Direct observations of Pd–Te compound formation within noble metal inclusions in spent nuclear fuel
Not Available
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
SEARCH · Search NASA
Results for “Transition metal alloys and compounds”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Exploring the elastic and electronic properties of chromium molybdenum diboride alloys
We perform first-principles calculations to study the structural, mechanical, thermal, electronic, and magnetic properties of Cr 1-x Mo x B 2 for x = 0.25, 0.33, 0.50, 0.67 and 0.75. Based on structural search methods, we determine the ground-state structure for each concentration. The ternaries are either monoclinic (x = 0.25, 0.75) or trigonal (x = 0.33, 0.50, 0.67). The calculated mechanical properties reveal that the strength of Cr 1-x Mo x B 2 is maximized for x = 0.50. Cr 0.5 Mo 0.5 B 2 exhibits excellent mechanical properties (B = 298 GPa, Y = 558 GPa, G = 235 Gpa, ν = 0.19, H v =27 GPa), surpassing those of β-MoB 2 at a lower cost. All of these ternaries are hard alloys with Vickers hardness greater than 24 GPa. Chemical bonding analysis demonstrates that the strength of the new compounds is related to the alternating planar and buckled B-B layers, as well as the strong TM-B bonds. Finally, the enhanced strength of Cr 0.5 Mo 0.5 B 2 is a consequence of the high density of strong interlayer Cr-Mo metallic bonds around the Fermi level.
36 MATERIALS SCIENCE↗
High entropy alloys with hexagonal close-packed structure derived from thin film combinatorial approach
A thin film combinatorial synthesis approach was utilized to develop a compositional and structural library for the OsRuWCo alloy system. The survey of this alloy space produced 24 unique compositions and their corresponding crystal structures, which represent a phase map where amorphous and single-phase hexagonal close-packed alloys were identified. Based on the identification of a promising candidate film region, a new high entropy alloy based on OsRuWCo, but with non-equiatomic composition, was synthesized in bulk form. The alloy exhibited a single-phase hexagonal close-packed structure in the as-cast state. Three derivatives from this system were also developed by considering the heat of mixing, atomic size, and binary solubility. These new alloys are based on OsRuWCoIr and OsRuWCoFe, both of which exhibit single-phase hexagonal close-packed as-cast structures, as determined by X-ray diffraction and electron microscopy. Additionally, this large compositional space was utilized to evaluate conventional parameters that describe high entropy alloys (ΔS mix , ΔH mix , Ω, δ, and VEC), and these were found to elucidate the criteria for solid solution formation in this system. Additionally, trends illustrating the evolution from amorphous to crystalline phases are demonstrated and discussed. It is concluded that in this particular case, the dominant factors promoting crystallinity are thermodynamic or electronic, rather than geometric.
36 MATERIALS SCIENCE↗
Helical spin ordering in room-temperature metallic antiferromagnet Fe 3 Ga 4
Metallic Fe 3 Ga 4 displays a complex magnetic phase diagram that supports an intermediate antiferromagnetic (AFM) helical spin structure (HSS) state at room temperature which lies between two ferromagnetic (FM) phases. Here, magnetic measurements along the three crystallographic axes were performed in order to develop a model for the temperature and field dependence of the HSS state. These results show that the AFM state is a helically ordered spiral propagating along the c-axis with the magnetic moments rotating in the ab-plane. Under applied magnetic field, the AFM state exhibits a metamagnetic transition to conical ordering before entering a fully field-polarized FM state at high fields. The conical ordering in the AFM state is anisotropic even within the ab-plane and may gives rise to Berry phase effects in transport measurements. Metallic conductivity from density of states computations was confirmed through resistivity measurements and no anomalous behavior was observed through the various magnetic transitions.
