Toluene Adsorption and TPD
Raw data for toluene adsorption and TPD experiments on two different adsorbents using a custom flow-through, bench-top reactor capable of controlling gas compositions and temperature.
36 MATERIALS SCIENCE↗
SEARCH · Search NASA
Results for “Toluene adsorption”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Toluene adsorption and capacity regeneration using zeolite-based monolith and activated carbon fiber felt
Common adsorbents studied to remove volatile organic compounds (VOCs) from indoor air can release previously adsorbed VOCs back into the indoor space when the adsorbent is saturated or if the VOC concentration fluctuates. A durable adsorbent with a continuous regeneration strategy could prevent this recontamination of the indoor air and reduce adsorbent disposal waste. A deeper understanding of the adsorption and desorption behavior of VOC adsorbents is needed to create an efficient regeneration strategy. This study investigated the adsorption and thermal desorption behavior of toluene on two different adsorbents, (1) a zeolite-based adsorbent and (2) an activated carbon fiber (ACF) felt. Consistent adsorption behavior across a series of toluene concentrations was used to experimentally determine effective adsorption capacity. When the cumulative adsorption between thermal regeneration steps was maintained below the maximum effective capacity with 0% breakthrough, the zeolite-based adsorbent was found to effectively minimize passive desorption. The impact of regeneration feed conditions, such as inert, oxidizing, humidified air, on thermal desorption was examined. These conditions influenced desorption of the zeolite-based adsorbent but had minimal impact on the ACF felt adsorbent, which would lead to different regeneration schedules and methods for applications in buildings' heating, ventilation, and air conditioning (HVAC) systems.
Moses-DeBusk, Melanie [Oak Ridge National Laborato↗
X-Ray Reflectometry of the Adsorption Octadecanamide Film at the Toluene-Water Interface
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
On the mechanisms of ion adsorption to aqueous interfaces: air-water vs. oil-water
The adsorption of ions to water-hydrophobe interfaces influences a wide range of phenomena, including chemical reaction rates, ion transport across biological membranes, and electrochemical and many catalytic processes; hence, developing a detailed understanding of the behavior of ions at water-hydrophobe interfaces is of central interest. Here, we characterize the adsorption of the chaotropic thiocyanate anion (SCN − ) to two prototypical liquid hydrophobic surfaces, water-toluene and water-decane, by surface-sensitive nonlinear spectroscopy and compare the results against our previous studies of SCN − adsorption to the air-water interface. For these systems, we observe no spectral shift in the charge transfer to solvent spectrum of SCN − , and the Gibb’s free energies of adsorption for these three different interfaces all agree within error. We employed molecular dynamics simulations to develop a molecular-level understanding of the adsorption mechanism and found that the adsorption for SCN − to both water-toluene and water-decane interfaces is driven by an increase in entropy, with very little enthalpic contribution. This is a qualitatively different mechanism than reported for SCN − adsorption to the air-water and graphene-water interfaces, wherein a favorable enthalpy change was the main driving force, against an unfavorable entropy change.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Solvent Reorganization and Surface–Species Interactions Control Transfer Hydrogenation Rates in Sn-Beta Zeolites
Reorganization of confined alcohol networks reshapes adsorption and activation thermodynamics in Lewis acid zeolites, yet the roles of adsorbate sterics and non-H-bonding cosolvents remain unclear. Here, we investigate transfer hydrogenation of methyl- (mCH) and tert-butylcyclohexanone (tbCH) with 2-butanol over hydrophobic Sn-Beta. First-order rates per defect-open Sn site are 2–5× higher for mCH than tbCH, but converge in the zero-order regime (333–393 K), indicating that solvent reorganization entropically drives adsorption, while bond activation is insensitive to ketone structure. Reactions in toluene or acetonitrile (with 1 M 2-butanol) show that intraporous solvent organization governs transition-state stabilization: on hydrophobic Sn-Beta, apparent enthalpies and entropies rise with decreasing solvent polarity, whereas hydrophilic zeolites display nearly constant barriers across solvents. Liquid-phase IR spectroscopy corroborates these trends, showing that hydrophilic pores enforce 2-butanol-like solvation environments even in toluene. Together, these results reveal how zeolite pores regulate the intraporous solvent structure, whose reorganization upon adsorption reshapes the thermodynamic landscape of Lewis acid catalysis
Adsorption↗
