Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermal Properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Porous architecture and thermal properties of thermal barrier coatings deposited by suspension plasma spray

Besides the intrinsic low heat transfer capability of material, the thermal insulation property of thermal barrier coatings (TBCs) also relies on their microstructures. For better understanding the relationship between process parameters, porous architecture, and thermal properties of coatings, YSZ coatings were firstly manufactured by suspension plasma spray (SPS). Afterwards their total porosities were characterized by using the technique of X-ray transmission, the nano/submicro pores in those coatings were detected with Ultra-Small Angle X-ray Scattering (USAXS), and the thermal properties of coatings were measured using the laser flash method. The results indicated that: i) the porous architecture of SPS coatings can be tailored by adapting process parameters. ii) increasing total porosity is an effective means for reducing the heat transfer capability of SPS coatings. iii) nano/submicro pores have higher influence sensitivity on thermal properties than that of larger pores. Increasing the content of nano-submicro pores is therefore more effective for improving the thermal insulation property of SPS coatings. The potential of SPS technique for fabricating TBCs was discussed as well.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of polycyclosilane microstructure on thermal properties

Thermal characterization of polysilanes has focused on the influence of organic side chains, whereas little is understood about the influence of silane backbone microstructure on thermal stability, phase properties, and pyrolysis. To address this knowledge gap, we prepared three distinct polycyclosilanes: linear polymers synthesized from the cyclosilane building blocks 1,4Si 6 and 1,3Si 6 , as well as a cyclic polymer of 1,3Si 6 . Thermal properties across the temperature range 25 to 600 °C were investigated using differential scanning calromietry (DSC) and thermogravimetric analysis (TGA). We found differences between linear and cyclic materials, including a phase transition unique to the cyclic polymer and lower rates of mass loss during pyrolysis. Density functional theory (DFT) calculations provided insight into microstructure-dependent pyrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural and thermal properties of ultralow thermal conductivity Ba 3 Cu 2 Sn 3 Se 10

The thermal properties of Ba 3 Cu 2 Sn 3 Se 10 were investigated by measurement of the thermal conductivity and heat capacity. The chemical bonding in this diamagnetic material was investigated using structural data from Rietveld refinement and calculated electron localization. This quaternary chalcogenide is monoclinic (P2 1 /c), has a large unit cell with 72 atoms in the primitive cell, and a high local coordination environment. Additionally, the Debye temperature (162 K) and average speed of sound (1666 m s -1 ) are relatively low with a very small electronic contribution to the heat capacity. Ultralow thermal conductivity (0.46 W m -1 K -1 at room temperature) is attributed to the relatively weak chemical bonding and intrinsic anharmonicity, in addition to a large unit cell. This work is part of the continuing effort to explore quaternary chalcogenides with intrinsically low thermal conductivity and identify the features that result in a low thermal conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Thermal Properties of Sodium Borosilicate Glasses as a Function of Sulfur Content

SO3 additions, up to 3.0 wt%, were systematically investigated for effects on the physical properties of sodium borosilicate glass melted in air, with a sulfur-free composition of 50SiO2-10Al2O3-12B2O3-21Na2O-7CaO (wt%). Solubility measurements, using electron microscopy chemical analysis, determined the maximum loading to be ~1.5 wt% SO3. It was found that sulfur (here as sulfate) in this glass increased the glass transition temperature, thermal diffusivity, heat capacity, and thermal conductivity, and decreased the mass density. Structural analysis, performed with Raman spectroscopy, indicated that the borosilicate network polymerized with sulfur additions, presumably due to Na2O being required to charge compensate the ionic SO42- additions, thus becoming unavailable to form non-bridging oxygen in the silicate network. It is postulated that this increased crosslinking of the borosilicate backbone lead to a structure with higher dimensionality and average bond energy. This increased the mean free paths and vibration frequency of the phonons, which resulted in the observed increase in thermal properties.

