Analytical solutions for transitional flow around hydrometeors: Implications for particle dynamics and atmospheric modeling
Explore the source record for details and available documents.
Talaei, Ahmad↗
SEARCH · Search NASA
Results for “Transitional flow”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Using X-ray radiography to study oxygen flow in a proton exchange membrane electrolyzer operating under balanced pressure conditions
Of the various water electrolyzer technologies, the proton exchange membrane electrolyzer (PEMWE) is one of the best solutions for producing clean hydrogen without releasing CO 2 . In order to allow for widespread use of clean hydrogen, it is necessary to decrease its cost, which is intrinsically related to system operation. Current PEMWE plants operate in differential mode, directly pressurizing hydrogen and benefiting from thermodynamic compression, which increases overall system efficiency. However, high differential pressure above 30 bar can cause membrane stress, resulting in membrane creeping and failure. Pressurizing the water and operating at balanced pressure allows hydrogen to be produced at higher pressures while preserving the integrity of the membrane and porous layers. Nevertheless, the impact of pressurizing water on PEMWE performance must be better understood to maximize performance under balanced pressure conditions. Here, this study examined the impact of water pressure on two-phase flow. A high-pressure electrolyzer setup was developed to perform operando X-ray radiography and examine oxygen transport with high temporal resolution. The imaging segmentation process, developed to capture bubble properties in the channel, was applied to a specific experiment. The results clearly showed that as pressure increased up to 30 bars, the initial bubbly flow transitioned to slug flow, which led to channel saturation with oxygen. This work demonstrates that two-phase flow in an electrolyzer can be studied using X-ray radiography, which has the advantages of fast measurements and the ability to probe dense materials, such as those required for pressurized electrolyzers.
Balanced high pressure operation↗
A review of fluids under nanoconfinement: Reactivity, geomechanics, phase transitions, and flow
Due to its many industrial applications, the physics associated with the nanoconfinement of fluids has garnered great attention from the scientific community in roughly the last fifteen years. One pioneer of that research has been the Multi-Scale Fluid-Solid Interactions in Architected and Natural Materials (MUSE) Energy Frontier Research Center, which produced more than 50 journal articles from 2018 to 2023. We structure the findings of MUSE into four categories and contextualize the work with the broader literature. Here, the four categories are (1) the dependence of chemical reactions on the degree of confinement, which given the lower freedom of motion of molecules yet improved availability of reaction sites generally lead to enhancement from bulk reactions; (2) the mechanical properties of the porous matrix, which are dependent on the heterogeneity of the system in terms of both composition and structure; (3) the phase transitions under nanoconfinement, which are influenced by the pore size and morphology, surface chemistry, and substrate composition; and (4) the physical controls of slip flow, which demonstrate the importance of several factors, such as wettability. These aspects of nanoconfinement are becoming clearer, but there are other elements such as mathematical theory that are still being developed.
58 GEOSCIENCES↗
Pressure-Gradient-Based RANS Model for Predicting Separation in Transitional and Turbulent Flows
Predicting flow separation poses a significant challenge for RANS models, particularly in transitional flows over airfoils. We propose a novel improvement to RANS models to predict incipient separation in both transitional and fully turbulent flows. Our approach modifies the eddy viscosity model in regions indicated by a pressure-gradient criterion that accounts for intermittency - determining whether the boundary layer is laminar or turbulent. This model demonstrates robust generalization across various airfoil shapes and Reynolds numbers. Applied to the NREL Phase VI wind turbine rotor, our model shows improved aerodynamic performance predictions compared to the baseline RANS model.
k-omega SST↗
Systems Analysis and Optimization of Circular PET Packaging Supply Chains in the United States: Environmental and Socioeconomic Impacts
Many actions are underway at global, national, and local levels to address the plastic waste problem and transition toward a circular economy of plastics. Studies evaluating environmental and socioeconomic impacts of such a transition are lacking. Here, the purpose of this study is to conduct a national systems analysis of polyethylene terephthalate (PET) packaging supply chains in the United States. Material flow data was combined with environmental and socioeconomic indicators to evaluate and compare the sustainability of the linear PET packaging supply chain, current (2019) supply chain, and possible future circular supply chain options in the United States. Environmentally optimal circular US PET packaging material flows showed 31% and 38% savings of GHG emissions and energy demand, respectively, with a circularity of 77% when compared with a linear supply chain. Additionally, the environmentally optimal system showed higher employment (29%) and wages (31%) than a linear system, but with a 5% decrease in revenue generation. A socioeconomically optimal circular PET supply chain showed increased employment (by 52%), wages (by 67%), and revenues (by 1%), with a circularity of 59% when compared with the linear system. However, it showed 14% higher GHG emissions than a linear system, indicating a trade-off between environmentally and socioeconomically optimal circular PET packaging systems. Overall, linear-to-circular material flow transition may not necessarily lead to increased revenues and decreased environmental impacts of the entire system, but it does benefit society due to increased employment and wages. Future systems analysis work should focus on improving data quality for environmental and socioeconomic dimensions.
