Search NASA⌕ Search

SEARCH · Search NASA

Results for “Triple oxygen isotope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Towards a holistic sulfate-water-O2 triple oxygen isotope systematics

Triple oxygen isotope (∆^(17)O with δ^(18)O) signals of H2O and O2 found in sulfate of oxidative weathering origin offer promising constraints on modern and ancient weathering, hydrology, atmospheric gas concentrations, and bioproductivity. However, interpretations of the sulfate-water-O2 system rely on assuming fixed oxygen-isotope fractionations between sulfate and water, which, contrastingly, are shown to vary widely in sign and amplitude. Instead, here we anchor sulfate-water-O2 triple oxygen isotope systematics on the homogeneous composition of atmospheric O2 with empirical constraints and modeling. Our resulting framework does not require a priori assumptions of the O2- versus H2O-oxygen ratio in sulfate and accounts for the signals of mass dependent and mass independent fractionation in the ∆^(17)O and δ^(18)O of sulfate's O2-oxygen source. Within this framework, new ∆^(17)O measurements of sulfate constrain ~2.3Ga Paleoproterozoic gross primary productivity to between 6 and 160 times present-day levels, with important implications for the biological carbon cycle response to high CO2concentrations prevalent on the early Earth.

sulfate, oxygen isotopes, atmospheric oxygen, sulf↗
NASA NTRSDate not supplied

Constraints on triple oxygen isotope kinetics

Triple oxygen isotope measurements have been used as tracers for classifying meteorites, as indicators of atmospheric chemistry and as a proxy for primary productivity among other uses. These utilities rely on the mass dependency of most chemical reactions: δ17O is proportional to δ18O by roughly a factor of 0.5. However,in detail it is known that mass-dependency factorsvary. Constraints on mass dependency are well established for equilibrium isotope effects, but similar constraints for kinetic isotope effects are lacking.Here, we provide constraints for isotope effects generated by unidirectional chemical reactions (i.e. kinetic isotope effects, KIEs). A simplified Monte Carlo model is used to estimatethe range of kinetic isotope effects. It is found that the range of KIEs exceeds the range of equilibrium isotope effects such that some mass dependent kinetic isotope effects could be mistaken for being mass-independent. For the16O-17O-18O system,Δ′17Ovariations as large 0.8‰ can be generated from a single reaction step. Two case studies from published literature, on the thermal decomposition of calcite (CaCO3) and brucite (Mg(OH)2), are used to test the extreme limits of the modeled results. Isotope fractionationsgenerated fromdensity functional theory models of the surface reaction steps are shownto match the published data. The fractionation models are strictly mass dependent thus this result suggests thermal decomposition of calcite is also mass dependent. Although oxygen is the focus here, our approach applies to any system with more than two isotopes.

J. A. Hayles↗
NASA NTRSDate not supplied

Constraints on Triple Oxygen Isotope Kinetics

Triple oxygen isotope methods (e.g., using δ 18 O, and Δ′ 17 O) have been used to classify meteorites, to constrain atmospheric chemistry, and to estimate primary productivity, among other uses. Such utility relies on the mass dependency of most chemical reactions: δ 17 O is proportional to δ 18 O by roughly a factor of 0.5. However, in detail, mass-dependency factors vary. While constraints on mass dependency are well established for equilibrium isotope effects, similar constraints for kinetic isotope effects are lacking. Using an ab initio Monte Carlo approach (see envelopes in Figure 1), we find the range of kinetic isotope effects (i.e., resulting from unidirectional chemical reactions) contains and exceeds the range of accessible equilibrium isotope effects for the 16 O 17 O 18 O system (Hayles and Killingsworth, 2022). Accessible kinetic isotope effects can yield Δ′ 17 O variations as large 0.8 ‰ from a single kinetic fractionation step. Reactions that yield the largest deviations from equilibrium are those with the largest molecular mass difference between decomposition fragments, typically the two products such as a gas and solid generated from the thermal decomposition of an initial solid. Comparison of DFT transition state model results against previously published experiments on the thermal decomposition of calcite (CaCO 3 ) (Miller et al., 2002) and dehydroxylation of brucite (Mg(OH) 2 ) (Clayton and Mayeda, 2009) show they are matched with mass-dependent kinetic isotope effects. This approach can be applied to any system with more than two isotopes.