Thermal properties, Borosilicate glass, Sulfur sol↗
DOE OSTI2021

Intrinsic anharmonicity and thermal properties of ultralow thermal conductivity Ba 6 Sn 6 Se 13

Ultralow thermal conductivity materials continue to be of great interest for technologically important applications such as thermal insulators and thermoelectrics. Often, such materials possess constituents with extensive dynamic disorder, or “rattlers,” or structural disorder such as metallic glasses. Nevertheless, targeted crystalline bonding order and anharmonicity can provide effective means for the scattering of the phonons in certain materials. Our combined experimental and theoretical investigation of Ba 6 Sn 6 Se 13 reveals such a material, with ultralow thermal conductivity measured over a large temperature range. Optic phonon modes hybridize with acoustic modes at relatively low energies resulting in strong acoustic-optic scattering and limited phonon lifetimes. Moreover, our investigations reveal various avoided crossings at low energies that contribute to phonon scattering. These are derived from chiral phase symmetries and may result in nontrivial topological behaviors for phonon band crossings in this chiral material. This work contributes to the ongoing research on low thermal conductivity materials and the underlying mechanisms that affect their thermal behaviors. Manipulation of these effects may provide pathways for enhancement of material properties for targeted thermal applications using similar materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural and thermal properties and the origin of the ultralow thermal conductivity in the defect stannite CuIn 2 Se 4

Phase-pure CuIn 2 Se 4 , a ternary metal chalcogenide that forms in a disordered stannite crystal structure, was synthesized to investigate the structure thermal property relationships as well as reveal the origin of the ultralow thermal conductivity this material possesses over a large temperature range. Modeling of the temperature-dependent heat capacity and thermal conductivity revealed distinctive thermal properties and large lattice anharmonicity. Electron localization function calculations highlight the asymmetric bonding inherent to CuIn 2 Se 4 , which together with lattice anharmonicity directly impacts the thermal properties. Our findings reveal the specific atomic arrangement and bonding governing the thermal properties of this ternary metal chalcogenide. Our findings underscore the specific atomic arrangement and bonding governing the thermal properties in this ternary chalcogenide. This study advances the fundamental understanding of stannites, and our findings can be applied to these and other multinary metal chalcogenides of interest for applications where low thermal conductivity is desirable.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermal Properties of the Very Low Thermal Conductivity Ternary Chalcogenide Cu 4 Bi 4 M 9 (M = S, Se)

Temperature-dependent thermal properties of phase-pure polycrystalline ternary chalcogenides Cu 4 Bi 4 S 9 and Cu 4 Bi 4 Se 9 are reported. The structure and bonding in these materials result in very low thermal conductivity values (<0.8 W m -1 K -1 at room temperature) for both materials. The lattice contribution, Debye temperatures, and Sommerfeld coefficient are obtained from low-temperature heat capacity data that also indicate very small electronic contributions to the heat capacity for these materials. This study aids in the identification of new nontoxic, earth-abundant resistive ternary chalcogenide materials with low thermal conductivity for potential thermal barrier coating and rewriteable storage applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Accelerated thermal property mapping of TRISO advanced nuclear fuel