PET↗
Modeling Flow in a Microreactor Core: From High-Fidelity CFD to Subchannel Analysis
The accurate prediction of pressure drop in tightly packed, low–Reynolds number (Re) bare rod bundles is essential for the thermal-hydraulic design of the Microreactor Applications Research Validation and EvaLuation (MARVEL) reactor and other microreactor concepts. However, existing friction factor correlations, particularly the upgraded Cheng-Todreas (UCTD) correlation, have limited validation for the small pitch-to-diameter ratios (P/Ds) and transitional flow conditions characteristic of these systems. In this work, we perform high-fidelity large-eddy simulations (LESs) of both an infinite bare rod bundle and a finite bare 37-pin scalloped rod bundle across the range 1000≤ 𝑅𝑒 ≤5500. The simulations reveal strong gap vortex–driven transitional behavior and indicate that the UCTD may underpredict the friction factor by up to 28% at 𝑃/𝐷 = 1.05. Using the LES-calculated pressure drops, we formulate a new friction factor correlation that follows the Cheng-Todreas functional form but is calibrated for low-Re and tightly packed geometries representative of a MARVEL-like reactor. The correlation is implemented in the MOOSE (Multiphysics Object-Oriented Simulation Environment) subchannel module and compared against both the LES and UCTD predictions. Across all subchannel types, the proposed model reduces the streamwise velocity differences from as high as 44% (UCTD) to below 9%, and decreases the pressure gradient differences from 13% to 25% (UCTD) to 0.7% to 7% relative to the LES results. These results suggest that the new correlation has the potential to improve the pressure drop and flow field predictions for such geometries, highlighting the importance of high-fidelity simulations in supporting microreactor thermal-hydraulic model development and motivating future pressure drop experiments for compact rod bundles to further validate these findings.
21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
Transition in ICF Capsule Implosions
Longstanding design and reproducibility challenges in inertial confinement fusion (ICF) capsule implosion experiments involve recognizing the need for appropriately characterized and modeled three-dimensional initial conditions and high-fidelity simulation capabilities to predict transitional flow approaching turbulence, material mixing characteristics, and late-time quantities of interest—e.g., fusion yield. We build on previous coarse graining simulations of the indirect-drive national ignition facility (NIF) cryogenic capsule N170601 experiment-a precursor of N221205 which resulted in net energy gain. We apply effectively combined initialization aspects and multiphysics coupling in conjunction with newly available hydrodynamics simulation methods, including directional unsplit algorithms and low Mach-number correction-key advances enabling high fidelity coarse grained simulations of radiation-hydrodynamics driven transition. Our presentation includes discussion of the capsule initialization and implosion dynamics, analysis of the vorticity production budget, transition signatures, quantities of interest—late-time ion temperature and fusion-neutron yield, numerical uncertainty quantification, and comparisons with NIF data.
42 ENGINEERING↗
Uniting Surface Properties With Hydrodynamic Roughness in Shallow Overland Flow Models
Describing flow resistance from the properties of an underlying surface is a challenge in surface hydrology. Runoff models must specify a resistance formulation or “roughness scheme”—describing the functional relationship between flow resistance and flow depth/velocity—and its parameters. Uncertainty in runoff predictions derives from both the selected roughness scheme (e.g., Darcy Weisbach, Manning's, or laminar flow equations), and its parameterization with a roughness coefficient (e.g., Manning's n). Both choices are informed by model calibration to data, usually discharge, and, if available, velocity. In this study, a Saint Venant Equation-based runoff model is calibrated to discharge and velocity data from 112 rainfall simulator experiments. The results are used to identify the optimal roughness scheme among four widely-used options for each experiment, and to explore whether surface properties can be used to select the optimal roughness scheme and its coefficient. Among the tested roughness schemes, a transitional flow equation provided the best fit to the plurality of experiments. The most suitable roughness scheme for a given experiment was not related to measured surface properties. Regression models predicted the calibrated roughness coefficients with adjusted values between 0.48 and 0.54, depending on the roughness scheme used. Litter cover was the best predictor of the roughness coefficient, followed by soil cover and average canopy gap size. The results suggest that selection of an optimal roughness scheme based on surface properties alone remains difficult, but that once a scheme is selected, roughness coefficients can be estimated from surface properties.
