Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ti3C2Tx”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

17 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Nanohybrid of Cu2O-Ti3C2Tx as a Silver-Free MXene Sorbent for Iodine Gas Capture from Nuclear Waste

The capture of volatile radioiodine from nuclear fuel reprocessing off-gas streams remains a critical challenge due to the high volatility, long half-life of 129I, and biological uptake of iodide from the environment. Although silver-based sorbents provide strong iodine chemisorption, their high cost and regulatory classification as mixed radioactive-hazardous waste motivate the development of alternative materials. Here, we report a silver-free Cu2O-Ti3C2Tx MXene hybrid for iodine gas capture at 150 °C. Structural and compositional analyses confirm the formation of Cu2O nanoparticles on Ti3C2Tx nanosheets and their subsequent conversion to thermodynamically stable CuI upon static iodine gas exposure, achieving an iodine mass loading of up to 1115 mg/g. These results demonstrate the potential of Cu2O-Ti3C2Tx MXene as a copper-based alternative to silver sorbents for elevated-temperature iodine gas capture.

iodine gas capture↗
DOE OSTI2020

Raman Spectroscopy Analysis of the Structure and Surface Chemistry of Ti3C2Tx MXene

Raman spectroscopy is one of the most useful tools for the analysis of two-dimensional (2D) materials. While MXenes are a very large family of 2D transition metal carbides and nitrides, there have been just a few Raman studies of materials from this family. Here, we report on a systematic study of the most widely used and most important MXene to date: Ti 3 C 2 T x . By synthesizing material using different methods, we show that Raman spectra of Ti 3 C 2 T x are affected not only by the composition and surface groups but also by intercalated species and stacking. Due to a plasmonic peak of Ti 3 C 2 T x around 785 nm, resonant conditions are achieved, enabling us to observe an extra peak at ~120 cm –1 , when excited with a red diode laser. We report differences in Raman spectra collected from single flakes of Ti 3 C 2 T x , colloidal solutions, and multilayer films. Lastly, we show how an undesirable photoluminescent background could serve as evidence of material degradation, which leads to the formation of defective titania and amorphous carbon. Overall, this study shows how Raman spectroscopy can be used for the characterization of important emerging 2D materials: MXenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Removal and recovery of ammonia from simulated wastewater using Ti3C2Tx MXene in flow electrode capacitive deionization

Abstract Flowing electrode capacitive deionization systems (FE-CDI) have recently garnered attention because of their ability to prevent cross contamination and operate in uninterrupted cycles ad infinitum. Typically, FE-CDI electrodes suffer from low conductivity, reducing deionization performance. Utilization of higher mass loadings to combat this leads to poor rheological properties. Herein, Ti 3 C 2 T x MXene was introduced as 1 mg mL −1 slurry electrodes in an FE-CDI system for the removal and recovery of ammonia from simulated agricultural wastewater. The electrode performance was evaluated by operating the FE-CDI system with a feed solution of 500 mg L −1 NH 4 Cl running in batch mode at a constant voltage of 1.20 and −1.20 V in charging and discharging modes, respectively. Despite the low loading, Ti 3 C 2 T x flowing electrodes showed markedly improved performance, achieving 60% ion removal efficiency in a saturation time of 115 min with an adsorption capacity of 460 mg g −1 . To understand the high adsorption performance of the electrodes, physiochemical and structural analysis was done via a variety of characterization techniques such as SEM, TEM, XRD, DLS, and Raman spectroscopy. Cyclic voltammetry and galvanostatic charge/discharge profiles were obtained to evaluate the electrochemical properties of the electrodes. The system proved to be an energy-saving technology by exhibiting a charge efficiency of 58–70% while operating at an energy consumption of 0.45 kWh kg −1 . A 92% regeneration efficiency showed that the electrodes were stable and suitable for long term and scalable usage. The results demonstrate that MXenes have the potential to improve the FE-CDI process for energy-efficient removal and recovery of ammonia.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning MXene Surface Terminations for Strategic Control of Physical Properties

Scientific Achievement • Ti3C2Tx surfaces with a higher hydroxyl group concentration play a pivotal role in surface properties and were found to be thermodynamically stable. • From the electronic bonding analysis, the charge density difference and electron localization function demonstrated a significant electron localization at the hydroxyl group, which results in a locally induced dipole on the surface. • A large tunability in the work function is found from different concentrations of functional groups on the surface which can be controlled by the concentration of HF used for etching of the MAX phase to produce the resulting MXene. Research Details • The influence of termination group distribution on the surface of Ti3C2Tx MXenes from various etching concentrations of HF was evaluated • The work functions of Ti3C2Tx MXenes with differing concentrations of functional groups were determined • The influence of termination group clustering on the surface of Ti3C2Tx MXenes was investigated by visualization of the electron localization function and charge density difference

