Search NASA⌕ Search

SEARCH · Search NASA

Results for “U3Si”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Materials Data on U3Si by Materials Project

U3Si is Uranium Silicide structured and crystallizes in the cubic Pm-3m space group. The structure is three-dimensional. U is bonded to eight equivalent U and four equivalent Si atoms to form distorted UU8Si4 cuboctahedra that share corners with twelve equivalent UU8Si4 cuboctahedra, edges with eight equivalent SiU12 cuboctahedra, edges with sixteen equivalent UU8Si4 cuboctahedra, faces with four equivalent SiU12 cuboctahedra, and faces with fourteen equivalent UU8Si4 cuboctahedra. All U–U bond lengths are 3.01 Å. All U–Si bond lengths are 3.01 Å. Si is bonded to twelve equivalent U atoms to form SiU12 cuboctahedra that share corners with twelve equivalent SiU12 cuboctahedra, edges with twenty-four equivalent UU8Si4 cuboctahedra, faces with six equivalent SiU12 cuboctahedra, and faces with twelve equivalent UU8Si4 cuboctahedra.

36 MATERIALS SCIENCE↗

Materials Data on U3Si by Materials Project

U3Si is beta Cu3Ti-like structured and crystallizes in the tetragonal I4/mcm space group. The structure is three-dimensional. there are two inequivalent U sites. In the first U site, U is bonded to eight equivalent U and four equivalent Si atoms to form distorted UU8Si4 cuboctahedra that share corners with twelve equivalent UU8Si4 cuboctahedra, edges with eight equivalent SiU12 cuboctahedra, faces with four equivalent SiU12 cuboctahedra, and faces with six equivalent UU8Si4 cuboctahedra. There are four shorter (2.86 Å) and four longer (3.15 Å) U–U bond lengths. All U–Si bond lengths are 3.01 Å. In the second U site, U is bonded in a 12-coordinate geometry to eight U and four equivalent Si atoms. All U–U bond lengths are 3.02 Å. All U–Si bond lengths are 3.01 Å. Si is bonded to twelve U atoms to form SiU12 cuboctahedra that share corners with twelve equivalent SiU12 cuboctahedra, edges with eight equivalent UU8Si4 cuboctahedra, faces with four equivalent UU8Si4 cuboctahedra, and faces with six equivalent SiU12 cuboctahedra.

36 MATERIALS SCIENCE↗

Materials Data on U3Si by Materials Project

U3Si is beta Cu3Ti-like structured and crystallizes in the triclinic P1 space group. The structure is three-dimensional. there are six inequivalent U sites. In the first U site, U is bonded in a 4-coordinate geometry to eight U and four Si atoms. There are a spread of U–U bond distances ranging from 2.90–3.14 Å. All U–Si bond lengths are 3.01 Å. In the second U site, U is bonded in a 4-coordinate geometry to eight U and four Si atoms. There are a spread of U–U bond distances ranging from 2.90–3.14 Å. All U–Si bond lengths are 3.01 Å. In the third U site, U is bonded in a 12-coordinate geometry to eight U and four Si atoms. There are two shorter (2.81 Å) and two longer (3.19 Å) U–U bond lengths. All U–Si bond lengths are 3.01 Å. In the fourth U site, U is bonded in a 12-coordinate geometry to eight U and four Si atoms. There are a spread of U–U bond distances ranging from 2.81–3.18 Å. All U–Si bond lengths are 3.01 Å. In the fifth U site, U is bonded in a 12-coordinate geometry to eight U and four Si atoms. There are three shorter (3.01 Å) and one longer (3.02 Å) U–Si bond lengths. In the sixth U site, U is bonded in a 12-coordinate geometry to eight U and four Si atoms. There are two shorter (3.01 Å) and two longer (3.02 Å) U–Si bond lengths. There are two inequivalent Si sites. In the first Si site, Si is bonded to twelve U atoms to form a mixture of corner and face-sharing SiU12 cuboctahedra. In the second Si site, Si is bonded to twelve U atoms to form a mixture of corner and face-sharing SiU12 cuboctahedra.

36 MATERIALS SCIENCE↗

Performance of U 3 Si–Al dispersion fuel at HANARO full-power condition

The irradiation performance of U3Si dispersion fuel in an Al matrix, U3Si-Al, under the Hi-Flux Advanced Neutron Application Reactor (HANARO) design full-power condition of 30 MW was tested for full-power qualification of the fuel. A test assembly was fabricated containing 18 fuel rods made with atomized U3Si powder manufactured at the Korea Atomic Energy Research Institute. The test assembly was irradiated for 188 full-power operation days in the HANARO subject to the normal fuel-loading scheme and achieved about 60 at% U-235 average burnup and 75 at% U-235 peak burnup. The maximum linear power of the test assembly was 98 kW/m. Nondestructive and destructive postirradiation examinations were conducted. The measured postirradiation examination data were compared with data from previous irradiations and the design criteria required for HANARO fuel. Consequently, it was concluded that in-pile performance was acceptable and fuel integrity was maintained, and the behavior satisfied the fuel design requirements.

