Shock-tube water time-histories and ignition delay time measurements for H2S near atmospheric pressure
Not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
We present in this article direct-drive experiments that were carried out on the Omega facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. Two different pulse shapes were tested in order to vary the implosion stability of the same target whose parameters, dimensions and composition, remained the same. The direct-drive configuration on the Omega facility allows the accurate time-resolved measurement of the scattered light. We show that, provided the laser coupling is well controlled, the implosion time history, assessed by the “bang-time” and the shell trajectory measurements, can be predicted. This conclusion is independent on the pulse shape. In contrast, we show that the pulse shape affects the implosion stability, assessed by comparing the target performances between prediction and measurement. For the 1-ns square pulse, the measured neutron number is about 80% of the prediction. For the 2-step 2-ns pulse, we test here that this ratio falls to about 20%.
Not Available
Not Available
Extended time history plots are presented for the TC-1, TC-3, and TC-4 flights. Vibration, strain, acceleration, force, and moment data are included.
A method has been developed which takes a single seed earthquake time history and produces multiple similar seed earthquake time histories. These new time histories possess important frequency and cumulative energy attributes of the original while having a correlation less than 30% (per the ASCE/SEI 43-05 Section 2.4 [1]). They are produced by taking the fast Fourier transform of the original seed. The averaged amplitudes are then pared with random phase angles and the inverse fast Fourier transform is taken to produce a new time history. The average amplitude through time is then adjusted to encourage a similar cumulative energy curve. Next, the displacement is modified to approximate the original curve using Fourier techniques. Finally, the correlation is checked to ensure it is less than 30%. This process does not guarantee that the correlation will be less than 30% for all of a given set of new curves. It does provide a simple tool where a few additional iterations of the process should produce a set of seed earthquake time histories meeting the correlation criteria.
A method has been developed which takes a seed earthquake time history and modifies it to produce given design response spectra. It is a multi-step process with an initial scaling step and then multiple refinement steps. It is unique in the fact that both the acceleration and displacement response spectra are considered when performing the fit (which primarily improves the low frequency acceleration response spectrum accuracy). Additionally, no matrix inversion is needed. The features include encouraging the code acceleration, velocity, and displacement ratios and attempting to fit the pseudo velocity response spectrum. Also, “smoothing” is done to transition the modified time history to the seed time history at its start and end. This is done in the time history regions below a cumulative energy of 5% and above a cumulative energy of 95%. Finally, the modified acceleration, velocity, and displacement time histories are adjusted to start and end with an amplitude of zero (using Fourier transform techniques for integration).
Gamma ray burst time histories, ranging in durations from milliseconds to thousands of seconds, are as varied as the number of bursts. They show a wide array of structures from those that are very smooth to those that contain a seemingly uncountable number of spikes riding on top of other spikes. These profiles have tantalized researchers for years - they obviously hold important information on the nature of GRB's, but to date no one has been successful in analyzing them. For the past year the author has been working on algorithms to analyze these data. Two approaches have been followed in this investigation. The first is an attempt to quantify the amount of structure, or spikiness, in a profile. The second involves applying the latest theorems on chaos and fractals with the aim of extracting useful information from what seems to be a random collection of shot noise.
A general purpose FORTRAN 77 computer program (THPLOT) for plotting time histories using Calcomp pen plotters is described. The program is designed to read a time history data file and to generate time history plots for selected time intervals and/or selected data channels. The capabilities of the program are described. The card input required to define the plotting operation is described and examples of card input and the resulting plotted output are given. The examples are followed by a description of the printed output, including both normal output and error messages. Lastly, implementation of the program is described. A complete listing of the program with reference maps produced by the CDC FTN 5.0 compiler is included.
