Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermal effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Numerical Evaluation of Effective Thermal Conductivity of PCM with Metal Foam Incorporating Buoyancy Effects for Thermal Energy Storage

The thermal energy storage (TES) system has the capability to efficiently preserve thermal energy directly derived from the energy source, minimizing any conversion losses. Especially latent heat storage offers distinct advantages, including a substantial increase in energy storage density and minimization of temperature fluctuations within the plants. However, the phase change material (PCM) employed in latent heat storage has low thermal conductivity. Consequently, various studies are being conducted to enhance heat transfer. One approach to enhance heat transfer involves utilizing metal foam to maximize the heat transfer area. However, modeling metal foam with its intricate structure is a challenging task in numerical analysis. For this reason, ongoing research focuses on simplifying the modeling of metal foam. Nevertheless, fully encompassing all the characteristics of actual metal foam proves to be a challenging task for the simplified analytical model. The objective of this paper is to interpret the simple lattice metal foam analysis model from the perspective of behavior induced by buoyancy. When comparing the analysis results of solid PCM and liquid PCM with the same thermal conductivity under changes in porosity and gravity direction, we conducted an analysis to discern the trends in effective thermal conductivity that are overestimated due to convection. In the analysis, a constant heat flux of 10 kW and a constant surface boundary condition of 350 K were applied, and a sensitivity study regarding the mesh was conducted. The results indicate that, from the perspective of gravity in the simple lattice model, the solid analysis yields an effective thermal conductivity 29-47% higher compared to the liquid analysis. Additionally, as porosity increases, there is an observed increase of 24-33% in effective thermal conductivity.

25 ENERGY STORAGE↗
DOE OSTI2022

Development of Numerical Model of Metal Foam with PCM for the Estimation of Effective Thermal Conductivity

Global warming due to climate change is a threat to humankind. Nuclear energy is one of the promising solutions to reduce fossil fuel usage. Nuclear energy can handle the base load, compensating for the volatility of renewable energy. If nuclear energy could achieve load following capability, the combination with renewable energy would be more suitable. Thermal energy storage (TES) is one of the options for enabling load following of nuclear reactors. The TES makes it possible to store surplus nuclear thermal energy and release it later as needed. In Idaho National Laboratory (INL), a new concept of latent heat TES integrated with high-temperature heat pipe has been proposed and is under development, which is called Heat pipe-Integrated Thermal Battery (HITB). HITB exchanges thermal energy between the reactor system and TES via heat pipe. The heat transferred to TES medium, made of phase change material (PCM), stores energy as sensible heat and/or latent heat. As PCM typically has poor thermal conductivity, however, various heat transfer enhancement techniques are required to achieve a rapid charging cycle. There are many techniques to enhance the heat transfer ability of TES medium such as disk, fin, and metal foam. Among them, metal foam is an appropriate option to enhance the heat transfer because it maximizes the heat transfer area through metal wicks. Metal foam is a lightweight metal structure that has a high porosity of over 0.9. The typical materials for metal foam are Aluminum, Copper, Nickel, and Silicon Carbide (SiC). Metal foam not only enhances heat transfer via conduction but also increases contact surface area. In the HITB design , the metal foam is being considered as one of the options to enhance the heat transfer of TES medium (PCM) [1]. To predict the enhanced thermal performance of TES, one should properly estimate the effective thermal conductivity of metal foam combined with PCM material or calculate heat transfer in distributed model. There are many experimental works that provides effective thermal conductivity of metal foam with various PCM [2,3]. Also, many theoretical models were developed based on the unit cell model of metal foam [4,5]. With a distributed model, on the other hand, detail heat transfer characteristics between metal foam and PCM material can be analyzed considering the geometry or buoyancy effect. However, due to the complex geometry of metal foam pores, the computational cost for three-dimensional modeling highly increases. Therefore, if metal foam structure can be modeled in simple and repetitive design, the computational cost would decrease Among the various metal foam models [2], lattice model is one of the simple and extendable design. The porosity and pores per inch (PPI) can be characterized by the size and spatial distance of lattice structure. If the three-dimensional metal foam model consists of lattice structure could properly estimate the heat transfer, which is characterized by effective thermal conductivity, it would be a good option to assess the thermal performance of metal foam with PCM. In this study, a three-dimensional numerical model was developed to simulate conductive heat transfer between metal foam and PCM. The three-dimensional lattice structure of square pillars was selected as a basic structure of the metal foam. The calculation result was characterized by the effective thermal conductivity of the whole domain. A sensitivity study was conducted for mesh size, domain size, and PPI to check whether the calculation result gives a converged result or not. Lastly, the effective thermal conductivity from the lattice model was compared with existing experimental data to validate the model result