Asphaltene-induced spontaneous emulsification: Effects of interfacial co-adsorption and viscoelasticity
Asphaltenes are a class of high molecular weight aromatic compounds found in crude oil. They adsorb onto toluene-water interfaces and induce a spontaneous emulsification phenomenon, whereby stable water-in-oil emulsions form without the need of an external energy input. This work aims to control and understand the factors affecting spontaneous droplet formation in the presence of asphaltene adsorption. This is particularly useful for crude oil refining, where the presence of a stable emulsion hampers the efficiency of downstream processing operations. We explore the effect of the addition of copolymers designed as crude oil flow improvers as a means to control the extent of emulsion formation. We find that the polymers competitively adsorb onto the toluene-water interface and diminish spontaneous emulsification. Additionally, we conduct fluorescence microscopy experiments and measurements of the interfacial energy to determine the mechanism of spontaneous emulsification in asphaltene systems. We conclude that an emulsion forms via the diffusion of molecular water into the oil phase and subsequent binding with asphaltene aggregates, leading to the nucleation of micrometer-sized water droplets. We find that the polymer forms complexes with the dissolved asphaltenes, possibly hampering the ability of diffused water to bind to the asphaltenes and reducing the extent of spontaneous emulsification. Finally, we investigate the role of interfacial shear and dilatational viscoelasticity to better understand which fundamental interfacial properties are important in the emulsification of asphaltene-laden systems. We find that the rate of formation of an interfacial microstructural network is inversely correlated with the extent and rate of spontaneous emulsification.
42 ENGINEERING↗
A comparative analysis of different van der Waals treatments for molecular adsorption on the basal plane of 2H-MoS 2
The binding energy of hydrogen sulfide, ammonia, ethane, ethylene, butadiene, benzene, toluene, pyridine, pyrrole, and thiophene on the basal plane of the semi-conducting 2H-molybdenum sulfide (MoS 2 ) was calculated with the following flavors of Density Functional Theory (DFT): GGA-PW91, PBE-D3, vdW-DF, optPBE, optB86b, optB88, vdW-TS, and BEEF-vdW. The GGA-PW91 binding energies are negligible (<0.07 eV in magnitude) in all cases. The predictions with vdW-DF and PBE-D3 are the closest (error <0.05 eV) to the isosteric heats of adsorption calculated from reported temperature programmed desorption data for thiophene and butadiene. For all dispersion flavors examined here, the magnitude of the dispersion contribution to the binding energy increases linearly with the number of heavy atoms in the adsorbate, with each atom contributing 0.05 eV (BEEF-vdW) – 0.09 eV (optB88-vdW). Further, this implies that the calculated adsorption constants of molecules larger than acridine (i.e., comprising > 14 non-heavy atoms) can vary by more than four orders of magnitude at industrial conditions depending on the chosen method of dispersion correction. Further, dispersion effects fall off rapidly (>0.03 eV/ non-hydrogen atom/Å) as the adsorbate-surface distance increases.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Analysis of Ion-Exchanged ZSM-5, BEA, and SSZ-13 Zeolite Trapping Materials under Realistic Exhaust Conditions
An industry-defined evaluation protocol was used to evaluate the hydrocarbon trapping (HCT) and passive NOx adsorption (PNA) potential for BEA, ZSM-5, and SSZ-13 zeolites with ion-exchanged Pd or Ag. All materials underwent 700 °C degreening prior to exposure to an industry-derived protocol gas stream, which included NOx, ethylene, toluene, and decane as measured trapping species as well as common exhaust gasses CO, H2O, O2, CO2, and H2. Evaluation showed that BEA and ZSM-5 zeolites were effective at trapping hydrocarbons (HCs), as saturation was not achieved after 30 min of exposure. SSZ-13 also stored HCs but was only able to adsorb 20–25% compared to BEA and ZSM-5. The presence of Ag or Pd did not impact the overall HC uptake, particularly in the first three minutes. Pd/zeolites had significantly lower THC release temperature, and it aided in the conversion of the released HCs; Ag only had a moderate effect in both areas. With respect to NOx adsorption, the level of uptake was much lower than HCs on all samples, and Ag or Pd was necessary with Pd being notably more effective. Additionally, only Pd/ZSM-5 and Pd/SSZ-13 continue to store a portion of the NOx above 200 °C, which is critical for downstream selective catalytic NOx reduction (SCR). Hydrothermal aging (800 °C for 50 h) of a subset of the samples were performed: BEA, Pd/BEA, ZSM-5, Pd/ZSM-5, and Pd/SSZ-13. There was a minimal effect on the HC storage, ~10% reduction in capacity with no effect on release temperature; however, only Pd/SSZ-13 showed significant NOx storage after aging.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of Strength of Soluble and Solid Acid Catalysts on Selectivity in Aldol Reactions