Ethanol oxidation was studied by measuring CO time-histories and ignition delay times behind reflected shockwaves at elevated pressures. In this study, experimental conditions included a temperature range of 960–1580 K, pressure range of 17.8–23.9 atm, and initial fuel concentrations of 6.54% and 0.25% with nitrogen and argon used as bath gasses, respectively. The equivalence ratio for high fuel loading was kept constant at 1.0, and for low fuel loading equivalence ratios were 1.0 and 0.5. For high fuel loading, early heat/energy release was observed in nearly all ignition delay time measurements, indicative of preignition; however, data collected are in good agreement with model predictions. These events are interpreted as a transition from mild to strong ignition. For the low fuel loading cases (Φ = 1.0 and 0.5), no early heat/energy release was observed. Comparisons of measured CO concentration profiles with the predictions from kinetic mechanisms of Metcalfe et al. (2013), Mittal et al. (2014), and Zhang et al. (2018) were made assuming constant internal energy and volume for the test gas. Such comparisons in addition with performed sensitivity and pathway analyses for CO formation revealed lower temperature sensitivity to the bimolecular reaction of methyl and hydroperoxyl radicals given by CH 3 + HO 2 CH 3 O + OH, and H-atom abstraction by the hydroperoxyl radical at the alpha site on ethanol given by elementary reaction C 2 H 5 OH + HO 2 =sC 2 H 4 OH + H 2 O 2 . Furthermore, the current study provides important validation targets for ethanol chemical kinetic mechanisms and highlights the benefits of time-history measurements at various temperatures and pressures in a shock tube, which are scare in the literature.
Soot formation is a complex dynamic and intermittent process determined by properties of the fuel, combustor design, and combustor operation. Although the major steps in soot formation (i.e., formation of precursors, inception, growth and evolution) are similar for a variety of carbonaceous fuels, applications, and operating conditions, it remains unclear when the temporal transition between these steps occurs. An engineering prediction tool coupled with computational fluid physics (CFD), therefore needs to accurately model all these complex steps. To develop such a model, we propose the time-history concept for understanding the time dependency of soot formation as a function of local properties (i.e., temperature, velocity, local fuel air ratio, etc.). We continue our previous work with modeling the DLR aero-combustor [1] with our updated in-house CFD code, Open National Combustion Code (OpenNCC), that now includes a Multiple Time-Scale Flamelet Progress Variable approach and a the semi-empirical two-equation soot model. We injected massless tracer particles upstream of the injector region of the combustor to collect time-history statistics of the solution variables. The correlations between the collected statistics with respect to the experimental soot volume fraction data showed that time-history effect of certain flow variables, including turbulent kinetic energy (TKE), and multiple species is indeed important for soot formation. We then conducted a time-history based correlation analysis to determine the key species and the concentration ranges critical for soot formation (C6H5-based nucleation, acetylene-based surface growth, and oxidation with OH and O2). Based on the time-history correlation coefficient (THCC) analysis, we propose possible modifications to improve the current two-equation model.
A phenomenology for gamma ray burst time histories is outlined. Order of their generally chaotic appearance is attempted, based on the speculation that any one burst event can be represented above 150 keV as a superposition of similarly shaped increases of varying intensity. The increases can generally overlap, however, confusing the picture, but a given event must at least exhibit its own limiting characteristic rise and decay times if the measurements are made with instruments having adequate temporal resolution. Most catalogued observations may be of doubtful or marginal utility to test this hypothesis, but some time histories from Helios-2, Pioneer Venus Orbiter and other instruments having one-to several-millisecond capabilities appear to provide consistency. Also, recent studies of temporally resolved Solar Maximum Mission burst energy spectra are entirely compatible with this picture. The phenomenology suggested here, if correct, may assist as an analytic tool for modelling of burst processes and possibly in the definition of burst source populations.
A computer program for performing frequency analysis of time history data is presented. The program uses circular convolution and the fast Fourier transform to calculate power density spectrum (PDS) of time history data. The program interfaces with the advanced continuous simulation language (ACSL) so that a frequency analysis may be performed on ACSL generated simulation variables. An example of the calculation of the PDS of a Van de Pol oscillator is presented.