25 ENERGY STORAGE↗
DOE OSTI2024

Mesoscale modeling and semi-analytical approach for the microstructure-aware effective thermal conductivity of porous polygranular materials

Here we established a comprehensive modeling approach for investigating the microstructure-aware effective thermal conductivity ($κ_{eff}$) for porous microstructures containing solid particles and gaseous pores. Our approach combines the mesoscale computational modeling framework and the semi-analytical method, allowing for efficient prediction of $κ_{eff}$ for realistic porous microstructures, while considering complicated microstructural thermal conduction pathways effectively in the prediction. We used the diffuse-interface mesoscale computational model to generate extensive simulated $κ_{eff}$ data for realistic digital representations of microstructures with wide ranges of porosity ($f_p$), thermal conductivity of the gas phase ($κ_g$), and thermal conductivity of the solid phase ($κ_s$). From the simulated data, we identified two property variation regimes for $κ_{eff}$: (1) a slow $κ_{eff}$ increase for $κ_s ~ κ_g$; and (2) a faster $κ_{eff}$ increase for $κ_s \gg κ_g$. To capture the key features of the relationship between the microstructure and $κ_{eff}$, we derived a semi-analytical model by introducing structure and intensification factors. The two new factors incorporate the calibrated effective contribution of the solid volume with $κ_s$ and additional interfacial effects into the prediction of $κ_{eff}$, respectively, allowing for consideration of parallel, serial, and interfacial conduction mechanisms effectively. Using the selected simulation data, we quantified key model parameters within the semi-analytical model and verified that the parameterized model exhibits excellent agreement with simulated $κ_{eff}$ for the entire range of the parameter space.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An experimentally validated mesoscale model for the effective thermal conductivity of U-Zr fuels

An experimentally validated mesoscale model was developed to simulate the effective thermal conductivity (ETC) of metallic U and U–Zr nuclear fuels. The effects of microstructure, temperature, composition, and interfacial thermal resistance (ITR) were investigated. Companion experiments were conducted to validate the model. The numerical simulations clearly demonstrate that accounting for the interface (Kapitza) thermal resistance and Zr precipitation is necessary to improve the model predictions. The dependence of the effective Kapitza resistance of depleted-U and U-10Zr on temperature was determined. Finally, for both materials, the largest difference between the model calculations and the experimental data was about 4.5%, which is within the precision of the experimental measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Quantifying the thermal effect and methyl radical production in nanosecond repetitively pulsed glow discharges applied to a methane-air flame

In this work, we investigated non-equilibrium plasma produced by nanosecond repetitively pulsed glow discharges applied across a lean premixed methane-air flame. The flame is stationary, axisymmetric, and laminar. The discharges are applied on the symmetry axis crossing the reactant gases, flame front, and product gases, allowing phase-locked averaged measurements and comparisons with axisymmetric numerical simulations. The thermal effect and methyl radical production are quantified in the discharge in the reactant gas region. One-dimensional, two-beam, hybrid, femtosecond-picosecond, coherent anti-Stokes Raman scattering is used to acquire spatial and temporal profiles of temperature and oxygen-to-nitrogen concentration ratio. Photo-fragmentation laser-induced fluorescence is used to acquire quantitative two-dimensional profiles of methyl radicals in the discharge providing the first quantitative imaging of methyl produced ahead of a flame by plasma-induced methane dissociation. The spatial profiles of temperature and oxygen-to-nitrogen concentration ratio are in steady state, indicating that individual discharges have an insignificant heating effect. Upper and lower bounds of the produced mole fraction of methyl radicals in the plasma are obtained due to uncertainties in the collisional quenching rates of excited state methylidyne radicals in the plasma. The discharges produce a maximum of 600–1100 ppm of methyl radicals upstream of the flame front within 25 ns. This amount is similar to the predicted methyl mole fraction for the flame without plasma and thus represents a significant chemical perturbation to the reactants upstream of the flame front. The produced methyl follows an exponential decay in the first microsecond after the discharge with a decay constant of 8 µs close to the flame, and 0.8 µs further from the flame. The decay then deviates from the exponential curve and the methyl persists for tens of microseconds. The results suggest that for the tested configuration, the thermal effect of individual discharges through fast gas heating is negligible, while active chemical species are produced in large quantities in the reactant gases, upstream of the flame front.