54 ENVIRONMENTAL SCIENCES↗
The Onset of Nucleate Boiling Prediction in a Mini Channel with the Eulerian Multiphase Flow
The prediction of boiling incipience is a critical issue for a reactor. Vapor lock causes operating instability and undesirable temperature rise, especially for small channels. This study uses the Eulerian multiphase flow boiling model to predict the onset of nucleate boiling in a millimeter scale rectangular channel. Two wall boiling models, namely the RPI (Rensselaer Polytechnic Institute) and the non-equilibrium sub cooled model are applied. Computational fluid dynamics is employed for this study to investigate the impact of operating conditions like liquid flow rate, operating pressure, heat flux, velocity profile, turbulence model, and inlet liquid temperature. Here, the effect of fundamental boiling parameters on the surface wall temperature and vapor volume fraction is also studied. The parameters under consideration are the bubble departure diameter, bubble departure frequency, nucleate site density, quenching time period, and interface heat transfer coefficients. A series of CFD calculations is conducted by varying the considered variables systematically in a wide range of flow conditions covering laminar, transition, and turbulent flows. The sub-component heat fluxes like the liquid convective, the vapor convective, the evaporative, and the quenching terms are monitored to infer the boiling dynamics in the transition region from the single-phase flow to the nucleate boiling zone. It is found that the CFD approach to detecting the boiling incipience point agrees reasonably with available experimental data. However, its limitations, like inaccuracy for lower flow rates and early transition to boiling flow, are also noticed due to the nature of the considered RPI model.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
High resolution numerical simulations of methane pool fires using adaptive mesh refinement
The ability to accurately predict the structure and dynamics of pool fires using computational simulations is of great interest in a wide variety of applications, including accidental and wildland fires. However, the presence of physical processes spanning a broad range of spatial and temporal scales poses a significant challenge for simulations of such fires, particularly at conditions near the transition between laminar and turbulent flow. Here, in this study, we examine the transition to turbulence in methane pool fires using high-resolution simulations with multi-step finite rate chemistry, where adaptive mesh refinement (AMR) is used to directly resolve small-scale flow phenomena. We perform three simulations of methane pool fires, each with increasing diameter, corresponding to increasing inlet Reynolds and Richardson numbers. As the diameter increases, the flow transitions from organized vortex roll-up via the puffing instability to much more chaotic mixing associated with finger formation along the shear layer and core collapse near the inlet. These effects combine to create additional mixing close to the inlet, thereby enhancing fuel consumption and causing more rapid acceleration of the fluid above the pool. We also make comparisons between the transition to turbulence and core collapse in the present pool fires and in inert helium plumes, which are often used as surrogates for the study of buoyant reacting flows.
42 ENGINEERING↗
Active nematic ratchet in asymmetric obstacle arrays
We numerically investigate the effect of an asymmetric periodic obstacle array in a two-dimensional active nematic. We find that activity in conjunction with the asymmetry leads to a ratchet effect or unidirectional flow of the fluid along the asymmetry direction. The directional flow is still present even in the active turbulent phase when the gap between obstacles is sufficiently small. We demonstrate that the dynamics of the topological defects transition from flow mirroring to smectic-like as the gap between obstacles is made smaller, and explain this transition in terms of the pinning of negative winding number defects between obstacles. This also leads to a nonmonotonic ratchet effect magnitude as a function of obstacle size, so that there is an optimal obstacle size for ratcheting at fixed activity.