Oxygen isotopes↗
NASA NTRS2021

Constraints on Triple Oxygen Isotope Kinetics

Isotopic disequilibrium is not as well constrained as equilibrium, hindering interpretation of isotopic variations. Kinetic isotope effects, a subset of disequilibrium, are common in nature and have been assumed to be distinct from equilibrium and mass independent isotope effects based on underdeveloped criteria. Using basic physical principles, we provide needed mechanistic constraints on mass-dependent kinetic isotope effects for the triple oxygen isotope system. We find some kinetic isotope effects yield large isotopic variations, exceeding equilibrium, which could be mistaken for mass independent relationships. Meanwhile, other kinetic isotope effects are found to have triple oxygen isotope relationships that could be mistaken for equilibrium isotope effects. Comparison against prior case studies of thermal decomposition of calcite (CaCO3) and brucite (Mg(OH)2) further tests our results. Although oxygen is the focus here, our approach applies to any system with more than two isotopes.

Isotope Geochemistry↗
DOE OSTI2025

A Method for Rapid and Precise Triple Oxygen Isotope Measurements via High-Temperature Conversion to CO Followed by Nickel-Catalyzed CO to CO 2 Conversion and Laser Spectroscopy

Triple oxygen isotopic compositions ( 16 O, 17 O, 18 O) have conventionally been measured via isotope ratio mass spectrometry using O 2 as an analyte. Conversion of sample oxygen to O 2 typically utilizes fluorination chemistry or catalytic equilibration between CO 2 and O 2 . Recently, laser spectroscopy has become a viable alternative for triple oxygen isotope (Δ' 17 O) measurements due to its ease and rapid throughput. Laser spectrometers are currently available for Δ' 17 O analysis of either H 2 O or CO 2 as the analyte gas. So far, these instruments have been used to measure Δ' 17 O of water, carbonate (CO 2 liberated by acid digestion), and atmospheric CO 2 samples. Here, we present a new method for high-precision Δ' 17 O analysis of CO 2 via tunable infrared laser direct absorption spectroscopy that is compatible with a wider range of geochemically important materials. This approach involves converting sample oxygen to CO 2 in two steps. First, the sample oxygen is liberated and reduced to CO by high-temperature conversion at 1450 °C in the presence of excess elemental carbon. Then, CO is catalytically converted to CO 2 over hot nickel at 350 °C. The conversion process is rapid (10 to 30 min) and quantitative. Spectroscopic Δ' 17 O analysis of the resulting CO 2 takes approximately 45 min. By measuring several oxygen isotope standards, we demonstrate that the method is precise (1σ = 12 per meg for procedural replicates) and accurate (within 11 per meg of previously reported values). The method can be applied to most pyrolytic materials where quantitative oxygen conversion is attainable, such as sulfate, phosphate, nitrate, and oxide minerals, water, and organic molecules.

Ellis, Nicholas M. [University of California, Berk↗
DOE OSTI2023

Triple oxygen isotope compositions of globally distributed soil carbonates record widespread evaporation of soil waters

The stable isotopic composition of pedogenic carbonates is central to many studies of past climate and topography, providing a basis for our understanding of Earth's terrestrial history. A core assumption of many applications of oxygen isotope values (δ 18 O) of pedogenic carbonate is that they reflect the δ 18 O value of precipitation (rain/snow). Here, this assumption is violated if soil carbonates form in evaporated soil waters. In this work, we develop a means to identify evaporation in ancient soils using the triple oxygen isotope composition ( 16 O- 17 O- 18 O) of pedogenic carbonates.