hybrid fs-ps CARS↗
DOE OSTI2022

Effective thermal conductivity of insulation materials for cryogenic LH 2 storage tanks: A review

An accurate estimation of the effective thermal conductivity of various insulation materials is essential in the evaluation of heat leak and boil-off rate from liquid hydrogen storage tanks. In this work, we review the existing experimental data and various proposed correlations for predicting the effective conductivity of insulation systems consisting of powders, foams, fibrous materials, and multilayer systems. We also propose a first principles-based correlation that may be used to estimate the dependence of the effective conductivity as a function of temperature, interstitial gas composition, pressure, and structural properties of the material. We validate the proposed correlation using available experimental data for some common insulation materials. Further improvements and testing of the proposed correlation using laboratory scale data obtained using potential LH 2 tank insulation materials are also discussed.

08 HYDROGEN↗
DOE OSTI2022

Assessing the Impact of Effective Thermal Conductivity on Gas-cooled Reactor Transients in RELAP5-3D

In block-type high-temperature gas-cooled reactors (HTGRs), coolant holes in blocks lead to a reduction in heat transfer through conduction. In systems codes like RELAP5-3D, we must account for this degradation by using an effective thermal conductivity (ETC). This presentation discusses a few ETC relationships and demonstrates the impact of ETC for the modular High-Temperature Gas-Cooled Reactor 350 MW -- a computational benchmark for HTGR modeling -- and for the High Temperature Test Facility (HTTF) -- an HTGR thermal hydraulics test facility. We demonstrate that the use of ETC leads to temperatures that are higher than the bulk thermal conductivity of the block material would yield, but these differences have no meaningful impact on the transient performance of the reactors. The ETC also reduces the cooldown rate, leading to more time at elevated temperatures. Overall, while accounting for ETC is important in capturing the physics of the reactor, it is not expected to have a meaningful impact on transient performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Assessing the Impact of Effective Thermal Conductivity on Gas-cooled Reactor Transients in RELAP5-3D

High-temperature gas-cooled reactors (HTGRs) are a relatively mature advanced reactor concept that are of interest to industry and government for near-term deployment. These systems feature passive safety through low power density, coated particle fuels, and large graphite volumes that lead to slow heatup. In loss of flow transients, cooldown is achieved through conduction and radiation heat transfer. In prismatic block-type reactors, such as the mHTGR-350, the presence of coolant holes and fuel compacts alters the flow of heat through the blocks. To capture this effect in systems codes like RELAP5-3D, relationships for effective thermal conductivity (ETC) must be used to appropriately degrade the thermal conductivity. This work presents an assessment of the impact of ETC on performance of block-type gas-cooled reactors in a pressurized conduction cooldown (PCC) and depressurized conduction cooldown (DCC) transients. Models for PCC and DCC with bulk material thermal conductivity and ETC were run for both the mHTGR-350 and the High-Temperature Test Facility (HTTF) to determine the impact of ETC on transient performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Prediction of the Inter-Tube Flow Mode Transitions in the Evaporators of Multi-Effect Thermal Desalination Plants

Water is one of the most stressed resources on the planet. The limited availability of fresh water and the high cost of transportation have led to an increased interest in water desalination technologies. The two main categories of desalination techniques are membrane desalination and thermal desalination. Membrane technologies include pressure driven and electrical driven membranes. On the other hand, thermal desalination includes: multi-effect desalination (MED), multi-stage flash (MSF) desalination, and mechanical vapor compression desalination. Multi-effect desalination plants are usually made of a series of evaporators (also known as effects). In each effect, hot steam flows inside the tubes and evaporates the seawater that falls on the outside of the tubes. The vapor formed at each effect flows to the next effect and acts as the heating medium for the falling seawater. The prevailing flow mode of the falling seawater (i.e. droplet, jet, or sheet) influences heat and mass transfer as well as dry out in the evaporators of Multi-Effect Desalination (MED) plants. The objective of this paper is to predict and discuss the prevailing falling film flow modes in the evaporators of MED plants, under different operating conditions. The paper demonstrates the transitional Reynolds numbers between the main falling film modes for seawater. This closes a gap in the literature where there is a dearth of mode transition data for seawater. The effect of fluid properties and tube geometry on the transitions is discussed in details. As a result, the accuracy of the predicted transitional Reynolds numbers is evaluated via uncertainty quantification techniques.