36 MATERIALS SCIENCE↗
Evaluation of Equiatomic CrMnFeCoNiCu System and Subsequent Derivation of a Non-Equiatomic MnFeCoNiCu Alloy
Investigation into non-equiatomic high-entropy alloys has grown in recent years due to questions about the role of entropy stabilization in forming single-phase solid solutions. Non-equiatomic alloys have been shown to retain the outstanding mechanical properties exhibited by their equiatomic counterparts and even improve electrical, thermal, and magnetic properties, albeit with relaxed composition bounds. However, much remains to understand the processing–structure–property relationships in all classes of so-called high-entropy alloys (HEAs). Here, we are motivated by the natural phenomena of crystal growth and equilibrium conditions to introduce a method of HEA development where controlled processing conditions determine the most probable and stable composition. This is demonstrated by cooling an equiatomic CrMnFeCoNiCu alloy from the melt steadily over 3 days (cooling rate ~4 °C/h). The result is an alloy containing large Cr-rich precipitates and an almost Cr-free matrix exhibiting compositions within the MnFeCoNiCu system (with trace amounts of Cr). From this juncture, it is argued that the most stable composition is within the CrMnFeCoNiCu system rather than the CrMnFeCoNi system. With further optimization and evaluation, a unique non-equiatomic alloy, Mn 17 Fe 21 Co 24 Ni 24 Cu 14 , is derived. The alloy solidifies and recrystallizes into a single-phase face-centered cubic (FCC) polycrystal. In addition to possible applications where Invar is currently utilized, this alloy can be used in fundamental studies that contrast its behavior with its equiatomic counterpart and shed light on the development of HEAs.
36 MATERIALS SCIENCE↗
Method and apparatus for hydrogen production from water
A method, apparatuses and chemical compositions are provided for producing high purity hydrogen from water. Metals or alloys capable of reacting with water and producing hydrogen in aqueous solutions at ambient conditions are reacted with one or more inorganic hydrides capable of releasing hydrogen in aqueous solutions at ambient conditions, one or more transition metal compounds are used to catalyze the reaction and, optionally, one or more alkali metal-based compounds. The metal or alloy is preferably aluminum. The inorganic hydride is from a family of complex inorganic hydrides; most preferably, NaBH.sub.4. The transition metal catalyst is from the groups VIII and IB; preferably, Cu and Fe. The alkali metal-based compounds are preferably NaOH, KOH, and the like. Hydrogen generated has a purity of at least 99.99 vol. % (dry basis), and is used without further purification in all types of fuel cells, including the polymer electrolyte membrane (PEM) fuel cell.
Muradov, Nazim Z.↗
Lattice vacancy migration barriers in Fe-Ni alloys, and an indication as to why Ni atoms diffuse slowly: A first-principles study
Lattice vacancy migration barriers in ferromagnetic Fe 𝑥 Ni 1−𝑥 alloys (0.4 ≤ 𝑥 ≤ 0.6) are accurately quantified within the framework of ab initio electronic structure calculations using the nudged elastic band (NEB) method. Both the atomically disordered (A1) fcc phase, as well as the atomically ordered, tetragonal L1 0 phase—which is under consideration as a material for a rare-earth-free gap magnet for advanced engineering applications—are investigated. Across an ensemble of NEB calculations performed on supercell configurations spanning a range of compositions and containing disordered, partially ordered, and fully ordered structures, we find that Ni-vacancy interchanges encounter significantly higher energetic barriers than do Fe-vacancy interchanges. We contend that this aspect is a key factor in determining the differences in mobility between Fe and Ni atoms in this ferromagnetic alloy. Moreover, we are able to interpret these findings in terms of the ferromagnetic alloy's underlying spin-polarized electronic structure. Specifically, we report a coupling between the size of local lattice distortions and the magnitude of the local electronic spin polarization around vacancies. This causes Fe atoms to relax into lattice vacancies, while Ni atoms remain rigidly fixed to their original lattice positions. These results give atomic-scale insight into the longstanding experimental observation that Ni exhibits remarkably slow atomic diffusion in Fe-Ni alloys.