58 GEOSCIENCES↗
NASA NTRSDate not supplied

Triple Oxygen Isotope Kinetics of Sulfate From Pyrite Oxidation

Sulfates from low temperature terrestrial and marine environments are out of equilibrium with their oxygen sources. Instead, oxygen isotope compositions of sulfate imply they are dominated by kinetic signatures of oxidative and reductive processes (Killingsworth et al., 2022) that are under-constrained compared to equilibrium effects (Hayles and Killingsworth, 2022). Consequently, the specific role of pyrite oxidation in setting the oxygen isotope composition of sulfate is also under-constrained. This scenario inhibits a more nuanced understanding of small variations in the oxygen isotopes of sulfate and their implications for tracing oxygen sources and sulfur cycle transformations, particularly in low-temperature relatively sulfate-limited freshwater systems such as rivers, lakes, aquifers, and mining-affected environments. To alleviate these knowledge gaps, we conduct pyrite oxidation experiments at time scales spanning minutes to years, analyze the triple oxygen isotope compositions (∆ 17 O and δ 18 O) of sulfate products, and interpret results using molecular modeling. Our preliminary results show isotopic relationships of 1) pyrite-derived sulfate ∆ 17 O reaching above the meteoric water line as its δ 18 O becomes lighter than water, and 2) sulfate ∆ 17 O and δ 18 O extending between water and O 2 . From these results we interpret a kinetic isotope effect between sulfate and water and mixing between sulfate end members containing most of their oxygen atoms from water and from O 2 .

Oxygen isotopes↗
NASA NTRS2021

3. Climbing to the Top of Mount Fuji: Uniting Theory and Observations of Oxygen Triple Isotope Systematics

The near-simultaneous discovery of both minor isotopes of oxygen in 1929 was a watershed moment for modern science, to say nothing of its impacts on isotope geochemistry. At the time, oxygen was the international standard for atomic weight, as it had been for over twenty-five years. However, chemists and physicists had grown fond of different definitions: physicists used the weight of the 16O atom, while chemists used half the weight of atmospheric oxygen (O2) to define the precise weight of 16 atomic mass units. While they usually avoided direct conflicts, these contrasting definitions found an unexpected impasse in the near-infrared absorption spectrum of atmospheric oxygen: it contained a series of faint lines that could not be explained by any known atmospheric constituents.

Laurence Y. Yeung↗
NASA NTRSDate not supplied

Constraints on triple oxygen isotope kinetics

The general assumption that systems are in equilibrium is convenient, but imperfect. Instead, the partial or full expression of kinetic reaction steps may need to be determined. Using an isotope fractionation Monte-Carlo model under the harmonic approximation (Figure 1 envelopes), we find the range of kinetic isotope effects (i.e., resulting from unidirectional chemical reactions) contains and exceeds the range of accessible equilibrium isotope effects. For the 16O-17O-18O system, accessible kinetic isotope effects can yield Δ′17O variations as large 0.8‰ from a single kinetic fractionation step. Reactions that yield the largest deviations from equilibrium are those with the largest molecular mass difference between decomposition fragments, typically the two products, such as a gas and solid generated from the thermal decomposition of an initial solid. For example, previously published experiments on the thermal decomposition of calcite (CaCO3) and dehydroxylation of brucite (Mg(OH)2) are matched by density functional theory models of each kinetic isotope effect, thus revealing their origin in mass-dependent reaction. Beyond oxygen, our approach applies to any system with more than two isotopes.

Oxygen isotopes↗
NASA NTRS2019

Consensus on Aquatic Primary Productivity Field Protocols for Satellite Validation and Model Synthesis