36 MATERIALS SCIENCE↗
Integrating a Water Tracer Model Into WRF‐Hydro for Characterizing the Effect of Lateral Flow in Hydrologic Simulations
Abstract Most current land models approximate terrestrial hydrological processes as one‐dimensional vertical flow, neglecting lateral water movement from ridges to valleys. Such lateral flow is fundamental at catchment scales and becomes crucial for finer‐scale land models. To test the effect of incorporating lateral flow toward three‐dimensional representations of hydrological processes in the next generation land models, we integrate a water tracer model into the WRF‐Hydro framework to track water movement from precipitation to discharge and evapotranspiration. This hydrologic‐tracer integrated system allows us to identify the key mechanisms by which lateral flow affects the flow paths and transit times in WRF‐Hydro. By comparing modeling experiments with and without lateral routing in two contrasting catchments, we determine the impacts of lateral flow on the transit times of precipitation event‐water. Results show that with limited hydrologic connectivity, lateral flow extends the transit times by reducing (increasing) event‐water drainage loss (accumulation) in ridges (valleys) and allowing reinfiltration of infiltration‐excess flow, which is missing in most land models. On the contrary with high hydrologic connectivity, lateral flow can effectively accelerate the water release to streams and reduce the transit time. However, the transit times are substantially underestimated by the model compared with isotope‐derived estimates, indicating model limitations in representing flow paths and transit times. This study provides some insights on the fundamental differences in terrestrial hydrology simulated by land models with and without lateral flow representation.
54 ENVIRONMENTAL SCIENCES↗
Hydrodynamic fluctuations near a Hopf bifurcation: Stochastic onset of vortex shedding behind a circular cylinder
Here, we investigate hydrodynamic fluctuations in the flow past a circular cylinder near the critical Reynolds number Re c for the onset of vortex shedding. Starting from the fluctuating Navier-Stokes equations, we perform a perturbation expansion around Re c to derive analytical expressions for the statistics of the fluctuating lift force. Molecular-level simulations using the direct simulation Monte Carlo method support the theoretical predictions of the lift power spectrum and amplitude distribution. Notably, we have been able to collect sufficient statistics at distances Re / Re c – 1 = O (10 –3 ) from the instability that confirm the appearance of non-Gaussian fluctuations, and we observe that they are associated with intermittent vortex shedding. These results emphasize how unavoidable thermal-noise-induced fluctuations become dramatically amplified in the vicinity of oscillatory flow instabilities and that their onset is fundamentally stochastic.
42 ENGINEERING↗
Outflow Boundary Conditions for Turbine-Integrated Rotating Detonation Combustors
This study examines outflow boundary conditions (BCs) in computational fluid dynamics (CFD) simulations of a transition duct with and without guide vanes that converts supersonic flow exiting a rotating detonation combustor (RDC) to subsonic flow to drive a turbine. Since the flow exiting the transition duct has swirling shock waves with significant spatial and temporal variations in pressure, temperature, and Mach number, imposing proper BCs poses a challenge. To ensure all swirling shock waves exit the transition duct without creating non-physical reflected waves at its outlet, this study examined three outflow BCs: (1) the average pressure imposed at the duct’s outlet, (2) a nonreflecting BC (NRBC) with a specified average pressure imposed at the duct’s outlet, (3) the average pressure imposed at the outlet of an extension duct made up of a buffer layer and a sponge layer. This study is based on the three-dimensional, unsteady density-weighted-ensemble-averaged continuity, Navier–Stokes, and energy equations for a thermally perfect gas closed by the realizable k–ε model and “enhanced” wall functions. The results obtained show that imposing an average pressure at the transition duct’s outlet produces spurious waves that degrade the physical meaningfulness of the solution. When the NRBC was applied, swirling shock waves exited the duct’s outlet without creating spurious waves. However, its usage requires the gas to be thermally, as well as calorically, perfect, which this study shows could be a concern. By imposing the average pressure at the outlet of an extension duct, the gas does not need to be calorically perfect. The results obtained show the effects of the sponge layer’s length and coarsening ratio on damping nonuniformities in non-physical reflected waves to ensure the flow exiting the transition duct’s outlet can do so as if there are no boundaries present and has the desired average pressure—even though the BC is applied at the extension duct’s outlet.
