Search NASA⌕ Search

SEARCH · Search NASA

Results for “ThO 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Primary radiation damage on displacement cascades in UO 2 , ThO 2 and (U 0.5 Th 0.5 )O 2

Primary radiation damage in UO 2 , ThO 2 and (U 0.5 Th 0.5 )O 2 has been investigated as function of temperature (300 to 1500 K) using classical molecular dynamics (MD) simulations. Displacement cascades of 5 keV are used for defect production. The number of defects produced from the cascade events in UO 2 is higher than that in ThO 2 at all temperatures. Our results indicate that the defect production in (U 0.5 Th 0.5 )O 2 is different from that in the pure oxides. The number of residual defects in the mixed oxide fuel is considerably higher than in UO 2 or ThO 2 . In all three systems studied, the fraction of anion defects is much higher than that of cations, in line with higher defect energies of the U sublattice compared to the O sublattice. It is also reported that for increasing temperature peak damage increases, while residual damage decreases. Furthermore, this is indicative of the greater recombination of defects due to enhanced mobility at high temperatures. Overall, all systems studied exhibit clustering in the residual damage with interstitial clusters tending to be smaller than voids.

36 MATERIALS SCIENCE↗

Development of Xe and Kr empirical potentials for CeO 2 , ThO 2 , UO 2 and PuO 2 , combining DFT with high temperature MD

In this study, the development of embedded atom method (EAM) many-body potentials for actinide oxides and associated mixed oxide (MOX) systems has motivated the development of a complementary parameter set for gas-actinide and gas-oxygen interactions. A comprehensive set of density functional theory (DFT) calculations were used to study Xe and Kr incorporation at a number of sites in CeO 2 , ThO 2 , UO 2 and PuO 2 . These structures were used to fit a potential, which was used to generate molecular dynamics (MD) configurations incorporating Xe and Kr at 300 K, 1500 K, 3000 K and 5000 K. Subsequent matching to the forces predicted by DFT for these MD configurations was used to refine the potential set. This fitting approach ensured weighted fitting to configurations that are thermodynamically significant over a broad temperature range, while avoiding computationally expensive DFT-MD calculations. The resultant gas potentials were validated against DFT trapping energies and are suitable for simulating combinations of Xe and Kr in solid solutions of CeO 2 , ThO 2 , UO 2 and PuO 2 , providing a powerful tool for the atomistic simulation of conventional nuclear reactor fuel UO 2 as well as advanced MOX fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High temperature mechanical properties of fluorite crystal structured materials (CeO 2 , ThO 2 , and UO 2 ) and advanced accident tolerant fuels (U 3 Si 2 , UN, and UB 2 )

The mechanical interaction between the fuel and cladding that occurs during operation of a nuclear reactor is important to understand as it can lead to cladding failures and release of radioactive material into the coolant. Additionally, in order to develop better models of the pellet-clad mechanical interactions, the mechanical properties of the fuel at relevant operating temperatures, like the elastic moduli, are needed for current and advanced accident tolerant fuels (ATFs). In this work, elevated temperature nanoindentation and resonant ultrasound spectroscopy were used to measure the moduli and hardness of several fluorite materials (CeO 2 , ThO 2 , UO 2 ) and several ATF candidates (ATF) (U 3 Si 2 , UN, UB 2 ). In addition, a comparison of the two techniques was performed in this study to independently validate the mechanical properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Defect accumulation in swift heavy ion-irradiated CeO 2 and ThO 2

Here, neutron total scattering was used to investigate defect accumulation mechanisms in CeO 2 and ThO 2 irradiated with 2.2 GeV Au ions. Pair distribution function (PDF) analysis was applied to characterize the local structural evolution and irradiation-induced defects as a function of irradiation fluence. CeO 2 exhibits a greater amount of disorder than ThO 2 under the same irradiation conditions. The local structures of the two materials evolve differently as a function of ion fluence, even if similar defects are produced. The PDF analysis indicates that oxygen dimer and/or peroxide defects with distances of ~1.45 Å are formed in CeO 2 , while irradiation-induced defects in ThO 2 result in a change in the mean O–Th–O bond angle and a distortion of local ThO 8 polyhedra. Understanding how bound oxygen defects, such as peroxide, affect bulk oxygen transport in CeO 2 will aid in better predicting and improving properties of fluorite structure materials for fast ion conductor applications.