The NASA PACE project, in conjunction with the IOCCG, EUMETSAT, and JAXA, have initiated an Aquatic Primary Productivity working group, with the aim to develop community consensus on multiple methods for measuring aquatic primary productivity used for satellite validation and model synthesis. A workshop to commence the working group efforts was held December 05-07, 2018 at the University Space Research Association headquarters in Columbia, MD U.S.A., bringing together 26 active researchers from 16 institutions. The group discussed the primary differences, nuances, scales, uncertainties, definitions, and best practices for measurements of primary productivity derived from in situ/on-deck/laboratory radio/stable isotope incubations, dissolved oxygen concentrations (from incubations or autonomous platforms such as floats or gliders), oxygen-argon ratios, triple oxygen isotope, natural fluorescence, and FRRF/ETR/kinetic analysis. These discussions highlighted the necessity to move the community forward towards the establishment of climate-quality primary productivity measurements that follow uniform protocols, which is imperative to ensure that existing and future measurements can be compared, assimilated, and their uncertainties determined for model development and validation. The specific deliverable resulting from of this activity will be a protocol document, published in coordination with the IOCCG. This presentation will discuss the findings of the meeting, and address future activities of the working group.

Vandermeulen, Ryan A.↗
NASA NTRS2024

Precipitation -17 O-Excess Altered During Tropical Convection: Evidence From Monsoon Cold Surges in Singapore

Despite the recent recognition of -17 O-excess as a promising new tracer for hydrological processes, our knowledge of the control mechanisms underlying -17 O-excess in tropical regions remains limited. To understand how microphysical processes during tropical convection affect precipitation isotope ratios, particularly -17 O-excess, in Singapore, we collected precipitation samples at minute intervals from six rain events associated with cold surges during the Northeast Monsoon seasons and analyzed their triple oxygen isotopes. Our results show that precipitation δ -18 O decreases in the convective zones and then gradually increases in the stratiform zones, while d-excess exhibits an inverse trend. This correlation between δ -18 O and d-excess indicates that rain evaporation plays a crucial role in regulating precipitation isotopes. Moreover, the rain events with a higher upstream rainout amount have lower δ -18 O and higher -17 O-excess values, suggesting that precipitation δ -18 O and -17 O-excess likely reflect the integrated upstream convective activity. Microphysical processes associated with upstream convection, such as rain evaporation and vapor recycling, are potential mechanisms that increase -17 O-excess values along moisture transport pathways for a rain event, and hence, undermine the effectiveness of -17 O-excess as a tracer of moisture source humidity. Contrary to the negative correlation observed in monthly precipitation, there is generally a positive correlation between d-excess and -17 O-excess at the event scale. However, this correlation weakens as convective rain intensifies, suggesting that stronger convection can attenuate the positive correlation between d-excess and -17 O-excess. Therefore, it is crucial to consider how tropical convection alters -17 O-excess when utilizing this tracer to interpret atmospheric dynamics and hydrological processes.

tropical weather systems↗
NASA NTRSDate not supplied

Identifying Sources of Sulfate Preserved in High Elevation Lava Tubes From Mauna Loa, Hawaii

Volcanic sulfates record a history of their formation pathways in their triple oxygen isotope compositions, making them a powerful target for understanding atmospheric chemistry. To understand how these isotopic signals may be preserved in sulfate minerals, we investigate multiple O and S isotopes of thenardite, mirabilite, and gypsum from in a Mars analog environment: a pair of lava tubes near the summit of Mauna Loa, Hawaii. Based on 16 O-, 17 O- 18 O compositions, the primary oxygen sources for sulfates in the lava tube are atmospheric oxygen (O 2 ), peroxide (H 2 O 2 ), and ozone (O 3 ). We suggest the isotopic signature of O 2 originates from combustion of reduced sulfur gases and/or elemental sulfur at the eruptive source or within the lava tube soon after skylight collapse. Sulfate with isotopic signatures of peroxide and ozone are typically expected from aqueous reactions in cloud droplets. Chemical modeling indicates the observed proportion of ozone sourced sulfate requires pH greater than ~5.4, higher than measured cloud water pH, instead suggesting the observed O 3 signature could not have formed in cloud water droplets. We interpret that sulfate possessing an ozone signature in the lava tube sulfates formed on wetted surfaces of the lava tubes with alkalinity from alteration of basaltic glass. Furthermore, the oxygen and sulfur isotopes of the sulfate are uncorrelated. Multiple sulfur isotopes ( 32 S- 33 S- 34 S- 36 S) from the Mauna Loa sulfates are consistent with ocean island basalt from Pitcairn, suggesting the sulfate-sulfur has not been modified compared to its volcanic source. The findings of this study indicate that oxidation by ozone plays a key role in the formation of sulfate within lava tubes. We also find that combustion is a significant pathway toward sulfuric acid formation in volcanic environments. Similar signatures should be expected on other planets if volcanism is a significant sulfate source, as has been suggested for Mars. If true, sulfates in returned samples from Mars may hold key information on pO 2 , pCO 2 and planetary scale oxygen fluxes at the time of sulfate formation.