gas turbines↗
Measurement of the properties of the dust acoustic wave in a magnetic field
We present the first experimental observations of the dust acoustic wave where the wave was observed to propagate in the directions of gravity and magnetic field when these directions were not aligned. The experiments were conducted in the Magnetized Dusty Plasma eXperiment facility using a novel electrode system that allows for the angle between gravity and the magnetic field to be varied in a controlled way. This letter reports on measurements in an rf glow discharge argon plasma environment where the angle between direction of gravity and the magnetic field is 45 $^{\circ }$ . When there was no applied magnetic field, the wave was observed to propagate in the direction of gravity. However, as the magnetic field increased and the ions transitioned from flowing in the direction of gravity to the direction of the magnetic field, a second wave emerged and two distinct waves were observed to simultaneously propagate, one in the direction of gravity and one in the direction of the magnetic field. As the magnetic field was further increased, the wave that propagated in the direction of gravity was suppressed and the wave was only observed to propagate in the direction of the applied magnetic field. We also observe that the speed and the kinetic temperature of the dust for the mode that propagated in the direction of gravity decreased with increasing magnetic field while the speed and the kinetic temperature of the dust for the mode that propagated in the direction of the magnetic field increased with increasing magnetic field. These measurements suggest that an ion-dust streaming instability is at least partially responsible for the high temperatures that have previously been observed in dusty plasmas when the dust acoustic wave is present.
Williams, J. D. (ORCID:000000025199707X)↗
Quantifying Energy Storage Density Utilization Trends in Redox Flow Battery Chemistries
The transition to new energy resources is driving the need for efficient energy storage. Redox flow batteries (RFBs) are a promising solution due to their flexible design and safer materials, particularly for long-duration storage applications. Despite these advantages, RFB technologies still have considerable room for growth in terms of utilizing all of their available energy storage density. Herein, we assess RFB energy storage density utilization trends for multiple chemistries by accounting for their unique thermodynamic limits, energy efficiencies, and charge capacity constraints. Of the RFBs chemistries analyzed, most still use less than 60% of their theoretical energy storage capacity. The conventional all-vanadium RFB was the closest to its thermodynamic limit available. Moreover, the volumetric footprint and electrolyte cost analyses demonstrate the real-world implications of these inefficiencies. This analysis further indicates that future studies would benefit from clearer reporting of two key quantities: discharge efficiency, which is more directly tied to practically recoverable energy density than round-trip energy efficiency, and state-of-charge or capacity-utilization limits, which govern access to theoretical storage capacity. More consistent reporting of these factors would improve the accuracy and comparability of energy storage utilization analyses across RFB chemistries.
battery energy storage↗
Flow reversal benchmark of a one-sided heated narrow rectangular channel with CATHARE and RELAP5
Flow reversal in narrow coolant channels can be a crucial phenomenon for the safety of research reactors with a downward nominal flow direction. During a loss of forced flow accident, the downward flow stagnates briefly before transitioning into an upward natural circulation flow. The fuel may be damaged if dryout occurs and threshold fuel and/or cladding temperatures are exceeded. A comprehensive study is provided for flow reversal in narrow rectangular channels by examining experimental data and conducting software model analyses. The literature on flow reversal was reviewed, and selected experimental datasets were used to benchmark against CATHARE and RELAP5 models and also compare the code calculations with each other. The experimental data comes from flow reversal tests conducted with a narrow rectangular channel with one-sided heating. The results were compared with experimental data for successful flow reversal tests and predicted dryout power for dryout conditions. Also, the study examined the effects of the pump coastdown period, inlet liquid temperature, system pressure, and localized pressure drops. The experimental results showed that shorter coastdown periods, reduced pressure drops, and lower coolant inlet temperatures increased the dryout power. However, the system pressure did not noticeably affect the results. The simulation results showed that both CATHARE and RELAP5 agreed with experimental data, capturing the trends of the experimental results. Slight differences between each code calculation, as well as the predicted and measured dryout powers, were attributed to experimental uncertainties and the modeling of physical phenomena such as wall nucleation, interfacial heat transfer, drag coefficients, and critical heat flux. Overall, this study provides an understanding of flow reversal and the prediction capabilities of thermal-hydraulics software models. In conclusion, a future study of the flow reversal benchmark of a narrow rectangular channel with two-sided heating may provide additional valuable insights.
CATHARE↗
Active Nematic Ratchet in Asymmetric Obstacle Arrays
We numerically investigate the effect of an asymmetric periodic obstacle array in a two-dimensional active nematic. We find that activity in conjunction with the asymmetry leads to a ratchet effect or unidirectional flow of the fluid along the asymmetry direction. The directional flow is still present even in the active turbulent phase when the gap between obstacles is sufficiently small. We demonstrate that the dynamics of the topological defects transition from flow-mirroring to smectic-like as the gap between obstacles is made smaller, and explain this transition in terms of the pinning of negative winding number defects between obstacles. This also leads to a non-monotonic ratchet effect magnitude as a function of obstacle size, so that there is an optimal obstacle size for ratcheting at fixed activity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