TRistructural ISOtropic (TRISO) fuel is a leading-edge nuclear fuel form representing a departure from the more traditional nuclear fuel forms utilized in the reactor fleet of today. Rather than a monolithic fuel pellet of uranium dioxide, integral fuel forms containing TRISO fuel are composed of thousands of microencapsulated uranium-bearing fuel kernels and individually coated with multiple layers of pyrolytic carbon and silicon carbide. These multilayered ceramic coatings serve as an environmental barrier to ensure radioactive and chemically reactive fission products are contained within the reactor fuel elements, but also participate in the transfer of heat generated in the nuclear fuel to the coolant – the primary purpose of a nuclear reactor. Since traditional thermal property measurement techniques, such as laser flash analysis, would be unable to resolve the thermal properties of the individual TRISO coating layers, a simplified frequency-domain thermoreflectance technique has been developed to rapidly map the thermal properties of TRISO particles. Using this technique, the thermal properties of TRISO particles have been mapped from room temperature up to 1000 °C to examine the spatial variation and temperature-dependency of the thermal properties within each layer. Additionally, spatial-domain thermoreflectance was used to examine the anisotropy of the thermal properties for each layer at different locations within a single TRISO particle, and across multiple TRISO particles to assess the intra- and inter-particle uniformity of thermal properties, respectively. To elucidate the underlying causes for the measured variations in thermal properties, scanning electron microscopy and Raman spectroscopy were used to examine variations in microstructure and chemical bonding within the different coating layers. Results from this work are then compared with previous examinations of TRISO fuel particles and microstructurally driven mechanisms for the variations in the measured thermal properties of the different carbonaceous layers are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Theory of thermal properties of magnetic materials with unknown entropy

Theoretical approaches to study thermal properties of magnetic materials typically require accurate models of magnetic interactions in order to define the entropy. Here we introduce a complementary approach for examining thermal properties in magnetic systems where an accepted model for such interactions does not exist. In place of a specific model for magnetic interactions, the approach integrates measurements of temperature dependent magnetization of the studied material into a first principles computational scheme. The approach calculates system pressure from thermally disordered microstates that properly incorporate vibrational and spin subsystems at each temperature as well as the coupling between these subsystems. We apply the approach to calculate phonon modes and to investigate the anomalously low thermal expansion of the classical Invar alloy, Fe 0.65 Ni 0.35 . Here, the calculated phonon dispersions for Invar are in excellent agreement with measured data. The Invar thermal expansion is shown to remain small between 50 K and room temperature, consistent with the experimentally observed low thermal expansion value in this same temperature range. This anomalously small thermal expansion is directly connected to a small positive contribution from lattice thermal disorder that is nearly canceled by a large negative magnetic disorder contribution. By contrast, calculations for bcc Fe show a much larger thermal expansion, consistent with experiment, which is dominated by a large contribution from lattice thermal disorder that is reduced only slightly by a small negative contribution from that of magnetism. These findings give insights into the unusual nature of magnetism and spin-lattice coupling in Invar and Fe. In addition, they give promising preliminary support to the presented new methodology as a complementary way to investigate thermal properties of magnetic materials. The success achieved on Invar and Fe motivates future testing of the approach on other magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Morphological-informed Thermal Property Prediction in the Engineering Domain

Using first-principle, atomic scale methods to predict thermal carrier (electron and phonon) behavior at nanoscale yields highly resolved thermal properties. Density functional theory simulations can model myriad effects on the transport of phonons and electrons (e.g., phonon and electron coupling, electron correlation, defect presence, carrier scattering), and yield thermal properties for small geometric domains such as thermal and electrical conductivity, or heat capacity. While these thermal properties are accurate in atomistic and nanoscopic systems, they must be scaled up to the microstructural domain to be a useful predictor for experimental basis, as the microscale is where myriad changes and physical phenomenon occur within a material (e.g., grain boundaries, precipitate aggregations, interfaces, defect clusters). My talk will discuss the necessity of thermal property predictions for nuclear fuels applications and more. Additionally I will discuss the necessity in developing multi-physics, multi-scale methods for future applications in predictions for not only nuclear fuels, but other materials applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermal properties of HfN-MoW surrogate cermet fuel for nuclear thermal propulsion

