Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thresholds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Godiva IV central cavity neutron environment characterization with threshold neutron detectors

Godiva IV is a cylindrical fast burst reactor comprised of approximately 65 kg of highly enriched uranium that is operated by Los Alamos National Laboratory and sited at the National Criticality Experiments Research Center at the Nevada National Security Site in Nevada in the United States. Godiva IV is typically operated at delayed critical and in the regime spanning from sub-prompt to super-prompt bursts. Godiva IV is used for sample irradiations, criticality safety demonstrations, dosimetry studies, and for studying super-prompt behavior. In preparation for both an upcoming experiment to reduce uncertainties in the prompt fission spectrum for 235U using threshold neutron detectors, and for future research using Godiva IV, it was desired to exercise the process of the selection of threshold neutron detectors/activation foils, radiation metrology, and the subsequent adjustment of the neutron spectrum. For this exercise, nine high purity threshold neutron detectors/activation foils were irradiated in a Godiva IV burst. The foils were then analyzed using a high-purity germanium detector in the NCERC counting laboratory to determine end of irradiation specific activities for available IRDFF-II reactions. This work summarizes the Godiva IV foil irradiation, radiation metrology results, and adjusted neutron spectrum. The results of this exercise ultimately characterized the neutron environment inside the sample irradiation cavity inside Godiva IV to a higher degree than previously performed, informed decisions for the upcoming larger scale experiment, and will inform future neutron spectrum characterizations at NCERC.

Whitman, Nicholas H.↗
DOE OSTI2023

Observation of a threshold cusp at the Λ η threshold in the pK - mass spectrum with Λ$^{+}_{c}$ → pK - π + decays

We observe a narrow peaking structure in the pK - invariant-mass spectrum near the Λη threshold. The peak is clearly seen in 1.5 million events of Λ$^{+}_{c}$ → pK - π + decay using the 980 fb -1 data sample collected by the Belle detector at the KEKB asymmetric-energy e + e - collider. We try two approaches to explain this structure: as a new resonance and as a cusp at the Λη threshold. The best fit is obtained with a coherent sum of a Flatte function and a constant background amplitude with the reduced X 2 of 257/243 (p = 0.25), while the fits to Breit-Wigner functions are unfavored by more than 7σ. The best fit explains the structure as a cusp at the Λη threshold, and the obtained parameters are consistent with the known properties of Λ(1670). The observation gives the first identification of a threshold cusp in hadrons from the spectrum shape.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Influence of data uncertainty on cold season threshold-based climate indices

Climate indices are used to reduce the complex climate system and its changes to simple measures. The data basis – whether observational data or climate model data – to which the climate indices are applied, is usually subject to uncertainties. For threshold-based climate indices, the data uncertainty influences the threshold value, and, hence, the uncertainty can influence the values for the climate index. What the actual impacts of these uncertainties are on threshold-based climate indices is examined in this paper. The focus is not only on the climate model uncertainty, but also on the observational data uncertainty. The general sensitivity of each of the chosen climate indices to arbitrary changes in the threshold is studied. This shows a higher sensitivity of indices assessing extremes (ice days, heavy precipitation days) to changes in the threshold than indices that integrate a quantity over a given time interval (coldsum, consecutive days). For assessing an ensemble of climate model data with respect to their ability to reproduce the index values for current climate, the reference data uncertainty is applied to the chosen threshold-based climate indices by changing their threshold value by its corresponding uncertainty. It is shown that the climate model uncertainty can be within the range of the reference data uncertainty. When using threshold-based climate indices to assess changes in future climate periods, uncertainties should always be taken into account and ideally corrected in an appropriate way. This is especially important for indices that assess extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Heat metrics and thresholds reshape population exposure and inequality signals

Extreme heat is intensifying worldwide, yet estimates of heat hazard and exposure inequality depend on both the heat metric and how extreme days are defined. Using summer 2022 across the Mediterranean, we quantify population heat exposure with four metrics—land surface temperature (LST), air temperature (Ta), heat index (HI), and wet-bulb globe temperature (WBGT)—under absolute (fixed-value) and relative (anomaly-based) thresholds. Under absolute thresholds, total heat exposure differs by more than two orders of magnitude across metrics (31.3 billion person-days for Ta vs 0.3 billion for HI). Geographic hotspots also diverge: WBGT concentrates in humid coastal North Africa (e.g. the Nile Delta), whereas Ta and LST are more widespread. Under relative thresholds, exposure totals converge and cross-metric hotspot agreement increases (e.g. Ta–WBGT top-tercile overlap increases from 10.7% to 29.0%), shifting hotspots toward densely populated southern Europe. Crucially, the exposure–deprivation relationship also reverses across threshold frameworks: absolute thresholds concentrate exposure in more deprived North Africa and the Middle East, whereas relative thresholds shift the burden toward less-deprived European cities. This sensitivity is decision-relevant: city rankings based on WBGT exposure duration are almost completely reordered when switching threshold frameworks. Threshold choice therefore systematically reshapes hotspot patterns and inequality signals. Reporting both absolute and relative exposures can reveal hidden hotspots and support more targeted heat-risk monitoring and intervention planning.