Ward, Patrick A.↗
DOE OSTI2026

Revealing the Hidden Third Dimension of Point Defects in Two-Dimensional MXenes

Point defects govern many important functional properties of two-dimensional (2D) materials. However, resolving the three-dimensional (3D) arrangement of these defects in multi-layer 2D materials remains a fundamental challenge, hindering rational defect engineering. Here, we overcome this limitation using an artificial intelligence-guided electron microscopy workflow to map the 3D topology and clustering of atomic vacancies in Ti3C2TX MXene. Our approach reconstructs the 3D coordinates of vacancies across hundreds of thousands of lattice sites, generating robust statistical insight into their distribution that can be correlated with specific synthesis pathways. This large-scale data enables us to classify a hierarchy of defect structures-from isolated vacancies to nanopores-revealing their preferred formation and interaction mechanisms, as corroborated by molecular dynamics simulations. This work provides a generalizable framework for understanding and ultimately controlling point defects across large volumes, paving the way for the rational design of defect-engineered functional 2D materials.

2D materials↗
DOE OSTI2025

Impact of Synthesis and Aging on Titanium Carbide MXenes for Printed Microsystems

This work investigates the long-term electrical stability of Ti3C2Tx MXene Inks under accelerated aging conditions. Inks were synthesized from commercial MAX-Phase precursors, drop-cast onto custom PCB’s and monitored automated in-situ measurements. Samples aged at 85°C/85% RH, 85°C/0% RH and ambient conditions revealed distinct degradation trends. Wet aged inks showed rapid resistance increased while etched formulations exhibited long term stability. These findings highlight the influence of synthesis stage and environmental exposure on MXene Inks reliability, offering critical insights for printed MEMS and sensor applications. Ongoing measurements extend the aging timeline beyond prior studies, marking the longest evaluation under accelerated aging conditions to date.

Aging↗
DOE OSTI2020

Surface Modification of a MXene by an Aminosilane Coupling Agent

MXenes, two–dimensional (2D) transition metal carbides and/or nitrides, possess surface termination groups such as hydroxyl, oxygen, and fluorine, which are available for surface functionalization. Their surface chemistry is critical in many applications. This article reports amine functionalization of Ti 3 C 2 T x MXene surface with [3–(2–aminoethylamino)–propyl]trimethoxysilane (AEAPTMS). Characterization techniques such as X–ray photoelectron spectroscopy verify the success of the surface functionalization and confirm that the silane coupling agent bonds to Ti 3 C 2 T x surface both physically and chemically. The functionalization changes the MXene surface charge from –35 to +25 mV at neutral pH, which allows for in situ preparation of self–assembled films. Further, surface charge measurements of the functionalized MXene at different pH values show that the functionalized MXene has an isoelectric point at a pH around 10.7, and the highest reported positive surface charge of +62 mV at a pH of 2.58. Furthermore, the existence of a mixture of different orientations of AEAPTMS and the simultaneous presence of protonated and free amine groups on the surface of Ti 3 C 2 T x are demonstrated. As a result, the availability of free amine groups on the surface potentially permits the fabrication of crosslinked electrically conductive MXene/epoxy composites, dye adsorbents, high–performance membranes, and drug carriers. Surface modifications of this type are applicable to many other MXenes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Engineered MXene quantum dots for micro-supercapacitors with excellent capacitive behaviors

Micro-supercapacitors (MSCs) have drawn tremendous attention as promising candidates to power miniaturized portable/wearable electronics, but they still suffer from unsatisfactory electrochemical performance (e.g., insufficient energy density, mediocre rate capability), thus impeding their widespread applications. Here, a synergistic surface and structure engineering strategy achieved by downsizing to quantum dot scale, doping of heteroatoms, and introducing defects and functional groups is proposed to regulate the physicochemical properties of Ti 3 C 2 T x MXene. Encouragingly, the resulting MSCs based on defect-rich nitrogen-doped Ti 3 C 2 T x quantum dots (QDs) possess excellent electrochemical performance as demonstrated by large operating voltage (3.0 V in ionic liquid and 1.0 V in aqueous electrolyte), perfect rectangular CV shape even at 1000 V·s -1 , high volumetric capacitance of 33.1 F·cm -3 , and superior cycling stability after 10000 cycles. By employing experimental characterizations and density functional theory calculations, the remarkable performance of the MSCs is mainly due to the special chemical states as well as the unique surface and structural features of Ti 3 C 2 T x QDs, which offer abundant active sites, shorten ion diffusion pathways, promote ion/electron transports, and provide enhanced capacitance. Finally, this work provides a new strategy for the design of high-performance MSCs and a reference for the applications of MXene QDs in other energy-related fields.