Here, the thermal properties of MoW-HfN, a surrogate cermet for MoW-UN nuclear thermal propulsion fuel, were characterized over a wide range of elevated temperatures. Thermal diffusivity, coefficient of thermal expansion (CTE), and heat capacity were measured. Optical and scanning electron microscopy were performed to characterize the microstructure and draw structure–property correlations. The thermal diffusivity was obtained using the laser flash method. Diffusivity values ranged from about 0.18 cm 2 /s at 200°C to 0.15 cm 2 /s at 1800°C. The CTE was measured using push-rod dilatometry up to 1600°C, giving values between 6.0 and 9.0 μm/m. A scientific rationalization of the effective material properties is made using the rule-of-mixtures and other effective properties models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Roadmap for thermal property measurements of Molten Salt Reactor systems

Thermal properties of molten salts, both with and without fissile and fertile material, are fundamental to modeling and simulation that supports design, construction, operation, and accident progression evaluation of molten salt reactors. This roadmap provides guidance to the research community on the types and amounts of required data for base, or carrier, salt systems, recommends simulated burnup fuel salt compositions to evaluate, and provides a technical foundation for a focused salt property evaluation matrix. The property values generated from both computation and experimental methods are used to develop models that constitute the Molten Salt Thermal Properties Database (MSTDB). While the building blocks of MSTDB are fundamental in nature, its data facilitates constructing engineering models that allow stakeholders to investigate the behavior of specific compositions of interest and supports broader modeling and simulation of MSRs through coupling to multi-physics, multi-scale mass accountancy tools.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

3D-printing methacrylate/chitin nanowhiskers composites via stereolithography: Mechanical and thermal properties

We report on the mechanical and thermal properties of stereolithography (SLA) 3D-printed methacrylate (MA) resin reinforced by chitin nanowhiskers (CNWs). CNWs were synthesized by acid hydrolysis of crab shell chitin and nanocomposites with 0 wt%, 0.5 wt%, 1.0 wt%, and 1.5 wt% CNWs loading were prepared by slurry compounding method. The obtained CNWs (diameter = 23 ± 5 nm, length = 253 ± 100 nm, and aspect ratio = 11 ± 3) are well dispersed within the bulk of MA at 1.0 wt% loading, implying good interfacial adhesion between the nanofiller and the resin matrix possibly due to hydrogen bonding interactions. The addition of up to 1.0 wt% CNWs to neat MA enhances the tensile strength, strain at break, modulus, and maximum thermal degradation temperatures of the nanocomposites. Moreover, the incorporation of CNWs not only improves the mechanical and thermal properties, but also preserves the excellent resolution and accuracy of 3D-printed MA/CNWs nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Investigation of Thermal Properties of 2D Materials [Dissertation]

Studying the thermal conductivity of 2D materials is important due to the applications of 2D materials in fields such as thermal management, thermoelectricity, renewable energy, and sensors. As such, measurements of the thermal conductivity of these 2D materials become important to measure. Thermal conductivity is often difficult to measure for 2D materials due to their atomically thin nature and many experimental methods for doing so requiring contact with the sample, which can alter the thermal properties. A non-contact method for calculating the thermal conductivity of 2D materials supported on substrates in order to model the thermal conductivity of 2D materials for devices, is proposed and experimentally performed in this dissertation. The optothermal Raman technique is a useful non-contact diagnostic technique useful in determining the thermal conductivity of 2D materials. The optothermal Raman typically does not account for heat losses due to convection or radiation or substrate resistance, which are shown to be important factors to consider when developing an optothermal Raman model. Additionally, the calculation of the interfacial thermal conductance between the bottom surface of the sample and the top surface of the substrate, plays an important role in determining the final value of the thermal conductivity of a supported sample, and will yield differing results based on whether or not the conductance is calculated using an approach such as the Diffuse Mismatch Model (DMM) or calculated directly by varying the laser heating profile (usually done by changing the laser objective). This is shown to be the case for both graphene on Ni, graphene on Cu, and SnSe 2 on Cu. In addition to experimentally calculating the thermal conductivity of a 2D material with the optothermal Raman technique, the thermal conductivity of 2D materials can also be calculated using computational methods. The three-phonon method is a method which can be used to simulate phonon scattering processes and determine the thermal conductivity of semiconductors, wherein phonon scattering is the dominant mechanism which determines the thermal conductivity. The three-phonon method uses relaxation times for phonon scattering with other phonons, electrons, and other material system elements, such as isotopes or material defects, in order to create a single-mode relaxation time approximation (SMRTA), which is used to calculate the final value of the thermal conductivity. An important consideration when determining the thermal conductivity of a 2D material using this method is the device geometry, which is reflected in this work as the phonon-boundary scattering relaxation time. This inclusion is important along with the inclusion of phonon-electron scattering in accurately determining the thermal conductivity of a 2D material. In both the optothermal Raman experiments and the three-phonon method computations, strain is shown to have a demonstrable effect on the thermal conductivity of 2D materials. When a 1.1% strain was applied to the mechanical properties of SnSe, the three-phonon processes yielded a lower thermal conductivity than the no-strain case. For the optothermal Raman experiments, the strain induced in the Cu substrate and transferred to a single-layer graphene (SLG) sample yields a trend where the thermal conductivity of the SLG decreases with respect to strain applied. In the case where the interfacial thermal conductance was calculated directly, the conductance increased with respect to strain applied. This presents strain as a reliable and viable method for tuning the thermal properties of 2D materials for device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the effect of specimen size on the properties of fine-grain isotropic nuclear graphite for irradiation studies: Physical, electrical, thermal properties