Mediterranean↗
DOE OSTI2026

Empirical scaling of the L–H threshold power for metal wall tokamaks using a multi-device database

The empirical scaling for the H-mode power threshold in tokamaks has been revisited using a database with threshold data from machines with a metallic first wall as part of International Tokamak Physics Activity (ITPA) task TC-26. The database contains discharges from ASDEX Upgrade (AUG) (W), JET (Be/W) and Alcator C-Mod (Mo). This was motivated by reports that in like-for-like discharges the power threshold was reduced by approximately 30% after the change from carbon based to metallic first wall materials on AUG (Ryter et al 2013 Nucl. Fusion 53 113003) and JET (Maggi et al 2014 Nucl. Fusion 54 023007). The database contains L–H transition data for all hydrogen isotopes and mixtures, including T and DT from the recent JET campaigns. Compared to the ITPA 2008 scaling (Martin et al 2008 J. Phys.: Conf. Ser. 123 012033), the metal wall scaling has a smaller magnetic field exponent but a larger density exponent. We present an additional parameter to capture the strong dependence of the L–H power threshold (approx. factor 2) on the magnetic configuration in the divertor on JET. The scaling recovers the approximate inverse isotope mass scaling of the threshold power. Alternative scalings involving the plasma current and poloidal magnetic field are explored. Despite the reduction in threshold observed earlier, the scalings based on the metal wall database do not necessarily extrapolate to a lower threshold for ITER compared to the ITPA 2008 scaling, especially at high density. The divertor configuration effect induces the largest uncertainty in the extrapolation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Characterization of the fatigue threshold behavior of UHMWPE

Ultra-high-molecular-weight-polyethylene (UHMWPE) has been the material of choice for bearings in total joint replacements (TJRs) for decades as a result of its excellent wear resistance, chemical inertness, energetic toughness, low friction, and biocompatibility. Utilization of this polymer in orthopedic devices requires oxidation, wear, and fatigue resistance. Balancing these important properties by tailoring processing techniques and modulating microstructural features has been an ongoing endeavor in the field. Research into the clinical applications of UHMWPE has primarily focused on the challenges of wear and oxidation while studies into the realm of fatigue have been more limited. Literature gaps exist in fully understanding the fatigue crack initiation near notches or propagation of small existing flaws in UHMWPE used in TJRs. In particular, the characterization of the fatigue thresholds and near-threshold fatigue behavior of orthopedic grade UHMWPE has yet to be thoroughly explored. In this work, we characterized the fatigue crack arrest threshold of clinically-relevant UHMWPE formulations. Correlations between the fatigue thresholds and bulk mechanical properties as well as microstructural properties were examined across these medical resins. The important role played by crosslinking in influencing the fatigue performance of UHMWPE is highlighted in this study. In addition, it is established that J-integral fracture toughness is the best predictor of fatigue thresholds and could possibly be used as a stand-in metric for fatigue performance if thresholds cannot be directly ascertained. Finally, this study corroborates that the true constitutive parameters best describe the mechanical behavior of UHMWPE.

Cross-linking↗
DOE OSTI2025

Metrics and extrapolation of resonant magnetic perturbation thresholds for ELM suppression