density functional theory↗
Machine-learning enabled thermodynamic model for the design of new rare-earth compounds
We employ a descriptor based machine-learning approach to assess the effect of chemical alloying on formation-enthalpy of rare-earth intermetallics. Application of machine-learning approaches in rare-earth intermetallic design have been sparse due to limited availability of reliable datasets. In this work, we developed an ‘in-house’ rare-earth database with more than 600 + compounds, each entry was populated with formation enthalpy and related atomic features using high-throughput density-functional theory (DFT). The SISSO (sure independence screening and sparsifying operator) based machine-learning method with meaningful atomic features was used for training and testing the formation enthalpies of rare earth compounds. The complex lattice function coupled with the machine-learning model was used to explore the effect of transition metal alloying on the energy stability of Ce based cubic Laves phases (MgCu 2 type). The SISSO predictions show good agreement with high-fidelity DFT calculations and X-ray powder diffraction measurements. Our study provides quantitative guidance for compositional considerations within a machine-learning model and discovering new metastable materials. The electronic-structure of Ce-Fe-Cu based compound was also analyzed to get an in-depth understanding of the electronic origin of phase stability. The interpretable analytical models in combination with density-functional theory and experiments provide a fast and reliable design guide for discovering technologically useful materials.
36 MATERIALS SCIENCE↗
Search for new high temperature thermoelectric materials
Although important efforts are actually devoted to improve Si-Ge materials, their thermoelectric energy conversion efficiency remains relatively low and the nondimensional ZT value does not exceed 1. Higher values can be obtained by investigating new materials. A search for new high temperature thermoelectric materials identified a certain number of compounds between transition metals and bismuth, antimony and germanium as potential candidates. Results of the preliminary synthesis of samples by a variety of techniques (Bridgman, mechanical alloying) are presented as well as some electrical measurements. Some compounds showed interesting properties and need to be investigated in more details.
Caillat, Thierry↗
Indium segregation in Gd 5 (Si, Ge) 4 magnetocaloric materials
Chemical substitution is one of the most efficient tools to tune and optimize magnetic and magnetocaloric properties of the giant magnetocaloric materials. In particular, Indium substitutions could be useful both for tuning properties of these interesting intermetallic materials and to unveil their local-scale behavior across the magnetostructural transition via hyperfine techniques. Hence, in order to investigate the effect of Indium additions on the crystal structure, micro-structure, magnetic and magnetocaloric properties, a series of In-containing samples derived from the base Gd 5 Si 1.2 Ge 2.8 stoichiometry were prepared. Here, the major findings are that while In is insoluble in the 5:4 phase, it will instead promote the emergence of the impurity 5:3 phase and segregates into this phase. Hence, In leads to major crystallographic changes, which enhance atomic disorder and disrupt the Si to Ge ratio in the 5:4 phase. Subsequently, a higher 5:4 unit cell volume and a lower magnetic ordering temperature are found in the In-substituted samples. Finally, the magnetocaloric properties of the In-substituted samples reveal a detrimental effect on the maximum magnetic entropy change.
36 MATERIALS SCIENCE↗
Mixed Oxygenate Conversion to Sustainable Aviation Fuel via Ketones Intermediate
This report describes our effort in developing Pd based bimetallic catalysts during Tandem ketone condensation-hydrogenation reaction. We have synthesized a series of bimetallic catalysts containing equimolar amount of Pd with various other 3d, 4d and 5d transition and coinage metals. The activity of theses bimetallic catalysts towards C=C and C=O hydrogenation was evaluated using mesityl oxide and 2-heptanone as model compounds. All these catalysts show much higher activity towards C=C hydrogenation compared to C=O hydrogenation at a given temperature and at different H2 pressure, indicated the higher intrinsic activity of Pd based bimetallic catalysts towards C=C hydrogenation. Alloy catalysts with Pd and other 4d and 5d metals such as PdRu, PdRh, PdPt and PdIr shows higher activity towards both C=C and C=O hydrogenation compared to baseline Pd catalyst as well as alloy catalysts containing Pd and 3d transition metals. Among the different Pd-3d metal alloy catalysts, the activity of the bimetallic catalysts depends on alloying transition metals. Although, PdRu, PdRh, PdPt and PdIr catalysts shows very high activity towards C=O hydrogenation of 2-heptanone, the same catalysts didn’t show any C=O hydrogenation when ?,?