42 ENGINEERING↗
DOE OSTI2023

Understanding and Controlling Photothermal Responses in MXenes

MXenes have the potential for efficient light-to-heat conversion in photothermal applications. To effectively utilize MXenes in such applications, it is important to understand the underlying nonequilibrium processes, including electron–phonon and phonon–phonon couplings. Here, we use transient electron and X-ray diffraction to investigate the heating and cooling of photoexcited MXenes at femtosecond to nanosecond time scales. Our results show extremely strong electron–phonon coupling in Ti 3 C 2 -based MXenes, resulting in lattice heating within a few hundred femtoseconds. We also systematically study heat dissipation in MXenes with varying film thicknesses, chemical surface terminations, flake sizes, and annealing conditions. We find that the thermal boundary conductance (TBC) governs the thermal relaxation in films thinner than the optical penetration depth. In conclusion, we achieve a 2-fold enhancement of the TBC, reaching 20 MW m –2 K –1 , by controlling the flake size or chemical surface termination, which is promising for engineering heat dissipation in photothermal and thermoelectric applications of the MXenes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

MXene Nanosheets Functionalized with Cu Atoms for Urea Adsorption in Aqueous Media

Ti 3 C 2 T x MXene is an emerging family of two-dimensional materials, and because of its large specific surface area, it has potential for many applications. Herein, a new application using Cu-doped MILD (minimally intensive layer delamination) synthesized Ti 3 C 2 T x MXene for urea removal is demonstrated. The doping of Cu on MXene results in an increase in its affinity for urea adsorption as compared to the pristine MILD synthesized MXene due to the formation of the Cu–urea complex. Previous computational studies have shown that the adsorption energies of urea on the MXene surface can be improved in the presence of Cu. The valence state of Cu in the doped MILD synthesized MXene, which binds on to the surface via Ti–O–Cu linkage, is between 0 and +1 as verified by XAS and XPS. As the optimal urea adsorption occurs on Cu as a single atom site, an increase in Cu doping on MXene does not increase urea removal due to Cu agglomeration. Furthermore, looking at the adsorption behaviour, it seems that Cu-doped MXene follows the monolayer adsorption on homogenous surface model.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Sensitive Electrochemical Cholinesterase-Inhibiting Biosensor for Organophosphorus Pesticides Based on Ti 3 C 2 TX MXene Quantum Dots

Organophosphorus pesticides (OPs) pose significant environmental and health risks due to their widespread use and toxicity, primarily by inhibiting acetylcholinesterase. Traditional detection methods are often slow and costly, highlighting the urgent need for advanced, sensitive, and accessible technologies. This study developed a highly sensitive electrochemical cholinesterase-inhibiting biosensor for OP pesticides, utilizing Ti 3 C 2 T x MXene Quantum Dots (MQDs), which was synthesized via a hydrothermal method. The biosensor’s performance was characterized using electrochemical impedance spectroscopy, differential pulse voltammetry (DPV), and cyclic voltammetry. DPV proved to be the optimal technique, exhibiting an ultralow detection limit of 1 × 10 −17 M and a wide linear range (10 −14 –10 −8 M) for chlorpyrifos (a model OP) with an estimated inhibition constant of 62 nM. The biosensor demonstrated high selectivity for OPs (chlorpyrifos, acephate, glyphosate) over a non-target pyrethroid (permethrin), confirmed by distinct electrochemical signatures and compared to in vitro cholinergic activity assays in bean beetle homogenates. The enhanced performance is attributed to the high surface-to-volume ratio, quantum confinement effects, and superior conductivity of the MQDs, as well as the robust enzyme immobilization facilitated by glutaraldehyde cross-linking and a chitosan matrix. This work presents a promising platform for rapid, sensitive, and selective detection of OP pesticides, with potential applications in environmental monitoring and public health protection.

Chemistry↗