36 MATERIALS SCIENCE↗

Simulation of radiation driven fission gas diffusion in UO 2 , ThO 2 and PuO 2

Below 1000 K it is thought that fission gas diffusion in nuclear fuel during irradiation occurs through atomic mixing due to radiation damage. Here we present a molecular dynamics (MD) study of Xe, Kr, Th, U, Pu and O diffusion due to irradiation. It is concluded that the ballistic phase does not sufficiently account for the experimentally observed diffusion. Thermal spike simulations are used to confirm that electronic stopping remedies the discrepancy with experiment and the predicted diffusivities lie within the scatter of the experimental data. Here, our results predict that the diffusion coefficients are ordered such that D* 0 > D* Kr > D* Xe > D* U . For all species >98.5% of diffusivity is accounted for by electronic stopping. Fission gas diffusivity was not predicted to vary significantly between ThO 2 , UO 2 and PuO 2 , indicating that this process would not change greatly for mixed oxide fuels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of irradiation temperature on the response of CeO2, ThO2, and UO2 to highly ionizing radiation

Microcrystalline CeO 2 , ThO 2 , and UO 2 were irradiated with 198 MeV 132 Xe ions to the same fluence at temperatures ranging from 25°C to 700°C then characterized by synchrotron X-ray diffraction and X-ray absorption spectroscopy. All samples retain crystallinity and their nominal fluorite-type phase at a fluence of 1.5x10 13 ions/cm 2 . Both CeO 2 and ThO 2 display defect-induced unit cell expansion after irradiation at room temperature (~0.15% and ~0.10%, respectively), yet as irradiation temperature increases, the maximum swelling produced decreases to ~0.02%. Alternatively, UO 2 shows an initial contraction in unit cell parameter (approximately -0.05%), for room temperature irradiation most likely related to irradiation-enhanced annealing or irradiation-induced oxidation. At higher temperatures (above 200°C), UO 2 begins to swell, surpassing its unit cell parameter prior to irradiation (~0.05%), an effect which could be attributed to minor reduction in uranium oxidation state in vacuum. However, while CeO 2 irradiated at room temperature undergoes partial reduction, both UO 2 and ThO 2 exhibit no measurable change in cation oxidation state as evidenced by X-ray absorption spectroscopy. All samples display a decrease in irradiation-induced heterogeneous microstrain as a function of increasing irradiation temperature.

36 MATERIALS SCIENCE↗

Mechanical and electronic properties of CeO{sub 2}, ThO{sub 2}, and (Ce,Th)O{sub 2} alloys

A systematic first-principle study is conducted to calculate bulk modulus, elastic constants, phonon-dispersion curves, and electronic structures of CeO{sub 2}, ThO{sub 2}, and their ordered binary alloys Ce{sub x}Th{sub 8-x}O{sub 16} with x=1, 2, 4, 6, and 7 using local-density approximation (LDA), generalized gradient approximation (GGA), LDA+U, and GGA+U approaches. In order to get accurate results for these type of systems including f electrons [Ce(4f) and Th(5f)] we optimized the U parameter for use in LDA+U and GGA+U approaches. The computed structural, mechanical, and electronic properties of CeO{sub 2} and ThO{sub 2} are observed to display strong correlation with experimental data. In particular, the best agreement with experiment is obtained within the LDA+U in which on-site Coulomb interaction parameter (U{sub eff}) for Ce and Th are taken as 6.0 and 5.0 eV. To check the stability of alloy forms, phonon-dispersion curves of Ce{sub x}Th{sub 8-x}O{sub 16} with x=2, 4, and 6 are computed. In all concentrations, mechanical stability conditions are satisfied for alloys. Furthermore, we observed no negative phonon branches in the phonon spectrum of alloys. Our calculations indicated a strong effect of concentration, x, on the electronic structure of Ce{sub x}Th{sub 8-x}O{sub 16}.

36 MATERIALS SCIENCE↗

LWR fuel assembly designs for the transmutation of LWR Spent Fuel TRU with FCM and UO{sub 2}-ThO{sub 2} Fuels

In this paper, transmutation of transuranic (TRU) nuclides from LWR spent fuels is studied by using LWR fuel assemblies which consist of UO{sub 2}-ThO{sub 2} fuel pins and FCM (Fully Ceramic Microencapsulated) fuel pins. TRU from LWR spent fuel is loaded in the kernels of the TRISO particle fuels of FCM fuel pins. In the FCM fuel pins, the TRISO particle fuels are distributed in SiC matrix having high thermal conductivity. The loading patterns of fuel pins and the fuel compositions are searched to have high transmutation rate and feasible neutronic parameters including pin power peaking, temperature reactivity coefficients, and cycle length. All studies are done only in fuel assembly calculation level. The results show that our fuel assembly designs have good transmutation performances without multi-recycling and without degradation of the safety-related neutronic parameters. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Activation of H 2 O by ThO 2 – Experimental and Computational Studies