Justin Hayles↗
DOE OSTI2024

Triple oxygen and hydrogen stable isotope composition of water in Murchison carbonaceous chondrite accessed by thermogravimetry-enabled laser spectroscopy

For this work, we have developed the capability to measure 17 O/ 16 O in H 2 O and OH - of hydrous minerals by a technique using thermogravimetric analysis coupled with isotope ratio infrared spectroscopy (TGA-IRIS) on a suite of liquid water standards, terrestrial mineral standards, multi-mineral synthetic mixtures of terrestrial samples, and Murchison carbonaceous chondrite. This 17 O/ 16 O analytical capability is combined with the previously developed TGA-IRIS capability of 18 O/ 16 O, which enables us to calculate Δ `17 O values. Additionally, we have made 2 H/ 1 H measurements by TGA-IRIS on the suite of materials. Analyses of 328 standard water samples sealed into silver tubes (0.25 μL, 174 VSMOW and 154 GISP) analyzed over the course of three years yielded δ 18 O values by TGA-IRIS with precision of ±0.30 ‰, δ 17 O of ±0.24 ‰, Δ `17 O of ±0.126 ‰, and δ 2 H ± 7.5 ‰ (± 1 Std. Dev.). TGA-IRIS analyses of a suite of hydrous minerals (oxy-hydroxide, mica, serpentines, sulfide, phyllosillicates) yields similar precision. TGA-IRIS analyses of the CM2 carbonaceous chondrite Murchison resulted in δ 18 O, δ 17 O, Δ `17 O, and δ 2 H values of the H 2 O and/or OH - from its hydrous minerals. Δ `17 O values of Murchison H 2 O range from 1.034 ‰ at 350 °C, to -0.368 ‰ at 650 °C, to -1.75 ‰ at 850 °C. TGA-IRIS can generate Δ `17 O values of H 2 O and/or OH - in hydrous materials that are well within the precision needed for the analysis of meteoritic samples, as well as samples returned from asteroids, such as Ryugu and Bennu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Triple oxygen and hydrogen stable isotope composition of hydroxyl water in Orgueil (CI-type) and Tagish Lake (C2-type) carbonaceous chondrites

The primitive carbonaceous chondrites are of interest to cosmochemical science because they contain relatively large amounts of ‘water’ (H 2 O and/or OH – ) within phyllosilicate minerals. This water is evidence for the accretion of ices by their parent planetesimals, and thus represents an archive of the isotopic compositions of H 2 O in the protoplanetary environments. Here, in this study, we used thermogravimetry-enabled laser spectroscopy (TGA-IRIS) analyses of the Orgueil and Tagish Lake meteorites to make δ 2 H, δ 18 O, and Δ′ 17 O measurements of the H 2 O and OH – contained in the different hydrous minerals that comprise each meteorite. In Orgueil, we measured mass-weighted averages of OH – in the saponite and serpentine phyllosilicate matrix to be δ 2 H = 192 ‰, δ 18 O = 1.5 ‰, which are unquestionably of extraterrestrial origin with Δ′ 17 O = 1.0 ‰. For Tagish Lake, analogous values of OH– in the saponite and serpentine phyllosilicate matrix are δ 2 H = 704 ‰, δ 18 O = 11.3 ‰, and are similarly unambiguously extraterrestrial with Δ′ 17 O = 0.82 ‰. We estimate that the parent H 2 O involved in aqueous alteration of Orgueil had δ 18 O value ≥ +23 ‰. In Orgueil, we interpret the phyllosilicate petrographic relationships, and the δ 18 O values of OH – in saponite and serpentine to indicate that saponite formed first, at a lower temperature by 35 to 53 °C than serpentine. This suggests that the Orgueil parent body experienced increasing temperature during the phase of active aqueous alteration (prograde) which set the δ 18 O OH values of the serpentine and saponite. In the case of Tagish Lake, serpentine formed at a lower temperature by 32 to 60 °C than saponite, for the simplest case with constant δ 18 O H2O values. If serpentine formed first, followed by saponite formation at 32 to 60 °C °C higher temperature, this suggests that Tagish Lake sample TL1 underwent prograde aqueous alteration as the parent body heated up. We find evidence that the parent H 2 O for Orgueil, Tagish Lake sample TL1, and Murchison (based on data from a previous study) may have had Δ′ 17 O values of >0.64 ‰.