This large database study of resonant magnetic perturbation (RMP) edge localized mode (ELM) suppression thresholds in the AUG, DIII-D, EAST, and KSTAR tokamaks details the key strengths and weaknesses of RMP metrics. The RMP ELM suppression database used for this work contains plasma information at the time of transition from ELMing to ELM suppressed states where a clear experimental threshold is identified. The experimental threshold distributions are compared for five metrics: (1) the island overlap width, (2) pedestal top Chirikov overlap, (3) peeling edge displacement, (4) pedestal top resonant drive, and (5) edge dominant mode overlap. The distributions, the regularity of the dependence on RMP coil currents, and the sensitivities of a given metric to equilibrium reconstruction details are compared. The overlap metric proves to be a good compromise between including the appropriate plasma response physics and maintaining a numerical robustness. This quantity does not exhibit clear power-law scalings for projection, but machine learning can assist in predicting thresholds within the existing parameter ranges and providing uncertainty quantification of those predictions. Two new first-principles models, one utilizing a threshold from the non-linear Modified Rutherford equation evaluated at the pedestal top and one utilizing the SLAYER code to calculate the linear tearing threshold from torque balance, offer possible paths to extrapolation beyond the existing database parameter space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Analysis of multipacting threshold sensitivity to the random distributions of the secondary electron yield parameters

The way multipacting develops, depends strongly on the secondary emission property of the surface material. The knowledge of secondary electron yield is crucial for accurate prediction of the multipacting threshold. Variations in secondary electron yield parameters from experimental measurements create uncertainty, stemming from handling and surface preparation, and these uncertainties significantly affect multipacting threshold predictions. Despite their significance, the previous studies on the multipacting phenomenon did not adequately address the effect of an assumed random distribution of the secondary emission parameters on the multipacting threshold. Therefore, this paper aims to provide a comprehensive statistical study on how the different random distributions of the secondary emission parameters and, as a result, the uncertainty in the secondary electron yield affect multipacting thresholds. We focus on three commonly used distributions, namely uniform, normal, and truncated normal distributions, to define the uncertainty of random inputs. We use the chaos polynomial expansion method to determine how much each of the random parameters contributes to the multipacting threshold uncertainty. Additionally, we calculate Sobol sensitivity indices to evaluate the impact of the individual parameters or groups of parameters on the model outputs and study how different random distributions of these parameters affected the Sobol index results.

physics↗
DOE OSTI2023

Relative humidity threshold for oxygen generation by high-purity plutonium dioxides in 3013 containers

High-purity plutonium dioxide with adsorbed water in a sealed container can generate oxygen, but oxygen will not be generated in low water loading conditions. A threshold for oxygen generation has been observed in the hydrogen generation rate normalized by the specific power for high-purity plutonium dioxide. Normalized hydrogen generation rates above this threshold generate oxygen and below the threshold consume oxygen. The threshold rate is determined by the amount of water adsorbed onto the surface of the oxide. The relative humidity of the atmosphere that the oxide is in equilibrium with determines the amount of physisorbed water adsorbed on the surface. We calculate the relative humidity corresponding to the threshold rate as a function of mass and specific surface area of material stored in 3013 containers. Exceeding the calculated relative humidity may result in flammable gas mixtures of hydrogen and oxygen at some time during storage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

A Novel Method for Setting Meaningful Thresholds for RMS-Energy Oscillation Detectors

Oscillation detection and mitigation is a crucial aspect of reliable power system operation. Several transmission system operators and reliability coordinators use the RMS-energy method of oscillation detection, but the process of setting thresholds is time and labor intensive. The current industry practice in the United States is to set thresholds based on the RMS-energy's value during ambient conditions, which can often lead to nuisance alarms that require thresholds to be manually retuned. In this paper, we propose a method for setting RMS-energy thresholds that directly accounts for oscillation amplitudes specified by the user. A theoretical analysis of the statistical properties of the RMS-energy incorporates these user-specified amplitudes, resulting in thresholds that reliably detect oscillations of interest while avoiding nuisance alarms. Theoretical results are validated with simulated measurements and the real-world practicality of the method is established with publicly available field-measured data from the Grid Event Signature Library.

Follum, James D.↗
DOE OSTI2026

Strong-Drive Limits in Josephson Circuits: From Chaos to an Unbound-Resonance Threshold

Strong microwave drives enable fast measurement and parametric control in superconducting circuits but can induce transitions out of the intended low-energy manifold. We develop a unified description of strong-drive limits in flux- and charge-driven Josephson circuits across drive frequency and dc flux bias. Using classical phase-space analysis and Floquet--Markov simulations, we identify distinct low- and high-frequency mechanisms. At low frequency, we characterize bound-state resonances and separatrix chaos and find that the flux-drive chaos threshold depends strongly on dc flux bias. At high frequency, these mechanisms are suppressed, and the dissipative steady state transfers from the central bound-state sector to outer resonances formed by above-barrier running trajectories. The resulting unbound-resonance threshold is nearly independent of drive frequency and circuit parameters over the regime studied and is controlled primarily by dc flux bias. Coherent simulations show that parametric operation persists beyond this threshold, but at a reduced rate, setting an effective upper bound on the achievable operation speed. We derive analytical criteria for both thresholds, validate them numerically, and experimentally confirm the predicted dc-bias dependence of the low-frequency threshold in a flux-driven SQUID. We also determine the timescales for transfer into the unbound-resonance regime and relaxation back to the bound-state manifold after the drive is removed. Finally, we relate the stability limits to a complementary picture based on the junction critical current and extend the framework to multitone drives and inductively shunted circuits. Together, these results identify the mechanisms limiting strong driving and suggest routes to extend the stable operating range of Josephson circuits.