Programs at Oak Ridge National Laboratory are investigating the effects of neutron irradiation in the High Flux Isotope Reactor (HFIR) on properties of fine-grain nuclear graphites. Specimens were irradiated in the HFIR flux trap, which required using specimens that are smaller than the sizes recommended by ASTM standards. Here, this work has investigated whether subsized specimens can be used to reliably determine the measured physical (density, elastic moduli, and electrical resistivity) and thermal properties (coefficient of thermal conductivity and thermal conductivity). The results show the specimen sizes in this investigation had a minimal influence on any of the measured properties. Even for the properties where size influenced the measured value (density and thermal conductivity), an explanation is provided, and the consequences can be accounted for in post-irradiation results. This work demonstrated that using subsized specimens for physical and thermal property measurements is suitable when necessary for fine-grain isotropic graphite.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Machine learning interatomic potential for predicting the thermal properties of uranium nitride

We present a combined computational and experimental investigation of the thermal properties of uranium nitride (UN), focusing on the development of a machine learning interatomic potential (MLIP) using the moment tensor potential framework. The MLIP was trained on density functional theory (DFT) data and validated against various quantities including energies, forces, elastic constants, phonon dispersion, and defect formation energies, achieving excellent agreement with DFT calculations, prior experimental results, and our thermal conductivity measurement. The potential was then employed in molecular dynamics simulations to predict key thermal properties such as melting point, thermal expansion, specific heat, and lattice thermal conductivity. To further assess model accuracy, we fabricated a UN sample and performed new thermal conductivity measurements representative of single-crystal properties, which showed strong agreement with the MLIP predictions. This work confirms the reliability and predictive capability of the developed potential for determining the thermal properties of UN.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Multiscale thermal properties prediction in the Multiphysics Object Oriented Simulation Environment (MOOSE) via a general Boltzmann solver [Poster]

The project objectives were: (1) Engineering-scale fuel performance modeling relies on accurate thermal properties; (2) Thermal properties are inherently multi-scale, arising from atomistic processes and interactions with a material’s microstructure; (3) Heat transport in solids via conduction occurs through transport and scattering of electrons and phonons; (4) Use the Boltzmann transport equation (BTE) to predict the macroscopic behavior of a materials system in terms of the microscopic dynamics of its heat carriers; and (5) This project establishes a new MOOSE (Multiphysics Object Oriented Simulation Environment) module, Boltzmann, dedicated to phonon and thermal electron transport.

36 MATERIALS SCIENCE↗