-unsaturated carbonyl compound such as mesityl oxide was used as the model substrate. Based on these results, it is evident that Pd based bimetallic catalysts are very selective to the C=C hydrogenation and their activity could be tuned by the judicious choice of the alloying elements. Although alloying with Ru, Rh and Pt shows significant rate enhancement in case of C=C hydrogenation reaction, higher cost of those metals prevents their usage in industry as it significantly increases the cost of the catalyst. Considering all the factors, we have identified PdZn as one of promising alternative of Pd catalyst as it shows comparable activity towards C=C hydrogenation and reduces the activity for C=O hydrogenation. Based on the electrochemical CO stripping, we unambiguously established the weaker bonding CO on the PdZn surface compared to pristine Pd and highlight the benefits of its usage due to higher CO tolerance.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High performance earth-abundant electrocatalysts for hydrogen evolution reaction and other reactions
Electrodes for catalyzing electrochemical reactions (e.g., the hydrogen evolution reaction) are provided. The electrode may comprise a ternary pyrite-phase transition metal phosphochalcogenide (e.g., CoPS) disposed on a substrate, wherein the ternary pyrite-phase transition metal phosphochalcogenide is a solid material of a ternary compound of a transition metal, phosphorous (P), and a chalcogen, the solid material characterized by a substantially single, ternary alloy phase having a pyrite crystal structure. Methods of using and making the electrodes are also provided.
Jin, Song↗
Calcium-metal alloy anode materials for reversible calcium-ion batteries
Calcium ion batteries are provided. The calcium ion batteries include a cathode, an alloying anode composed of one or more intermetallic calcium compounds in electrical communication with the cathode; and an electrolyte disposed between the anode and the cathode. The intermetallic calcium compounds are intermetallic compounds of calcium and transition metals and metalloids.
Yao, Zhenpeng↗
An energetic link between order and strength in metals: A nanocrystalline strength limit in high-entropy alloys and intermetallic compounds
The metallurgy and materials communities have long understood and exploited fundamental links between chemical and structural ordering in metallic solids to tailor their mechanical properties. We extend these ideas to include prediction of the nanocrystalline strength limit in high-entropy alloys and intermetallic compounds, where a breakdown occurs in the classical Hall-Petch strengthening behavior. The highest reported strength achievable through alloying has rapidly climbed and given rise to new classifications of materials with extraordinary properties, with a notable case being nanocrystalline metals. High-entropy alloys (chemically disordered, concentrated solid solutions) and intermetallic compounds are two boundary cases of how tailored order can be used to manipulate mechanical behavior. Here, we show that the complex electronic-structure mechanisms governing the peak strength of alloys and pure metals can be reduced to a few physically meaningful parameters based on their atomic arrangements and used – with no fitting parameters – to predict the maximum strength of these materials. This includes a generalized energy-based accounting for the degree of structural and chemical ordering that allows for rapid and reasonably accurate prediction of peak strength (validated in the nanocrystalline limit) as a function of temperature. Predictions of maximum strength based on the activation energy (with all materials properties derived from DFT calculations or experiments) for a stress-driven transition to an amorphous state is shown to accurately describe the breakdown in Hall-Petch behavior at the smallest crystallite sizes for pure metals, intermetallic compounds, high-entropy alloys, and metallic glasses. Further, this activation energy is also shown to be directly proportional to interstitial electronic charge density, which is a good predictor of ductility, stiffness (moduli), and phase stability in high-entropy alloys and solid metals generally. The proposed framework suggests the possibility of coupling ordering and intrinsic strength to mechanisms like dislocation nucleation, hydrogen embrittlement, and transport properties, such as through correlations between the activation energies for amorphization with stacking-fault and grain boundary energies. It additionally opens the prospect for greatly accelerated structural materials design and development to address materials challenges limiting more sustainable and efficient use of energy.