You, Xinyuan [Fermilab] (ORCID:0000000291789419)↗
DOE OSTI2025

Evaluating methods to reduce duration of near-threshold fatigue crack growth rate measurements for low-alloy steels in hydrogen gas

Measurement of the near-threshold fatigue crack growth rate (da/dN) vs. stress-intensity factor range (∆K) relationship in hydrogen gas is essential for maximizing the calculated design fatigue life of high-pressure hydrogen storage vessels. However, such measurements are rarely performed, since the low cyclic loading frequencies applied in standard practice lead to prohibitively protracted test durations. The objective of this study was to demonstrate two means for reducing test durations when measuring near-threshold da/dN vs. ΔK relationships under decreasing ΔK for low-alloy pressure vessel steels in hydrogen gas: 1) imposing steeper K-gradients relative to the recommended limits in standards such as ASTM E647, and 2) increasing cyclic loading frequency relative to typical values applied during fatigue crack growth testing of low-alloy steels in hydrogen gas. Recognizing that steeper K-gradients could amplify loading-history effects, test methods employing this approach were designed to mitigate such effects by either maintaining constant K max or gradually increasing the K-gradient as the threshold was approached. Although the varying K-gradient method was vulnerable to loading-history effects in the form of plasticity-induced crack closure, particularly at lower stress ratio (R) and higher starting K max values, these effects could be compensated by applying the adjusted compliance ratio (ACR) method. Here, it was demonstrated that steeper K-gradients in concert with increased cyclic loading frequency reduced the duration of near-threshold fatigue crack growth tests in hydrogen gas by more than 99% relative to standard practices.

Fatigue threshold↗
DOE OSTI2025

Threshold resummation for double-deeply virtual Compton scattering

The threshold region for double-deeply virtual Compton scattering (DDVCS) is discussed. I derive a resummation formula for the (partonic) threshold logarithms in the flavor non-singlet case. The resummations can be done by using (re)factorization theorems for the coefficient functions near the partonic thresholds. As a byproduct, we obtain the leading term in the threshold limit of the two-loop coefficient function in double-deeply-virtual Compton scattering, which agrees with the recent result from explicit calculation, providing a highly non-trivial cross-check.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Revealing the structure and electronic characteristics of Te-rich threshold switching materials for high-density integration

Ovonic threshold switching (OTS) selectors play an important role in the integration of advanced three-dimensional memory. Selectors based on tellurium (Te)-containing materials exhibit significant promise due to their low threshold voltages and superior consistency. Here we have theoretically studied the structure and electronic properties of a typical OTS material, amorphous GeTe 6 , to explore the switching mechanisms using ab initio molecular dynamics simulations. The results indicate that Ge atoms tend to bond with Te atoms, forming stable chemical bonds. The Te-centered clusters are predominantly in the form of distorted octahedrons, while the Ge-centered clusters are in the form of both octahedrons and tetrahedrons. Notably, the proportion of tetrahedrons within the 4-coordinated Ge-centered clusters reaches an impressive 66.9%. These tetrahedrons are randomly dispersed throughout the simulated cell, leading to a stable amorphous configuration. The mid-gap state observed in the mobility bandgap originates from the atomic chain composed of both over-coordinated Ge and Te atoms. It is the inherent stability of the chemical environment within amorphous GeTe 6 that enables it to maintain its amorphous phase under a repeated threshold voltage, a characteristic that distinguishes it from non-OTS materials, such as amorphous tellurium. Furthermore, our findings provide an in-depth understanding of the structure and electronic characteristics of amorphous GeTe 6 , which can promote the design and application of the Te-rich threshold switching materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Thresholded quantum sensing with a frustrated Kitaev trimer