Aqueous alteration↗
NASA NTRS2012

The Carbonates in ALH 84001 Record the Evolution of the Martian Atmosphere Through Multiple Formation Events

Current Martian conditions restrict the presence of liquid water due to low temperatures (approx 210K), a thin atmosphere (approx 7mb), and intense UV radiation. However, past conditions on Mars may have been different with the possibility that the ancient Martian climate was warm and wet with a dense CO2 atmosphere. The cycling of carbon on Mars through atmospheric CO2 and carbonate minerals is critical for deciphering its climate history. In particular stable isotopes contained in carbonates can provide information of their origin and formation environment as well as possibly hinting at the composition of global reservoirs such as atmospheric CO2. Martian meteorite ALH 84001 contains widely studied carbonate rosettes that have been dated to approx. 3.9 Ga and have been used to interpret climatic conditions present at that time. However, there is mount-ing evidence for multiple episodes of carbonate formation in ALH 84001 with potentially distinct isotopic compositions. This study seeks to tease out these different carbonate assemblages using stepped phosphoric acid dissolution and analysis of carbon and triple oxygen stable isotopes. In addition, we report SIMS analyses of the delta O-18 several petrographically unusual carbonate phases in the meteorite.

Shaheen, R.↗
DOE OSTI2020

Low-energy cross-section measurement of the B 10 ( α , n ) N 13 reaction and its impact on neutron production in first-generation stars

Nucleosynthesis in the first generation of massive stars offers a unique setting to explore the creation of the first heavier nuclei in an environment free of impurities from earlier stellar generations. In later generations of massive stars, hydrogen burning occurs predominantly through the CNO cycles, but without the carbon, nitrogen, and oxygen to catalyze the reaction sequence, first stars would have to rely on the inefficient pp chains for their energy production. Observations of second and third generation stars show pronounced abundances of carbon and oxygen isotopes, which suggests a rapid conversion of the primordial abundances to heavier elements. While the triple-alpha-process primarily facilitates this conversion, there are alternative reaction sequences, such as 2 H(α,γ) 6 Li(α,γ) 10 B(α,n) 13 N, that may play a significant role. To study such alternate reaction pathways for production of carbon and heavier nuclei, a number of new measurements are needed. In this work, new measurements are reported for the 10 B(α,n) 13 N reaction, extending the cross section down to 575 keV incident α-particle energy. The measurements were made using a state-of-the-art deuterated liquid scintillator and a spectrum unfolding technique. An R-matrix analysis was performed in order to facilitate a comparison of the underlying nuclear structure with the reaction measurements. An unexpected upturn is observed in the low-energy S factor that indicates the presence of a new low-energy resonance. Finally, a revised reaction rate is determined that takes into account the present data as well as other previous measurements from the literature that were previously neglected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2001