OH concentration time-histories during n-heptane and methylcyclohexane (MCH) oxidation were measured behind reflected shock waves in a heated, high-pressure shock tube. Experimental conditions covered temperatures of 1121 to 1332 K, pressures near 15 atm, and initial fuel concentrations of 750 and 1000 ppm (by volume), and an equivalence ratio of 0.5 with O{sub 2} as the oxidizer and argon as the bath gas. OH concentrations were measured using narrow-linewidth ring-dye laser absorption near the R-branchhead of the OH A-X(0,0) system at 306.47 nm. These current measurements together with our recent results for n-dodecane oxidation [S.S. Vasu, D.F. Davidson, Z. Hong, V. Vasudevan, R.K. Hanson, Proc. Combust. Inst. 32 (2009), doi:10.1016/j.proci.2008.05.006] provide critically needed validation targets for jet fuel surrogate kinetic mechanisms and further improve understanding of high-pressure, high-temperature oxidation chemistry. Detailed comparisons of these OH time-histories with the predictions of various kinetic mechanisms were made. Sensitivity and pathway analyses for these reference fuel components were performed, leading to reaction rate recommendations with improved model performance. Current results are the first quantitative measurements of OH time-histories during high-pressure oxidation of these fuels, and hence are a critical step toward development of accurate reaction models for jet fuel surrogates. (author)
Abstract An observationally constrained time series of historical aerosol effective radiative forcing (ERF) from 1750 to 2019 is developed in this study. We find that the time history of aerosol ERFs diagnosed in CMIP6 models exhibits considerable variation and explore how the time history of aerosol forcing influences the probability distributions of present‐day aerosol forcing and emergent metrics such as climate sensitivity. Using a simple energy balance model, trained on CMIP6 climate models and constrained by observed near‐surface warming and ocean heat uptake, we derive estimates for the historical aerosol forcing. We find 2005–2014 mean aerosol ERF to be −1.1 (−1.8 to −0.5) W m −2 relative to 1750. Assuming recently published historical emissions from fossil fuel and industrial sectors and biomass burning emissions from SSP2‐4.5, aerosol ERF in 2019 is −0.9 (−1.5 to −0.4) W m −2 . There is a modest recovery in aerosol forcing (+0.025 W m −2 decade −1 ) between 1980 and 2014. This analysis also gives a 5%–95% range of equilibrium climate sensitivity of 1.8°C –5.1°C (best estimate 3.1°C) with a transient climate response of 1.2°C –2.6°C (best estimate 1.8°C).
Time histories of gamma-ray bursts have revealed a great diversity, both in total duration and in the details of fine time structure. Results of the gamma-ray experiment on the Helios-2 spacecraft have suggested some similarities in time profiles of events. The possibility of some characteristic 'separation times' in events may also be indicated.
The time history solution program L225 (TEV126) is described. The program calculates the time responses of a linear system by convoluting the impulsive response functions with the time dependent excitation. The convolution is performed as a multiplication in the frequency domain. Fast Fourier transform techniques are used to transform the product back into the time domain to obtain response time histories. The design and structure of the program is presented.
Propanal is an aldehyde intermediate formed during the hydrocarbon combustion process. Potentially, the use of oxygenated biofuels reduces greenhouse gas emissions; however, it also results in increased toxic aldehyde by-products, mainly formaldehyde, acetaldehyde, acrolein, and propanal. These aldehydes are carcinogenic, and therefore it is important to understand their formation and destruction pathways in combustion systems. In this work, ignition delay times were measured behind reflected shock waves for stoichiometric (Φ = 1) mixtures of propanal (CH 3 CH 2 CHO) and oxygen (O 2 ) in argon bath gas at temperatures of 1129 K < T < 1696 K and pressures around 1 and 6 atm. Measurements were conducted using the kinetics shock tube facility at the University of Central Florida. Current results were compared to available data in the literature as well as to the predictions of three propanal combustion kinetic models: Politecnico di Milano (POLIMI), National University of Ireland at Galway, and McGill mechanisms. In addition, a continuous wave-distributed feedback interband cascade laser centered at 3403.4 nm was used for measuring methane (CH 4 ) and propanal time histories behind the reflected shock waves during propanal pyrolysis. Concentration time histories were obtained at temperatures between 1192 and 1388 K near 1 atm. Sensitivity analysis was carried for both ignition delay time and pyrolysis measurements to reveal the important reactions that were crucial to predicting the current experimental results. Adjustments to the POLIMI mechanism were adopted to better match the experimental data. Further research was suggested for the H abstraction reaction rates of propanal. Finally, in addition to extending the temperature and pressure region of literature ignition delay times, we provide the first high-temperature species concentration time histories during propanal pyrolysis.