We investigate the response of a Ramsey interferometric quantum sensor based on a frustrated, three-spin system (a Kitaev trimer) to a classical time-dependent field (signal). The system eigenspectrum is symmetric about a critical point, |𝒃| = 0, with four of the spectral components varying approximately linearly with the magnetic field and four exhibiting a nonlinear dependence. Under the adiabatic approximation and for appropriate initial states, we show that the sensor's response to a zero-mean signal is such that below a threshold, |𝒃| <⁢ 𝑏 th , the sensor does not respond to the signal, whereas above the threshold, the sensor acts as a detector that the signal has occurred. This thresholded response is approximately omnidirectional. Moreover, when deployed in an entangled multisensor configuration, the sensor achieves sensitivity at the Heisenberg limit. Such detectors could be useful both as stand-alone units for signal detection above a noise threshold and in two- or three-dimensional arrays, analogous to a quantum bubble chamber, for applications such as particle track detection and long-baseline telescopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Search for an s -wave resonance in Li 7 just above the proton-decay threshold

Near-threshold resonances play an important role in nucleosynthesis and applied nuclear science. The study of nuclei removed from stability has greatly extended the list of resonances close to decay thresholds. The no core shell model with continuum (NCSMC) recently predicted an s-wave resonance just above the proton-decay threshold of 7 Li at an excitation energy of 10.2 MeV. This potential case of a near-threshold resonance is dependent on the quantum mechanics of the p + 6 He fragments extended into the continuum. Further, the 6 He(d,n) 7 Li* reaction was employed in an attempt to populate this resonance and search for its proton decay via the invariant-mass method. No evidence of this resonance was found. However, the data collected in this search led to better constraints on the energy and width of the isobaric analog state (IAS) with (J π ,T) = (3/2 - , 3/2) and revealed a new weak resonance just above the IAS in energy, predicted by the NCSMC as a (J π , T ) = (3/2 – , 1/2) state and potentially a part of the antianalog structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Pseudorapidity densities of charged particles with transverse momentum thresholds in pp collisions at $\sqrt{s} = 5.02$ and 13 TeV

The pseudorapidity density of charged particles with minimum transverse momentum (p T ) thresholds of 0.15, 0.5, 1, and 2 GeV/c is measured in pp collisions at the center of mass energies of $\sqrt{s}$ = 5.02 and 13 TeV with the ALICE detector. The study is carried out for inelastic collisions with at least one primary charged particle having a pseudorapidity (η) within ± 0.8 and p T larger than the corresponding threshold. In addition, measurements without p T - thresholds are performed for inelastic and nonsingle-diffractive events as well as for inelastic events with at least one charged particle having |η| < 1 in pp collisions at $\sqrt{s}$ = 5.02 TeV for the first time at the LHC. These measurements are compared to the pythia 6, pythia 8, and epos-lhc models. In general, the models describe the η dependence of particle production well. However, discrepancies are observed for the highest transverse momentum threshold (p T > 2 GeV/c), highlighting the importance of such measurements for tuning event generators. The new measurements agree within uncertainties with results from the ATLAS and CMS experiments obtained at $\sqrt{s}$ =13 TeV .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

A Generalization of Threshold-Based and Probability-Based Models of Information Diffusion

Diffusion of information through complex networks is of interest in studies such as propagation prediction and influence maximization, both of which have applications in viral marketing and rumor controlling. There are a variety of information diffusion models, all of which simulate the adoption and spread of information over time. However, there is a lack of understanding of whether, despite their conceptual differences, these models represent the same underlying generative structures. For instance, if two different models utilize different conceptual mechanisms, but generate the same results, does the choice of model matter? A classification of diffusion of information models is developed based on the neighbor knowledge of the model infection requirement and the stochasticity of the model. This classification allows for the identification of models that fall into each respective category. The study involves the analysis of the following agent-based models on directed scale-free networks: (1) a linear absolute threshold model (LATM), (2) a linear fractional threshold model (LTFM), (3) the independent cascade model (ICM), (4) Bass-Rand-Rust model (BRRM) (5) a stochastic linear absolute threshold model (SLATM) (6) a stochastic fractional threshold model (SLFTM), and (7) Dodds–Watts model (DWM). Through the execution of simulations and analysis of the experimental results, the distinctive properties of each model are identified. Our analysis reveals that similarity in conceptual design does not imply similarity in behavior concerning speed, final state of nodes and edges, and sensitivity to parameters. Therefore, we highlight the importance of considering the unique behavioral characteristics of each model when selecting a suitable information diffusion model for a particular application.

97 MATHEMATICS AND COMPUTING↗