availability↗
DOE OSTI2023

Thermal Effects in Binary Neutron Star Mergers

Abstract We study the impact of finite-temperature effects in numerical-relativity simulations of binary neutron star mergers with microphysical equations of state and neutrino transport in which we vary the effective nucleon masses in a controlled way. We find that, as the specific heat is increased, the merger remnants become colder and more compact due to the reduced thermal pressure support. Using a full Bayesian analysis, we demonstrate that this effect will be measurable in the postmerger gravitational wave signal with next-generation observatories at signal-to-noise ratios of 15.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Anomalous thermal effect in Zr Te 5 observed via photothermal measurements

In this study, we explore the magneto-thermoelectric power (MTP) of $ZrTe$ 5 , a canonical Dirac semimetal, through a novel photothermal technique. Unlike conventional thermoelectric studies that rely on on-chip heaters and are limited by fabrication processes, especially for stress-sensitive materials, our approach utilizes photothermal effects to induce temperature gradients. Our experiments, applying a magnetic field approximately parallel and transverse to the photocurrent detection direction, reveal that the photothermal method efficiently and reliably extracts both diagonal and off-diagonal components of the thermoelectric coefficient of $ZrTe$ 5 . Here, we observe that the longitudinal MTP reproduces features previously reported in thermal transport studies, while the photoinduced transverse MTP confirms the anomalous Nernst effect. This photothermal measurement technique opens new avenues for investigating transport properties in a wide range of quantum materials, both in 3D and 2D systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Measurement of the thermal effects in the dispersion relation of the dust acoustic wave in the presence of a magnetic field

This award supported an experimental study of the properties of the dust acoustic wave, low-frequency, l ongitudinal wave mode that propagates through the dust component of a dusty plasma system and is self-excited by the free energy from the ion streaming p ast the dust, in the presence of a high magnetic fiel d. In particular, this project measured the thermal state of dusty plasma system by measuring the dispersi on relation of the dust acoustic wave while varying (1) the strength and direction of the magnetic field relative to the propagation direction of the wave and (2) the neutral gas pressure. By exploiting the unique ability of the MDPX facility to generate a dusty plasma in a high magnetic field environment, it is possible to create a preferential ion flow along the magnetic field lines as the ions become magnetized. In this way, the magnetic field strength can be used to control t he strength of the ion flow through the dust cloud an d provide insight into the contribution that one of the physical mechanisms, a two-stream ion-dust instability, thought to be responsible for high temperatures that have been previously observed might have. This work was completed over two, one-week long runs o n the Magnetized Dusty Plasma eXperiment (MDPX) in the Magnetized Plasma Research Laboratory at Auburn University and supported by work at Wittenberg University (development of an electrode system that would allow for the wave mode to propagate in th e direction of gravity as the orientation of the magnetic field is changed by rotating the magnets on the M DPX device, analysis of data acquired during the experimental campaigns, testing alternative strategies to form a dust cloud based on what was learned the first experimental campaign, etc.).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Cost-Effective Thermally Activated Building Systems to Support a Power Grid System With High Penetrations Of As-Available Renewable Energy Resources

With a goal to reduce the energy cost for building operation as well as to support renewable energy sources (RES) for the power grid reliability, quality, resilience, and dispatchability, this project developed and demonstrated a novel thermally activated building envelope system that integrates Phase Change Material (PCM)-based Thermal Energy Storage (TES) and the hydronic activation into the building envelope. The main objectives of this study are: 1) to design and laboraorty-test a novel thermally activated building envelope system that integrate PCM-based TES and the hydronic activation into building envelope, and 2) to exploit this new system to significantly reduce the energy cost of operating buildings and manage and support renewable energy sources (RES), e.g., solar and wind for the power grid reliability, quality, resilience, and dispatchability. To achieve the project objectives, a new low-cost, fire-retardant PCM packaging technology (CenoPCM) was developed specifically for high-volume building applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Efficiency droop contributors in InGaN green light emitting diodes