Here, a synergetic study that utilized anion photoelectron spectroscopy and high-level abinitio calculations has explored the activation of H 2 O molecules by ThO 2 – molecular anions. Both experiment and theory found conclusive evidence for said activation. In the experiments, this appeared as a tell-tale directional shift in the spectral profile of the anionic complex that ruled out physisorption,i.e., ThO 2 – (H 2 O), and implied chemisorption. In the computations, good agreement was found between the calculated and measured vertical detachment energies, and the atomic connectivity (the structure) of the resulting anionic complex was found to be [OTh(OH) 2 ] – .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ defect annealing of swift heavy ion irradiated CeO 2 and ThO 2 using synchrotron X-ray diffraction and a hydrothermal diamond anvil cell

Hydrothermal diamond anvil cells (HDACs) provide facile means for coupling synchrotron Xray techniques with pressure up to 10 GPa and temperature up to 1300 K. This manuscript reports on an application of the HDAC as an ambient-pressure sample environment for performing in situ defect annealing and thermal expansion studies of swift heavy ion irradiated CeO 2 and ThO 2 using synchrotron X-ray diffraction. The advantages of the in situ HDAC technique over conventional annealing methods include: rapid temperature ramping and quench times, high-resolution measurement capability, simultaneous annealing of multiple samples, and prolonged temperature- and apparatus stability at high temperatures. Isochronal annealing between 300 K and 1100 K revealed 2-stage and 1-stage defect recovery processes for irradiated CeO 2 and ThO 2 , respectively; indicating that the morphology of the defects produced by swift heavy ion irradiation of these two materials differs significantly. These results suggest that electronic configuration plays a major role in both the radiation-induced defect production and high temperature defect recovery mechanisms of CeO 2 and ThO 2 .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Reliable Potential Energy Surfaces for the Reactions of H 2 O with ThO 2 , PaO 2 + , UO 2 2+ , and UO 2 +

The potential energy surfaces for the reactions of H 2 O with ThO 2 , PaO 2 + , UO 2 2+ , and UO 2 + have been calculated at the coupled cluster CCSD(T) level extrapolated to the complete basis set limit with additional corrections including scalar relativistic and spin-orbit. The reactions proceed by the formation of an initial Lewis acid-base adduct (H 2 O)AnO 2 0/+/2+ followed by a proton transfer to generate the dihydroxide AnO(OH) 2 0/+/2+ . The results are in excellent agreement with mass spectrometry experiments and prior calculations of hydrolysis reactions of the group 4 transition metal dioxides MO 2 . The differences in the energies of the stationary points on the potential energy surface are explained in terms of the charges on the system and the populations on the metal center. The use of an improved starting point for the coupled cluster CCSD(T) calculations based on density functional theory with the PW91 exchange-correlation functional or Brueckner orbitals is described. The importance of including second-order spin-orbit corrections for closed-shell molecules is also described. These improvements in the calculations are then correlated with the 5f populations on the actinide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles Computational Study of Defect Clustering in Solid Solutions of ThO 2 with Trivalent Oxides

The energetics of mixing and defect ordering in solid solutions of fluorite-structured ThO 2 with oxides of trivalent cations (Sc, In, Y, Nd, and La) are investigated by electronic density-functional theory (DFT). Through DFT calculations of structures enumerated by lattice-algebra techniques, we identify the lowest energy patterns for defect clustering for four separate dopant concentrations. The most stable structures are characterized by a repulsive interaction between nearest-neighbor vacancies on the oxygen sublattice. The enthalpies of formation with respect to constituent oxides are positive for all dopants considered, and show a tendency to decrease in magnitude as the size and electronegativity of the trivalent dopant decrease. Due to the small positive formation enthalpies and low oxygen-vacancy binding energy with La dopants, La O 3 -ThO 2 solid solutions are predicted to have relatively high ionic conductivities relative to those for the other aliovalent dopants considered. Our results are compared with those for the more widely studied ZrO 2 and CeO{sub 2} fluorite-structured solid solutions with trivalent cations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanism and Energetics of the Hydrolysis of Th + To Form Th(OD) 3 + : Guided Ion Beam and Theoretical Studies of ThO + , ThO 2 + , and OThOD + Reacting with D 2 O