Aldol reactions can follow the classical condensation path and produce an α,β-unsaturated carbonyl compound and water, however in some cases, aldol chemistry may be steered towards a fission that gives an olefin and a carboxylic acid. This investigation examines how the strength of Brønsted acid sites—both in homogeneous and heterogeneous catalysis—controls these two pathways and their kinetics. The cross-aldol reaction between benzaldehyde and 3-pentanone served as test case. Batch reactions, conducted in toluene as solvent at a temperature of 140 °C under autogenous pressure, were analyzed by GC and in situ ATR-FTIR spectroscopy to determine product distributions and rate constants for condensation and fission pathways. A series of soluble acids including a family of sulfonic acids mostly favored the condensation pathway, with formic acid as the weakest in the series by its pKa being inactive for aldol chemistry. Significant amounts of fission products were rare except for the known selectivity of phosphoric acid, and the circumstances were difficult to delineate. For the sulfonic acid family, the logarithm of the first-order condensation rate constants scaled only roughly with pKa (water) values, whereas a good correlation was obtained with calculated deprotonation Gibbs energies in toluene. A series of H-forms of isomorphously substituted beta zeolites, HESiBEA with E = Al, Ga, Fe, or B, favored the fission pathway. Site density and site strength were characterized by calorimetric measurements of the heats of adsorption of isopropylamine, which decreased in the order Al > Ga, Fe > B. The logarithm of the site-normalized first-order fission rate constants scaled roughly with the heats of adsorption and correlated excellently with reported deprotonation energies. In conclusion, acid strength mainly affects activity and can be seen as a pre-requisite for either aldol condensation or fission chemistry, whereas additional, yet to be full clarified catalyst properties and reaction conditions are required to steer aldol chemistry towards fission selectivity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Ion-specific clustering of metal-amphiphile complexes in rare earth separations
The nanoscale structure of a complex fluid can play a major role in the selective adsorption of ions at the nanometric interfaces, which is crucial in industrial and technological applications. Here we study the effect of anions and lanthanide ions on the nanoscale structure of a complex fluid formed by metal-amphiphile complexes, using small angle X-ray scattering. The nano- and mesoscale structures we observed can be directly connected to the preferential transfer of light (La and Nd) or heavy (Er and Lu) lanthanides into the complex fluid from an aqueous solution. While toluene-based complex fluids containing trioctylmethylammonium-nitrate (TOMA-nitrate) always show the same mesoscale hierarchical structure regardless of lanthanide loading and prefer light lanthanides, those containing TOMA-thiocyanate show an evolution of the mesoscale structure as a function of the lanthanide loading and prefer heavy lanthanides. The hierarchical structure indicates the presence of attractive interactions between ion-amphiphile aggregates, causing them to form clusters. A clustering model that accounts for the hard sphere repulsions and short-range attractions between the aggregates has been adapted to model the X-ray scattering results. The new model successfully describes the nanoscale structure and helps in understanding the mechanisms responsible for amphiphile assisted ion transport between immiscible liquids. Accordingly, our results imply different mechanisms of lanthanide transport depending on the anion present in the complex fluid and correspond with anion-dependent trends in rare earth separations.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Synthesis of high-surface area tungstated zirconia by atomic layer deposition on mesoporous silica
Atomic layer deposition (ALD) was used to prepare ZrO 2 films on the surface of the mesoporous silica, SBA-15, and to modify the surface of these films with WO 3 in order to form tungstated zirconia. Adsorption-desorption isotherms, pore size distributions, and transmission electron microscopy demonstrated that the ALD synthesis produced zirconia films that were conformal to the SBA-15 pores. DRIFT spectroscopy of pyridine adsorbed on the tungstated-zirconia SBA-15 samples showed adsorbed pyridinium ions, confirming the presence of Brønsted-acid sites on this material, consistent with what has been reported for bulk tungstated zirconia. Here, the ALD-synthesized, tungstated-zirconia SBA-15 was also shown to be active in the acid-catalyzed H-D exchange between toluene and D 2 O.
Brønsted acid site↗