Beagle 2: The Next Exobiology Mission to Mars

Beagle 2 is a 60 kg probe (with a 30 kg lander) developed in the United Kingdom for inclusion on the European Space Agency's 2003 Mars Express. Beagle 2 will deliver to the Martian surface a payload which consists of a high percentage of science instruments to landed spacecraft mass. Beagle 2 will be launched in June, 2003 with Mars Express on a Soyuz-Fregat rocket from the Baikonur Cosmodrome in Kazakhstan. Beagle 2 will land on Mars on December 26, 2003 in the Isidis Planitia basin (approximately 10 degrees N and 275 degrees W), a large sedimentary basin that overlies the boundary between ancient highlands and northern plains. Isidis Planitia, the third largest basin on Mars, which is possibly filled with sediment deposited at the bottom of long-standing lakes or seas, offers an ideal environment for preserving traces of life. Beagle 2 was developed to search for organic material and other volatiles on and below the surface of Mars in addition to the study of the inorganic chemistry and mineralogy. Beagle 2 will utilize a mechanical mole and grinder to obtain samples from below the surface, under rocks and inside rocks. A pair of stereo cameras will image the landing site along with a microscope for examination of surface and rock samples. Analyses will include both rock and soil samples at various wavelengths, X-ray spectrometer and Mossbauer spectrometer as well as a search for organics and other light element species (e.g. carbonates and water) and measurement of their isotopic compositions. Beagle 2 has as its focus the goal of establishing whether evidence for life existed in the past on Mars at the Isidis Planitia site or at least establishing if the conditions were ever suitable. Carbonates and organic components were first recognized as existing on Mars when they were found in the Martian meteorite Nakhla. Romanek et al showed the carbonates in ALH84001 were formed at low temperatures. McKay et al noted possible evidence of early life on Mars within the ALH84001 meteorite. Thomas-Keprta et al showed the magnetite biomarkers in ALH84001's carbonates are indistinguishable from those formed by magnetotactic bacteria found on Earth. Gibson et al showed there was significant evidence for liquid water and biogenic products present on Mars across a 3.9 billion year period. A mechanical arm (PAW) operates from the lander and is used for science operations along with sample acquisition. Instruments attached to the PAW include: stereo cameras, Mossbauer instrument, X-ray fluorescence instrument, microscope, environmental sensors, rock corer/grinder, a spoon, mirror, brushes, a mole attachment for acquisition of subsurface to depths of 1 to 2 meters and an illumination device. Each camera has 14 filters which have been optimized for mineralogy composition, dust and water vapor detection. The microscope's camera is designed for viewing the size and shape of dust particles, rock surfaces, microfossils, and characteristics of the samples prior to introduction into the gas analysis package (GAP). The camera has a resolution of 4 microns/pixel, features four color capability (red, green, blue and UV (ultraviolet) fluoresence), a depth of focus of 40 micrometers and translation stage of +3 millimeters. The heart of the Beagle 2's life detection package is the gas analysis package (GAP), which consists of a mass spectrometer with collectors at fixed masses for precise isotopic ratio measurements and voltage scanning for spectral analysis. Primary aim of the GAP is to search for the presence of bulk constituents, individual species, and isotopic fractionations for both extinct and extent life along with studying the low-temperature geochemistry of the hydrogen, carbon, nitrogen and oxygen components on Mars from both the surface and atmosphere. GAP is a magnetic sector mass spectrometer with the range of 1 to 140 amu which can be operated in both the static and dynamic modes. A triple Faraday collector array will be used for C, N and O ratios along with a double Faraday array for H/D. Pulse counting electron multiplier will be utilized for noble gases and selected organics. Anticipated detection limits are at the picomole level for operation in the static mode of operation and high precision isotopic measurements will be made in the dynamic mode. Sample processing and preparation system consists of reaction vessels along with references. Sample ovens capable of being heated are attached to the manifold for sample combustion. Surface, subsurface materials and interior rock specimens will be combusted in pure oxygen gas at various temperature intervals to release organic matter and volatiles. Combustion process will permit detection of all forms and all atoms of carbon present in the samples. A chemical processing system is capable of a variety of conversion reactions. Gases are manipulated either by cryogenic or chemical reactions and passed through the gas handling portion of the vacuum system. There are two modes of operation: quantitative analysis and precise isotopic measurements. Additional information is contained in the original extended abstract.

Gibson, Everett K., Jr.↗