speed, pressure, and density along the sample material's isentrope. A shock followed by ramp compression is a natural extension to investigate, for example, shock melt and refreeze on compression, or isentropes of states off the Hugoniot or principal isentrope. In practice, graded-density impactors produce initial shocks, compression by shaped laser pulses may be unable to produce a smooth pressure increase from zero, and incidental perturbations on the drive pulse may also give rise to shocks, so robust shock-ramp analysis methods will be needed. Appropriate analysis methods are needed for shock-ramp experiments, based on those for quasi-isentropic compression, and these require validation. This paper describes three different analyses of a shock-ramp test problem, including an assessment of their estimated errors. The methods tested were based on hydrodynamic characteristics or integration backward in space. All methods gave the known Lagrangian sound speed to within ~1%, and pressure and volume to within less than 2% and 1%, demonstrating that the analysis methods of isentropic compression experiments can be confidently extended to the analysis of shock and ramp compression.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Offshore Wind to Hydrogen - Modeling, Analysis, Testing and International Collaboration Work

This project explores electrolytic hydrogen production from an offshore wind turbine by: Modeling: Simulate an offshore wind turbine and generate power output profiles; Analysis: Analyze offshore conditions and determine operational modes of the stack; Testing: Perform hardware testing to evaluate dynamic characteristics; and International Collaboration Work: Share learnings and publish. Potential Outcomes: Accelerate development of an integrated, in-turbine offshore wind hydrogen system; and Support two DOE Energy Earthshots - Hydrogen and Floating Offshore Wind.

electrolyzer↗
DOE OSTI2025

Batch Test Analysis of Potential Treatment Technologies for Cyanide Groundwater Remediation

In addressing groundwater contamination, several remediation technologies are widely employed, including ion exchange (IX) resins and other adsorbents in pump-and-treat (P&T) facilities. However, many sites do not have the complex nature of the Hanford Site – a legacy production site that is part of the U.S. Department of Energy nuclear weapons complex. The Hanford Site covers an area of nearly 1,500 km 2 and has various inorganic and organic contaminants. One contaminant of concern in the Hanford Site’s Central Plateau is cyanide, particularly in the recalcitrant form of ferrocyanide. While ferrocyanide is often considered a stable complex, it can release free cyanide under certain conditions and presents challenges when testing for cyanide as a total cyanide analysis cannot differentiate between complexed and free cyanide.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Protocols for Uranium Carbon Analysis - Testing Protocol Summary

In 1998, Sigma (then MST-6) purchased and installed a new carbon-sulfur analyzer in G105 as part of a substantial refresh of our analytic capabilities. Substantial effort was undertaken to establish analysis protocols for uranium and other materials. This summary describes the following protocols we put in place as a result of these studies: sample xize (for monolithic samples—chip and powder sample may need more current study), flux/accelerant recipe, and sample cleaning process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The FastrSHWFS Project Development Motivation, Analysis, & Test Results

The recent 2020 Decadal Survey of Astronomy and Astrophysics listed habitable exoplanet imaging with future extreme adaptive optics (AO) on 30m-class telescopes as a key priority in the coming decade. However, there is a current 100x contrast gap between the best systems today and what is needed to enable this goal. Astronomical AO is a required approach to enable ground-based diffraction-limited imaging of exoplanets on future extremely large telescopes. Time lag between the end of an exposure and the application of deformable mirror commands is a major contributor to the error budget in many AO systems, and detector read time is often a large component of this lag. We present two designs for a modified Shack Hartmann wavefront sensor (SHWFS), named Focal plane Actualized Shifted Technique Realized for a SHWFS (fastrSHWFS), to reduce the time lag component. This design steers the spot pattern at the focal plane into a rectangular or linear array with a custom aspect ratio, reducing readout time. The mask with focus yields aberrated results while the mask with tip/tilt only yields some defined spots. This essay outlines the current SHWFS concept, our fastrSHWFS theoretical solution to addressing time lag, reflection and quality analysis of printed mask designs, and results from testing both masks on the High Contrast Testbed at Lawrence Livermore National Lab. This work follows the test of a previous fastrSHWFS design.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Advanced wind turbine control development using field test analysis for generator overspeed mitigation

Abstract Turbulent and gusty wind conditions can cause generator overspeed peaks to exceed a threshold that then lead to wind turbine shutdowns, which then decrease the energy production of the wind turbines. We derive so‐called “gust measures” that predict when generator overspeed peaks may occur. These gust measures are then used to develop advanced controllers to mitigate generator overspeed peaks so that wind turbines can operate more robustly in difficult wind conditions without exceeding generator overspeed thresholds that would lead to turbine shutdown events. The advanced controllers are demonstrated in nonlinear aeroelastic simulations using the open‐source wind turbine simulation tool OpenFAST. To increase the realism of the simulations, they are run using field‐replicated wind conditions and a wind turbine model based on data from an experimental field campaign on a downscaled demonstrator of a novel extreme‐scale, two‐bladed, downwind rotor design.