The kinetic energy dependences of the reactions of ThO + , ThO 2 + , and OThOD + with D 2 O, ThO 2 + with D 2 , and OThOD + with Xe were studied using guided ion beam tandem mass spectrometry. Exothermic formation of OThOD + is the dominant process observed in reactions of both ThO + and ThO 2 + with D 2 O. Minor products formed in endothermic reactions include ThO 2 + , DThO + , and ThO 2 D 2 + . OThOD + is also formed in the reaction of ThO 2 + with D 2 but in an endothermic process. Collision-induced dissociation of OThOD + with Xe leads to endothermic loss of the hydroxide ligand. OThOD + reacts further with D 2 O to form the associative complex ThO 3 D 3 + , which is long-lived before dissociating back to the reactants. The OThOD + D 2 O bond energy of the associative complex is measured to be 2.96 ± 0.05 eV by modeling the kinetic energy dependent cross section for association using a phase space theory (PST) model that rigorously conserves angular momentum. By comparison with theory, this bond energy identifies the ThO 3 D 3 + species as the trihydroxide cation, Th(OD) 3 + . From the endothermic reactions and CID of OThOD + with Xe, the OTh + -D, OTh + -O, and OTh + -OD bond dissociation energies are measured to be 2.33 ± 0.24, 4.66 ± 0.15, and 6.00 ± 0.17 eV, respectively. All four of these BDEs are experimentally determined for the first time and agree reasonably well with values calculated at the B3LYP, B3PW91, and PBE0 levels of theory with cc-pVQZ basis sets. Complete potential energy surfaces for all reactions were calculated at the B3LYP/cc-pVTZ level and elucidate the mechanisms for all processes observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Model for ThO 2 (am) Solubility in Isosaccharinate Solutions

Extensive studies on ThO 2 (am) solubility were carried out as functions of a wide range of isosaccharinate concentrations (0.0002 to 0.2 mol·kg -1 ) at fixed pH values of about 6 and 12, and varying pH (ranging from 4.5 to 12) at fixed aqueous isosaccharinate concentrations of 0.008 mol·kg -1 or 0.08 mol·kg -1 , to determine the aqueous complexes of isosaccharinate with Th(IV). The samples were equilibrated over periods ranging up to 69 days, and the data showed that, in most cases, steady-state concentrations were reached in <15 days. The data were interpreted using the SIT model, and required the inclusion of mixed hydroxy-ISA complexes of Th(IV) [Th(OH)ISA 2+ , Th(OH) 3 (ISA) - 2 , and Th(OH) 4 (ISA) 2 -2 ] with log10K0 = 12.5± 0.5, 4.4±0.5 and -3.2±0.5 for the reactions: ThO 2 (am)+ 3H + +ISA - *Th(OH)ISA 2+ + H 2 O ThO 2 (am)+ H+ +2ISA - +H2O*Th(OH) 3 (ISA) -2 and ThO 2 (am)+ 2ISA - +2H 2 O*Th(OH) 4 (ISA) 2 -2 respectively. Predictions based on these Th-ISA complexes agreed closely with the extensive experimental data developed in this study as well as the very limited (only at pH = 8.3) data from liquid-liquid extractions recently reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen K-Edge X-ray Absorption Spectra of ThO 2 and CeO 2 : Experiment, Interpretation, and Structural Effects

Experimental oxygen K-edge spectra of ThO 2 and CeO 2 are presented and interpreted based on density functional theory (DFT). The contribution of d and f orbitals to the O K-edge spectrum is identified as well-distinguished peaks, the presence of which evidences the strong hybridization of Th and Ce metal centers with O orbitals. The sensitivity of the O K-edge to both f- and d-states in the absence of a core–hole on the metal ion results in an insightful overview of the electronic structure involved in the chemical bond. In particular, the large bandwidth of the Th 5f band as compared to the Ce 4f band is observed as a set of wider and more substantial set of peaks in the O K-edge, confirming the stronger hybridization of the former with O orbitals. The peak ascribed to the 5f band of ThO 2 is found at higher energy than the 6d band, as predicted from DFT calculations on actinide dioxides. Here, to highlight the sensitivity and the potential use of the O K-edge for the characterization of ThO 2 -based systems, the sensitivity of the spectrum to structural changes such as lattice expansion and size reduction are calculated and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