Chae, Heetaek↗

Assessment of semi-empirical potentials for the U-Si system

Accident tolerant fuels (ATF) are being developed in response to the Fukushima Daiichi accident in Japan. One of the options being pursued is U-Si fuels, such as the U 3 Si 2 and U 3 Si 5 compounds, which benefit from high thermal conductivity (metallic) compared to the UO2 fuel (semi-conductor) used in current Light Water Reactors (LWRs). The U-Si fuels also have higher fissile density. In order to perform meaningful engineering scale nuclear fuel performance simulations, the material properties of the fuel, including the response to irradiation environments, must be known. Unfortunately, the data available for U-Si fuels are rather limited, in particular for the temperature range where LWRs would operate. The ATF HIP is using multi-scale modeling and simulations to address this knowledge gap. Even though Density Functional Theory (DFT) calculations can provide useful answers to a subset of problems, they are computationally too costly for many others, including properties governing microstructure evolution and irradiation effects. For the latter, semi-empirical potentials are typically used. Unfortunately, there is currently no potential for the U-Si system. In this brief report we present initial results from the development of a U-Si semi-empirical potential based on the Modified Embedded Atom Method (MEAM). The potential should reproduce relevant parts of the U-Si phase diagram as well as defect properties important in irradiation environments. This work also serves as an assessment of the general challenges associated with the U-Si system, which will be valuable for the efforts to develop a U-Si Tersoff potential undertaken by Idaho National Laboratory (also part of the ATF HIP). Going forward the main potential development activity will reside at INL and the work presented here is meant to provide input data and guidelines for that activity. The main focus of our work is on the U 3 Si 2 and U3Si 5 compounds, because they are the main nuclear fuel candidates. U 3 Si 5 is derived from USi 2 in the AlB 2 structure by creating 1/6 vacant sites on Si sublattice. The ordering of these vacancies will not be studied in any detail here.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Thermal Neutron Scattering Cross Section of Uranium Silicide with Ab Initio Lattice Dynamics

Uranium silicide (U 3 Si 2 ) is a candidate material for the high-density nuclear fuel in commercial light water reactors [1], [2]. Its higher uranium density, 11.3 g-U/cm3, compared to that of uranium dioxide (UO 2 ), 9.7 g-U/cm3, can improve the performance of a nuclear reactor while using low enriched uranium (LEU) and diversify the choice of cladding materials [1]–[3]. It also has a higher thermal conductivity than UO 2 , which can reduce the thermal stress on the material caused by a temperature gradient across the fuel pellet and provide a larger margin for some postulated accidents [1], [2], [4]. Furthermore, compared to U3Si, another high-density fuel candidate, it has better resistance to in-pile swelling due to less irradiation-induced rapid amorphization [1], [3]. Corresponding to its importance in nuclear engineering, many previous studies have reported the properties of U3Si2. Experiments showed that U 3 Si 2 is a paramagnetic (PM) metal, where a slight linear increase in magnetic susceptibility was measured with increasing temperature [5], [6]. In addition, thermodynamic quantities such as thermal expansion coefficient, heat capacity, and thermal conductivity were experimentally determined over a wide temperature range [1], [7], [8]. In several computational studies, ab initio atomistic simulations based on density functional theory (DFT) were performed to calculate various properties including elastic constants, electronic density of states (DOS), and phonon dispersion curves [9]–[12]. Nevertheless, thermal neutron scattering cross sections, which are critical to the prediction of the parameters in reactor physics that are ultimately related to reactor criticality, have not yet been evaluated for U3Si2. The scattering cross section can be calculated from the phonon DOS, or the energy spectrum of lattice vibrations, of the crystalline system [13], [14]. However, there is also no experimental data available for the phonon DOS of U 3 Si 2 . While some computational studies reported the phonon DOS and/or dispersion curves from ab initio simulations [9]–[12], the accuracy cannot be guaranteed because it is unclear whether the spin-polarization behavior of PM U 3 Si 2 was properly described. In the present study, the thermal neutron scattering cross section for U 3 Si 2 is evaluated for the first time by calculating the phonon DOS for U3Si2 from ab initio lattice dynamics (AILD) simulations based on DFT. First, U 3 Si 2 is modeled based on the experimental structure, and AILD simulations are performed on the modeled U3Si2 to optimize the structure. Next, AILD simulations are performed for supercells with atomic displacement to calculate Hellmann-Feynman forces. Based on the calculated forces, partial phonon DOSs for U and Si are obtained, and the thermal neutron scattering law (TSL) for U 3 Si 2 is finally evaluated. To verify the accuracy of the calculations in the present study, the calculation results are compared with experimental data on the structure and heat capacity of U3Si2 [1], [7], [8], [15].

Geometry Optimization↗

Development of molecular dynamics potential for uranium silicide fuels

Use of uranium–silicide (U-Si) in place of uranium dioxide (UO2) is one of the promising concepts being proposed to increase the accident tolerance of nuclear fuels. This is due to a higher thermal conductivity than UO2 that results in lower centerline temperatures. U-Si also has a higher fissile density, which may enable some new cladding concepts that would otherwise require increased enrichment limits to compensate for their neutronic penalty. However, many critical material properties for U-Si have not been determined experimentally. For example, silicide compounds (U3Si2 and U3Si) are known to become amorphous under irradiation. There was clear independent experimental evidence to support a crystalline to amorphous transformation in those compounds. However, it is still not well understood how the amorphous transformation will affect on fuel behavior. It is anticipated that modeling and simulation may deliver guidance on the importance of various properties and help prioritize experimental work. In order to develop knowledge-based models for use at the engineering scale with a minimum of empirical parameters and increase the predictive capabilities of the developed model, inputs from atomistic simulations are essential. First-principles based density functional theory (DFT) calculations will provide the most reliable information. However, it is probably not possible to obtain kinetic information such as amorphization under irradiation directly from DFT simulations due to size and time limitations. Thus, a more feasible way may be to employ molecular dynamics (MD) simulation. Unfortunately, so far no MD potential is available for U-Si to discover the underlying mechanisms. Here, we will present our recent progress in developing a U-Si potential from ab initio data. This work is supported by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program funded by the U.S. Department of Energy, Office of Nuclear Energy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