Here, efficiency droop contributors (i.e., inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction) in InGaN green light emitting diodes (LEDs) are decoupled and quantified. First, a modified ABC model is developed, and external quantum efficiency measurements are taken under constant and pulsed currents (⁠ EQE Constant and EQE Pulsed ⁠, respectively). The LED internal quantum efficiency with and without thermal effects (⁠ IQE$^{ABC}_{Constant}$ and IQE$^{ABC}_{Pulsed}$⁠, respectively) is extracted using the modified model. Then, using Raman spectroscopy, the LED junction temperature is extracted. Finally, using the optical-electrical model (OEM), the polarization- and temperature-independent LED internal quantum efficiency (⁠ IQE OEM ) is calculated from the modified ABC model and the extracted junction temperature. By comparing external (⁠ EQE Constant ⁠) and the three internal quantum efficiencies (⁠ IQE$^{ABC}_{Constant}$, IQE$^{ABC}_{Pulsed}$⁠, and IQE OEM ), the impacts of inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction on the efficiency droop are decoupled and quantified. It is found that inherent Auger–Meitner recombination-induced droop is approximately 49% of the total efficiency droop in commercial green LEDs, while polarization-induced effects contribute about 35%, and thermal droop accounts for nearly 16%. Lastly, these findings suggest, to quash the green gap, it is critical to search for materials and device designs with low inherent Auger–Meitner coefficients and polarization fields, respectively.

42 ENGINEERING↗
DOE OSTI2025

Comparative experimental study of heat transfer processes in accumulation energy recovery exchangers

In this study, an experimental comparison between three different energy accumulating ceramic heat exchangers for energy recovery in ventilation systems was presented. The units were selected to represent three different approaches on the energy recovery process: honeycomb structure with more accumulation mass (more energy can be stored in one unit)- Unit 1.1, honeycomb structure with lower accumulation mass- Unit 1.2, and a rectangular structure with expanded heat transfer surface- Unit 1.3. The achieved results are useful for the future application of such units in ventilation systems. It was established that all evaluated units demonstrated an acceptable effectiveness of thermal energy recovery from the exhaust air. Their average energy recovery efficiency ranged between 70 % and 80 %, aligning with expected performance benchmarks for regenerative heat exchangers employed in contemporary mechanical ventilation systems. It was also established that the factor which has the highest impact on thermal effectiveness is the heat transfer surface available in the tested heat exchangers. Units with the highest number of channels (i.e., with the highest amount of single channel walls, which can be used for heat transfer) achieve the highest thermal effectiveness. However, higher thermal effectiveness can negatively affect the ventilation potential of the units. Unit 1.3, which was characterized by the highest thermal efficiency, was also characterized by the lowest achievable flow rate. It was also found that the important technical aspect that should be taken into account when analyzing accumulation energy recovery units is also the fluctuation of the supply air temperature. The ability to ensure minimal temperature fluctuations is a significant operational advantage, as it ensures a higher level of safety at lower outside temperatures.

Energy recovery↗
DOE OSTI2024

Large oscillatory thermal hall effect in kagome metals

The thermal Hall effect recently provided intriguing probes to the ground state of exotic quantum matters. These observations of transverse thermal Hall signals lead to the debate on the fermionic versus bosonic origins of these phenomena. The recent report of quantum oscillations (QOs) in Kitaev spin liquid points to a possible resolution. The Landau level quantization would most likely capture only the fermionic thermal transport effect. However, the QOs in the thermal Hall effect are generally hard to detect. In this work, we report the observation of a large oscillatory thermal Hall effect of correlated Kagome metals. We detect a 180-degree phase change of the oscillation and demonstrate the phase flip as an essential feature for QOs in the thermal transport properties. More importantly, the QOs in the thermal Hall channel are more profound than those in the electrical Hall channel, which strongly violates the Wiedemann–Franz (WF) law for QOs. This result presents the oscillatory thermal Hall effect as a powerful probe to the correlated quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Planar Thermal Hall Effect from Phonons in Cuprates

A surprising “planar” thermal Hall effect, whereby the field is parallel to the current, has recently been observed in a few magnetic insulators; this effect has been attributed to exotic excitations such as Majorana fermions or chiral magnons. Here, we investigate the possibility of a planar thermal Hall effect in three different cuprate materials, in which the conventional thermal Hall conductivity 𝜅 xy (with an out-of-plane field perpendicular to the current) is dominated by either electrons or phonons. Our measurements show that the planar 𝜅 xy from electrons in cuprates is zero, as expected from the absence of a Lorentz force in the planar configuration. By contrast, we observe a sizable planar 𝜅 xy in those samples where the thermal Hall response is due to phonons, even though it should, in principle, be forbidden by the high crystal symmetry. Our findings call for a careful reexamination of the mechanisms responsible for the phonon thermal Hall effect in insulators.

Cuprates↗