17 WIND ENERGY↗
DOE OSTI2022

Controlled Pyroshock Transients Can Be Used To Better Match Operational Shock Transients and Improve Shock Analysis and Testing

SRS analysis and testing to SRS is known to be conservative since SRS is generated from maxi-max shock transient data, maximum peaks are assumed to occur for each mode simultaneously, and the structural dynamics are not accounted for between the shock source and the test article. Knowing the structural dynamics of a shock test setup it is possible to subscribe a force shock transient applied at a particular strike location and direction to achieve a desired shock transient at a test reference accelerometer. The SRS at this test accelerometer reference location can be used to compare to the reference SRS, but the key reference is the shock transient not the SRS, which should lead to more realistic shock testing that better matches operational shock transient data and reduces artificial test failures that don’t occur in operational usage. The desired test shock transient should match operational shock transients. As such, the test shock transient should look similar to the operational shock transient and have similar positive and negative peaks, the same shape, and the same duration. Many shock transients can be created that satisfy an SRS, but better control of these shock transient parameters is needed to better match operational shock transients so that more realistic and less conservative shock testing can be performed. Three different shock transients are presented that satisfy a given SRS and the results are compared for an electronic board (test article) attached to a circular shock resonance test plate.

SRS, shock transient, frequency domain, FRF↗
DOE OSTI2025

Modal Analysis and Testing of a Cantilever Beam: Results and Guide

This report discusses modal analysis and testing of a cantilever beam including an introduction to modal testing, simulation, analysis, and a comparison of results. An accompanying presentation can be found from the LLNL CASIS website. Modal testing and analysis are essential for characterizing the response of a structure during vibration environments. Determining natural frequencies and mode shapes helps determine whether resonances will be reached during operations and if so, how the structure will respond and how the response can be tuned. The goal of this work is to convey the basics of modal testing and analysis through a simple project. This can be applied later to more complex, applicable structures. This includes a variety of work including data collection, finite element analysis and data processing. For this project a cantilever beam was chosen because it is a simple, well-characterized structure.

42 ENGINEERING↗
DOE OSTI2022

2022 Los Alamos National Laboratory Test and Analysis Abstracts

The abstracts included in this document are: Responsiveness, Modernization, and Radiography Test at the Centrifuge Test Facility; LANL Hostile Blast Testing Capability Development; Digital Image Correlation Measurement of B61 Center Case Fragmentation Test; and Collaborative Analysis Testing Techniques (CATT) Phase 1.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Project No. 5: Evaluating Dredged Materials for Energy Storage Applications with Economic and Carbon Benefits (CRADA Final Report)

The New York Power Authority (NYPA) is committed to supporting the Climate Leadership and Community Protection Act (CLCPA) through its VISION2030 strategic plan. As a clean energy provider, NYPA is seeking to demonstrate leadership in every aspect of its business by taking a comprehensive approach to sustainability management and integrating sustainability principles into day-to-day decision-making. This effort includes planning for climate resilience through projects that mitigate climate risk in our operations and prioritize climate opportunities in our investments. Canal Corporation, a subsidiary of NYPA, is charged with maintaining minimum water depths for navigation in the Cayuga-Seneca, Champlain, Erie and Oswego Canals. In order to do so, an average volume of 280,000 cubic yards of sediment is dredged annually and held in Upland Disposal Sites (UDS) permitted by the New York Department of Environmental Conservation (NYSDEC). The required on-land storage at UDSes are nearing capacity, and disposal opportunities are costly, both economically and environmentally. Novel energy storage technology developed by NREL provides an opportunity for meeting NYPA's need to find reuse options for dredged materials and commitment to providing clean reliable energy. This would also support NYPA's goal of developing 300 MW of utility scale storage and enabling 150 MW of distributed storage by 2030. NREL will consult NYPA on the environmental and economic impact of reusing dredged materials as useful commodities such as energy storage media, construction sand or industrial uses. Test and material characterization methods will be based on current NREL storage material characterization approaches. NREL worked with NYPA on sample preparation, material testing, test results analysis. Test and material characterization methods were based on current NREL storage material characterization approaches. The team analyzed the environmental and economic impact of reusing dredged materials as useful commodities such as energy storage media, construction sand or industrial uses. The test and analysis works have achieved the project goal in characterizing NYPA dredging materials and verifying their various uses including construction sand and thermal energy storage media. Uses of dredging materials as useful materials will bring economic and environmental benefits and avoid disposal costs.

25 ENERGY STORAGE↗