36 MATERIALS SCIENCE↗
Ab initio modeling and experimental investigation of Fe 2 P by DFT and spin spectroscopies
Fe 2 P alloys have been identified as promising candidates for magnetic refrigeration at room-temperature and for custom magnetostatic applications. The intent of this study is to accurately characterize the magnetic ground state of the parent compound, Fe 2 P, with two spectroscopic techniques, μSR and NMR, in order to provide solid bases for further experimental analysis of Fe 2 P-type transition metal based alloys. Herein, we perform zero applied field measurements using both techniques below the ferromagnetic transition T C = 220 K. The experimental results are reproduced and interpreted using first principles simulations, validating this approach for quantitative estimates in alloys of interest for technological applications.
36 MATERIALS SCIENCE↗
Intermetallic Nanocatalysts from Heterobimetallic Group 10–14 Pyridine-2-thiolate Precursors
Intermetallic compounds are atomically ordered inorganic materials containing two or more transition metals and main-group elements in unique crystal structures. Intermetallics based on group 10 and group 14 metals have shown enhanced activity, selectivity, and durability in comparison to simple metals and alloys in many catalytic reactions. While high-temperature solid-state methods to prepare intermetallic compounds exist, softer synthetic methods can provide key advantages, such as enabling the preparation of metastable phases or of smaller particles with increased surface areas for catalysis. In this work, we study a generalized family of heterobimetallic precursors to binary intermetallics, each containing a group 10 metal and a group 14 tetrel bonded together and supported by pincer-like pyridine-2-thiolate ligands. Upon thermal decomposition, these heterobimetallic complexes form 10–14 binary intermetallic nanocrystals. Experiments and density functional theory (DFT) computations help in better understanding the reactivity of these precursors toward the synthesis of specific intermetallic binary phases. Using Pd 2 Sn as an example, we demonstrate that nanoparticles made in this way can act as uniquely selective catalysts for the reduction of nitroarenes to azoxyarenes, which highlights the utility of the intermetallics made by our method. Employing heterobimetallic pincer complexes as precursors toward binary nanocrystals and other metal-rich intermetallics provides opportunities to explore the fundamental chemistry and applications of these materials.
10-14 intermetallics↗
Thermodynamics and Magnetism of SmFe12 Compound Doped with Co and Ni: An Ab Initio Study
Ni-doped Sm(Fe1−xCox)12 alloys are investigated for their magnetic properties. The Sm(Fe,Co)11M1 compound (M acts as a stabilizer) with the smallest (7.7 at.%) rare-earth-metal content has been recognized as a possible contender for highly efficient permanent magnets thanks to its significant anisotropy field and Curie temperature. The early transition metals (Ti-Mn) as well as Al, Si, and Ga stabilize the SmFe12 compound but significantly decrease its saturation magnetization. To keep the saturation magnetization in the range of 1.4–1.6 T, we suggest replacing a certain amount of Fe and Co in the Sm(Fe1−xCox)12 alloys with Ni. Ni plays the role of a thermodynamic stabilizer, and contrary to the above-listed elements, has the spin moment aligned parallel to the spin moment of the SmFe12 compound, thereby boosting its saturation magnetization without affecting the anisotropy field or Curie temperature.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Mechanisms of elevated-temperature deformation in the B2 aluminides NiAl and CoAl
A strain rate change technique, developed previously for distinguishing between pure-metal and alloy-type creep behavior, was used to study the elevated-temperature deformation behavior of the intermetallic compounds NiAl and CoAl. Tests on NiAl were conducted at temperatures between 1100 and 1300 K while tests on CoAl were performed at temperatures ranging from 1200 to 1400 K. NiAl exhibits pure-metal type behavior over the entire temperature range studied. CoAl, however, undergoes a transition from pure-metal to alloy-type deformation behavior as the temperature is decreased from 1400 to 1200 K. Slip appears to be inherently more difficult in CoAl than in NiAl, with lattice friction effects limiting the mobility of dislocations at a much higher tmeperature in CoAl than in NiAl. The superior strength of CoAl at elevated temperatures may, therefore, be related to a greater lattice friction strengthening effect in CoAl than in NiAl.
Yaney, D. L.↗